2A2QS-PCD002SMART BIRD FEEDER

9 10 1 2 3 Note: TF card is not included 4 TF Card Slot 5 The Batteries inside the camera are not fully charged according to the transportation safety regulation. Please fully charge the camera before using it. Please charge the batteries with provided Type C Port Cable (adapter not included) Note Please turn off the camera before charging The power light will be in solid red; and will turn to solid green when fully charged. It takes about 8 hours to fully charge your camera. After the Camera is turned on, press the "Reset" button twice in succession. It will prompt: "Please use the smart bird feeder to scan the QR code on the screen." 6 Birdock Birdock 7 Birdock Birdock 8 4. After the Camera is turned on, press the "Reset" button twice in succession. It will prompt: "Please use the smart bird feeder to scan the QR code on the screen." 3. Long Press the ON/OFF button for 2s to turn on the camera. Then the Status Light beside the button will be in flashing blue and the camera will prompt “ Welcome to use the smart bird feeder”. Continue to add 9 10 Cloud storage Birdock 11 12 13 14 Slide the camera through the opening of the assembled feeder as shown. 15 16 17 18 19 20 135 5200 8 21 ManufacturerPengchuangda (Shenzhen) Industry Co., Ltd. AddressNo. 14-1 Tongqing Road,Tongxin Community, Baolong Street,Longgang District,Shenzhen City,Guangdong, China FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. 22

Pengchuangda (Shenzhen) Industry Co., Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Pengchuangda (Shenzhen) Industry Co., Ltd. Address: No. 14-1 Tongqing Road,Tongxin Community,Baolong Street,Longgang District,Shenzhen City,Guangdong,China Product Name: Smart bird feeder FCC ID: 2A2QS-PCD002 Model(s): PCD001 PCD002 PCD003 PCD004 PCD005 PCD006 PCD007 PCD008 PCD009 PCD010 PCD011 PCD012 PCD013 PCD014 PCD015 PCD016 PCD017 PCD018 PCD019 PCD020 2.911(d)(5)(ii) Applicant filing We, [Pengchuangda (Shenzhen) Industry Co., Ltd.] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Jack Zheng Date: July 5, 2023 Title and Company name: General manager Pengchuangda (Shenzhen) Industry Co., Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Pengchuangda (Shenzhen) Industry Co., Ltd. 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Pengchuangda (Shenzhen) Industry Co., Ltd. Address: No. 14-1 Tongqing Road,Tongxin Community,Baolong Street,Longgang District,Shenzhen City,Guangdong,China Product Name: Smart bird feeder FCC ID: 2A2QS-PCD002 Model(s): PCD001 PCD002 PCD003 PCD004 PCD005 PCD006 PCD007 PCD008 PCD009 PCD010 PCD011 PCD012 PCD013 PCD014 PCD015 PCD016 PCD017 PCD018 PCD019 PCD020 2.911(d)(7) USA Designated Agent for Service of Process We, [Pengchuangda (Shenzhen) Industry Co., Ltd.] (“the applicant”) designate [JULI LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: JULI LLC Address: 2180 S Wineville Ave, Ontario CA 91761 Contact Name: Jet Li Telephone No: 9096573388 Email: [email protected] Applicant FRN Number: 0031197023 Company name: Pengchuangda (Shenzhen) Industry Co., Ltd. Address: No. 14-1 Tongqing Road,Tongxin Community,Baolong Street,Longgang District,Shenzhen City,Guangdong,China FCC Grantee Code: 2A2QS Contact Name: Jack Zheng Telephone No: 186 8218 3913 Pengchuangda (Shenzhen) Industry Co., Ltd. 2.911 (d)(7)USA Agent v1.2 Email: [email protected] Signature: Title: General manager Signature: Date: July 5,2023 Date: July 5,2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Declaration of difference I hereby declare that the following product models are only different in appearance color without any difference in function, internal structure and RF parameters:： Name of product：Smart bird feeder Model No： PCD001 Series model No： PCD002 PCD003 PCD004 PCD005 PCD006 PCD007 PCD008 PCD009 PCD010 PCD011 PCD012 PCD013 PCD014 PCD015 PCD016 PCD017 PCD018 PCD019 PCD020 MANUFACTURER or AUTHORISED REPRESENTATIVE: −Address: Manufacture name： Pengchuangda (Shenzhen) Industry Co., Ltd. Manufacture address：No. 14-1 Tongqing Road,Tongxin Community,Baolong Street, Longgang District,Shenzhen City, Guangdong,China This declaration is issued under the sole responsibility of the manufacturer and, if applicable, his authorised representative. Point of contact: Jack Zheng, +86-18682183913 (Name, telephone and fax number) Shenzhen, July 5, 2023 (Place, date of issue) (Signature) Jack Zheng (General manager) (Name and title in block letters)

