2A2ND-P791INIU SnapGo Power Bank

Kontaktieren Sie uns | Contattaci | Contáctenos | Contactez-nous | お 問い合わせ | Contact | Kontakta oss | Kontakt | Bize Ulaşın | بنا اتصل Contact Us +44 1604 343123 Hours: Mon-Fri, 9 AM - 6 PM (GMT) +1 (606) 220-6170 Language: EN/ES Hours: Mon-Fri, 9 AM - 6 PM (U.S. EST) +1 (289) 814-3336 +33 159 134528 Language: FR/EN Hours: Mon-Fri, 9 AM - 6 PM (CET) iniushop.com iniu_official +49 800 0007100 Languages: DE/EN Hours: Mon-Fri, 9 AM-6 PM (CET) +39 800 779316 Languages: IT/EN Hours: Mon-Fri, 10 AM-7 PM (CET) +34 900 989 433 Languages: ES/EN Hours: Mon-Fri, 9 AM-6 PM (CET) @iniuofficial WPTFrequency Range: 115-205 KHz, 360KHz Stated maximum RF output. This product is equipped with an intelligent thermal management system. When the output power or temperature exceeds the predefined safety threshold, the device will automatically reduce its output power.This protective mechanism is in compliance with the IEC 62368-1 international safety standard. AR DE Verwenden Sie einen geeigneten USB-C-Anschluss, um kabelgebunden zu laden oder wieder aufzuladen. IT Usa una porta USB-C adatta per caricare o ricaricare via cavo. ES Utiliza un puerto USB-C adecuado para cargar o recargar con cable. FR Utilisez un port USB-C approprié pour charger ou recharger avec un câble. JA 適切なUSB-Cポートを使用して、有線で充電または再充電してください。 NL Gebruik een geschikte USB-C-poort om bedraad op te laden of opnieuw op te laden. SV Använd en lämplig USB-C-port för att ladda eller återuppladda med kabel. PL Użyj odpowiedniego portu USB-C, aby przewodowo ładować lub doładować. TR Kablolu şarj ve yeniden şarj için uygun bir USB portu kullanın. استخدم منفذ - ا للشحن أو إعادة الشحن باستخدام الكابل ً مناسب. EN Use a suitable USB-C port to wired charge or recharge IN1/OUT1 (30W)(65W) IN2/OUT2 (30W)(65W) IN1/N2: 5V3A 9V3A 12V2.5A 30W(MAX) 7oz / 197g 4.1*2.8*0.5in / 10.5*7.1*1.37cm 3350mAh(11.64V)/38.99Wh P791Model Battery Capacity Size Weight Input Battery Type Lithium Battery Spezifikationen | Specifiche | Especificaciones | Spécifications | 仕様 | Specificaties | Specifikationer | Specyfikacje | Teknik Özellikler | Specifications Cell Capacity3350mAh × 3(10050mAh) Rated Capacity المواصفات Output Magnetic charging only for iPhone 12 series and laterCompatibility Fast Charging Protocol ≤0.16in / 4mm (Magnetic Phone Case Only)Sensing Distance Wireless OUT: (Qi2)5W/7.5W/10W/15W/25W OUT1/OUT2: 5V3A 9V3A 12V3A 15V3A 20V 3.25A 65W(MAX) OUT1+OUT2: 11.25W+11.25W=22.5W(MAX) OUT1/OUT2+Wireless OUT: 17.5W+5W=22.5W(MAX) Total (OUT1+OUT2+Wireless OUT): 8.75W+8.75W+5W=22.5W(MAX) Power allocation for each port is determined following a protocol handshake with the connected external device. Limited Power Source 6300mAh(5V) PD3.0, PD2.0, QC3.0, QC2.0, PPS, AFC, etc. x 1 To wirelessly charge your AirPods, place them and press the power button to activate. EN Um Ihre AirPods drahtlos aufzuladen, legen Sie sie ab und drücken Sie den Ein-/Ausschalter zur Aktivierung. Per caricare wireless gli AirPods, posizionali e premi il tasto di accensione per attivare. Para cargar de forma inalámbrica los AirPods, colócalos y pulsa el botón de encendido para activar. AirPodsをワイヤレスで充電するには、イヤホンを置いてから電源キーを押してアクティベートしてく ださい。 