2A2H7-DC-20AIoT(Internet of Things) terminal

DC-20 USER’S GUIDE ©All Rights Reserved DC-20 User’s Guide Rev.: 1.0 +Update: 29/07/21 Rev. 1.0 Page 2 of 15 This page contains confidential information, which is protected by copyright and is proprietary to DIV No part of this document may be used, copied, disclosed or conveyed to another party without prior written consent of DIV Revision History Revision Issue Date Author Scope Draft 2021/04/30 Lim.J.H Initial Release DC-20 User’s Guide Rev.: 1.0 +Update: 29/07/21 Rev. 1.0 Page 3 of 15 This page contains confidential information, which is protected by copyright and is proprietary to DIV No part of this document may be used, copied, disclosed or conveyed to another party without prior written consent of DIV Contents 1 WARNINGS FOR SAFETY OPERATION ................................................................ 5 2 INTRODUCTION ...................................................................................................... 7 3 OVERVIEW .............................................................................................................. 8 3.1 Components .................................................................................................................................................. 8 3.3 Features .......................................................................................................................................................... 9 4 HARDWARE DESCRIPTIONS ............................................................................... 10 4.1 DC-20 ........................................................................................................................................................... 10 4.1.1 I/O Connector .................................................................................................................................... 10 4.1.2 2mm 6pin connector .............................................................................................................................. 10 4.1.3 2mm 4pin connector .............................................................................................................................. 11 4.1.4 2mm 2pin connector .............................................................................................................................. 11 4.1.5 Status LED .......................................................................................................................................... 12 5 SPECIFICATIONS .................................................................................................. 13 5.1 DC-20 ........................................................................................................................................................... 13 6 LIMITED WARRANTY ........................................................................................... 14 DC-20 User’s Guide Rev.: 1.0 +Update: 29/07/21 Rev. 1.0 Page 4 of 15 This page contains confidential information, which is protected by copyright and is proprietary to DIV No part of this document may be used, copied, disclosed or conveyed to another party without prior written consent of DIV Figure FIGURE １ DC-20 SYSTEM .................................................................................................................................. 7 FIGURE ２ DC-20 TERMINAL ............................................................................................................................. 8 FIGURE ３ DC-20 TERMINAL ........................................................................................................................... 10 Table TABLE 1 DESCRIPTIONS FOR EACH PARTS OF DC-20 ............................................................................... 10 TABLE 3 STATUS LED....................................................................................................................................... 12 TABLE 4 DC-20 SPECIFICATIONS .................................................................................................................... 13 DC-20 User’s Guide Rev.: 1.0 +Update: 29/07/21 Rev. 1.0 Page 5 of 15 This page contains confidential information, which is protected by copyright and is proprietary to DIV No part of this document may be used, copied, disclosed or conveyed to another party without prior written consent of DIV 1 Warnings for safety operation This is to protect your safety and property. Please read this manual carefully before using. ◼ Operational Environment - The operating voltage of this products is between 9Vdc and 34Vdc. Please use the specified operating volgage. - Use within the specified temperature range. - This product is specialized for industrial vehicles. ◼ Insallation Precaustions - Insallation and wiring require professional skills. Be sure to install it with the help of a propessional. Incorrect insallation and wiring can cuase the fire or malfuncation. - When installing the product, install it so that it does not inferfere with the operation of safety devices such as airbags and brake levers...etc. - Insall in a location free from moisture. It may cuase damage or accidents if it is installed in places where water or rain is splashed or dusty. - When wiring, be sure to check the position of pipes, tanks, electric wiring, etc., and pay special attention to avoid interference or contact. - Use specified cables and components. - Be careful not to fall down when installing in a place where the ceiling and vibration of the vehicle are severe. - Do not block the vent or heat sink. It may cause the fire. - Protect the wire tube by winding the insulation tape around the area where the wire is in contact with the metal part. It can cause the fire or electric shock. ◼ Important Safety Precautions - Do not operate the device by manually during the vehicle operation. It can cuase the accidents. - Any modification of this product is prohibited and will void your warranty. Any use of the product or its components for purp…

Text truncated - open the document above for the full version.

DASH COMPANY Inc. 109, Teheran-ro, Gangnam-gu, Seoul, Republic of Korea Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2A2H7-DC-20A To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics / Block Diagram / Operational Description / Parts List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. 2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days External Photos / Internal Photos / Test Setup Photos / User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and such information will be available for public review once the grant of equipment authorization is issued. Sincerely Yours, Ho Yang / Manager DASH COMPANY Inc.

