Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Covered Equipment Certification Attestation Letter 6/16/2025 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2A2QMMO3-I900M Medit Corp. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. This includes certifying that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Medit Corp. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Seongwoon Cho Title: PQA Part Leader Company Name: Medit Corp. Date: 6/16/2025
* the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter June 24, 2025 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2A2QMMO3-I900M Per section 2.911(d)(7) of the FCC rules, Medit Corp. (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process: Company Name: JNM GROUP INC. Physical U.S. Company Address: 8 The Green #11108, Dover, DE 19901, United States of America Agent name: Young Ju, Kim Agent Email Address: [email protected] FRN: 0035645514 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant): Signed: Signed: Printed name: Seongwoon Cho Printed name: Young Ju, Kim Title: PQA Part Leader Title: Director Company Name: Medit Corp. Company Name: JNM GROUP INC. Date: June 12, 2025 Date: June 24, 2025
* the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter June 24, 2025 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2A2QMMO3-I900M Per section 2.911(d)(7) of the FCC rules, Medit Corp. (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process: Company Name: JNM GROUP INC. Physical U.S. Company Address: 8 The Green #11108, Dover, DE 19901, United States of America Agent name: Young Ju, Kim Agent Email Address: [email protected] FRN: 0035645514 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant): Signed: Signed: Printed name: Seongwoon Cho Printed name: Young Ju, Kim Title: PQA Part Leader Title: Director Company Name: Medit Corp. Company Name: JNM GROUP INC. Date: June 12, 2025 Date: June 24, 2025
6/16/2025 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 AUTHORITY TO ACT AS AGENT - FCC On our behalf, I appoint Nemko Korea Co.,Ltd. (165-51, Yurim-ro, Cheoin-gu, Yongin-si, Gyeonggi- do, 17042, Korea), to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti- Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko North America Inc., still resides still resides with us. Sincerely, Printed name : Seongwoon Cho
August 2, 2025 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: 2A2QMMO3-I900M Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view for a period of 180 days. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform Nemko to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☒ Short Term Internal Photos ☐ Permanent* ☒ Short Term Operation Description ☒ Permanent ☐ Short Term Parts List & Placement/BOM ☒ Permanent ☐ Short Term Tune-Up Procedure ☒ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term Test Setup Photos ------------------ ☒ Short Term User’s Manual ☐ Permanent* ☒ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have “Permanent” confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, Signed: Printed name: Seongwoon Cho Title: PQA Part Leader Company Name: Medit Corp.
FCC ID: 2A2QMMO3-I900M/IC: 27675-MO3I900M Software Security Description – KDB 594280 D02v01r03 Section II General Description 1. Describe how any software/firmware updates for elements than can affect the device’s RF parameters will be obtained, downloaded, validated and installed. For software that is accessed through manufacturer’s website or device’s management system, describe the different levels of security as appropriate. Firmware updates for the device can only be performed through the manufacturer's software. Users or administrators log in to the manufacturer's secure server and download the firmware using an authenticated account. The integrity and legitimacy of the firmware are verified using a SHA-256 hash. Only when the verification is successfully completed does the firmware installation begin. General users do not have access to the firmware update function and only receive automatic update notifications. 2. Describe the RF parameters that are modified by any software/firmware without any hardware changes. Are these parameters in some way limited such that any other software/firmware changes will not allow the device to exceed the authorized RF characteristics? In this device, the following RF parameters can be configured in a limited manner through firmware without hardware modification: Transmit power Channel number or channel bandwidth Communication mode However, all these parameters can only be adjusted within predefined configuration ranges, which are designed to prevent exceeding the certified RF characteristics (such as transmit power, spectrum mask, frequency range). Specifically, The certified parameter values are hardcoded in the firmware as upper limits, so settings exceeding these values cannot be applied. The values that users can access are restricted in the UI, and even with administrator privileges, RF-related values cannot be directly entered or manipulated. All RF settings are automatically verified to be within the RF authorization range by integrity verification logic when the device boots or when settings are changed. FCC ID: 2A2QMMO3-I900M/IC: 27675-MO3I900M 3. Describe in detail the authentication protocols that are in place to ensure that the source of the RF-related software/firmware is valid. Describe in detail how the RF-related software is protected against modification. The firmware installation module verifies the SHA-256 hash value before executing the firmware. If the verification fails, the installation or booting is halted and the device enters an error state. Firmware distribution is only possible via the central server or by authorized installers. 4. Describe in detail any encryption methods used to support the use of legitimate RF-related software/firmware. An encrypted authentication protocol is used. During the wireless authentication process, authentication is performed through an encrypted challenge-response method. For example, the device receives an encrypted random value from the server and returns a response encrypted with a secret key, thereby verifying legitimacy. 5. For a device that can be configured as a master and client (with active or passive scanning), explain how the device ensures compliance for each mode? In particular if the device acts as master in some band of operation and client in another; how is compliance ensured in each band of operation? N/A Third-Party Access Control 1. Explain if any third parties have the capability to operate a U.S.-sold device on any other regulatory domain, frequencies, or in any manner that may allow the device to operate in violation of the device’s authorization if activated in the U.S. Such a method constitutes a violation of FCC regulations, and third parties cannot operate the device in that way. Such a method constitutes a violation of FCC regulations, and third parties cannot operate the device in that way. FCC ID: 2A2QMMO3-I900M/IC: 27675-MO3I900M 2. Describe, if the device permits third-party software or firmware installation, what mechanisms are provided by the manufacturer to permit integration of such functions while ensuring that the RF parameters of the device cannot be operated outside its authorization for operation in the U.S. In the description include what controls and/or agreements are in place with providers of third-party functionality to ensure the devices’ underlying RF parameters are unchanged and how the manufacturer verifies the functionality. Installation of third-party software/firmware is not permitted. 3. For Certified Transmitter modular devices, describe how the module grantee ensures that host manufacturers fully comply with these software security requirements for U-NII devices. If the module is controlled through driver software loaded in the host, describe how the drivers are controlled and managed such that the modular transmitter RF parameters are not modified outside the grant of authorization. N/A Software Configuration Description – KDB 594280 D02v01r03 Section III USER CONFIGURATION GUIDE 1. Describe the user configurations permitted through the UI. If different levels of access are permitted for professional installers, system integrators or end-users, describe the differences. a. What parameters are viewable and configurable by different parties? Professional Installer: Channel selection (within approved frequency range), operation mode, system log, and advanced network settings General User: SSID and password changes only b. What parameters are accessible or modifiable by the professional installer or system integrators? (1) Are the parameters in some way limited, so that the installers will not enter parameters that exceed those authorized? Yes. Channel selection, operation mode, etc., are all restricted so as not to exceed FCC- approved parameter ranges. Settings outside permitted ranges are hidden or disabled in the UI, and internal system restrictions are also applied. (2) What controls exist that the user cannot ope…
Text truncated - open the document above for the full version.
Medit Corp. FCC ID : 2A2QMMO3-I900M / IC:27675-MO3I900M LABELLING REQUIREMENTS Labelling Requirements Since the product size is too small, the 15.19(a)(3) statement is placed in the manual and on the device packaging. § 15.19 (a)(5) Labeling requirements: When the device is so small or for such use that it is impracticable to label it with the statement specified under paragraph (a) of this section in a font that is four-point or larger, and the device does not have a display that can show electronic labeling, then the information required by this paragraph shall be placed in the user manual and must also either be placed on the device packaging or on a removable label attached to the device. RSS-Gen Section 4. Labelling requirements: If the dimensions of the product are extremely small or it is not practical to place the label or marking on the product, and if electronic labelling cannot be implemented, the label shall be placed in a prominent location in the user manual supplied with the product, as agreed upon with ISED prior to the certification application. The user manual may be in an electronic format; if it is not supplied to the user, the user manual must be readily available. Medit Corp. FCC ID : 2A2QMMO3-I900M / IC:27675-MO3I900M Label Location END
Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 1 of 149 Nemko Korea Co., Ltd. <XULPUR&KHRLQJX<RQJLQVL*\HRQJJLGR5HSXEOLFRI.RUHD 7(/ )$; )&&6$5$3' ,3'(9$/8$7,215(3257)25&(57,),&$7,21 3URMHFW1R 1.5'DWHVRIUHFHLSW )HEUXDU\ $SSOLFDQW 0HGLW&RUS 'DWHVRI,VVXH $XJXVW )))))<DQJS\HRQJUR JLO<HRQJGHXQJSRJX6HRXO .RUHD5HSXEOLFRI 7HVW6LWH 1HPNR.RUHD&R/WG 0RGHO 02L 0 +RVW0RGHO1DPH (877\SH ,QWUDRUDO6FDQQHU &ODVVLILFDWLRQ 'LJLWDO7UDQVPLVVLRQ6\VWHP '76 )&&3DUW6SUHDG6SHFWUXP7UDQVPLWWHU '66 8QOLFHQVHG1DWLRQDO,QIRUPDWLRQ,QIUDVWUXFWXUH 81,, (*+]/RZ3RZHU,QGRRU&OLHQW ;' 'DWHRI7HVW $SULOa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est Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 2 of 149 5HYLVLRQ+LVWRU\ 5HY,VVXH'DWH5HYLVLRQV5HYLVHG%\ $XJXVW,QLWLDOLVVXH:RQKHH/HH Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 3 of 149 TABLE OF CONTENTS 1. INTRODUCTION 7(67)$&,/,7< $&&5(',7$7,21$1'/,67,1* 2. EUT INFORMATION & TEST CONDITIONS (87,1)250$7,21 2.1.1 Variants Covered By This Report(Model Distinction) .......................................................................... 8 23(5$7,21'85,1*7(67 2.2.1 Operating Environment ....................................................................................................................... 9 2.2.2 Table of test channels .......................................................................................................................... 9 2.2.3 Table of test power setting ............................................................................................................ 10 2.2.4 Antenna Information ......................................................................................................................... 11 2.2.5 Additional Information Related to Testing ........................................................................................... 11 6833257(48,30(17 0$;,0807$5*(732:(5$021*352'8&7,2181,76 6$57(67&216,'(5$7,21 6$57(67,1*(87&21),*85$7,21 $17(11$/2&$7,21 3. TEST METHODOLOGY 4. SAR & POWER DENSITY MEASUREMENT SYSTEM 6$50($685(0(176(783 0($685(0(176<67(0 4.2.1 SPEAG DASY8 System .................................................................................................................. 16 4.2.2 SAR Probe ....................................................................................................................................... 17 4.2.3 SAM Phantom .................................................................................................................................. 17 4.2.4 ELI Phantom ..........................................................…
Text truncated - open the document above for the full version.
Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 107 of 149 APPENDIX C. CALIBRATION REPORT OF THE PROBE Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 108 of 149 (;3UREH 61 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 109 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 110 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 111 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 112 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 113 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 114 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 115 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 116 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 117 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 118 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 119 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 120 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 121 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 122 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 123 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 124 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 125 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 126 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 127 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 128 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 129 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 130 of 149 APPENDIX D. CALIBRATION REPORT OF THE DIPOLE ANTENNA Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 131 of 149 'LSROH$QWHQQD*+] 61 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 132 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 133 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 134 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 135 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 136 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 137 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 138 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 139 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 140 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 141 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 142 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 143 of 149 'LSROH$QWHQQD*+] 61 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 144 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 145 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 146 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 147 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 148 of 149 Test Report No.: REP105217 FCC ID : 2A2QMMO3-I900M TRF-FCC&IC-SAR_Rev.0.1 Nemko Korea Co., Ltd. Page 149 of 149 (1'5(3257
Product Specification WIFI 6E FPCB Antenna (INNO-AFP-0404-L) Confidential Antenna Approval Sheet Supplier : INNO-LINK co.,LTD R&D Center : Inno Link Building, 970-4 Dangjeong-dong, Gunpo-si, Gyeonggi-do, 435-870, Korea Page 2 / 12 Description: WIFI 6E FPCB Antenna Specification No. INNO-AFP-0404-L Customer. MEDIT Rev. 1.0 Date Nov.11, 2024 품 명 WIFI 6E FPCB Antenna 모델명 / 대역 WIFI 6E FPCB Antenna (2.4GHz / 5GHz / 6GHz) 품 번 INNO-AFP-0404-L 고 객 코 드 고 객 명 MEDIT Peak Gain 2400 MHz ~ 2483.5 MHz 2.95 dBi 5150 MHz ~ 5250 MHz 2.70 dBi 5250 MHz ~ 5350 MHz 3.06 dBi 5470 MHz ~ 5725 MHz 2.60 dBi 5725 MHz ~ 5850 MHz 4.58 dBi 5925 MHz – 6425 MHz 4.79 dBi 6425 MHz – 6525 MHz 4.26 dBi 6525 MHz – 6870 MHz 4.11 dBi 6870 MHz – 7125 MHz 4.69 dBi 공 급 처 INNO-LINK INNO-LINK APPROVAL Classification DIRECTOR EXAMINATION APPROVAL RF MECHANICAL APPROVAL Classification DIRECTOR EXAMINATION APPROVAL RF MECHANICAL Page 3 / 12 Description: WIFI 6E FPCB Antenna Specification No. INNO-AFP-0404-L Customer. MEDIT Rev. 1.0 Date Nov.11, 2024 목 차 1 개정 이력 ........................................................................................................................................................................ 4 2 기술적 사항..................................................................................................................................................................... 5 2.1 전기적 특성 Specification .............................................................................................................................................5 2.2 전기적 특성 데이터 .......................................................................................................................................................5 2.2.1 정재파비 (V.S.W.R) ................................................................................................................................................5 2.2.2 방사 패턴......................................................................................................................................................................6 3. 시험 방법 ....................................................................................................................................................................... 8 3.1. VSWR ..............................................................................................................................................................................8 3.2. GAIN ................................................................................................................................................................................8 4. 기구적 사양............................................................................................................................................................. 10 4.1 기구 도면.......................................................................................................................................................................10 5. 관리 계획서........................................................…
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15E | 6.03 GHz - 6.99 GHz | 4.00 mW |