2A2X2-T621Walkie Talkie

2.Press the [ PTT ] button to save the selection, or press [ MENU / ] button to enter the next function setting. 1.Press the [ MENU / ] button once, Choose [ ▲ ] or To select a channel: [ ▼ ] to the required channel. FCC Warning 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation . This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Absorption Rate (SAR) information: This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR body limit of USA (FCC) is 8.0W/kg averaged over one gram of tissue. The SAR face limit of USA (FCC) is 0.4 W/kg averaged over ten gram of tissue.This device was tested for typical body-worn operations with the back of the device kept 0mm from the body and 25mm in front of face. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a appropriate separation distance between the user's body and the back of the device. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Use only the supplied or an approved antenna.

HuizhouBeijiaElectronicTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 [2026-06-02] U.S.AgentDesignation [HuizhouBeijiaElectronicTechnologyCo.,Ltd.]acknowledgestheirconsentforthefollowingcontactlocated intheUnitedStatestoactastheiragentforserviceofprocessfortheequipmentforwhichauthorizationissought (FCCID:2A2X2-T621): NameandcompanyofU.S.agent:[GLOCERTSTECHNOLOGYINC] PhysicalU.S.addressofagent:[19784SUNKISSEDRIDGEDR,RIVERSIDE,CA92507] FRNofU.S.agent:[0036339737] EmailaddressofU.S.agent:[[email protected]] TelephoneofU.S.agent:(626)588-8039 [GLOCERTSTECHNOLOGYINC]acknowledgestheirobligationtoacceptserviceofprocessonbehalfof [HuizhouBeijiaElectronicTechnologyCo.,Ltd.]. [HuizhouBeijiaElectronicTechnologyCo.,Ltd.]withtheFRN[0031293939]acceptsitsobligationto maintainanagentforserviceofprocessintheUnitedStatesfornolessthan1yearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S.,orthe conclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheveris later. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirementslistedunder§ 2.911(d)(7). TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB 986446D01. Sincerely, SignatureSignature [Zhuxiaoya][HuiyingFan] [QualitySupervisor][Director] [HuizhouBeijiaElectronicTechnology Co.,Ltd.] [GLOCERTSTECHNOLOGYINC]

Rev1/26/2023 HuizhouBeijiaElectronicTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:06-02-2026 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2A2X2-T621 HuizhouBeijiaElectronicTechnologyCo.,Ltd.certifiesthattheequipmentforwhichauthorizationis soughtisnot“covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuantto section2.903oftheFCCrules. HuizhouBeijiaElectronicTechnologyCo.,Ltd.certifiesthattheequipmentforwhichauthorizationis soughtdoesnotincludecybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc. oranyofitssuccessorsandassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyof itssuccessorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB 986446D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, Rev1/26/2023 HuizhouBeijiaElectronicTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:06-02-2026 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2A2X2-T621 HuizhouBeijiaElectronicTechnologyCo.,Ltd.certifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredList(asaspecificallynamedentityoranyofits subsidiariesoraffiliates)asanentityproducing“covered”equipment. Sincerely,

DifferencesDeclaration FCCID:2A2X2-T621 Towhomconcern, WecompanyHuizhouBeijiaElectronicTechnologyCo.,Ltd. Herebydeclares: Themodelhasmultipleappearancecolor.theseproductaresamePCBLayout,Schematics,BOM.Onlyfor differentappearancecolorfordifferentmarketrequire. Sincerelyyours, Title:QualitySupervisor Email:[email protected] Telephone:8613049498387 Onbehalfof:HuizhouBeijiaElectronicTechnologyCo.,Ltd.

HuizhouBeijiaElectronicTechnologyCo.,Ltd. Date：2026.06.02 ProductModelNumber:T621 FCCID：2A2X2-T621 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyQAILaboratoriesLtd.onour behalfshallhavethesameeffectasactsofourown. By: Title:QualitySupervisor Email:[email protected] Telephone:8613049498387 Onbehalfof:HuizhouBeijiaElectronicTechnologyCo.,Ltd.

HuizhouBeijiaElectronicTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:June4,2026 Subject;RequestforConfidentiality FCCID:2A2X2-T621 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:Zhuxiaoya Title:QualitySupervisor

FCCID:2A2X2-T621ReportNumber:BTF260420R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page1of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 AppendixIIExternalPhotos FCCID:2A2X2-T621ReportNumber:BTF260420R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page2of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 FCCID:2A2X2-T621ReportNumber:BTF260420R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page3of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 FCCID:2A2X2-T621ReportNumber:BTF260420R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page4of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00

Label&Location LabelSizeL*W:50mm*15mm WalkieTalkie Model:T621 FCCID:2A2X2-T621

FCCID:2A2X2-T621ReportNumber:BTF260420R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page1of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 AppendixIIIInternalPhotos FCCID:2A2X2-T621ReportNumber:BTF260420R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page2of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 FCCID:2A2X2-T621ReportNumber:BTF260420R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page3of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00 FCCID:2A2X2-T621ReportNumber:BTF260420R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page4of4 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, Guangdong,China Email:[email protected]:+86-755-23146130http://www.btf-lab.comVersion:1/00

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 35 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,Guangdong,China SARTestReport For ApplicantName:HuizhouBeijiaElectronicTechnologyCo.,Ltd. Address: 4thFloor,YishengIndustrialPark,No.59JiaotangMiddleRoad, BaishiVillage,QiuchangStreet,HuiyangDistrict,HuizhouCity, GuangdongProvince,China EUTName:WalkieTalkie ModelNumber:T621 IssuedBy CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: Plant101,201and301,Building1,Block2,TantouIndustrial Park,TantouCommunity,SonggangStreet,Bao'anDistrict, Shenzhen,Guangdong,China ReportNumber:BTF260420R00201 TestStandards:47CFRPart2.1093IEEE1528-2013IEEEC95.1-2019 FCCID:2A2X2-T621 TestConclusion:Pass TestDate:2026-05-13 DateofIssue:2026-05-19 TestedBy: EllaKu/Tester Date:2026-05-19 PreparedBy: AmendaZhong/ProjectEngineer Date:2026-05-19 ApprovedBy: Ryan.CJ/EMCManager Date:2026-05-19 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF260420R00201 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 35 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,Guangdong,China RevisionHistory VersionIssueDateRevisionsContent R_V02026-05-19Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF260420R00201 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 35 BTFTestingLab(Shenzhen)Co.,Ltd. Plant101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,Guangdong,China TableofContents 1.Introduction...............................................................................................................................................................................4 1.1IdentificationofTestingLaboratory.................................................................................................................................4 1.2IdentificationoftheResponsibleTestingLocation..........................................................................................................4 1.3LaboratoryCondition.......................................................................................................................................................4 1.4Announcement................................................................................................................................................................4 2.ProductInformation..................................................................................................................................................................5 2.1ApplicationInformation....................................................................................................................................................5 2.2ManufacturerInformation................................................................................................................................................5 2.3FactoryInformation.........................................................................................................................................................5 2.4GeneralDescriptionofEquipmentunderTest(EUT).....................................................................................................5 2.5TechnicalInformation......................................................................................................................................................5 3.SummaryofTestResults.........................................................................................................................................................6 3.1TestStandards................................................................................................................................................................6 3.2DeviceCategoryandSARLimit......................................................................................................................................7 3.3TestResultSummary......................................................................................................................................................7 3.4TestUncertainty..............................................................................................................................................................8 4.MeasurementSystem.............................................................................................................................................................10 4.1SpecificAbsorptionRate(SAR)Definition....................................................................................................................10 4.2MVGSARSystem.........................................................................................................................................................10 5.SystemVerification.................................................................................................................................................................15 5.1PurposeofSystemCheck.............................................................................................................................................15 5.2SystemCheckSetup.....................................................................................................................................................15 6.TESTPOSITIONCONFIGURATIONS......................................................................................…

Text truncated - open the document above for the full version.