Internal Photos of the EUT Product Name: SMART BIRD FEEDER Product Model: PCD001 This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Disagreement against this test report, if any, should be filed with to our company in writing within 15 days of receiving the report. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. AJT TESTING SERVICES LIMITED Add: 1-2/F., No.1, Wenhua South Road, Chenghua Industrial Zone, Chenghai District, Shantou, Guangdong, China Tel: 86-754-85860999 Fax: 86-754-86984098 Website: www.ajtesting.com Email: [email protected] Page 1 of 4 View 1 View 2 Internal Photos of the EUT Product Name: SMART BIRD FEEDER Product Model: PCD001 This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Disagreement against this test report, if any, should be filed with to our company in writing within 15 days of receiving the report. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. AJT TESTING SERVICES LIMITED Add: 1-2/F., No.1, Wenhua South Road, Chenghua Industrial Zone, Chenghai District, Shantou, Guangdong, China Tel: 86-754-85860999 Fax: 86-754-86984098 Website: www.ajtesting.com Email: [email protected] Page 2 of 4 View 3 View 4 Internal Photos of the EUT Product Name: SMART BIRD FEEDER Product Model: PCD001 This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Disagreement against this test report, if any, should be filed with to our company in writing within 15 days of receiving the report. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. AJT TESTING SERVICES LIMITED Add: 1-2/F., No.1, Wenhua South Road, Chenghua Industrial Zone, Chenghai District, Shantou, Guangdong, China Tel: 86-754-85860999 Fax: 86-754-86984098 Website: www.ajtesting.com Email: [email protected] Page 3 of 4 View 5 View 6 Internal Photos of the EUT Product Name: SMART BIRD FEEDER Product Model: PCD001 This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Disagreement against this test report, if any, should be filed with to our company in writing within 15 days of receiving the report. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. AJT TESTING SERVICES LIMITED Add: 1-2/F., No.1, Wenhua South Road, Chenghua Industrial Zone, Chenghai District, Shantou, Guangdong, China Tel: 86-754-85860999 Fax: 86-754-86984098 Website: www.ajtesting.com Email: [email protected] Page 4 of 4 View 7 View 8

Test Report No.: AJT230703087E-2 This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Disagreement against this test report, if any, should be filed with to our company in writing within 15 days of receiving the report. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. AJT TESTING SERVICES LIMITED Add: 1-2/F., No.1, Wenhua South Road, Chenghua Industrial Zone, Chenghai District, Shantou, Guangdong, China Tel: 86-754-85860999 Fax: 86-754-86984098 Website: www.ajtesting.com Email: [email protected] Page 1 of 6 Applicant Name : PENGCHUANGDA (SHENZHEN)INDUSTRY CO., LTD. Applicant Address : NO.14-1 TONGQING ROAD, TONGXIN COMMUNITY, BAOLONG STREET, LONGGANG DISTRICT, SHENZHEN CITY, GUANGDONG, CHINA Manufacturer : PENGCHUANGDA (SHENZHEN)INDUSTRY CO., LTD. Manufacturer Address : NO.14-1 TONGQING ROAD, TONGXIN COMMUNITY, BAOLONG STREET, LONGGANG DISTRICT, SHENZHEN CITY, GUANGDONG, CHINA The following samples were submitted and identified by/on behalf of the client as: Sample Description : SMART BIRD FEEDER Model No. : PCD001 Additional Model : PCD002, PCD003, PCD004, PCD005, PCD006, PCD007, PCD008, PCD009, PCD010, PCD011, PCD012, PCD013, PCD014, PCD015, PCD016, PCD017, PCD018, PCD019, PCD020 Sample Received Date : 03 July, 2023 Testing Completed Date : 20 July, 2023 Tests conducted: For compliance with application, refer to attached page(s) for details. Assess standard used: Conclusion FCC Part 1.1307 PASS Tested by: Reviewed by: Approved by: Position: Technical Supervisor Date: 2023-07-20 Test Report No.: AJT230703087E-2 This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Disagreement against this test report, if any, should be filed with to our company in writing within 15 days of receiving the report. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. AJT TESTING SERVICES LIMITED Add: 1-2/F., No.1, Wenhua South Road, Chenghua Industrial Zone, Chenghai District, Shantou, Guangdong, China Tel: 86-754-85860999 Fax: 86-754-86984098 Website: www.ajtesting.com Email: [email protected] Page 2 of 6 TABLE OF CONTENTS 1 Test Standards ..................................................................................................................................................3 2 Summary ...........................................................................................................................................................3 2.1 General Remarks ............................................................................................................................................3 3 General Information ...........................................................................................................................................4 3.1 General Description of E.U.T. .........................................................................................................................4 3.2 Details of E.U.T. ..............................................................................................................................................4 4 Test Summary ...................................................................................................................................................4 5 RF Exposure ......................................................................................................................................................5 5.1 Requirements .................................................................................................................................................5 5.2 The procedures / limit .....................................................................................................................................5 5.3 MPE Calculation Method ................................................................................................................................6 5.4 Result: Compliance.........................................................................................................................................6 Test Report No.: AJT230703087E-2 This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Disagreement against this test report, if any, should be filed with to our company in writing within 15 days of receiving the report. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. AJT TESTING SERVICES LIMITED Add: 1-2/F., No.1, Wenhua South Road, Chenghua Industrial Zone, Chenghai District, Shantou, Guangdong, China Tel: 86-754-85860999 Fax: 86-754-86984098 Website: www.ajtesting.com Email: [email protected] Page 3 of 6 1 Test Standards The tests were performed according to following standards: FCC Part 1.1307: Actions that may have a significant environmental effect, for which Environmental Assessments (EAs) must be prepared. FCC Part 2.1091 & KDB 447498 D01 General RF Exposure Guidance v06 2 Summary 2.1 General Remarks Date of receipt o…

