2A2TT-HJ675001RC TOYS

User 's manual 6+ Ages/Edades HJ675002 901 pcs/pzs 2 FORMS Hornet sports car App control Download the application of this product, turn on Bluetooth, to control the robot to move forward, backward and rotate. Remote control HJ675002 The packaging has to be kept since it contains important information. SPECIFICATIONS COLOURS AND CONTENTS MAY VARY FROM ILLUSTRATIONS MANUFACTURER: SHANTOU CITY CHENGHAI AREA HUADA TOY CO.,LTD. ADDRESS: GUANGFENG INDUSTRIAL PARK, DENGFENG ROAD, GUANGYI STREET, CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG, CHINA DESCRIPTION OF REMOTE CONTROL AND MAIN BATTERY BATTERY REPLACEMENT AND CHARGING STEPS Use a Phillips screwdriver to loosen the screws on the remote control counterclockwise and open the battery cover; insert 2 new 1.5V AAA non-rechargeable batteries according to the correct positive and negative poles (not delivered, need to be purchased separately). Product uses a USB charging cable to charge. When the speed slows down or cannot operate normally, please replace the remote control battery or charge the product. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Label Size： 4cm x 1 cm

FCC ID: 2A2TT-HJ675001 RF Exposure Evaluation According to KDB 447498 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f (GHz) ] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f (GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, For 2.4G Max Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit 0.241.0568 2409 5 0.5 3.0 So a SAR test is not required

Global United Technology Services Co., Ltd. Report No.: GTS202105000278F01 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 39 TEST REPORT Applicant: SHANTOUSHI CHENGHAIQU HENGJINLIANMAO DIANZISHANGWU CO., LTD Address of Applicant: 4th Floor, NO.8.1, Nanhuzaipian Industrial Zone, Chengjiang Road, Longtian, Guangyi Street, Chenghai,District Shantou City,Guangdong Province, China Manufacturer: SHANTOUSHI CHENGHAIQU HENGJINLIANMAO DIANZISHANGWU CO., LTD Address of Manufacturer: 4th Floor, NO.8.1, Nanhuzaipian Industrial Zone, Chengjiang Road, Longtian, Guangyi Street, Chenghai,District Shantou City,Guangdong Province, China Equipment Under Test (EUT) Product Name: RC TOYS Model No.: HJ-675001PL, HJ-675002PL, HJ- 675003PL, HJ- 675004PL, HJ- 675005PL FCC ID: 2A2TT-HJ675001 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: May 28, 2021 Date of Test: May 28, 2021-October 11, 2021 Date of report issued: October 11, 2021 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS202105000278F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 39 2 Version Version No. Date Description 00 October 11, 2021 Original Prepared By: Date: October 11, 2021 Project Engineer Check By: Date: October 11, 2021 Reviewer Report No.: GTS202105000278F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 39 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION ...................................................................................................................................................2 3 CONTENTS ...............................................................................................................................................3 4 TEST SUMMARY ......................................................................................................................................4 5 GENERAL INFORMATION .......................................................................................................................5 5.1 GENERAL DESCRIPTION OF EUT ..........................................................................................................5 5.2 TEST MODE .........................................................................................................................................7 5.3 DESCRIPTION OF SUPPORT UNITS ........................................................................................................7 5.4 DEVIATION FROM STANDARDS ..............................................................................................................7 5.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................7 5.6 TEST FACILITY ....................................................................................................................................7 5.7 TEST LOCATION ..................................................................................................................................7 5.8 ADDITIONAL INSTRUCTIONS ..................................................................................................................7 6 TEST INSTRUMENTS LIST ......................................................................................................................8 7 TEST RESULTS AND MEASUREMENT DATA .....................................................................................10 7.1 ANTENNA REQUIREMENT ....................................................................................................................10 7.2 CONDUCTED OUTPUT POWER ............................................................................................................11 7.3 CHANNEL BANDWIDTH .......................................................................................................................13 7.4 POWER SPECTRAL DENSITY ..............................................................................................................15 7.5 BAND EDGES .....................................................................................................................................17 7.5.1 Conducted Emission Method ......................................................................................................17 7.5.2 Radiated Emission Method .........................................................................................................18 7.6 SPURIOUS EMISSION .........................................................................................................................23 7.6.1 Conducted Emission Method ......................................................................................................23 7.6.2 Radiated Emission Method .........................................................................................................25 8 TEST SETUP PHOTO .............................................................................................................................39 9 EUT CONSTRUCTIONAL DETAILS ...................................................................................…

Text truncated - open the document above for the full version.

Radiated Emission