DASH COMPANY Inc. 109, Teheran-ro, Gangnam-gu, Seoul, Republic of Korea Date: Dec. 07, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Timco Engineering, Inc. Certification Division 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA FCC ID : 2A2H7-DC-20A To whom it may concern: I, the undersigned, hereby authorize Technical Manager Issac Jin of MOVON CORPORATION and here after referred to as MOVON CORPORATION, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these m atters. Any and all acts carried out by Technical Manager Issac Jin of MOVON CORPORATION on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing MOVON CORPORATION as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; DASH COMPANY Inc. 109, Teheran-ro, Gangnam-gu, Seoul, Republic of Korea e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Ho Yang / Manager DASH COMPANY Inc. REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

Copyright ⓒ Movon Corporation. All rights Reserved. External Photos Copyright ⓒ Movon Corporation. All rights Reserved. External Photos Front Rear Copyright ⓒ Movon Corporation. All rights Reserved. External Photos Left Right Copyright ⓒ Movon Corporation. All rights Reserved. External Photos Top Bottom Copyright ⓒ Movon Corporation. All rights Reserved. USIM Port

Copyright ⓒ Movon Corporation. All rights Reserved. Label Informaion Label 35mmx30mm MODEL: DC-20A S/N: 220001Manuf : DASH COMPANY Inc FCC ID: 2A2H7-DC-20AInput: DC 36V 1A Made in Korea

Copyright ⓒ Movon Corporation. All rights Reserved. Internal Photos Copyright ⓒ Movon Corporation. All rights Reserved. Internal Photos Main PCB Front Main PCB Rear Copyright ⓒ Movon Corporation. All rights Reserved. Internal Photos Inside LTE Antenna Copyright ⓒ Movon Corporation. All rights Reserved. BLE Antenna WIFI Antenna

1. Regulation 2. RF Exposure Compliance Issue f=frequency in MHz, *= plane-wave equivalent power density MPE (Maximum Permissive Exposure) Prediction Predication of MPE limit at a given distance: Equation from page 18 of OET Bulletin 65, Edition 97-01 S = power density [mW/cm 2 ] P = Power input to antenna [mW] G = Power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna [cm] The information should be included in the user’s manual: This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20 cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements. 300 ~ 1 500//f/1 50030 1 500 ~ 15 000//130 1.34 ~ 30824/f2.19/f*(180/f2)30 30 ~ 30027.50.0730.230 According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this Chapter. RF EXPOSURE Limits for Maximum Permissive Exposure: RF exposure is calculated. Limits for General Population / Uncontrolled Exposure 0.3 ~ 1.346141.63*(100)30 Frequency Range Electric Field Strength [V/m] Magnetic Field Strength [A/m] Power Density [mW/cm 2 ] Averaging Time [minute]  SPGRRPGS4 4 2  Copyright ⓒ Movon Corporation. All rights Reserved. ( 0. 080mW/cm2 [ Wifi Result(mW/cm2) / Limit(mW/cm2) ]+[ LTE Result(mW/cm2) / Limit(mW/cm2) ]+[ BLE Result(mW/cm2) / Limit(mW/cm2) ] * 100 ]1/ 0.080 490 [ +LTE= = 22.249 % 100 RF Exposure Compliance Issue Therefore, EUT is not required the SAR Evaluation. [ 0.110 000 /1] *Distance to the center of the radiation of the antenna20 cm ) Limit : ≤ 100 % Wifi = 0. 032 mW/cm2 =[ 0.032 000 / 1 ] +BLE=0. 110mW/cm2 MPE Calculations : Wifi + BLE + LTE The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the The MPE calculation for this exposure is shown below. Simultaneous MPE Wifi+BLE+LTE - Total (%) =- NOTE Wifi+BT+LTE Copyright ⓒ Movon Corporation. All rights Reserved.

verify No.462941552668 KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR21-SRF0185 Page (2) of (19) KCTL-TIR001-003/5 KP21-03385 REPORT REVISION HISTORY Date Revision Page No 2021-07-28 Originally issued - This report shall not be reproduced except in full, without the written approval of KCTL Inc. This document may be altered or revised by KCTL Inc. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by KCTL Inc. will constitute fraud and shall nullify the document. This test report is a general report that does not use the KOLAS accreditation mark and is not related to KS Q ISO/IEC 17025 and KOLAS accreditation. General remarks for test reports Statement concerning the uncertainty of the measurement systems used for the tests (may be required by the product standard or client) Internal procedure used for type testing through which traceability of the measuring uncertainty has been established: Procedure number, issue date and title: Calculations leading to the reported values are on file with the testing laboratory that conducted the testing. Statement not required by the standard or client used for type testing KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR21-SRF0185 Page (3) of (19) KCTL-TIR001-003/5 KP21-03385 CONTENTS 1. General information ...................................................................................................... 4 2. Device information ........................................................................................................ 4 2.1. Frequency/channel operations ................................................................................ 5 3. Summary of tests ......................................................................................................... 6 4. Measurement uncertainty ............................................................................................. 7 5. Test results ................................................................................................................... 8 5.1. Radiated Power (ERP/EIRP) .................................................................................. 8 5.2. Radiated Spurious Emissions ............................................................................... 13 6. Measurement equipment ............................................................................................ 19 KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR21-SRF0185 Page (4) of (19) KCTL-TIR001-003/5 KP21-03385 1. General information Client : DASH COMPANY Inc. Address : 109, Teheran-ro, Gangnam-gu, Seoul, Republic of Korea Manufacturer : DASH COMPANY Inc. Address : 109, Teheran-ro, Gangnam-gu, Seoul, Republic of Korea Laboratory : KCTL Inc. Address : 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea Accreditations : FCC Site Designation No: KR0040, FCC Site Registration No: 687132 VCCI Registration No. : R-20080, G-20078, C-20059, T-20056 CAB Identifier: KR0040, ISED Number: 8035A KOLAS No.: KT231 2. Device information Equipment under test : IoT(Internet of Things) terminal Model : DC-20A Frequency range : 2 402 ㎒ ~ 2 480 ㎒ (Bluetooth Low Energy) 2 412 ㎒ ~ 2 472 ㎒ (WIFI 802.11b/g/n(HT20)) 2 422 ㎒ ~ 2 462 ㎒ (WIFI 802.11n(HT40)) 1 559 ㎒ ~ 1 610 ㎒ (GNSS) 1 710 ㎒ ~ 1 755 ㎒ (LTE Band 4) 1 850 ㎒ ~ 1 910 ㎒ (LTE Band 2) Modulation technique : GFSK (Bluetooth Low Energy) DSSS, OFDM (WIFI 802.11b/g/n(HT20/40)) QPSK, 16-QAM (LTE) Number of channels : 40 ch (Bluetooth Low Energy) 13 ch (WIFI 802.11b/g/n(HT20)) 9 ch (WIFI 802.11n(HT40)) Power source : DC 36 V, DC 3.6 V(Built-in battery) Antenna specification : Pattern Antenna (LTE) Antenna gain : 0.39 ㏈i (LTE Band 4) 1.07 ㏈i (LTE Band 2) Software version : VER1.02 Hardware version : VER1.0 Operation temperature : -20°C ~ 60°C KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR21-SRF0185 Page (5) of (19) KCTL-TIR001-003/5 KP21-03385 2.1. Frequency/channel operations This device contains the following capabilities: LTE Band 4, LTE Band 2 LTE Band 4 Ch. Frequency (㎒) 19957 1 710.7 20175 1 732.5 20393 1 754.3 Ch. Frequency (㎒) 19965 1 711.5 20175 1 732.5 20385 1 753.5 Ch. Frequency (㎒) 19975 1 712.5 20175 1 732.5 20375 1 752.5 Ch. Frequency (㎒) 20000 1 715.0 20175 1 732.5 20350 1 750.0 Table 2.1.1. 1.4M BW Table 2.1.2. 3M BW Table 2.1.3. 5M BW Table 2.1.4. 10M BW Ch. Frequency (㎒) 20025 1 717.5 20175 1 732.5 20325 1 747.5 Ch. Frequency (㎒) 20050 1 720.0 20175 1 732.5 20300 1 745.0 Table 2.1.5. 15M BW Table 2.1.6. 20M BW LTE Band 2 Ch. Frequency (㎒) 18607 1 850.7 18900 1 880.0 19193 1 909.3 Ch. Frequency (㎒) 18615 1 851.5 18900 1 880.0 19185 1 908.5 Ch. Frequency (㎒) 18625 1 852.5 18900 1 880.0 19175 1 907.5 Ch. Frequency (㎒) 18650 1 855.0 18900 1 880.0 19150 1 905.0 Table 2.1.7. 1.4M BW Table 2.1.8. 3M BW Table 2.1.9. 5M BW Table 2.1.10. 10M BW Ch. Frequency (㎒) 18675 1 857.5 18900 1 880.0 19125 1 902.5 Ch. Frequency (㎒) 18700 1 860.0 18900 1 880.0 19100 1 900.0 Table 2.1.11. 15M BW Table 2.1.12. 20M BW KCTL Inc. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR21-SRF0185 Page (6) of (19) KCTL-TIR001-003/5 KP21-03385 3. Summary of tests FCC Part section(s) Parameter Test Limit Test Condition Test results 27.50(b)(10) 27.50(c)(10) Effective Radiated Power < 3 Watts max. ERP Radiated Pass 24.232(c) 27.50(h)(2) Equivalent Isotropic Radiated Power < 2 Watts max. EIRP Radiated Pass 2.1053 24.238(a) 27.53(c),(f), (g),(h), (m) Radiated Spurious Emissions <43 + 10Log 10 (P) ㏈ <55 + 10Log 10 (P) ㏈ <-70 ㏈W/㎒ E…

