2A2FH-HS-06Star lights

  Thank you for choose Galaxy Star Projector. Read all information below before use so that you can use it properly. MODEL NO: HS-06 Galaxy Star Projector User Manual Power ButtonMode SwitchVolume UpVolume Down Power Button Laser Adjustment Mode LED Color Red LED Color Blue LED Light Fast Movement LED Light Slow Movement Time-Switch O Bluetooth Mode On/O Previous Song Next Song Volume+ LED Color Green LED Color White Voice Control LED Flash LED Brightness Adjustment LED Colorful Light Breath Mode LED Light Static Breath Mode Turn O after 2H Turn O after 1H Pause/Play Volume Remote control instructions: LED light switch click to turn on or o the lights Laser switch, click to turn on to turn o the laser light Press the red, green, blue and white buttons to turn on or o the corresponding lights Volume adjustment, click to increase or decrease volume Motor speed adjustment, press S+ to turn on the motor slowly, then press S+ to increase the speed, press S- to turn o the motor The brightness of the lamp is adjusted to three levels. The brightness of the power-on is 100%. Press it once to 60%, press 30% again, press it again to 60%, press 100% again, and the cycle continues. Galaxy Star Projector Remote ControlUSB Cable 01 PRODUCT DESCRIPTION 02 FUNCTION BUTTON 03 REMOTE CONTROL Fantastic Light Show Color Black / White Style Red Green Blue White Light Source Type LED Power Source Corded Electric Controller Type Remote Control Wattage 6.5 Watts Remote Control Distance 5 M 1.Press and hold the rst button for 2 seconds to turn on or turn o, and short press the Bluetooth audio function when it is turned on; 2.The second button is to switch the lighting mode, short press to switch between bright monochrome, monochrome red, green, blue and white breathing slowly, colorful light breathing slowly, voice control change mode, long press to switch the laser light; 3.Short press the third button to decrease the volume, long press the previous song; (the third button silkscreen is -) 4.Short press the fourth button to increase the volume, long press a song; (the silk screen of the fourth button is +) 1.Do not modify or repair this product. 2.It is forbidden to use voltages other than 120V AC, which may cause damage, re and electric shock. 3.Do not excessively bend, pull or twist the power cord, which may damage the power cord and cause a re. 4.Do not expose the host to rain or other liquids. 5.Do not touch the power plug with wet hands. 6.Do not use the device in the place which with propane, gas, natural gas, or any other ammable. 7.Please keep the device stored in dry places. FREE 2 - YEARS ACTIVATE WARRANTY Prime Membership Benets Welcome to Join The Club Membership Program Join Shop Members to Enjoy Exclusive Rights Member Gift Giveaway Gift Member ShoppingPrivilege More Dedicated customer service New Releases http://www.aoogmall.com Activate here 7-days Extend warranty for 1-year WARRANTY CARD Need help? Contact [email protected] Scan or Enter Online-warranty.net 04 PRODUCT SPECIFICATION 06 SAFETY INSTRUCTIONS 05 USER MANUAL FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the follow ing two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, inc luding interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentia l installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televis ion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technic ian for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be insta lled and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

C5266091_X8_Ed.1 1/1 LetterofAuthorization <ShenzhenshiyonganbaoTechnologyCo.,Ltd> Company:ShenzhenshiyonganbaoTechnologyCo.,Ltd Address:301B,3rdfloor,buildinga,yidexingindustrialplant,Fukang community,Longhuastreet,LonghuaDistrict,Shenzhen ProductName:Starlights ModelNumber:HS-06 FCCIdentifier:2A2FH-HS-06 WeauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdelCarme,s/n, 08193Bellaterra,Spain,toactonourbehalfonallmattersconcerningthe abovenamedequipment. AnyindividualwithinLGAITechnologicalCenterS.A.isauthorizedtoactonour behalfandtakeactionontheapplication. WedeclarethatauthorizeLGAITechnologicalCenterS.A.,RondadelaFontdel Carme,s/n,08193Bellaterra,Spain,isallowedtoforwardallinformation relatedtotheapprovalprojecttotheFederalCommunicationCommissionand todiscussanyissuesconcerningtheapprovalapplication.Anyandallacts carriedoutbyLGAITechnologicalCenterS.A.onourbehalfshallhavethe sameeffectasactsofourown. Name:LuasasDate:2021-06-24 Title:N/A Signatureofapplicant:

C5266091_X10_Ed.1 1/1 <ShenzhenshiyonganbaoTechnologyCo.,Ltd> OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date:2021-06-24 Subject:RequestforConfidentiality FCCID:2A2FH-HS-06 ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-Term Confidentiality IDLabel/LocationNoNo AttestationStatementNoNo ExternalPhotosNo BlockDiagram Schematics TestReportNoNo TestSetupPhotosNo User’sManual InternalPhotos PartsList/TuneUp RFExposureInfo OperationalDescription CoverLetter(s)NoNo SDRSoftware/SecurityInfoNo Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. Sincerely, Signature: Name:Luasas Title:N/A

EUTPHOTO(ExternalPhotos)

Label and label location Star lights HS-06 FCC ID:2A2FH-HS-06

EUTPHOTO(InternalPhotos)

FCCID:2A2FH-HS-06 RFExposureEvaluation Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhumanexposure toradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequencyrange (MHz) Electricfield strength (V/m) Magneticfieldstrength (A/m) Powerdensity (mW/cm 2 ) Averagingtime (minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–301842/f4.89/f*(900/f 2 )6 30–30061.40.1631.06 300–1500f/3006 1500–100,00056 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30824/f2.19/f*(180/f 2 )30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f=frequencyinMHz Friistransmissionformula:Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=powerdensityinmW/cm 2 ,Pout=outputpowertoantennainmW; G=gainofantennainlinearscale,Pi=3.1416; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainoftheantennaandthetotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancerwheretheMPElimitisreached. TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,middleandhighest channelindividually. TestResultofRFExposureEvaluation 2.4GWIFImode Channel Outputpower toantenna (dBm) Outputpowerto antenna(mW) PowerDensityat R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11b9.2118.340.0016591.0PASS 802.11g8.4557.010.0013941.0PASS 802.11n(HT20)8.5227.120.0014161.0PASS 802.11n(HT40)7.9256.200.0012341.0PASS Remark:antennagain=0dBi

Project No.: ZKT-2105282158E Page 1 of 56 FCC TEST REPORT FCC ID:2A2FH-HS-06 Report Number. .................................. :ZKT-2105282158E Date of Test.......................................................:May. 31, 2021 to Jun. 22, 2021 Date of issue.........................................:Jun. 18, 2021 Total number of pages..........................56 Test Result............................................: PASS Testing Laboratory............................: Shenzhen ZKT Technology Co., Ltd. Address...............................................: 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name.............................: ShenzhenshiyonganbaoTechnology Co., Ltd Address...............................................: 301B, 3rd floor, building a, yidexing industrial plant, Fukang community, Longhua street, Longhua District, Shenzhen Manufacturer's name......................: ShenzhenshiyonganbaoTechnology Co., Ltd Address...............................................: 301B, 3rd floor, building a, yidexing industrial plant, Fukang community, Longhua street, Longhua District, Shenzhen Test specification: Standard................................................: FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2013 Test procedure ..................................... : / Non-standard test method................:N/A Test Report Form No........................: TRF-EL-110_V0 Test Report Form(s) Originator.....: ZKT Testing Master TRF ........................................ : Dated: 2020-01-06 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name.....................................:Star lights Trademark ........................................... : N/A Model/Type reference ......................... :HS-06 Ratings..................................................:Input: DC 5V Project No.: ZKT-2105282158E Page 2 of 56 Testing procedure and testing location: Testing Laboratory ....................................... :Shenzhen ZKT Technology Co., Ltd. Address ............................................................ :1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Alen He Tested by (name + signature).......................: Joe Liu Reviewer (name + signature).......................: Lake Xie Approved (name + signature).......................: Project No.: ZKT-2105282158E Page 3 of 56 Table of Contents Page 1. VERSION5 2. SUMMARY OF TEST RESULTS6 2.1 TEST FACILITY7 2.2 MEASUREMENT UNCERTAINTY7 3. GENERAL INFORMATION8 3.1 GENERAL DESCRIPTION OF EUT8 3.2 DESCRIPTION OF TEST MODES9 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED9 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE)10 3.5EQUIPMENTS LIST FOR ALL TEST ITEMS11 4. EMC EMISSION TEST12 4.1 CONDUCTED EMISSION MEASUREMENT12 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS12 4.1.2 TEST PROCEDURE12 4.1.3 DEVIATION FROM TEST STANDARD12 4.1.4 TEST SETUP13 4.1.5 EUT OPERATING CONDITIONS13 4.1.6 TEST RESULT14 4.2 RADIATED EMISSION MEASUREMENT16 4.2.1 RADIATED EMISSION LIMITS16 4.2.2 TEST PROCEDURE16 4.2.3 DEVIATION FROM TEST STANDARD17 4.2.4 TEST SETUP17 4.2.5 EUT OPERATING CONDITIONS18 4.2.6 TEST RESULTS18 5.RADIATED BAND EMISSIONMEASUREMENT29 5.1 TEST REQUIREMENT:29 5.2 TEST PROCEDURE29 5.3 DEVIATION FROM TEST STANDARD29 5.4 TEST SETUP30 5.5 EUT OPERATING CONDITIONS30 5.6 TEST RESULT31 6.POWER SPECTRAL DENSITY TEST33 6.1 APPLIED PROCEDURES / LIMIT33 6.2 TEST PROCEDURE33 6.3 DEVIATION FROM STANDARD33 6.4 TEST SETUP33 6.5 EUT OPERATION CONDITIONS33 Project No.: ZKT-2105282158E Page 4 of 56 6.6 TEST RESULT34 7. CHANNEL BANDWIDTH& 99% OCCUPY BANDWIDTH42 7.1 APPLIED PROCEDURES / LIMIT42 7.2 TEST PROCEDURE42 7.3 DEVIATION FROM STANDARD42 7.4 TEST SETUP42 7.5 EUT OPERATION CONDITIONS42 7.6 TEST RESULT43 8.PEAK OUTPUT POWER TEST46 8.1 APPLIED PROCEDURES/LIMIT46 8.2 TEST PROCEDURE46 8.3 DEVIATION FROM STANDARD46 8.4 TEST SETUP46 8.5 EUT OPERATION CONDITIONS46 8.6 TEST RESULT47 9. CONDUCTED BAND EDGE AND SPURIOUS EMISSION48 9.1 APPLICABLE STANDARD48 9.2 TEST PROCEDURE48 9.3 DEVIATION FROM STANDARD48 9.4 TEST SETUP48 9.5 EUT OPERATION CONDITIONS48 9.6 TEST RESULTS48 10. ANTENNA REQUIREMENT55 11. TEST SETUP PHOTO56 12. EUT CONSTRUCTIONAL DETAILS56 Project No.: ZKT-2105282158E Page 5 of 56 1. VERSION Report No.VersionDescriptionApproved ZKT-2105282158ERev.01Initial issue of reportJun. 18, 2021 Project No.: ZKT-2105282158E Page 6 of 56 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test ItemResultRemark FCC part 15.203/15.247 (c) Antenna requirementPASS FCC part 15.207AC Power Line Conducted EmissionPASS FCC part 15.247 (b)(3)Conducted Peak Output PowerPASS FCC part 15.247 (a)(2)Channel Bandwidth& 99% OCBPASS FCC part 15.247 (e)Power Spectral DensityPASS FCC part 15.247(d)Band EdgePASS FCC part 15.205/15.209Spurious EmissionPASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Project No.: ZKT-2105282158E Page 7 of 56 2.1 TEST FACILITY Shenzhen ZKT Technology Co., Ltd. Add. : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China FCC Test Firm Registration Number: 692225 Designation Number: CN1299 IC Registered No.: 27033 2.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2 ， providing a level of confidence of ap…

Text truncated - open the document above for the full version.

EUTTESTPHOTO