2A2QB-FWOSFirewalla Orange USA, Firewalla Orange World

Firewalla INC

Application Details

Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Date of Grant: Jan 07, 2026
Application Purpose: Original Equipment
Equipment Note: Firewalla Orange USA, Firewalla Orange World
Frequency Range: 2402.00000000 - 2480.00000000
Company: Firewalla INC
Country: United States

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Attestation Statements

Grantee also Agent for Service of Process_FCC_Attestation Statements_Kiwa Page 1 of 2 RF_754_02 15-02-2023 Firewalla INC U.S. Agent Designation for Service of Process (Applicant is Both Grantee and U.S. Agent) TO: Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTENTION: FCC Certification – Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant & Agent Company name: Firewalla INC FRN: 0031196207 Grantee Code: 2A2QB Contact person name: Jerry Chen Agent name: Firewalla INC Street address: 19630 Allendale Ave #2217 ZIP/City/State 95070 / Saratoga / California Telephone number: 4086411688 Email address: [email protected] Signature Contact person*: Date: Signature Agent*: Date: Note *Must be signed by both the applicant, and agent on behalf

Attestation Statements

Covered list attestation FCC application letter Kiwa Page 1 of 1 RF_755_03 06-06-2024 Firewalla INC Certification Application Attestation Statements Firewalla INC 0031196207 19630 Allendale Ave #2217 95070 Saratoga California United States Subject: FCC ID: 2A2QB-FWOS To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) Firewalla INC certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) Firewalla INC (“the applicant”) certifies that, as of the date of the filing of this application, the applicant - is / - is not (3) identified on the Covered List as an entity producing “covered” equipment. Date: 2025-12-23 City: Saratoga Name (2) : Jerry Chen Function: CEO Telephone number: 4086411688 Email address: [email protected] Signature: 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK”

Cover Letter(s)

RF_160_06 Declaration of Authorization Date of issue 13-08-2025 Firewalla INC Declaration of Authorization We Name: Firewalla INC Address: 19630 Allendale Ave #2217 City: Saratoga State: California Country: United States 95070 Declare that: Name Representative of agent: Ms. Grace Chen Agent Company name: BTL Inc. Address: 4F., No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., City: Taipei City Country 114 Taiwan is authorized to apply for Certification of the following product(s): Product description: Firewalla Orange USA, Firewalla Orange World Type designation: FWOS, FWOS-W Trademark: Firewalla Validity/ expiry date 2025/12/23-2026/12/22 on our behalf. Date: 2025-12-23 City: Saratoga Name: Jerry Chen Function: CEO Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

Cover Letter(s)

FCC, Request for non-disclosure Date: 18-08-2025 RF_501, Issue 12 Page 1 of 2 Company Name: Firewalla INC Address: 19630 Allendale Ave #2217 City: Saratoga State: California Country: United States 95070 To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: 2A2QB-FWOS Reference number: N/A Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: To prevent premature disclosure of sensitive product details that would cause commercial harm prior to product launch. Date: 2025-12-23 Name and signature of applicant: Jerry Chen Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period

Cover Letter(s)

Model Declaration Letter We, the undersigning company Company Name: Firewalla INC Address: 19630 Allendale Ave #2217 Saratoga California United States 95070 Hereby confirm that the following products: Product description: Firewalla Orange USA, Firewalla Orange World Type designation: FWOS, FWOS-W Trademark: Firewalla The differences are as below: Model Name Product Name FWOS Firewalla Orange USA FWOS-W Firewalla Orange World Except for the differences above, all models are electrically identical (Include: circuitry, components, layout and antenna type). Name: Jerry Chen Telephone: 4086411688 E-mail: [email protected] Signature:

ID Label/Location Info

S/N: ORNGYMS000001 UPC: 850015548208 Indoor use only FCC ID: 2A2QB-FWOS Made in Taiwan Designed in Silicon Valley Input: 12V1.5A Model: FWOS UPC: 850015548208S/N: ORNGYMS000001 Designed in Silicon Valley Made in Taiwan

