2A2TA-IT-701ATablet pc

2024/9/12 11:11d958bb820de44483d33d372063b0d0f.jpg (407 KB,1700*2338) 1/1 file:///C:/Users/Administrator/Desktop/d958bb820de44483d33d372063b0d0f.jpg1/1

2024/9/12 11:3103aea83275694ae14af8085f1d2d6ce.jpg (441 KB,1700*2338) 1/2 file:///C:/Users/Administrator/Desktop/03aea83275694ae14af8085f1d2d6ce.jpg1/1

2024/9/12 11:144c379359e1e8eaf8d06635deef663f9.jpg (470 KB,1700*2338) 2/5 file:///C:/Users/Administrator/Desktop/4c379359e1e8eaf8d06635deef663f9.jpg1/1

2024/9/12 11:2567359d6d99b9fb9a6eec1469ccc5afb.jpg (521 KB,1700*2338) 3/3 file:///C:/Users/Administrator/Desktop/67359d6d99b9fb9a6eec1469ccc5afb.jpg1/1

2024/9/12 11:265c33bd839ba3d3ad173a12d8531daf0.jpg (447 KB,1700*2338) 2/3 file:///C:/Users/Administrator/Desktop/5c33bd839ba3d3ad173a12d8531daf0.jpg1/1

FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT

FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Appendix IID Label Tablet pc FCC ID: 2A2TA-IT-701A Model: IT-701A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Appendix II ID Label Location

FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 9 Internal of EUT Photo 10 Internal of EUT FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Photo 11 Internal of EUT Photo 12 Appearance of PCB BT/2.4G Wi-Fi Antenna FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Photo 13 Appearance of PCB Photo 14 Appearance of PCB FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Photo 22 15 Battery parameters

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202408-0001-13 Page: 1 of 4 TB-RF-074-1.0 1 A/F., Building.6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao’an, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Exposure Evaluation FCC ID: 2A2TA-IT-701A 1. Client Information Applicant : SMARTCN LIMITED Address : 2-3Floor, Bldg 8, Yisong Industrial Park, No. 9 Jie Jiabao Rd, Shuitian Community, Shiyan, Shenzhen, China Manufacturer : SMARTCN LIMITED Address : 2-3Floor, Bldg 8, Yisong Industrial Park, No. 9 Jie Jiabao Rd, Shuitian Community, Shiyan, Shenzhen, China 2. General Description of EUT EUT Name : Tablet pc Model(s) No. : IT-701A, IT-701B, IT-701C, IT-701D, IT-701E Model Difference : All these models are identical in the same PCB, layout and electrical circuit, the only difference is different customers, different model name. Product Description : Operation Frequency: Bluetooth V4.2: 2402MHz~2480MHz 2.4G Wi-Fi: 2412MHz~2462MHz Antenna Gain: 1.42dBi PIFA Antenna Power Rating : Input: DC 5V/2A Li-ion Polymer Battery : DC 3.8V by 3500mAh Rechargeable Li-ion battery Software Version : Android 11 Hardware Version : SQ8T-7731E-W-V1.0 Remark: (1) The antenna gain provided by the applicant, the verified for the RF conduction test provided by TOBY test lab. (2) The above antenna information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications, the laboratory shall not be held responsible. Note: More test information about the EUT please refer the RF Test Report. Report No.: TBR-C-202408-0001-13 Page: 2 of 4 TB-RF-074-1.0 