2A36Q-TCARUNBoomtag Car Charger

Product OverviewCharging Tracking ON/OFF USB-A QC.4 LED BOOMTAG Car Chager Input: DC12-24V Output A/C: A: DC5V/3A,9V/3A,12V/2.5A (30W Max) C: DC5V/3A,9V/3A,12V/2.5A (30W Max) PPS: DC3.3-11V/3A (33W Max) C+A: DC5V/3A (15W Max) Maximum Output: 33W Max Material: PCGRS+ Aluminum Size: Φ 32.5x H 69 mm Certificates: Complies with CE & ROHS 30W Car Charger Boomtag Car Charger Regularly clean the charging device with a dry cloth. The device must be disconnected when cleaning it. Avoid damaging the charging device cable. Do not place objects on it. Do not pull the charging device by the cable to disconnect it. Keep the cable extended when the charging device is connected. Disconnect the device you are charging once it is fully charged. Also, disconnect the charging device from the cigarette lighter socket. Do not expose the charging device to water. Always keep it in a dry place, away from humidity. When rolling up the cable, do not bend the section where the cable connects to the charging device too sharply. Avoid dropping or hitting the charging device, as it may be damaged Please read the following instructions before using the charging device for the first time: Connect the charging device to a suitable power source that complies with the voltage input parameters. Do not attempt to open the charging device, as you might damage it. While using the charging device, keep it away from heat sources (fire) and humidity (water and other liquids). Keep it out of reach of children. Do not leave the charging device in contact with flammable materials. Do not turn on the car if the charging device is connected to the cigarette lighter socket. Prevent the charging device from receiving a power surge from the car ignition. Disconnect the charging device from the car cigarette lighter socket when not in use. Do not leave the charging device connected after turning off the car engine. Do not use the charging device if you notice any visible defects. If the charging device has USB ports, we recommend using the original USB cable of your mobile device for charging. Do not disassemble or modify the charging device. These actions will void the warranty. Note The features and functions described in this manual are based on tests conducted by the factory lab. It is the user's responsibility to inspect and verify the product after purchase. Our factory is not responsible and will not be held liable for any personal injury, economic loss, material damage, or any other damage resulting from misuse, abuse, or improper installation of the product. This product should not be disposed of with other household waste in the EU. To prevent potential harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use local return and collection systems or contact the retailer where the product was purchased. They can facilitate environmentally safe recycling of the product. Electronic products not included in the selective sorting process may pose a danger to the environment and human health due to the presence of hazardous substances. Safety Information and Product Care Waste electrical products should not be disposed of with household waste.Please recycle where facilities exist. Check with your Local Authority for recycling advice. Press 1. Press and hold for 5 seconds to switch on. 2. Open the Apple Find My App. 3. Tap Add Item. 4. Tap Other Supported Item. 5. BOOMTAG recharge universal will appear. Tap Connect. 6. You are now connected. Disconnect: 1. Open the app and select the item. 2. Scroll to the bottom of the screen. 3. Tap Remove Item and then tap Remove to confirm. Factory Reset : 1. Press the button 4 times. 2. Wait for the beeps, then immediately Press & hold the button for 8 seconds. Power off/Disable: Press 5 times quickly. 1. Press and hold for 5 seconds to switch on. 2. Open the Android Find My Devices App. 3. You will receive a pairing notification to set up BOOMTAG recharge. 4. Follow the on-screen instructions to complete the pairing process. Disconnect: 1. Open the app and tap on the item. 2. Tap the settings icon on the right of the item. 3. Tap "Remove from Find My Device" to disconnect. Factory Reset : 1. Press the button 4 times. 2. Wait for the beeps, then immediately press & hold the button for 8 seconds. Power Off/Disable: Press 5 times, beeps will sound. This product has been certified by Google to meet Find Hub network accessory specifications. Google is not responsible for the operation of this product. Google is also not responsible for ensuring that the product complies with any applicable safety standards or other requirements. Android is a trademark of Google LLC. FCC ID: 2A36Q-TCARUN Statment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the …

Text truncated - open the document above for the full version.