Text truncated - open the document above for the full version.

Test Report No.: AJT230703087E-1 This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Disagreement against this test report, if any, should be filed with to our company in writing within 15 days of receiving the report. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. AJT TESTING SERVICES LIMITED Add: 1-2/F., No.1, Wenhua South Road, Chenghua Industrial Zone, Chenghai District, Shantou, Guangdong, China Tel: 86-754-85860999 Fax: 86-754-86984098 Website: www.ajtesting.com Email: [email protected] Page 1 of 79 Applicant Name : PENGCHUANGDA (SHENZHEN) INDUSTRY CO., LTD. Applicant Address : NO.14-1 TONGQING ROAD, TONGXIN COMMUNITY, BAOLONG STREET, LONGGANG DISTRICT, SHENZHEN CITY, GUANGDONG, CHINA Manufacturer : PENGCHUANGDA (SHENZHEN) INDUSTRY CO., LTD. Manufacturer Address : NO.14-1 TONGQING ROAD, TONGXIN COMMUNITY, BAOLONG STREET, LONGGANG DISTRICT, SHENZHEN CITY, GUANGDONG, CHINA The following samples were submitted and identified by/on behalf of the client as: Sample Description : SMART BIRD FEEDER Model No. : PCD001 Additional Model : PCD002, PCD003, PCD004, PCD005, PCD006, PCD007, PCD008, PCD009, PCD010, PCD011, PCD012, PCD013, PCD014, PCD015, PCD016, PCD017, PCD018, PCD019, PCD020 Sample Received Date : 03 July, 2023 Testing Completed Date : 20 July, 2023 Tests conducted: For compliance with application, refer to attached page(s) for details. Assess standard used: Conclusion FCC CFR47 Part 15, Subpart C, Section 15.247 PASS Tested by: Reviewed by: Approved by: Position: Technical Supervisor Date: 2023-07-21 Test Report No.: AJT230703087E-1 This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Disagreement against this test report, if any, should be filed with to our company in writing within 15 days of receiving the report. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. AJT TESTING SERVICES LIMITED Add: 1-2/F., No.1, Wenhua South Road, Chenghua Industrial Zone, Chenghai District, Shantou, Guangdong, China Tel: 86-754-85860999 Fax: 86-754-86984098 Website: www.ajtesting.com Email: [email protected] Page 2 of 79 TABLE OF CONTENTS 1 Test Standards .................................................................................................................................................. 3 2 Summary ........................................................................................................................................................... 3 2.1 General Remarks ............................................................................................................................................ 3 3 General Information ........................................................................................................................................... 3 3.1 General Description of E.U.T. ......................................................................................................................... 3 3.2 Details of E.U.T. .............................................................................................................................................. 4 3.3 Channel List .................................................................................................................................................... 4 3.4 Test mode ....................................................................................................................................................... 5 4 Test Summary ................................................................................................................................................... 6 5 Equipment Used during Test ............................................................................................................................. 7 5.2 Description of Support Units ........................................................................................................................... 7 5.3 Measurement Uncertainty .............................................................................................................................. 8 6 Conducted Emission .......................................................................................................................................... 9 6.1 E.U.T. Operation ............................................................................................................................................. 9 6.2 EUT Setup .................................................................................................................................................... 10 6.3 Measurement Description ............................................................................................................................. 10 6.4 Conducted Emission Test Result ................................................................................................................. 10 7 Radiated Emissions ......................................................................................................................................... 13 7.1 EUT Operation .............................................................................................................................................. 13 7.2 Test Setup ..............................................…

Text truncated - open the document above for the full version.