SAR Test Exclusion Calculations 1. FCC: According to KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06. (1) Clause 4.3: General SAR test reduction and exclusion guidance Sub clause 4.31: Standalone SAR test exclusion considerations 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6GHz at test separation distance≤5 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤3.0 for 1-g SAR [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤7.5.0 for 10-g SAR 2. Summary simultaneous transmission for SAR Exclusion The SAR exemption limits outlined in clause 4.3.2(b) of KDB 447498 have been derived based on an approximate SAR value of 0.4 W/kg using half-wave dipole antennas Footnote 1. As such, when simultaneous transmitter SAR evaluations include transmitters that have been exempt from routine SAR evaluation, the SAR must be estimating based on the ratio between the maximum tune-up tolerance limit of the transmitter that has been exempt and the exemption limit at the specific distance and frequency for that transmitter. This ratio must be multiplied by 0.4 W/kg(2.0 W/kg for controlled use and 1.0 W/kg for limb worn devices) in order to calculate the estimated SAR level. The estimate SAR value is calculated based the following equation: (maximum power level including tune-up tolerance for transmitter A / maximum power level of exemption at the same frequency and distance) * 0.4W/kg The [∑ of (the highest measured or estimated SAR for each standalone antenna configuration, adjusted for maximum tune-up tolerance) / 1.6 W/kg] + [∑ of MPE ratios] is ≤ 1.0. The SAR to peak location separation ratios of all simultaneously transmitting antenna pairs operating in portable device exposure conditions are all ≤ 0.04, and the [∑ of MPE ratios] is ≤ 1.0. Report No.: TBR-C-202408-0001-13 Page: 3 of 4 TB-RF-074-1.0 3. Calculation: Test separation: 5mm Bluetooth (GFSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 3.395 3±1 4 2.512 0.779 3.0 2.441 3.898 4±1 5 3.162 0.988 3.0 2.480 3.696 4±1 5 3.162 0.996 3.0 Bluetooth (Pi/4-DQPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 2.527 3±1 4 2.512 0.779 3.0 2.441 3.182 3±1 4 2.512 0.785 3.0 2.480 3.051 3±1 4 2.512 0.791 3.0 Bluetooth (8-DPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 3.257 3±1 4 2.512 0.779 3.0 2.441 4.011 4±1 5 3.162 0.988 3.0 2.480 3.731 4±1 5 3.162 0.996 3.0 2.4 G Wi-Fi 802.11b Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.412 7.33 7±1 8 6.310 1.960 3.0 2.437 7.66 8±1 9 7.943 2.480 3.0 2.462 7.13 7±1 8 6.310 1.980 3.0 2.4 G Wi-Fi 802.11g Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.412 7.19 7±1 8 6.310 1.960 3.0 2.437 7.62 8±1 9 7.943 2.480 3.0 2.462 6.89 7±1 8 6.310 1.980 3.0 2.4 G Wi-Fi 802.11n20 Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.412 6.75 7±1 8 6.310 1.960 3.0 2.437 6.94 7±1 8 6.310 1.970 3.0 2.462 6.65 7±1 8 6.310 1.980 3.0 Report No.: TBR-C-202408-0001-13 Page: 4 of 4 TB-RF-074-1.0 Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06. -----END OF REPORT-----