Om uw AirPods draadloos op te laden, plaatst u ze en drukt u op de aan/uit-knop om te activeren. För att ladda dina AirPods trådlöst, lägg på dem och tryck sedan på på/av-knappen för att aktivera. Aby bezprzewodowo naładować AirPods, połóż je i naciśnij przycisk włączania, aby aktywować. AirPods'ınızı kablosuz şarj etmek için, yerleştirin ve etkinleştirmek için açma/kapama düğmesine basın. لشحن ا، ضع السماعات ثم اضغط على زر التشغيل لتفعيل الشحن ً لاسلكي DE IT ES FR JA NL SV PL TR AR Pour charger sans fil vos AirPods, déposez-les et appuyez sur le bouton d'alimentation pour activer. 3 YEARS WARRANTY LIFETIME TECHNICAL SUPPORT تاونس 3 ةدمل نامض الدعم الفني مدى الحياة Declaration of Conformity Hereby, Shenzhen Topstar Industry Co., Ltd. declares that this product is in compliance with Directive 2014/30/EU & 2014/35/EU & EN 62133-2�2017 & 2015/863/EU & 2011/65/EU & 2023/1542/EU & 2014/53/EU & 2012/19/EU & REACH(EC) No 1907/2006 Declaración de conformidad Por la presente, Shenzhen Topstar Industry Co., Ltd. declara que este producto cumple con las Directivas 2014/30/UE y 2014/35/UE y EN 62133-2�2017 y 2015/863/UE y 2011/65/UE y 2023/1542/UE y 2014/53/UE y 2012/19/UE y REACH(CE) nº 1907/2006 Déclaration de conformité Par la présente, Shenzhen Topstar Industry Co., Ltd. déclare que ce produit est conforme aux directives 2014/30/UE et 2014/35/UE et EN 62133-2�2017 et 2015/863/UE et 2011/65/UE et 2023/1542/UE et 2014/53/UE et 2012/19/UE et REACH(CE) n° 1907/2006 Deklaracja zgodności Niniejszym firma Shenzhen Topstar Industry Co., Ltd. oświadcza, że ten produkt jest zgodny z dyrektywami 2014/30/UE i 2014/35/UE oraz EN 62133-2�2017 i 2015/863/UE i 2011/65/UE i 2023/1542/UE i 2014/53/UE oraz 2012/19/UE i REACH(WE) nr 1907/2006 Försäkran om överensstämmelse Härmed förklarar Shenzhen Topstar Industry Co., Ltd. att denna produkt överensstämmer med direktiv 2014/30/EU & 2014/35/EU & EN 62133-2�2017 & 2015/863/EU & 2011/65/EU & 2023/1542/EU & 3204/5 & 3204/EU 2012/19/EU & REACH(EC) nr 1907/2006 Konformitätserklärung Hiermit erklärt Shenzhen Topstar Industry Co., Ltd., dass dieses Produkt den Richtlinien 2014/30/EU & 2014/35/EU & EN 62133-2�2017 & 2015/863/EU & 2011/65/EU & 2023/1542/EU & 2014/53/EU & 2012/19/EU entspricht REACH(EG) Nr. 1907/2006 Dichiarazione di conformità Con la presente, Shenzhen Topstar Industry Co., Ltd. dichiara che questo prodotto è conforme alla direttiva 2014/30/UE e 2014/35/UE e EN 62133-2�2017 e 2015/863/UE e 2011/65/UE e 2023/1542/UE e 2014/53/UE e 2012/19/UE e REACH(CE) N. 1907/2006 適合宣言 Shenzhen Topstar Industry Co., Ltd. は、この製品が指令 2014/30/EU & 2014/35/EU & EN 62133-2�2017 & 2015/863/EU & 2011/65/EU & 2023/1542/EU & 2014/53/EU & に準拠している ことをここに宣言します。 2012/19/EU & REACH(EC) No. 1907/2006 DE EN US UK ITES FR DE CA IT ES FR JA NL SV DE IT DE IT ES FR ES FR JA JA…

Text truncated - open the document above for the full version.

2.911 (d)(5)(i) Equipment Type Attestation v1.2 Shenzhen Topstar Industry Co., Ltd. Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Shenzhen Topstar Industry Co., Ltd. Address: 4011, Baoshan Times Building, Minqiang Community, Minzhi Street,Longhua District, Shenzhen, Guangdong, China Product Name: INIU SnapGo Power Bank FCC ID: 2A2ND-P791 Model(s): P791 2.911(d)(5)(i) Equipment Type We, [Shenzhen Topstar Industry Co.,Ltd.] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Ruby Chen Date: 8/12/2026 Title and Company name: Product manager / Shenzhen Topstar Industry Co.,Ltd. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the- communications-supply-chain-through-the

2.911 (d)(5)(ii) Applicant Attestation v1.3 Shenzhen Topstar Industry Co., Ltd. Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen Topstar Industry Co., Ltd. Address: 4011, Baoshan Times Building, Minqiang Community, Minzhi Street,Longhua District, Shenzhen, Guangdong, China Product Name: INIU SnapGo Power Bank FCC ID: 2A2ND-P791 Model(s): P791 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Topstar Industry Co., Ltd.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Ruby Chen Date: 8/12/2026 Title and Company name: Product manager / Shenzhen Topstar Industry Co., Ltd NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the- communications-supply-chain-through-the

FCCUSAgent,LLC Date:7/8/2026 FederalCommunicationsCommissions AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 RE:CFR47§2.911(d)(7)FCCUSAgentLetterofAttestation FCCID:2A2ND-P791 GranteeFRN:0031156565 Towhomitmayconcern: FCCUSAgent FCCUSAgent,LLC FCCFRN:0033402884 TimPayne 3722IllinoisAvenue,SaintCharles,IL,60174,USA [email protected] ThisletteristoconfirmthatwehaveacceptedtheresponsibilitytoactasUSAgentonbehalf ofShenzhenTopstarIndustryCo.,Ltd.(“theapplicant”)2A2ND-P791. Weareawareoftherequirementsandresponsibilitiesoftheapplicant’sagentforserviceof processasoutlinedintheFCCsection2.911(d)(7)andReportandOrderFCC22-84 paragraph63. Sincerely, TimPayne Manager FCCUSAgent,LLC

ShenzhenTopstarIndustryCo.,Ltd. Date:7/8/2026 FederalCommunicationsCommissions AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 RE:CFR47§2.911(d)(7)AgentDesignationAttestation FCCID:2A2ND-P791 GranteeFRN:0031156565 ShenzhenTopstarIndustryCo.,Ltd.(“theapplicant”)asrequiredbysection2.911(d)(7), designatesthefollowingagent,locatedintheUnitedStates,forpurposesofactingasthe applicant’sagentforserviceofprocess. Theapplicantacknowledgesthattheywillmaintainanagentfornolessthanoneyearafter thegranteehasterminatedallmarketingandimportationortheconclusionofany Commission-relatedproceedinginvolvingtheequipment.Theapplicantfurther acknowledgestheirresponsibilityunderCFR47§2.929(c)toinformtheFCCwheneverthe agentinformationchanges. U.S.AgentInformation: ContactPerson:TimPayne CompanyName:FCCUSAgent,LLC FRN:0033402884 CompanyAddress:3722IllinoisAvenue,SaintCharles,IL,60174,USA Email:[email protected] Sincerelyyours, Name:RubyChen JobTitle:Manager CompanyName:ShenzhenTopstarIndustryCo.,Ltd.

Shenzhen Topstar Industry Co., Ltd. Agent Authorization Company name: Shenzhen Topstar Industry Co., Ltd. Address: 4011, Baoshan Times Building, Minqiang Community, Minzhi Street,Longhua District, Shenzhen, Guangdong, China Product Name: INIU SnapGo Power Bank Model Number(s): P791 Product Description: INIU SnapGo Power Bank We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 8/12/2026 Name: Ruby Chen Title: Product manager Company: Shenzhen Topstar Industry Co., Ltd.

Shenzhen Topstar Industry Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A2ND-P791 Date: 8/12/2026 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Ruby Chen Title: Product Manager

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. Appendix External Photographs Report No.: 4792130222-1-EP Report No.: 4792130222-1-EP Page 2 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Report No.: 4792130222-1-EP Page 3 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Report No.: 4792130222-1-EP Page 4 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Report No.: 4792130222-1-EP Page 5 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. END OF REPORT

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. Appendix Internal Photographs Report No.: 4792130222-1-IP Report No.: 4792130222-1-IP Page 2 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Report No.: 4792130222-1-IP Page 3 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Report No.: 4792130222-1-IP Page 4 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Report No.: 4792130222-1-IP Page 5 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. END OF REPORT

- Page 1 of 14 - Report No.: HB20260608001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: INIU SnapGo Power Bank Trade Mark: N/A Model Number: P791 FCC ID: 2A2ND-P791 Prepared for Shenzhen Topstar Industry Co., Ltd. 4011, Baoshan Times Building, Minqiang Community, Minzhi Street, Longhua District, SHENZHEN GUANGDONG 518100, CHINA Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 14 - Report No.: HB20260608001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT.......................................................................................................................................... 5 1.2 TEST MODE ...................................................................................................................................................... 5 1.3 TEST SETUP ...................................................................................................................................................... 6 1.4 ANCILLARY EQUIPMENT ....................................................................................................................................... 6 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 7 2.1 TEST LABORATORY .............................................................................................................................................. 7 2.2 ENVIRONMENTAL CONDITIONS .............................................................................................................................. 7 2.3 MEASUREMENT UNCERTAINTY ............................................................................................................................... 7 2.4 TEST SOFTWARE................................................................................................................................................. 7 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 8 4 RF EXPOSURE..................................................................................................................................................... 9 4.1 MAXIMUM PERMISSIBLE EXPOSURE ........................................................................................................................ 9 4.1.1. Limit ..................................................................................................................................................... 9 4.1.2. Test Procedures ..................................................................................................................................... 9 4.1.3. Test Setup ............................................................................................................................................. 9 4.1.4. Test Result ...........................................................................................................................................10 5 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................14 - Page 3 of 14 - Report No.: HB20260608001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Topstar Industry Co., Ltd. Address ................................. : 4011, Baoshan Times Building, Minqiang Community, Minzhi Street, Longhua District, SHENZHEN GUANGDONG 518100, CHINA Manufacturer's Name .......... : Shenzhen Topstar Industry Co., Ltd. Address ................................. : 4011, Baoshan Times Building, Minqiang Community, Minzhi Street, Longhua District, SHENZHEN GUANGDONG 518100, CHINA Product description Product name ........................ : INIU SnapGo Power Bank Model Number ....................... : P791 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test.......................................... : Date (s) of performance of tests ............. : June 08, 2026~June 15, 2026 Test Result ............................................ : Pass Testing Engineer : ( Z o e Su) Technical Manager : (Ha n s M o u) Authorized Signatory : (L e o S u) - Page 4 of 14 - Report No.: HB20260608001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 June 15, 2026 Original - Page 5 of 14 - Report No.: HB2026060…

Text truncated - open the document above for the full version.

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. FCC 47 CFR PART 15 SUBPART C CERTIFICATION TEST REPORT For INIU SnapGo Power Bank MODEL NUMBER: P791 REPORT NUMBER: 4792130222-1-RF-1 FCC ID: 2A2ND-P791 ISSUE DATE: June 5, 2026 Prepared for Shenzhen Topstar Industry Co.,Ltd. 4011, Baoshan Times Building, Minqiang Community, Minzhi Street, Longhua District, Shenzhen, Guangdong, China Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4792130222-1-RF-1 Page 2 of 32 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0053 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 June 5, 2026 Initial Issue REPORT NO.: 4792130222-1-RF-1 Page 3 of 32 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0053 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Summary of Test Results Description of Test Item Standard Results Radiated Emission Test FCC 15.209 PASS 20dB Bandwidth FCC 15.215 PASS AC Power Line Conducted Emission FCC Part 15.207 PASS Note 1: This test report is only published to and used by the applicant, and it is not for evidence purpose in China. Note 2: The measurement result for the sample received is <Pass> according to <FCC 47 CFR PART 15 SUBPART C> when <Simple Acceptance> decision rule is applied REPORT NO.: 4792130222-1-RF-1 Page 4 of 32 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0053 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................... 5 2. TEST METHODOLOGY ......................................................................................................... 6 3. FACILITIES AND ACCREDITATION ..................................................................................... 6 4. CALIBRATION AND UNCERTAINTY ................................................................................... 7 4.1. MEASURING INSTRUMENT CALIBRATION ........................................................... 7 4.2. MEASUREMENT UNCERTAINTY ............................................................................ 7 5. EQUIPMENT UNDER TEST .................................................................................................. 8 5.1. DESCRIPTION OF EUT ........................................................................................... 8 5.2. TEST MODE ............................................................................................................. 8 5.3. Support Units or Accessories for System Test .......................................................... 9 5.4. SETUP DIAGRAM FOR TEST .................................................................................. 9 6. MEASURING INSTRUMENT LIST ...................................................................................... 10 7. 20dB BANDWIDTH TEST ................................................................................................... 11 8. RADIATED EMISSION TEST .............................................................................................. 14 8.1. SPURIOUS EMISSIONS BELOW 30 MHz .............................................................. 18 8.1.1. Test result of 115-205 kHz ...................................................................................... 18 8.1.2. Test result of 360 kHz ............................................................................................. 21 8.2. SPURIOUS EMISSIONS 30 MHz ~ 1 GHz ............................................................. 24 8.2.1. Test result of 115-205 kHz ...................................................................................... 24 8.2.2. Test result of 360 kHz ............................................................................................. 26 9. AC POWER LINE CONDUCTED EMISSION ...................................................................... 28 REPORT NO.: 4792130222-1-RF-1 Page 5 of 32 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0053 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Shenzhen Topstar Industry Co.,Ltd. Address: 4011, Baoshan Times Building, Minqiang Community, Minzhi Street, Longhua District, Shenzhen, Guangdong, China Manufacturer Information Company Name: Shenzhen Topstar Industry Co.,Ltd. Address: 4011, Baoshan Times Building, Minqiang Community, Minzhi Street, Longhua District, Shenzhen, Guangdong, China EUT Information EUT Name: INIU SnapGo Power Bank Model: P791 Brand: INIU Sample Received Date: March 6, 2026 Sample Status: Normal Sample ID: 9483162-4 Date of Tested: March 6, 2026 to June 5, 2026 Prepared By: Checked By: James Qin Kebo Zhang Project Engineer Operations Leader Approved By: Stephen Guo Operations Manager APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47 CFR PART 15 SUBPART C PASS REPORT NO.: 4792130222-1-RF-1…