Boompods EU Sp. z o.o Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Sep. 8, 25 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2A36Q-TCARUN Boompods EU Sp. z o.o certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Jay Cheung Title: Product manager Address: ul. Barbary 16 Granica 05-806 Komorow Poland Tel.: 13922919429 Email: [email protected]

Boompods EU Sp. z o.o 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Sep. 8, 25 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: [2A36Q-TCARUN] Product Name: [Boomtag Car Charger] This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Jay Cheung Title: Product manager Address: ul. Barbary 16 Granica 05-806 Komorow Poland Tel.: 13922919429 Email: [email protected] Boompods EU Sp. z o.o 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) [For Device is not Inherent compliance] Section Component Name Version Supplier 1 2 3

1/1 HOPEKCORPORATIONINC USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:16755CoyoteBushDrUnit84,SanDiego,CA92127UnitedStates FRN:0034562900 ContactName:PeterDavis TelephoneNo:561-235-6113 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofBoompodsEUSp.zo.o TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:BoompodsEUSp.zo.o ProductDescription:BoomtagCarCharger FRN:0031801137 GranteeCode:2A36Q FCCID:2A36Q-TCARUN ContactName:JayCheung Address:ul.Barbary16Granica05-806KomorowPoland TelephoneNo:13922919429 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2025/09/08 Applicant’sName: BoompodsEUSp.zo.o USAgentforServiceofProcess’sName: HOPEKCORPORATIONINC Title:ProductmanagerTitle:Manager SignatureSignature

Boompods EU Sp. z o.o Family models declaration letter Sept. 08, 2025 We Boompods EU Sp. z o.o Of ul. Barbary 16 Granica 05-806 Komorow Poland Declare under our sole responsibility that the product FCC ID: 2A36Q-TCARUN Product: Boomtag Car Charger Model Number: TCARUN, TBCARX, TDCASA Except for the model, color, and system differences (TCARUN for Apple+Google system, TBCARX for Apple system, TDCASA for Google system), all models have the same circuits and modules. Jay Cheung/ Product manager E-mail : [email protected] Phone : 13922919429 Fax : 13922919429 Address : ul. Barbary 16 Granica 05-806 Komorow Poland

Boompods EU Sp. z o.o (Sept. 08, 2025) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2A36Q-TCARUN Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below :  Block Diagram  Schematics  Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Sincerely, (Signature) Title: Product manager Address: ul. Barbary 16 Granica 05-806 Komorow Poland Tel.: 13922919429 Email: [email protected]

Boompods EU Sp. z o.o (Sept. 08, 2025) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2A36Q-TCARUN I, the undersigned, hereby authorize (Shenzhen HongBiao Certification& Testing Co., Ltd) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Shenzhen HongBiao Certification& Testing Co., Ltd) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (Boompods EU Sp. z o.o). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) (Full name of contact person listed on FCC’s website) Jay Cheung (Title) Product manager Tel: 13922919429 Fax: 13922919429 Email: [email protected]

Ext Photos Model: TCARUN Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

4.4mm 0.7 mm 204-B01085 Boomtag Car Charger FCC ID: 2A36Q-TCARUN

Int Photos Model: TCARUN Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 Photo 9 Photo 10 Photo 11 Photo 12 Photo 13 Photo 14 ANT