RF Exposure Info

Report No.: BTL-FCCP-6-2510T110 Project No.: 2510T110 Page 1 of 9 Report Version: R00 FCC RF Exposure Report FCC ID: 2A2QB-FWOS Report No. : BTL-FCCP-6-2510T110 Equipment : (1) Firewalla Orange USA (2) Firewalla Orange World Model Name : (1) FWOS (2) FWOS-W Brand Name : Firewalla Applicant : Firewalla INC Address : 19630 Allendale Ave #2217, Saratoga, CA 95070, United States FCC Rule Part(s) : 47 CFR § 2.1091 IEEE C95.1 Date of Receipt : 2025/10/22 Date of Test : 2025/11/19 ~ 2025/12/9 Issued Date : 2025/12/30 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Brett Shen, Engineer Approved by : Jerry Chuang, Vice Manager BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-6-2510T110 Project No.: 2510T110 Page 2 of 9 Report Version: R00 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the Customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-6-2510T110 Project No.: 2510T110 Page 3 of 9 Report Version: R00 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-6-2510T110 R00 Original Report. 2025/12/30 Valid Report No.: BTL-FCCP-6-2510T110 Project No.: 2510T110 Page 4 of 9 Report Version: R00 1. LIMITS According to § 1.1310 Radiofrequency radiation exposure limits. (a) Specific absorption rate (SAR) shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in § 1.1307(b) of this part within the frequency range of 100 kHz to 6 GHz (inclusive). (b) The SAR limits for occupational/controlled exposure are 0.4 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 8 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit for occupational/controlled exposure is 20 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 6 minutes to determine compliance with occupational/controlled SAR limits. (c) The SAR limits for general population/uncontrolled exposure are 0.08 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 1.6 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit is 4 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 30 minutes to determine compliance with general population/uncontrolled SAR limits. (e) Limits for Maximum Permissible Exposure (MPE) to radiofrequency electromagnetic fields (Table 1). Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *(100) ≤6 3.0-30 1842/f 4.89/f *(900/f 2 ) <6 30-300 61.4 0.163 1.0 <6 300-1.500 f/300 <6 1.500-100.000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) <30 1.34-30 824/f 2.19/f *(180/f 2 ) <30 30-300 27.5 0.073 0.2 <30 300-1.500 f/1500 <30 1.500-100.000 1.0 <30 f = frequency in MHz. * = Plane-wave equivalent power density. Report No.: BTL-FCCP-6-2510T110 Project No.: 2510T110 Page 5 of 9 Report Version: R00 2. APPLIED EXEMPTION CRITERIA Refer to KDB 447498 D04, ticked item is applied: For RF Exposure Test Exemptions for Single Source: ☐ 1-mW Test Exemption Per § 1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz t…

Text truncated - open the document above for the full version.