第 1 页 共 10 页 Antenna Sample Confirmation From Vendor Name ShenZhen Aihui Technology Co. ，Ltd Customer Name SMARTCN LIMITED Sample Name IT-701A Part Number FPC Sp ec ification Wire length 80mm, wire diameter 0.81 (black) Inspection Item Performance Total Appearance structure Others Inspection Result Remark QA Audit Engineer Audi t Sales Confirm The following are filled by Customer Customer Evaluation Signation/ Chapter by Customer date:2022-12-16 Antenna Test Report ShenZhen Aihui Technology Co.，Ltd 第 2 页 共 10 页 Test by：ShenZhen Aihui Technology Co.，Ltd Material FPC+coaxial line Antenna Type PIFA Polarization mode Linear Application Band 2400Mhz-2500Mhz VSWR ≤2 Power Max：2W Impedance 50Ω dBi ≥1dBi Test Equipment HPE5071C、Shielding Room、3D automatic turntable Antenna Description:： 1. Grounding processing and picture description: no 2. Need to change the motherboard to match: no Test voltage: 3.6V, check the antenna contact is good before testing. The RF cable of the integrated tester is kept in a natural state and can not be curled. Specification:test the specified power level, all indicators must conform to the specifications. 第 3 页 共 10 页 1. Project images 2. Testing tools 3. Antenna matching circuit 4. S11 testing 4.0 S11 Test Method Description 5. Passive efficiency and gain of antennas 6. Darkroom testing equipment and data 6.0 Testing Equipment 6.1 Active test data 7. Antenna assembly diagram 8. Antenna environment processing 9. Antenna mass production indicators 10. Structural drawings 第 4 页 共 10 页 1. Project images Explanation: The customer's final verification of antenna performance prototype should be retained by our company for at least one year to facilitate analysis and resolution of abnormal situations in antenna production, ensuring the quality of antenna shipment 2. Testing tools Purpose: To test the passive parameters of the antenna as accurately as possible. Production method: The mobile phone tool uses a 50 ohm coaxial cable, with one end connected to the test point at the back end of the matching circuit (RF test hole front end) of the mobile phone motherboard, and the other end connected to an SMA connector. The schematic diagram is as follows: 3、Antenna ma tching circuit Modify E01 E02 E03 No No No Note: There are no modifications made to the matching. 第 5 页 共 10 页 4. S11 testing 4.0 S11 Test Method Description Test equipment: Network analyzer (E5071C) Test method: Use a 50 ohm CABLE cable to export from the testing port of the instrument, calibrate it with a calibration piece, and connect it to the SMA connector of the mobile tool. Record the corresponding return loss and standing wave ratio of the relevant frequency points. The test schematic is as follows： 5. Darkroom testing equipment and data 6.0 Testing Equipment Test system: shielded darkroom Test environment: temperature 22 °C± 3 °C, humidity 50% ± 15% Test equipment: When testing passive data, use a network analyzer AgilentE5071C When testing active data, use a comprehensive tester CMW500 第 6 页 共 10 页 6.Passive antenna test data Test data: WIFI 2.4G Freq(MHz) Efficiency (%) Gain (dBi) 2400 58.62 1.06 2410 57.41 1.00 2420 56.55 1.05 2430 57.21 1.42 2440 54.69 1.26 2450 55.25 1.33 2460 54.30 1.40 2470 51.09 1.26 2480 52.30 1.04 第 7 页 共 10 页 Test data： BT 2400Mhz -2500Mhz Freq(MHz) Efficiency (%) Gain (dBi) 2400 58.62 1.06 2410 57.41 1.00 2420 56.55 1.05 2430 57.21 1.42 2440 54.69 1.26 2450 55.25 1.33 2460 54.30 1.40 2470 51.09 1.26 2480 52.30 1.04 2490 54.33 1.03 2500 52.65 1.04 第 8 页 共 10 页 6.2 ANT VSWR 第 9 页 共 10 页 7、Antenna mass production indicators When producing antennas, the standing wave ratio is used as the production testing standard. Based on the differences in the project itself, the following standards are provided: Frequency Mass production standards 2400 MHZ -2500MHZ 5100MHZ-5850MHZ VSWR<VSWR+0.5 8. Structural drawings 第 10 页 共 10 页

