
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
SNOOZE dimmer/sleep 1 2 345 6 7 8 991011 12 SNOOZE dimmer/sleep SNOOZE dimmer/sleep SNOOZE dimmer/sleep SNOOZE dimmer/sleep SNOOZE dimmer/sleep SNOOZE dimmer/sleep SNOOZE dimmer/sleep SNOOZE dimmer/sleep FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with th e instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfere nce by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dea ler or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Shen zhen shi zhi mao ke ji you xian gong si Agent Authorization Company: Shen zhen shi zhi mao ke ji you xian gong si Address: Room No. 501, Block 8, Jishengchang Industrial Zone, No. 9, Jingnan Road, Mumianwan Community, Buji Street, Longgang District, Shenzhen, China Product Name: Dual Alarm Clock with Wireless Charging Trade Mark: KIMIUP Model Number(s): KIMIUP 101, FS018A FCC ID: 2A2MV-KIMIUP101 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2021-07-21 Name: Tang Xiaobo Title: General Manager Company: Shen zhen shi zhi mao ke ji you xian gong si
Shen zhen shi zhi mao ke ji you xian gong si Address: Room No. 501, Block 8, Jishengchang Industrial Zone, No. 9, Jingnan Road, Mumianwan Community, Buji Street, Longgang District, Shenzhen, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Dear Sir/Madam, We, Shen zhen shi zhi mao ke ji you xian gong si Hereby declares the following statement for MiCOM Labs Inc, PCB board, structure and internal of these model(s) are the same, Only models name is different for these models: Product Name: Dual Alarm Clock with Wireless Charging Trade Mark: KIMIUP Model Number(s): KIMIUP 101, FS018A FCC ID: 2A2MV-KIMIUP101 Signature: Date: 2021-07-21 Name: Tang Xiaobo Title: General Manager Company: Shen zhen shi zhi mao ke ji you xian gong si
Shen zhen shi zhi mao ke ji you xian gong si Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021-0 7-21 Subject; Request for Confidentiality FCC ID: 2A2MV-KIMIUP101 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name:Tang Xiaobo Title: General Manager
Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 1. EXTERIOR PHOTOGRAPHS Fig.1 Fig.2 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 Fig.3 Fig.4 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 Fig.5 Fig.6 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 Fig.7 Fig.8 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 Fig.9
Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 Label and Location Size: L5.0cm*W3.0cm Material: Tagboard Glue: adhesive sticker Font color: Black Label color: Black Label Location Dual Alarm Clock with Wireless Charging Model No.: KIMIUP 101 FCC ID: 2A2MV-KIMIUP101
Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 1. INTERIOR PHOTOGRAPHS Fig.1 Fig.2 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 Fig.3 Fig.4 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 Fig.5 Fig.6 CoilAntenna Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 Fig.7 Fig.8 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 Fig.9 Fig.10 BT Antenna Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 Fig.11 Fig.12
Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 4 FCC RF Exposure Evaluation 1. Product Information FCC ID 2A2MV‐KIMIUP101 Product name Dual Alarm Clock with Wireless Charging Test Model KIMIUP 101 Additional Model No. FS018A Model Declaration PCB board, structure and internal of these model(s) are the same, So no additional models were tested Power supply Input: 5V 3.5A, 17.5W by external power adaptor Wireless Charging: 10W USB output: 5V 2A Modulation Type GFSK, π/4‐DQPSK for Bluetooth V5.0(BDR/EDR) GFSK for Bluetooth V5.0(BT LE) Antenna Type PCB Antenna Antenna Gain ‐0.58dBi(Max.) Hardware version 5.0 Software version 5.0 FCC Operation frequency 2402MHz ~ 2480MHz Exposure category General population/uncontrolled environment EUT Type Production Unit Device Type Mobile Devices 2. Evaluation Method Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. In accordance with KDB447498D01 for Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modelled or measured field strengths or power density, is ≤ 1.0. The MPE ratio of each antenna is determined at the minimum test separation distance required by the operating configurations and exposure conditions of the host device, according to the ratio of field strengths or power density to MPE limit, at the test frequency. Either the maximum peak or spatially averaged results from measurements or numerical simulations may be used to determine the MPE ratios. Spatial averaging does not apply when MPE is estimated using simple calculations based on far‐ field plane‐wave equivalent conditions. The antenna installation and operating requirements for the host device must meet the minimum test separation distances required by all antennas, in both standalone and simultaneous transmission operations, to satisfy compliance. Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 4 3. Limit 3. 1 Refer Evaluation Method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General 1 RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices 3. 2 Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane‐wave equivalent power density 4. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97‐01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 5. Antenna Information Artemis Antenna can only use antennas certificated as follows provided by manufacturer; Internal Identification Antenna type and antenna number Operate frequency band Maximum antenna gain Note Antenna PCBAntenna 2402MHz ~ 2480MHz‐0.58dBi BTAntenna Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 4 6. Conducted Power < BT Max Conducted Power > Mode Channel Frequency(MHz) Max Conducted Power (dBm) GFSK 0 24024.103 39 24415.431 78 24803.836 π/4DQPSK 0 24023.320 39 24414.634 78 24803.082 8DPSK 0 24023.439 39 24414.816 78 24803.290 < BT LE Max Conducted Power > Mode Channel Frequency(MHz) Max Conducted Power (dBm) GFSK 0 24024.114 19 24405.452 39 24803.927 7. Manufacturing Tolerance <BT> GFSK (Peak) Channel Channel 0Channel 39Channel 78 Target (dBm) 4.05.03.0 Tolerance ±(dB)1.01.01.0 π/4DQPSK (Peak) Channel Channel 0Channel 39Channel 78 Target (dBm) 3.04.03.0 Tolerance ±(dB)1.01.01.0 8DPSK(Peak) Channel Channel 0Channel 39Channel 78 Target (dBm) 3.04.03.0 Tolerance ±(dB)1.01.01.0 <BT LE> GFSK (Peak) Channel Channel 0Channel 19Channel 39 Target (dBm) 4.05.03.0 Tolerance ±(dB)1.01.01.0 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 4 8. Measurement Results 8.1 Standalone MPE As declared by the Applicant, the EUT is a wireless device used in a fix application,…
Text truncated - open the document above for the full version.
Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 Report No.: LCS210615107AEB This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 34 FCC TEST REPORT For Shen zhen shi zhi mao ke ji you xian gong si Dual Alarm Clock with Wireless Charging Test Model: KIMIUP 101 Additional Model No.: Please Refer to Page 6 Prepared for : Shen zhen shi zhi mao ke ji you xian gong si Address : Room No. 501, Block 8, Jishengchang Industrial Zone, No. 9, Jingnan Road, Mumianwan Community, Buji Street, Longgang District, Shenzhen, China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : June 17, 2021 Number of tested samples : 2 Serial number : 210615107A-1(Engineer sample), 210615107A-2(Normal sample) Date of Test : June 17, 2021 ~ June 29, 2021 Date of Report : July 02, 2021 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 Report No.: LCS210615107AEB This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 34 FCC TEST REPORT FCC CFR 47 PART 15 C (15.247) Report Reference No. ................. : LCS210615107AEB Date of Issue .................................. : July 02, 2021 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address .......................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure .......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : Shen zhen shi zhi mao ke ji you xian gong si Address .......................................... : Room No. 501, Block 8, Jishengchang Industrial Zone, No. 9, Jingnan Road, Mumianwan Community, Buji Street, Longgang District, Shenzhen, China Test Specification Standard ........................................ : FCC CFR 47 PART 15 C (15.247) Test Report Form No. .................. : LCSEMC-1.0 TRF Originator ............................... : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF .................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. EUT Description. .......................... : Dual Alarm Clock with Wireless Charging Trade Mark ..................................... : KIMIUP Test Model ..................................... : KIMIUP 101 Ratings ........................................... : Input: 5V 3.5A, 17.5W by external power adaptor Wireless Charging: 10W USB output: 5V 2A Result .......................................... : Positive Compiled by: Supervised by: Approved by: Ray Yang/ Administrators Jin Wang/ Technique principal Gavin Liang/ Manager Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 Report No.: LCS210615107AEB This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 34 FCC -- TEST REPORT Test Model........................... : KIMIUP 101 EUT......................................... : Dual Alarm Clock with Wireless Charging Applicant............................... : Shen zhen shi zhi mao ke ji you xian gong si Address.................................. : Room No. 501, Block 8, Jishengchang Industrial Zone, No. 9, Jingnan Road, Mumianwan Community, Buji Street, Longgang District, Shenzhen, China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Shen zhen shi zhi mao ke ji you xian gong si Address................................... : Room No. 501, Block 8, Jishengchang Industrial Zone, No. 9, Jingnan Road, Mumianwan Community, Buji Street, Longgang District, Shenzhen, China Telephone............................... : / Fax.......................................... : / Factory................................... : Shen zhen shi zhi mao ke ji you xian gong si Address................................... : Room No. 501, Block 8, Jishengchang Industrial Zone, No. 9, Jingnan Road, Mumianwan Community, Buji Street, Longgang District, Shenzhen, China Telephone............................... : / Fax.......................................... : / Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS210615107AEB July 02, 2021 Date of issue Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 Report No.: LCS210615107AEB This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 34 Revision History Revision Issue Date Revisions Revised By 000 July 02, 2021 Initial Issue Gavin Liang Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 Report No.: LCS210615107AEB This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 34 TABLE OF CONTENTS 1. GENE…
Text truncated - open the document above for the full version.
Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 _______________________________________________________________________________________________ 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement Fig. 2 Fig. 3 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A2MV-KIMIUP101 _______________________________________________________________________________________________ 1.2. Photo of Conducted Emissions Measurement Fig. 4
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 3.50 mW |