2A2OH-O3030L5W DESK LAMP

ENGLISH - Instruction Manual Power button Brightness adjustment Choice of light shade Indicators on the base + MAX – MIN SCX Design® 5W Wireless Charging LED Desk Lamp Reference O30.30L/32501 Please read this intruction manual carefully before using the product. Product specifications · Materials: ABS + aluminium · Input (max): 5V/3A · Wireless output: 5W · USB output: 5V/1A Main functions 1. Switching on and wireless charging Connect the lamp using the supplied power cable. Press the power button to turn on the lamp. The surface in the middle of the base is a 5W wireless charging base. If your smartphone is compatible with induction technology, place it horizontally on the base and your smartphone screen will light up. 2. Light adjustment You can adjust the brightness as well as the shade of the light using the various touch indicators. Slide your finger to the right to increase the brightness, to the left to decrease it. To change the shade, press the M symbol to select the desired shade. Warning! - Do not place this product on a slippery surface. - Do not use this product near a heat source or in a humid environment. - Keep the product out of the reach of children. - Do not try to disassemble or repair the product. - LEDs are not replaceable. FCC Compliance Statements : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. · Lamp power (Max 4W, 5V/0.8A) · Brightness: 250 Lumen · LED: 52 LEDs SMD2835 · Includes a Type-C charging cable Bouton de mise en marche Ajustement de la luminosité Choix de la teinte de lumière Indicateurs sur la base + MAX – MIN SCX Design® 5W Wireless Charging LED Desk Lamp Référence O30.30L/32501 Avant toute utilisation du produit, veuillez lire le manuel d’instruction. Spécifications du produit · Matières : ABS + aluminium · Entrée (max): 5V/3A · Sortie sans fil : 5 W · Sortie USB: 5 V/1 A Fonctions principales 1. Mise en marche et chargement sans fil Branchez la lampe à l’aide du câble d’alimentation fourni. Pour allumer ou éteindre la lampe, appuyez sur le bouton de mise en marche. La surface au milieu du socle est une base de chargement à induction 5W. Si votre smartphone est compatible avec la technologie induction, posez le de façon horizontale sur la base, l’écran de votre smartphone s’illuminera alors. · Puissance de la lampe (Max 4W, 5V/0.8A) · Luminosité : 250 Lumen · LED : 52 LEDs SMD2835 · Comprend un câble de chargement Type-C 44 rue de la Jonquière Caution : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Never Store or use this product in temperatures below 32°F (0°C) or above 115°F (45°C). 44 rue de la Jonquière 2. Ajustement de la lumière Vous pouvez ajuster l’intensité ainsi que la teinte de la lumière à l’aide des différents indicateurs tactiles. Glissez votre doigt vers la droite pour augmenter la luminosité, vers la gauche pour la diminuer. Pour changer la teinte, appuyez sur le symbole M. Avertissement! - Ne pas placer ce produit sur une surface glissante. - Ne pas utiliser près d’une source de forte chaleur ou dans un environnement humide. - Garder le produit hors de portée des enfants. - Ne pas essayer de démonter ou de réparer le produit. - Les LEDs ne sont pas remplaçables. Déclaration de la FCC : Cet appareil est conforme à la partie 15 des règles de la FCC. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférences nuisibles et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences susceptibles de provoquer un fonctionnement indésirable. Remarque : cet équipement a été testé et déclaré conforme aux limites d'un appareil numérique de classe B, conformément à la partie 15 des règles de la FCC. Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère, utilise et peut émettre de l'énergie de fréquence radio et, s'il n'est pas installé et utilisé conformément aux instructions, peut causer des interférences nuisibles aux communications radio. Cependant, il n'y a aucune garantie que des interférences ne se produiront pas dans une installation particulière. Si cet équipement cause des interférences nuisibles à la réception radio ou télévision, ce qui peut être déterminé en …

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 1 of 6 Appendix External Photos for FYCR2209000346AT FCC ID: 2A2OH-O3030L Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 2 of 6 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 3 of 6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 4 of 6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 5 of 6 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A02 Rev.A/0 Page: 6 of 6