Text truncated - open the document above for the full version.

Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, All Test Data Presented in this report is only applicable to presented Test sample. Shenzhen STS Test Services Co., Ltd. 1/F., Building B, Zhuoke Science Park, No.190, Chongqing Road, Fuyong Street, Bao’an District, Shenzhen, Guangdong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:[email protected] RADIO TESTREPORT Report No:STS1906023W02 Issued for WIZnet H.K. LTD. Unit 511, 5F Enterprise Place, No. 5 Science Park West Avenue, Hong Kong Science Park, Shatin N.T. Hong Kong China Product Name: WizFi360 Brand Name: WIZnet Model Name: WizFi360-PA Series Model: WizFi360-CON FCC ID: 2ATUB-WIZFI360PA Test Standard: FCC Part 15.247 S T L A B S Page 2 of 95 Report No.:STS1906023W02 TEST RESULT CERTIFICATION Applicant’s Name ................. : WIZnet H.K. LTD. Address .................................. : Unit 511, 5F Enterprise Place, No. 5 Science Park West Avenue, Hong Kong Science Park, Shatin N.T. Hong Kong China Manufacture's Name ............ : WIZnet H.K. LTD. Address .................................. : Unit 511, 5F Enterprise Place, No. 5 Science Park West Avenue, Hong Kong Science Park, Shatin N.T. Hong Kong China Product Description Product Name ........................ : WizFi360 Brand Name ........................... : WIZnet Model Name ........................... : WizFi360-PA SeriesModel ........................... : WizFi360-CON Test Standards ..................... : FCC Part15.247 Test Procedure........................: ANSI C63.10-2013 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of STS, this document only be altered or revised by STS, personal only, and shall be noted in the revision of the document. Date of Test ............................................ : Date (s) of performance of tests ............. : 10 June 2019 ~ 02 Aug. 2019 Date of Issue .......................................... : 02 Aug. 2019 Test Result .............................................. : Pass Testing Engineer : (Chris Chen) Technical Manager : (Sunday Hu) Authorized Signatory : (Vita Li) Page 3 of 95 Report No.:STS1906023W02 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 2.4 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 11 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 12 3. EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.2 RADIATED EMISSION MEASUREMENT 15 4.CONDUCTED SPURIOUS & BAND EDGE EMISSION 32 4.1 LIMIT 32 4.2 TEST PROCEDURE 32 4.3DEVIATION FROM STANDARD 32 4.4 TEST SETUP 32 4.5 EUT OPERATION CONDITIONS 32 4.6 TEST RESULTS 33 5. POWER SPECTRAL DENSITY TEST 57 5.1 LIMIT 57 5.2 TEST PROCEDURE 57 5.3 DEVIATION FROM STANDARD 57 5.4 TEST SETUP 57 5.5 EUT OPERATION CONDITIONS 57 5.6 TEST RESULTS 58 6. BANDWIDTH TEST 74 6.1 LIMIT 74 6.2 TEST PROCEDURE 74 6.3 DEVIATION FROM STANDARD 74 6.4 TEST SETUP 74 6.5 EUT OPERATION CONDITIONS 74 6.6 TEST RESULTS 75 Page 4 of 95 Report No.:STS1906023W02 Table of Contents Page 7. PEAK OUTPUT POWER TEST 91 7.1 LIMIT 91 7.2 TEST PROCEDURE 91 7.3 DEVIATION FROM STANDARD 91 7.4 TEST SETUP 91 7.5 EUT OPERATION CONDITIONS 91 7.6 TEST RESULTS 92 8. ANTENNA REQUIREMENT 94 8.1 STANDARD REQUIREMENT 94 8.2 EUT ANTENNA 94 APPENDIX-PHOTOS OF TEST SETUP 95 Page 5 of 95 Report No.:STS1906023W02 Revision History Rev. Issue Date Report No. Effect Page Contents 00 02 Aug. 2019 STS1906023W02 ALL Initial Issue Page 6 of 95 Report No.:STS1906023W02 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02 FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission N/A -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.247 (c) Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted Band Edge Emission PASS -- Part 15.247(d)/part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1)” N/A” denotes test is not applicable in this Test Report (2)all tests are according to ANSI C63.10-2013 . Page 7 of 95 Report No.:STS1906023W02 1.1 TEST FACTORY Shenzhen STS Test Services Co., Ltd. Add. : 1/F., Building B, Zhuoke Science Park, No.190,Chongqing Road, Fuyong Street, Bao’an District, Shenzhen, Guangdong, China FCC test Firm Registration Number: 625569 A2LA Certificate No.: 4338.01; 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.71dB 2 Unwanted Emissions, conducted ±0.63dB 3 All emissions, radiated 30-200MHz ±3.43dB 4 All emissions, radiated 200MHz-1GHz ±3.57dB 5 All emissions, radiated>1G ±4.13dB 6 Conducted Emission (9KHz-150KHz) ±3.18dB 7 Conducted Emission (150KHz-30MHz) ±2.70dB Page 8 of 95 Report No.:STS1906023W02 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name WizFi360 Trade Name WIZnet Model Name WizFi360-PA Series Model WizFi360-CON Model Difference 1.WizFi360-PA has a PCB antenna onboard, WizFi360-CON doesn’t have; 2.WizFi360-CON has an IPEX antenna connector onboard, WizFi360-PA doesn’t have; 3.WizFi360-PA has a LED light onboard, WizFi360-CON doesn’t have Product Description The EUT is a WizFi360 Operation Frequency: 802.11b/g/n 20: 2412~2462 MHz 802.1…

Text truncated - open the document above for the full version.

RF TEST REPORT Applicant Quectel Wireless Solutions Co., Ltd FCC ID XMR201606EC21A Product LTE Module Brand Quectel Model EC21-A, EC21-A MINIPCIE Report No. R1805A0226-R3V3 Issue Date June 12, 2018 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 2 (2017)/ FCC CFR47 Part 27C (2017). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Jiangpeng Lan Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86‐021‐50791141/2/3 FAX: +86‐021‐50791141/2/3‐8000 FCC RF Test Report Report No: R1805A0226-R3V3 TA Technology (Shanghai) Co., Ltd. TA-MB-05-003R Page 2 of 51 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ............................................................................................................................... 4 1.1 Notes of the Test Report ......................................................................................................... 4 1.2 Test facility .............................................................................................................................. 4 1.3 Testing Location ...................................................................................................................... 5 2 General Description of Equipment under Test ................................................................................ 6 3 Applied Standards .......................................................................................................................... 8 4 Test Configuration .......................................................................................................................... 9 5 Test Case Results ........................................................................................................................ 10 5.1 RF Power Output .................................................................................................................. 10 5.2 Effective Isotropic Radiated Power ....................................................................................... 15 5.3 Occupied Bandwidth ............................................................................................................. 20 5.4 Band Edge Compliance ........................................................................................................ 22 5.5 Peak-to-Average Power Ratio (PAPR) .................................................................................. 24 5.6 Frequency Stability ................................................................................................................ 26 5.7 Spurious Emissions at Antenna Terminals ............................................................................ 28 5.8 Radiates Spurious Emission ................................................................................................. 32 6 Main Test Instruments ......................................................................................................... ......... 46 ANNEX A: EUT Appearance and Test Setup ...................................................................................... 47 A.1 EUT Appearance ................................................................................................................... 47 A.2 Test Setup ............................................................................................................................. 49 ANNEX B: Product Change Description .................................…

Text truncated - open the document above for the full version.