Test Report

LYNwave Technology 2025 www.lynwave.com Copyright © 2021 LynwaveTechnology Ltd. All rights reserved. 3F-6, No.327, Xuecheng Rd., Sanxia Dist., New Taipei City 237624, Taiwan www.lynwave.com +886 2 3501 8700 Antenna Field Test Report Company:Edimax Project Name:GW-8476FAX(Firewalla) Model Name: Application: Mounting Type:Desktop DateOwnerCheckRevisionHistory 2025/07/29JasonMichaelv0.11. Antenna sample measurement 2025/09/11JasonMichaelv0.21. Antenna sample measurement 2025/09/17JasonMichaelv0.31. Antenna sample measurement 2025/11/10JasonMichaelv0.41. Antenna sample measurement Copyright © 2021 LynwaveTechnology Ltd. All rights reserved. 3F-6, No.327, Xuecheng Rd., Sanxia Dist., New Taipei City 237624, Taiwan www.lynwave.com +886 2 3501 8700 Table of Contents A.Antenna RF Characteristics 1.Antenna Placement 2.S-Parameters 3.Coordinate Definition 4.Gain Table 5.Isolation Table 6.Radiation Patterns 7.Summary Copyright © 2021 LynwaveTechnology Ltd. All rights reserved. 3F-6, No.327, Xuecheng Rd., Sanxia Dist., New Taipei City 237624, Taiwan www.lynwave.com +886 2 3501 8700 Antenna Placement No.FunctionMaterialDimension(mm)Frequency(MHz)Remark Ant.1Wi-Fi Dual-BandPCB96*22.1*0.6 2400 –2500 5150 –5850 Ant.2Wi-Fi Dual-BandPCB96*22.1*0.6 2400 –2500 5150 –5850 Ant.3BTPCBTBD2400 –2500 Ant.1 Ant.2 Ant.3 Copyright © 2021 LynwaveTechnology Ltd. All rights reserved. 3F-6, No.327, Xuecheng Rd., Sanxia Dist., New Taipei City 237624, Taiwan www.lynwave.com +886 2 3501 8700 S-Parameters –Ant.1 / Ant.2 / Ant.3 (Wi-Fi Dual-Band / BT) Ant.1Ant.2 Ant.3 Ant.1 to Ant.2Ant.1 to Ant.3 Ant.2 to Ant.3 S-Parameters –Ant.1 / Ant.2 / Ant.3 (Wi-Fi Dual-Band to BT) Copyright © 2021 LynwaveTechnology Ltd. All rights reserved. 3F-6, No.327, Xuecheng Rd., Sanxia Dist., New Taipei City 237624, Taiwan www.lynwave.com +886 2 3501 8700 Coordinate Definition Y Z X x Copyright © 2021 LynwaveTechnology Ltd. All rights reserved. 3F-6, No.327, Xuecheng Rd., Sanxia Dist., New Taipei City 237624, Taiwan www.lynwave.com +886 2 3501 8700 Gain Table No.Frequency(MHz) 2400245025005200530056005785 Ant.1 PeakGain(dBi) 2.52.62.54.13.84.03.9 Efficiency(%) 62636263616564 Ant.2 PeakGain(dBi) 3.34.03.94.04.34.84.2 Efficiency(%) 60636361626364 Item Worst mutual isolation (dB) 2.4GHz Band Worst mutual isolation (dB) 5GHz Band AntennaAnt.1Ant.2Ant.1Ant.2 Ant.1-20.2-33.0 Ant.2 Ant.3-28.7-12.8-30.7-29.5 Isolation Table –Ant.1 / Ant.2 / Ant.3 No.Frequency(MHz) 240024502500 Ant.3 PeakGain(dBi) 3.33.83.9 Efficiency(%) 606162 Copyright © 2021 LynwaveTechnology Ltd. All rights reserved. 3F-6, No.327, Xuecheng Rd., Sanxia Dist., New Taipei City 237624, Taiwan www.lynwave.com +886 2 3501 8700 2D Radiation Pattern Ant.1 (Wi-Fi Dual-Band) Frequency(MHz) : 2400-2500 Azimuth Plane Theta = 90 Elevation Plane phi = 0 Radiation Pattern : Elevation Plane phi = 90 Setup : Z XX Y Z Y Copyright © 2021 LynwaveTechnology Ltd. All rights reserved. 3F-6, No.327, Xuecheng Rd., Sanxia Dist., New Taipei City 237624, Taiwan www.lynwave.com +886 2 3501 8700 2D Radiation Pattern Ant.1 (Wi-Fi Dual-Band) Frequency(MHz) : 5200-5785 Azimuth Plane Theta = 90 Elevation Plane phi = 0 Radiation Pattern : Elevation Plane phi = 90 Setup : Z XX Y Z Y Copyright © 2021 LynwaveTechnology Ltd. All rights reserved. 3F-6, No.327, Xuecheng Rd., Sanxia Dist., New Taipei City 237624, Taiwan www.lynwave.com +886 2 3501 8700 2D Radiation Pattern Ant.2 (Wi-Fi Dual-Band) Frequency(MHz) : 2400-2500 Azimuth Plane Theta = 90 Elevation Plane phi = 0 Radiation Pattern : Elevation Plane phi = 90 Setup : Z XX Y Z Y Copyright © 2021 LynwaveTechnology Ltd. All rights reserved. 3F-6, No.327, Xuecheng Rd., Sanxia Dist., New Taipei City 237624, Taiwan www.lynwave.com +886 2 3501 8700 2D Radiation Pattern Ant.2 (Wi-Fi Dual-Band) Frequency(MHz) : 5200-5785 Azimuth Plane Theta = 90 Elevation Plane phi = 0 Radiation Pattern : Elevation Plane phi = 90 Setup : Z XX Y Z Y Copyright © 2021 LynwaveTechnology Ltd. All rights reserved. 3F-6, No.327, Xuecheng Rd., Sanxia Dist., New Taipei City 237624, Taiwan www.lynwave.com +886 2 3501 8700 2D Radiation Pattern Ant.3 (BT) Frequency(MHz) : 2400-2500 Azimuth Plane Theta = 90 Elevation Plane phi = 0 Radiation Pattern : Elevation Plane phi = 90 Setup : Z XX Y Z Y Copyright © 2021 LynwaveTechnology Ltd. All rights reserved. 3F-6, No.327, Xuecheng Rd., Sanxia Dist., New Taipei City 237624, Taiwan www.lynwave.com +886 2 3501 8700 Summary SummaryAnt.1Ant.2Ant.3Remark Return Loss – 2.4GHz < -10dB< -10dB< -10dB Return Loss – 5GHz < -10dB< -10dB Efficiency – 2.4GHz > 60%> 60%> 60% Efficiency –5GHz>60%> 60% Peak Gain – 2.4GHz 2.5 –2.6dBi3.3 –4.0dBi3.3 –3.9dBi Peak Gain –5GHz3.8 –4.1dBi4.0 –4.8dBi 1.Passive testing was conducted using the new housing, Mylar, and new antenna. 2.We have optimized the BT antenna. Copyright © 2021 LynwaveTechnology Ltd. All rights reserved. 3F-6, No.327, Xuecheng Rd., Sanxia Dist., New Taipei City 237624, Taiwan www.lynwave.com +886 2 3501 8700 www.lynwave.com https://www.facebook.com/LYNwaveTechnology/ https://lynwave.en.alibaba.com/ https://www.linkedin.com/company/lynwave-technology-ltd./