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 1 of 7 Appendix Internal Photos for FYCR2209000346AT FCC ID: 2A2OH-O3030L Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 2 of 7 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 3 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 4 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 5 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 6 of 7 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A03 Rev.A/0 Page: 7 of 7

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220900034603 Page: 1 of 9 Winkey Wang EMC Technical Manager TEST REPORT Application No.: FYCR2209000346AT (SGS SZ NO: T52210300144EM) Applicant: SCX DESIGN Address of Applicant: 44 rue de la Jonquière Paris 75017 France Manufacturer: SCX DESIGN Address of Manufacturer: 44 rue de la Jonquière Paris 75017 France Equipment Under Test (EUT): EUT Name: 5W DESK LAMP Model No.: 32501 Shipment Order No: 7156363 FCC ID: 2A2OH-O3030L Country of Origin China Country of Distribution: US Standard(s) : 47 CFR PART 1, Subpart I, Section 1.1310 47 CFR PART 2, Subpart J, Section 2.1091 Date of Receipt: 2022-09-01 Date of Test: 2022-09-26 Date of Issue: 2022-11-01 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220900034603 Page: 2 of 9 Revision Record Version Chapter Date Modifier Remark 01 2022-11-01 Original Authorized for issue by: Tree Zhan/Project Engineer Winkey Wang/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220900034603 Page: 3 of 9 2 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 CONTENTS ......................................................................................................................................... 3 3 GENERAL INFORMATION .................................................................................................................. 4 3.1 DETAILS OF E.U.T. ......................................................................................................................... 4 3.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 4 3.3 TEST LOCATION ............................................................................................................................. 4 3.4 TEST FACILITY ............................................................................................................................... 5 3.5 DEVIATION FROM STANDARDS ......................................................................................................... 5 3.6 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 5 4 EQUIPMENTS USED DURING TEST .................................................................................................. 6 5 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................. 7 5.1 MAGNETIC FIELD STRENGTH ............................................................................................................ 7 5.1.1 E.U.T. Operation ...................................................................................................................... 8 5.1.2 Test Setup Diagram ................................................................................................................. 8 5.1.3 Measurement Procedure and Data .......................................................................................... 9 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220900034603 Page: 4 of 9 3 General Information 3.1 Details of E.U.T. Power supply: Input: DC 5V/3A USB-A output：5V/1A Wireless output: 5W Cable(s): Type-C USB cable:150cm unshielded Operation frequency: 115.2kHz to 151kHz Modulation type: Load modulation Antenna type: Loop Antenna Remark: The information in this section is provided by the applicant or manufacturer, CCS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.2 Description of Support Units Description Manufacturer Model No. Serial No. Adapter Apple A2167 REF. No.SEA01A01 mobile phone SAMSUNG Galaxy S9 R58M681WFNB 3.3 Test Location All tests were performed at: Compliance Certification Services（Kunshan）Inc. Shenzhen branch. Fuyong lab. Xinlong TechnoPark,Fengtang Road, Fuyong Subdistrict, Bao’an, Shenzhen, China Tel: +86 755 8866 3988 Fax: +86 755 2671 0594 No tests were sub-contracted. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220900034603 Page: 5 of 9 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6606.01) Compliance Certification Services（Kunshan）Inc. Shenzhen branch is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 6606.01. • FCC –Designation Number: CN1322 Compliance Certification Services（Kunshan）Inc. Shenzhen branch has been recognized as an accredited testing laboratory. Designation Number: CN1322. Test Firm Registration Number: 718073 • Innovation, Science and Economic Development Canada Compliance Certification Services（Kunshan）Inc. Shenzhen branch has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0129. IC#: 28189. 3.5 Deviation from Standards None 3.6 Abnormalities from Standard Conditions None Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220900034603 Page: 6 of 9 4 Equipments Used during Test Item Test Equipment Manufacturer Model No. Inventory No.Cal. Due date 1 3m Anechoic Chamber CRT N/A SEM001-13 2024/7/12 2 Electric and Magnetic Field Analyzer Narda EHP-200AC SEM022-20 2023-04-01 Test Mode Description Pre-scan / Final test Mode Code Description Final test 00 Charge mode_Keep the EUT charging(5W) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220900034603 Pag…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220900034602 Page: 1 of 27 Winkey Wang EMC Technical Manager TEST REPORT Application No.: FYCR2209000346AT (SGS SZ NO: T52210300144EM) Applicant: SCX DESIGN Address of Applicant: 44 rue de la Jonquière Paris 75017 France Manufacturer: SCX DESIGN Address of Manufacturer: 44 rue de la Jonquière Paris 75017 France Equipment Under Test (EUT): EUT Name: 5W DESK LAMP Model No.: 32501 Shipment Order No: 7156363 FCC ID: 2A2OH-O3030L Country of Origin China Country of Distribution: US Standard(s) : 47 CFR Part 15, Subpart C Date of Receipt: 2022-09-01 Date of Test: 2022-09-09 to 2022-10-27 Date of Issue: 2022-11-01 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220900034602 Page: 2 of 27 Revision Record Version Chapter Date Modifier Remark 01 2022-11-01 Original Authorized for issue by: Tree Zhan/Project Engineer Winkey Wang/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220900034602 Page: 3 of 27 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Mains Power Port (150kHz-30MHz) 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions (30MHz-1GHz) ANSI C63.10 (2013) Section 6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Emissions (9kHz-30MHz) ANSI C63.10 (2013) Section 6.4 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass 20dB Bandwidth ANSI C63.10 (2013) Section 6.9.2 47 CFR Part 15, Subpart C 15.215 Pass Restricted Bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 Pass Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/0 Aug01,2022 Report No.: FYCR220900034602 Page: 4 of 27 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 6 4.1 DETAILS OF E.U.T. ......................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 6 4.4 TEST LOCATION ............................................................................................................................. 7 4.5 TEST FACILITY ............................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ......................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 7 5 EQUIPMENT LIST ............................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................10 6.1 ANTENNA REQUIREMENT ................................................................................................................10 6.1.1 Test Requirement: ..................................................................................................................10 6.1.2 Conclusion ..............................................................................................................................10 7 RADIO SPECTRUM MATTER TEST RESULTS .................................................................................11 7.1 CONDUCTED EMISSIONS AT AC MAINS POWER PORT (150KHZ-30MHZ) ............................................11 7.1.1 E.U.T. Operation .....................................................................................................................11 7.1.2 Test Mode Description ............................................................................................................11 7.1.3 Test Setup Diagram ................................................................................................................11 7.1.4 Measurement Procedure and Data .........................................................................................12 7.2 RADIATED EMISSIONS (30MHZ-1GHZ) ............................................................................................15 7.2.1 E.U.T. Operation .....................................................................................................................15 7.2.1 Test Mode Description ............................................................................................................15 7.2.2 Test Setup Diagram ................................................................................................................15 7.2.3 Measurement Procedure and Data .........................................................................................16 7.3 RADIATED EMISSIONS (9KHZ-30MHZ) ..................................…

Text truncated - open the document above for the full version.

Antenna Data Sheet Antenna type: Loop antenna Coil diameters: 4.4cm Number of turns: 10

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A04 Rev.A/0 Page: 1 of 3 Appendix Test Setup Photos for FYCR2209000346AT FCC ID: 2A2OH-O3030L Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A04 Rev.A/0 Page: 2 of 3 Test Setup Photo Conducted Emissions at AC Mains Power Port (150kHz-30MHz) Radiated Emissions (30MHz-1GHz) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A04 Rev.A/0 Page: 3 of 3 Radiated Emissions (9kHz-30MHz)

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A04 Rev. A/0 Page: 1 of 4 RF Exposure Setup Photos for FYCR2209000346AT FCC ID: 2A2OH-O3030L Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A04 Rev. A/0 Page: 2 of 4 Photographs Side 1 Side 2 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A04 Rev. A/0 Page: 3 of 4 Side 3 Side 4 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-A04 Rev. A/0 Page: 4 of 4 Top