- Page 1 of 10 - Report No.: HB20250819060E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: Boomtag Car Charger Trade Mark: BOOMPODS Model Number: TCARUN FCC ID: 2A36Q-TCARUN Prepared for Boompods EU Sp. z o.o ul. Barbary 16 Granica 05-806 Komorow Poland Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 10 - Report No.: HB20250819060E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 7 2.1 TEST LABORATORY ..................................................................................................................................................... 7 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 2.4 TEST SOFTWARE ........................................................................................................................................................ 7 3 LIST OF TEST EQUIPMENT ................................................................................................................................ 8 4 RF EXPOSURE .................................................................................................................................................. 9 4.1 STANDALONE SAR TEST EXCLUSION CONSIDERATIONS........................................................................................................ 9 4.1.1. Limit ............................................................................................................................................................ 9 4.1.2. Test Result ................................................................................................................................................... 9 - Page 3 of 10 - Report No.: HB20250819060E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Boompods EU Sp. z o.o Address ................................. : ul. Barbary 16 Granica 05-806 Komorow Poland Manufacturer's Name .......... : Dongguan Linyar Technology Co.,Ltd. Address ................................. : The third floor, building 2,No.4 Xitou East Road,Houjie Town,Dongguan,China Product description Product name ........................ : Boomtag Car Charger Model Number ....................... : TCARUN Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 447498 D01 General RF Exposure Guidance v06 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Aug. 19, 2025~Aug. 21, 2025 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : (M i n g L i u) Authorized Signatory : (L e o S u) - Page 4 of 10 - Report No.: HB20250819060E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 Aug. 21, 2025 Original - Page 5 of 10 - Report No.: HB20250819060E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com 1 General Description 1.1 Description of EUT Product name: Boomtag Car Charger Model name: TCARUN Series Model: TBCARX, TDCASA Different of series model: Except for the model, color, and system differences (TCARUN for Apple+Google system, TBCARX for Apple system, TDCASA for Google system), all models have the same circuits and modules. Operation frequency: 2402-2480MHz Mo…

Text truncated - open the document above for the full version.

FileVersion：202201 property in copyright 1 Parts Approval Sheet Guozhi Xin BP75 Linyar Supplier： Type/Spec： Brand ： NQI 2025/05/26 Send out Date： Approve Date： Parts Name： FPC ANT Parts No: NQI-BP75-BT-FB-V0 Quantity： Document No：NQI-RD-SPEC-20250536 V0 Version： Contact：No. 103, Building 7, Kangli City, 66 Pingji Avenue, Longgang District, Shenzhen City Email：[email protected] Tel：+86-0755-28500656 Fax：+86-0755-28700656 FileVersion：202201 property in copyright 2 Resume DateVersins Reasons for change Content of change Note May 26, 2025 First edition release FileVersion：202201 property in copyright 3 catalogue 一 . Samples and Instructions.........................................................4 二 . Testing equipment and projects.........................................4-6 三 . Darkroom connection and coordinates................................6 四 . Antenna matching network.......................................................6 五 . Antenna electrical performance test data...................................................7-11 六 . Antenna structure drawing.............................................................12 七 . Key Dimension Inspection Report......................................................13 FileVersion：202201 property in copyright 4 一. Samples and Instructions 二. Testing equipment and projects ClassTest itemEquipment 1. S parameter 1.RL 2.VSWR 3.Smith chart VNA: Agilent E5071B R&SZVB8 Protek A333 2. Coupling testing） 1. MAX Power 2. MIN Sens 1.2G/3G Tester：Agilent 8960 2.The coupling box：TESCOMTC-5060A 3. 3D Chamber：ETS 3D Chamber（5x3x3） （Electrical Specifications） （Frequency range） （2400-2500)MHz （impedance） 50 ohm （VSWR） ≤2 （Gain） -0.2DBi （Polarization） level （Radiation direction） omnibearing （Connection Mode Description） （ connector） / （Cable specifications） / （Working/Storage temperature） （Working temperature） -30°C～65°C （Storage temperature） -30°C～75°C FileVersion：202201 property in copyright 5 3. Passive Test 1. Effeciency 2. Gain 3.Radiation pattern 1. 3D Chamber：TEM24 3D Chamber（5x5x5） ETS 3D Chamber（5x3x3） 2. VNA：Agilent E5071B R&SZVB8 4.Active Test 1.3D TRP 2.3D TIS 3.Throughput rate 1. 3D Chamber：TEM24 3D Chamber（5x5x5） ETS 3D Chamber（5x3x3） 2.2G/3G Tester: Agilent 8960 3.4G Tester：MT8820C/CMW500 4.WIFI/BT/NB-iot Tester：CMW500 5. 5G Tester：SP9500-CTS 6.Head：HEAD-P10（FACE-P10） FileVersion：202201 property in copyright 6 三. Darkroom connection and coordinates 四. Antenna matching network Element L （ Value ） R （ Value ） E1(0201)NCNC E2(0201)0Ω0Ω E3(0201)NCNC FileVersion：202201 property in copyright 7 五. Antenna electrical performance test data 5.1 RL/VSWR/Smith Chat 5.2 Gain and efficiency Frequency/MhzMaxGain/dBiEfficiency / % 2400-0.218.62 2410-0.3418.41 2420-0.219.5 2430-0.8918.45 2440-1.5418.16 2450-217.46 2460-2.1417.3 2470-2.2516.98 2480-2.5616.14 2490-2.4516.79 2500-2.616.9 FileVersion：202201 property in copyright 8 5.3 3 D Picture FileVersion：202201 property in copyright 9 FileVersion：202201 property in copyright 10 FileVersion：202201 property in copyright 11 5.2 TRP&TIS NQIANTTRP&TIS parameter Summary of BP75 TRP&TIS TestBluetooth TRP Result01939 TRP(dBm) -6.84-7.79-5.19 TIS(dBm) -90.69-90.09-91.27 FileVersion：202201 property in copyright 12 六.Antenna structure drawing White characters Black ink copper foil Base material PI 3M9471 Glue Forward line Base material pair and half The area with adhesive on the back side FileVersion：202201 property in copyright 13 七. Key Dimension Inspection Report Key Dimension Inspection Report client Linyarproject BP75 materials FPC environment-friendly materials Non-environmentally friendly materials Surface Inspection □exposed unster □broken line □short circuit □scratch □smudginess □Cracking severitydeadly defect quantity： 0 slight Appearance judgment result： qualifieddisqualification Function or Dimension Inspection Record NO check another serial number dimensional tolerance check the result detecting instrument decision 12345 FPC 111.35±0.1533.3533.3333.3233.3533.33DNOK 29.55±0.159.559.569.559.589.54DNOK Overall determination: disquali fication Non-conforming product handling method： reworkRoyalty Measurement instrument code explanation: Projector - PP; Chuck - PG; Height gauge - HG; Angle gauge - AG; Micrometer caliper - N Digital Caliper - DN External Micrometer - M Other testing methods code: Three-coordinate - 3D Thread Gauge - SG Specialized fixture - SE Visual Inspection - E Remark： Measurement person: Liu Min Shenzhen Guozhi Xin Network Communication Co., Ltd. qualified