Text truncated - open the document above for the full version.

承 认 书 客户名称（CUSTOMER): 品名（DESCRIPTION) : DATE:2024/10/15 REV.NO.:A0 出线35MM线圈面背胶 部门 品质 工程 部门 开发工 程 采购 品质 ADD：深圳市龙华新区观澜环观中路48号1栋2楼 (盖公司公 章) 承 认 签核、盖章 何伟华 韦函满董晚红 备注： 韦立红韦立红 吕惠 客户料号（CUSTOMER P/N）:A.02.026.0036 规格（SPECIFICATION) ：纳米晶线圈/41.5/0.3厚/加20*0.8磁片 page:1/2 备注： 鸿日昇威科技承认签核、盖章 确认/日期审核/日期批准/日期 (盖公司公 章) SPECIFICATION FOR APPROVAL HRSW ELECTRONICS CO.,LTD TEL：15112254520 FAX：+86-0755-28015170 深 圳 市 鸿 日 昇 威 科 技 有 限 公 司 确认/日期审核/日期批准/日期 1.MECHANICAL DIMENSION (UNIT:mm) 2.SCHEMATICS: ABG DEH 41.5±0.0521.5±0.50.3±0.0235+2/-13±21.3MAX 3.WINDING： 1.1底部印字100 STE P TAPE REMAR K N1 4.ELECTRICAL SPECIFICATION: ITEM SPEC 5.BILF OF MATERIAL： NO.SGS NO. 1 2 3 4 5 6 7 page:2/2 SPECIFICATION FOR APPROVAL TITLE HRSW ELECTRONICS CO.,LTD 胶水 PART NO 高温胶纸 3mm宽高温胶纸 CUDAK CO.,LTD 备注：1中间加20*0.8MM小磁片 2.撕掉 背胶厚度1.3MM 以内(出线位置1.5MM） 3.线圈面背胶 背胶无 CUDAK CO.,LTD 无铅锡条 热风线0.08*65股 NANJINGJINNINGCO,LTD QIAODO 无铅锡条 自带3M胶 START-FINISH S-F L 线圈加磁片 11TS (Ref) ITEM 常温下 工作温度 TURNSWIRE TYPE 韦立红韦立红何伟华 APPROVED BY CHECKED BYDRAWN BY LIANCHENG CO.,LTD HI-POT 8.1uH±5% 100KHz,0.25V 热风线0.08*65股 AT 25°C MANUFACTURER 热风线 ⌀ 0.08*65 2UEW DCR TAIYI CO.,LTD 0-80°C MATERIAL SPECIFICATION 磁片 ⌀ 41.5*0..3纳米晶磁片开L槽 70mΩ Max TES T CON S-F

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. Appendix Setup Photographs Report No.: 4792130222-1-SP Report No.: 4792130222-1-SP Page 2 of 3 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. AC Power Line Conducted Emission Radiated emissions (below 30 MHz) Report No.: 4792130222-1-SP Page 3 of 3 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Radiated emissions (up to 1 GHz) END OF REPORT