Page: 1/10 Ref : ACR.78.3.26.PAR.A BTF TESTING LAB (SHENZHEN) CO., LTD. F101,201 AND 301, BUILDING 1, BLOCK 2, TANTOU INDUSTRIAL PARK, TANTOU COMMUNITY SONGGANG STREET, BAO'AN DISTRICT, SHENZHEN, CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: 0125-EPGO-445 Calibrated at MVG 13 Rue du Zephyr 91140 Villejust - FRANCE Calibration date: 03/03/2026 Scope available on :https://a2la.org/ Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E-Field Probe calibration performed at MVG, using the CALIPROBE test bench, for use with a MVG COMOSAR system only. The test results covered by accreditation are traceable to the International System of Units (SI). COMOSAR E-Field Probe Calibration Report Docusign Envelope ID: B9F2DB03-1600-44DE-BB82-C27B1DB45E57 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.3.26.PAR.A Page: 2/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Function Date Signature Prepared by : Pedro Ruiz Technical Manager 3/18/2026 Checked & approved by: Pedro Ruiz Technical Manager 3/18/2026 Authorized by: Christophe Barrot Quality Manager Customer Name Distribution : BTF Testing Lab (Shenzhen) Co., Ltd. Issue Name Date Modifications A Pedro Ruiz 3/18/2026 Initial release Docusign Envelope ID: B9F2DB03-1600-44DE-BB82-C27B1DB45E57 2026 March 19 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.3.26.PAR.A Page: 3/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Sensitivity _______________________________________________________________ 4 3.2 Linearity ________________________________________________________________ 4 3.3 Isotropy _________________________________________________________________ 5 3.4 Boundary Effect __________________________________________________________ 5 3.5 Probe Modulation Response _________________________________________________ 5 4 Measurement Uncertainty .......................................................................................... 6 5 Calibration Results ..................................................................................................... 6 5.1 Calibration in air __________________________________________________________ 6 5.2 Calibration in liquid _______________________________________________________ 7 6 Verification Results ................................................................................................... 8 7 List of Equipment ...................................................................................................... 9 Docusign Envelope ID: B9F2DB03-1600-44DE-BB82-C27B1DB45E57 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.3.26.PAR.A Page: 4/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number 0125-EPGO-445 Product Condition (new / used) Used Frequency Range of Probe 0.15 GHz-7.5GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.206 M Dipole 2: R2=0.207 M Dipole 3: R3=0.226 M 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG’s COMOSAR E field Probes are built in accordance to the IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards. Figure 1 – MVG COMOSAR Dosimetric E field Probe Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their effect. All calibrations / measurements performed meet the fore-mentioned standards. 3.1 SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards for frequency range 600- 7500MHz and using the calorimeter cell method (transfer method) as outlined in the standards for frequency 150-450 MHz. 3.2 LINEARITY The evaluation of the linearity was done in free space using the waveguide, performing a power sweep to cover the SAR range 0.01W/kg to 100W/kg. Docusign Envelope ID: B9F2DB03-1600-44DE-BB82-C27B1DB45E57 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.78.3.26.PAR.A Page: 5/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vN This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 3.3 ISOTROPY The axial isotropy was evaluate…

Text truncated - open the document above for the full version.

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed. Page1of32 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RFTestReport For ApplicantName:HuizhouBeijiaElectronicTechnologyCo.,Ltd. Address: 4thFloor,YishengIndustrialPark,No.59JiaotangMiddleRoad, BaishiVillage,QiuchangStreet,HuiyangDistrict,HuizhouCity, GuangdongProvince,China EUTName:WalkieTalkie BrandName:N/A ModelNumber:T621 SeriesModel Number: N/A FCCID:2A2X2-T621 IssuedBy Companyname: BTFTestingLab(Shenzhen)Co.,Ltd. Address: 101/201/301,Building1,Block2,TantouIndustrialPark,Tantou Community,SonggangSubdistrict,Bao’anDistrict,Shenzhen,China Reportnumber: BTF260420R00101 Teststandards: FCCCFRTitle47Part95 Testconclusion: Pass Dateofsample receipt: 2026-04-22 Testdate: 2026-04-22to2026-05-29 Dateofissue: 2026-05-29 Testby: Sean.He/Tester Preparedby: Approvedby: Chris.Liu/ProjectengineerRyan.CJ/EMCmanager Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF260420R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed. Page2of32 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02026-05-29Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF260420R00101 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed. Page3of32 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China TableofContents 1INTRODUCTION........................................................................................................................................................5 1.1LaboratoryLocation...................................................................................................................................5 1.2LaboratoryFacility......................................................................................................................................5 1.3Announcement............................................................................................................................................5 2PRODUCTINFORMATION.......................................................................................................................................6 2.1ApplicationInformation.............................................................................................................................6 2.2ManufacturerInformation..........................................................................................................................6 2.3FactoryInformation....................................................................................................................................6 2.4GeneralDescriptionofEquipmentunderTest(EUT).............................................................................6 2.5TechnicalInformation.................................................................................................................................6 2.6ChannelList................................................................................................................................................7 2.7TestChannel................................................................................................................................................7 3SUMMARYOFTESTRESULTS...............................................................................................................................8 3.1TestStandards............................................................................................................................................8 3.2UncertaintyofTest.....................................................................................................................................8 3.3SummaryofTestResult.............................................................................................................................8 4TESTCONFIGURATION...........................................................................................................................................9 4.1TestEquipmentList....................................................................................................................................9 4.2TestAuxiliaryEquipment...........................................................................................................................9 4.3TestModes................................................................................................................................................10 5TESTCONDITIONSANDRESULTS......................................................................................................................11 5.1MaximumTransmitterPower(EffectiveRadiatedPower)....................................................................11 5.1.1E.U.T.Operation:...........................................................................................................................12 5.1.2TestSetupDiagram:......................................................................................................................12 5.1.3TestData:......................................................................................................................................13 5.2EmissionBandwidth....................................................................................................................…

Text truncated - open the document above for the full version.