- Page 1 of 53 - Report No.: HB20250819060E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: Boomtag Car Charger Trade Mark: BOOMPODS Model Number: TCARUN FCC ID: 2A36Q-TCARUN Prepared for Boompods EU Sp. z o.o ul. Barbary 16 Granica 05-806 Komorow Poland Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 53 - Report No.: HB20250819060E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 6 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 6 1.2 TEST MODE .............................................................................................................................................................. 6 1.3 OPERATION CHANNEL LIST ........................................................................................................................................... 7 1.4 TEST SETUP .............................................................................................................................................................. 7 1.5 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 7 1.6 ANCILLARY EQUIPMENT .............................................................................................................................................. 7 2 SUMMARY OF TEST RESULT ............................................................................................................................. 8 3 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 9 3.1 TEST LABORATORY ................................................................ ..................................................................................... 9 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 9 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 9 3.4 TEST SOFTWARE ...................................................................................................................................................... 10 4 LIST OF TEST EQUIPMENT .............................................................................................................................. 11 5 TEST ITEM AND RESULTS ............................................................................................................................... 13 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 13 5.1.1 Standard Requirement ............................................................................................................................. 13 5.1.2 Test Result ................................................................................................................................................. 13 5.2 CONDUCTED EMISSION ............................................................................................................................................. 14 5.2.1 Limits ................................ ........................................................................................................................ 14 5.2.2 Test Procedures ......................................................................................................................................... 14 5.2.3 Test Setup.................................................................................................................................................. 15 5.2.4 Test Result ................................................................................................................................................. 15 5.3 RADIATED EMISSION ................................................................................................................................................ 16 5.3.1 Limits ........................................................................................................................................................ 16 5.3.2 Test Procedures ......................................................................................................................................... 16 5.3.3 Test Setup...............................................................................................................................…

Text truncated - open the document above for the full version.