SPECIFICATION ShenZhenTianDaCommunicationCo,LTD P1Antenna ProductSpecification CustomerKesidaFrequencyband 2400-2500MHz ProjectnameP1 EditionA ItemnumberKS-P1-00-WI-A ColourBlack RFdesignWangxinchuang Structuraldesign Zhouluhong Date 2023.07.12 Customerconfirmation： Whethertheassemblymeetsyourrequirements ：□ OK □ NG 深圳市天达通信有限公司 ShenZhenTianDaCommunicationCO.,LTD. 深圳市宝安区福海街道桥头社区金港科技园A栋302 302BuildingA,JinGangscienceandTechnology Park,Qiaotoucommunity,FuhaiStreet,Bao'an District,Shenzhen ConfidentialInformation Page 2 Catalog 一、WIFIantenna...................................................................................................................3 1 、 Specifications..................................................................................................................3 1.1 、 Electricalspecifications...............................................................................................3 1.1.1 、 Electricalperformanceindex....................................................................................3 1.1.2 、 Matchingcircuitdiagram..........................................................................................3 1.2 、 Testing..........................................................................................................................4 1.2.1 、 Passivetestdata........................................................................................................4 1.2.1.1 、 Standingwavepatternofantenna........................................................................4 1.2.1.2 、 Antennagainefficiency.........................................................................................4 1.2.1.3 、 Antennapattern......................................................................................................5 二、Structuralspecifications................................................................................................6 2.1 、 Antennacomposition...................................................................................................6 2.2 、 Drawings.....................................................................................................................7 ConfidentialInformation Page 3 一、WIFIAntenna 1、Specifications Thespecificationmainlyprovidestheteststatusofelectricalandstructural performanceparametersofWIFIantennainP1project。Thepicturebelowshowsthe WIFIantennadesignedbyTianda. 1.1、Electricalspecifications 1.1.1、Electricalperformanceindex Theoperatingfrequencybandoftheantenna2400MHz—2500MHz，Thefollowing istheelectricalperformanceindexoftheantennadesignedandproducedbyTianda. WIFI 频段频率（MHz） VSWR 2.4G2400~2500 ≤2.0 1.1.2、Matchingcircuitdiagram ThematchingcircuitofWIFIantennaisaseries0ohmresistor. ConfidentialInformation Page 4 1.2、Testing 1.2.1、Passivetest 1.2.1.1、VSWR 1.2.1.2、AntennaGainandEfficiency ConfidentialInformation Page 5 1.2.1.3、Antennapattern ConfidentialInformation Page 6 二、Structuralspecifications 2.1、Antennacomposition WIFIantennaismainlycomposedofFPC+Cable. ConfidentialInformation Page 7 2.2、Drawings

Test Photos of the EUT Product Name: SMART BIRD FEEDER Product Model: PCD001 This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Disagreement against this test report, if any, should be filed with to our company in writing within 15 days of receiving the report. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. AJT TESTING SERVICES LIMITED Add: 1-2/F., No.1, Wenhua South Road, Chenghua Industrial Zone, Chenghai District, Shantou, Guangdong, China Tel: 86-754-85860999 Fax: 86-754-86984098 Website: www.ajtesting.com Email: [email protected] Page 1 of 3 Conducted Emission Test Photos of the EUT Product Name: SMART BIRD FEEDER Product Model: PCD001 This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Disagreement against this test report, if any, should be filed with to our company in writing within 15 days of receiving the report. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. AJT TESTING SERVICES LIMITED Add: 1-2/F., No.1, Wenhua South Road, Chenghua Industrial Zone, Chenghai District, Shantou, Guangdong, China Tel: 86-754-85860999 Fax: 86-754-86984098 Website: www.ajtesting.com Email: [email protected] Page 2 of 3 Radiated Emission TX below 30MHz TX 30MHz~1GHz Test Photos of the EUT Product Name: SMART BIRD FEEDER Product Model: PCD001 This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Disagreement against this test report, if any, should be filed with to our company in writing within 15 days of receiving the report. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. AJ…

Text truncated - open the document above for the full version.