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0001-16 Page: 1 of 69 FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 RF Test Data for Bluetooth LE (Conducted Measurements) General Description of EUT Product Name: Tablet pc Test Model: IT-701A Sample ID: 202408-0001-10-2# Environmental Conditions Temperature: 22.0°C-25°C Relative Humidity: 43%-55% Test Voltage: DC 3.8V Test Engineer: ZKN Zhou Note: For a more detailed features description, please refer to the report TBR-C-202408-0001-16 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0001-16 Page: 2 of 69 FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Contents 1.Duty Cycle ............................................................................................................................................................................................ 3 2. Maximum Conducted Output Power ................................................................................................................................................. 9 3. -20dB Bandwidth .............................................................................................................................................................................. 15 4. Occupied Channel Bandwidth ......................................................................................................................................................... 21 5. Band Edge ........................................................................................................................................................................................ 27 6. Band Edge(Hopping) ........................................................................................................................................................................ 34 7. Conducted RF Spurious Emission .................................................................................................................................................. 41 8. Restrict Band .................................................................................................................................................................................... 51 9. Carrier Frequencies Separation....................................................................................................................................................... 58 10. Number of Hopping Channel ......................................................................................................................................................... 61 11. Dwell Time ....................................................................................................................................................................................... 64 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0001-16 Page: 3 of 69 FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 1.Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT 1-DH1 2402 Ant1 31.2 5.06 2.56 NVNT 1-DH1 2441 Ant1 31.2 5.06 2.56 NVNT 1-DH1 2480 Ant1 31.2 5.06 2.56 NVNT 2-DH1 2402 Ant1 31.2 5.06 2.56 NVNT 2-DH1 2441 Ant1 31.2 5.06 2.56 NVNT 2-DH1 2480 Ant1 31.2 5.06 2.56 NVNT 3-DH1 2402 Ant1 24.8 6.06 3.23 NVNT 3-DH1 2441 Ant1 24 6.2 3.33 NVNT 3-DH1 2480 Ant1 24 6.2 3.33 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0001-16 Page: 4 of 69 FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Test Graphs Duty Cycle NVNT 1-DH1 2402MHz Ant1 Duty Cycle NVNT 1-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0001-16 Page: 5 of 69 FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Duty Cycle NVNT 1-DH1 2480MHz Ant1 Duty Cycle NVNT 2-DH1 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0001-16 Page: 6 of 69 FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Duty Cycle NVNT 2-DH1 2441MHz Ant1 Duty Cycle NVNT 2-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0001-16 Page: 7 of 69 FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2402MHz Ant1 Duty Cycle NVNT 3-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0001-16 Page: 8 of 69 FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0001-16 Page: 9 of 69 FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT 1-DH1 2402 Ant1 3.395 21 Pass NVNT 1-DH1 2441 Ant1 3.898 21 Pass NVNT 1-DH1 2480 Ant1 3.696 21 Pass NVNT 2-DH1 2402 Ant1 2.527 21 Pass NVNT 2-DH1 2441 Ant1 3.182 21 Pass NVNT 2-DH1 2480 Ant1 3.051 21 Pass NVNT 3-DH1 2402 Ant1 3.257 21 Pass NVNT 3-DH1 2441 Ant1 4.011 21 Pass NVNT 3-DH1 2480 Ant1 3…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202408-0001-16 Page: 1 of 58 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID: 2A2TA-IT-701A Original Grant Report No. : TBR-C-202408-0001-16 Applicant : SMARTCN LIMITED Equipment Under Test (EUT) EUT Name : Tablet pc Model No. : IT-701A Series Model No. : IT-701B, IT-701C, IT-701D, IT-701E Brand Name : ATMPC Sample ID : 202408-0001-10-1# & 202408-0001-10-2# Receipt Date : 2024-08-19 Test Date : 2024-08-19 to 2024-09-10 Issue Date : 2024-09-11 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Tested By : Jolin Lee Reviewed By : Camille Li Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202408-0001-16 Page: 2 of 58 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 6 1.1 Client Information ................................................................................................................. 6 1.2 General Description of EUT (Equipment Under Test) ................................................... 6 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 8 1.4 Description of Support Units .............................................................................................. 8 1.6 Description of Test Software Setting .............................................................................. 10 1.7 Measurement Uncertainty ................................................................................................ 10 1.8 Test Facility ......................................................................................................................... 11 2. TEST SUMMARY ..................................................................................................................... 12 3. TEST SOFTWARE ................................................................................................................... 12 4. TEST EQUIPMENT AND TEST SITE ................................................................................... 13 5. CONDUCTED EMISSION ....................................................................................................... 15 5.1 Test Standard and Limit .................................................................................................... 15 5.2 Test Setup ........................................................................................................................... 15 5.3 Test Procedure ................................................................................................................... 15 5.4 Deviation From Test Standard ......................................................................................... 16 5.5 EUT Operating Mode ........................................................................................................ 16 5.6 Test Data ............................................................................................................................. 16 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 17 6.1 Test Standard and Limit .................................................................................................... 17 6.2 Test Setup ........................................................................................................................... 18 6.3 Test Procedure ................................................................................................................... 19 6.4 Deviation From Test Standard ......................................................................................... 21 6.5 EUT Operating Mode ........................................................................................................ 21 6.6 Test Data ............................................................................................................................. 21 7. EMISSIONS IN RESTRICTED BANDS ............................................................................... 22 7.1 Test Standard and Limit .................................................................................................... 22 7.2 Test Setup ........................................................................................................................... 22 7.3 Test Procedure ................................................................................................................... 23 7.4 Deviation From Test Standard ......................................................................................... 25 7.5 EUT Operating Mode ........................................................................................................ 25 Report No.: TBR-C-202408-0001-16 Page: 3 of 58 TB-RF-074-1.0 7.6 Test Data ............................................................................................................................. 25 8. 99% OCCUPIED AND 20DB BANDWIDTH ........................................................................ 26 8.1 Test Standard and Limit .................................................................................................... 26 8.2 Test Setup ..........................................................................…

Text truncated - open the document above for the full version.

FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Appendix V EUT Test Photographs Photo of Setup for Radiated Emission (Below 1 GHz) Photo of Setup for Radiated Emission (Above 1 GHz) FCC ID: 2A2TA-IT-701A TB-RF-074-1.0 Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for Conducted Emission -----END OF REPORT-----