Test Report

Report No.: BTL-FCCP-1-2510T110 Project No.: 2510T110 Page 1 of 74 Report Version: R00 FCC Radio Test Report FCC ID: 2A2QB-FWOS Report No. : BTL-FCCP-1-2510T110 Equipment : (1) Firewalla Orange USA (2) Firewalla Orange World Model Name : (1) FWOS (2) FWOS-W Brand Name : Firewalla Applicant : Firewalla INC Address : 19630 Allendale Ave #2217, Saratoga, CA 95070, United States Radio Function : Bluetooth FCC Rule Part(s) : FCC CFR Title 47, Part 15, Subpart C (15.247) Measurement Procedure(s) : ANSI C63.10-2020 Date of Receipt : 2025/10/22 Date of Test : 2025/11/19 ~ 2025/12/9 Issued Date : 2025/12/30 The above equipment has been tested and found in compliance with the requirement of the above standards by BTL Inc. Prepared by : Brett Shen, Engineer Approved by : Jerry Chuang, Vice Manager BTL Inc. No.18, Ln. 171, Sec. 2, Jiuzong Rd., Neihu Dist., Taipei City 114, Taiwan Tel: +886-2-2657-3299 Fax: +886-2-2657-3331 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-1-2510T110 Project No.: 2510T110 Page 2 of 74 Report Version: R00 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the Customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2510T110 Project No.: 2510T110 Page 3 of 74 Report Version: R00 CONTENTS REVISION HISTORY 5 1 SUMMARY OF TEST RESULTS 6 1.1 TEST FACILITY 7 1.2 MEASUREMENT UNCERTAINTY 7 1.3 TEST ENVIRONMENT CONDITIONS 8 1.4 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 8 1.5 DUTY CYCLE 9 2 GENERAL INFORMATION 10 2.1 DESCRIPTION OF EUT 10 2.2 TEST MODES 12 2.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 2.4 SUPPORT UNITS 14 3 AC POWER LINE CONDUCTED EMISSIONS TEST 15 3.1 LIMIT 15 3.2 TEST PROCEDURE 15 3.3 DEVIATION FROM TEST STANDARD 15 3.4 TEST SETUP 16 3.5 TEST RESULT 16 4 RADIATED EMISSIONS TEST 17 4.1 LIMIT 17 4.2 TEST PROCEDURE 18 4.3 DEVIATION FROM TEST STANDARD 18 4.4 TEST SETUP 18 4.5 EUT OPERATING CONDITIONS 19 4.6 TEST RESULT – 9 KHZ TO 30 MHZ 20 4.7 TEST RESULT – 30 MHZ TO 1 GHZ 20 4.8 TEST RESULT – ABOVE 1 GHZ 20 5 NUMBER OF HOPPING CHANNEL 21 5.1 APPLIED PROCEDURES 21 5.2 TEST PROCEDURE 21 5.3 DEVIATION FROM STANDARD 21 5.4 TEST SETUP 21 5.5 EUT OPERATION CONDITIONS 21 5.6 TEST RESULTS 21 6 AVERAGE TIME OF OCCUPANCY 22 6.1 APPLIED PROCEDURES / LIMIT 22 6.2 TEST PROCEDURE 22 6.3 DEVIATION FROM STANDARD 22 6.4 TEST SETUP 22 6.5 EUT OPERATION CONDITIONS 22 6.6 TEST RESULTS 22 7 HOPPING CHANNEL SEPARATION MEASUREMENT 23 7.1 APPLIED PROCEDURES / LIMIT 23 7.2 TEST PROCEDURE 23 7.3 DEVIATION FROM STANDARD 23 7.4 TEST SETUP 23 7.5 TEST RESULTS 23 Report No.: BTL-FCCP-1-2510T110 Project No.: 2510T110 Page 4 of 74 Report Version: R00 8 BANDWIDTH TEST 24 8.1 APPLIED PROCEDURES 24 8.2 TEST PROCEDURE 24 8.3 DEVIATION FROM STANDARD 24 8.4 TEST SETUP 24 8.5 EUT OPERATION CONDITIONS 24 8.6 TEST RESULTS 24 9 OUTPUT POWER TEST 25 9.1 APPLIED PROCEDURES / LIMIT 25 9.2 TEST PROCEDURE 25 9.3 DEVIATION FROM STANDARD 25 9.4 TEST SETUP 25 9.5 EUT OPERATION CONDITIONS 25 9.6 TEST RESULTS 25 10 ANTENNA CONDUCTED SPURIOUS EMISSION 26 10.1 APPLIED PROCEDURES / LIMIT 26 10.2 TEST PROCEDURE 26 10.3 DEVIATION FROM STANDARD 26 10.4 TEST SETUP 26 10.5 EUT OPERATION CONDITIONS 26 10.6 TEST RESULTS 26 11 LIST OF MEASURING EQUIPMENTS 27 12 EUT TEST PHOTO 29 13 EUT PHOTOS 29 APPENDIX A AC POWER LINE CONDUCTED EMISSIONS 30 APPENDIX B RADIATED EMISSIONS - 9 KHZ TO 30 MHZ 35 APPENDIX C RADIATED EMISSIONS - 30 MHZ TO 1 GHZ 40 APPENDIX D RADIATED EMISSIONS - ABOVE 1 GHZ 43 APPENDIX E NUMBER OF HOPPING CHANNEL 62 APPENDIX F AVERAGE TIME OF OCCUPANCY 64 APPENDIX G HOPPING CHANNEL SEPARATION MEASUREMENT 66 APPENDIX H BANDWIDTH 68 APPENDIX I OUTPUT POWER 70 APPENDIX J ANTENNA CONDUCTED SPURIOUS EMISSION 72 Report No.: BTL-FCCP-1-2510T110 Project No.: 2510T110 Page 5 of 74 Report Version: R00 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-1-2510T110 R00 Original Report. 2025/12/30 Valid Report No.: BTL-FCCP-1-2510T110 Project No.: 2510T110 Page 6 of 74 Report Version: R00 1 SUMMARY OF TEST RESULTS Test procedures according to the technical standards. Standard(s) Section Description Test Result Judgement Remark 15.207 AC Power Line Conducted Emissions APPENDIX A Pass ------ 15.205 15.209 15.247(d) Radiated Emissions APPENDIX B APPENDIX C APPE…

Text truncated - open the document above for the full version.

Test Setup Photos

Appendix No.: TP-2510T110-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2510T110 Page 1 of 6 AC Power Line Conducted Emissions test photos Appendix No.: TP-2510T110-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2510T110 Page 2 of 6 Radiated emissions test photos 9 KHZ to 30 MHZ Appendix No.: TP-2510T110-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2510T110 Page 3 of 6 Radiated emissions test photos 30 MHz to 1 GHz Appendix No.: TP-2510T110-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2510T110 Page 4 of 6 Radiated emissions test photos Above 1 GHz Appendix No.: TP-2510T110-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2510T110 Page 5 of 6 Radiated emissions test photos Above 18 GHz Appendix No.: TP-2510T110-FCCP-1 APPENDIX-TEST PHOTOS Project No.: 2510T110 Page 6 of 6 DFS test photos

Contact Information

Applicant

Jerry Chen(CEO)

[email protected]Fax: 4086411688

Technical Contact

Firewalla INCJerry Chen

[email protected]Fax: 4086411688

19630 Allendale Ave #2217 · United States

Test Firm

BTL Inc.Jackie Chiu

[email protected]Fax: +886-2-2641-8698

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15C	2.40 GHz - 2.48 GHz	36.00 mW

Confidentiality

Long Term

Grant Notes

Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance.