2A3EG-RUBENST8TABLET PC

T8 Drawing Tablet 8 FCC ID: 2A3EG-RUBENST8 MADE IN P.R.C. Type-C Volume up Volume down 5 234 1

1243 5 Use a USB-C to USB OTG adapter for the drawing tablet to connect USB accessories, such as mouse, keyboard, thumbdrive. When typing for a longer period time and content, try to use the OTG adapter to connect a full-size keyyboard to improve the typing efficiency and productivity. 1280x800 Type-C Port 13 FCC Statement TABLET PC has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Specific Absorption Rate (SAR) information: TABLET PC meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: TABLET PC has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the TABLET PC kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0mm separation distance between the user's body and the back of the TABLET PC. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. T8 T8 ありがとうございます！ このRubensTab T8タブレットをお買い上げいただき、誠にありがとうございます。このガイドは、タブレットをすばやく使い始 めるのに役立 つように提供 されています。よくお読み になり、今後 に参照 できるように保存 してください。 パッケージの内容 以下 のアイテムがパッケージに含まれていることを確認 してください。部品 が不足 している場合は、この製品 を購入 した販売店にお 問い合わせください。 PDF ファイルを表示 するには、AdobeのWeb サイト (www.adobe.com) から無料 のAdobe Acrob at リーダーをダウンロード してインストールします。 スタンドアロン描写タブレット 描きペン 描き用手袋 画面保護用フィルム チャージャー USBケーブル レザーケース 取扱説明書 機能紹介 ●ウェブサイトの閲覧 お気に入りのウェブサイトにアクセスする ●メールの確認 友人 や家族 と連絡 を取り合います。 ●Y otube の動画 を鑑賞 する 世界 で最も人気 あるビデオ共有 コミュニティを閲覧 します。 ●Android用のアプリが千以上に探索可能 ゲーム、アプリケーションなどいろいろなアプリがアプリスト アの中にあります。 ●インターネットにワイヤレス接続 できる 高速 のWi-Fi 802.11 a/b/g/n/ ac ネットワーク ●どこでも本（電子版）を楽しめる ポータブルパワーハウスは、 人気 のある音楽 、ビデオ、写真 の形式 を再生 します ●マイクロSD メモリーカードが対応可能 ストレージ容量 を増やします。(最大256GBのポートをサポート) ●カメラ内蔵 便利な前面 と背面 カメラ内蔵 されます。 ●自動的に方向 を検出 する お好きなように読んでください。ディスプレイは自動的に調整 されます! FCC ID: 2A3EG-RUBENST8 MADE IN P.R.C. Type-C 音量ダウン 音量アップ タッチスクリーン タブレットには使いやすいタッチスクリーンが搭載 されています。 タブレットの機能 をオンにするには、指先 で画面 に軽く触れる必要 があります。 複数 の指でジェスチャーを実行 することができます。（例： 2本 の指で写真 を縮小 できる） 保護フィルム 出荷時には、タッチスクリーンを保護 するために薄いフィルムが貼られています。この保護 フィルムは、使用 する前に剥がしてくだ さい。フィルムをはがすには、フィルムの角を取り、スクリーンからはがします。 タッチスクリーンの操作 ベゼルにある3つのタッチキーと組み 合わせて、タッチスクリーンを使用 してタブレットの機能 を制御 することができます。タッチス クリーンでタブレットを操作 するには、指先 で画面 に表示 されているアイコン、ボタン、 メニュー項目 、オンスクリーンキーボードな どを操作 します。 タッチスクリーンでは、指先 を使って次の 操作 を行うことができます。 タッチする：画面上のアイテム（アプリケーションアイコン、ボタン、 メニューアイテム、オンスクリーンキーボードの文字／記号など） をアクティブにするには、指先 でタッチするだけです。 タッチアンドホールド 画面上のアイテムの中には、タッチしたままにしておくと別の動作 をするものがあります（別のメニューを開 いたり、ドラッグ機能 を有効 にしたりする場合など）。アイテムをタッチして保持 するには、そのアイテムに触れ、アクションが発生 す るまで指先 を離さないようにします。 ドラッグ：画面上のアイテムをドラッグして位置 を変更 します（例： ホーム画面 のアプリアイコン）。アイテムをドラッグするには タッ チしたまま指先 を離さずに、指を動か し、目的 の場所 に移動 させます。 スクリーンを壊さないように、力強 くしたり、指以外のものに触ったりしないでください。 最適なレスポンスを得るためには、タッチスクリーンのコントロールを使用 する前に両手 をきれいにしてください。 スワイプ:スワイプするには、タッチスクリーンを指で押した状態のまま、上下左右にスライドさせる動作 します。 指先 が画面 に接触 した時点 で一時停止をすると、誤ってアイテムをドラッグしてしまうことがあります。 ダブルタップ：ウェブページやその他の アプリケーションの画面上で、画面 を軽く2回 タップしてズームします（アプリケーションが ダブルタップ／ズーム機能 に対応 している必要 があります）。ブラウザでは、ウェブページの一部 をダブルタップすると、その部分 が画面の幅に合わせて拡大表示されます。 方位 センサーについて タブレットにはセンサーが搭載 されており、タブレットを回転 させると、ほとんどの画面の向きが自動的に変更 されます。 このセンサーは、 タブレットを地面 に対して垂直 に回転 させたとき（つまり、タブレットを背中 に平らにせず、垂直 に保持 したとき） に最も効果的に働きます。 方向 センサーは、 アクセシビリティ設定 メニューでオン/オフを切り替えることができます。 タブレットを充電 する 現在 のバッテリーの状態は、画面右上の通知 バーに常に表示 されます。バッテリーの状態 に応じて、バッテリーアイコンが変化 します。 充電器に接続 すると、トップバーのステータスエリアに充電中アイコンが表示 されます。バッテリーアイコンの内側 にある雷マークにもご注目 ください。 メモリーカードを挿入 する タブレットは、micr oSD メモリーカードに対応 しています。micr oSD カードスロットにメモリーカードを挿入 すると、以下 のことができます。 タブレットのメモリ容量 を増やす メモリカードに保存 されたメディアファイル（音楽 、動画 、写真 ファイルなど）を再生 します。 カードスロットにmicr oSD カード以外のものを差し込まないでください。対応 したメモリーカードであれば、カードス ロットに簡単 に挿入 できます。抵抗 がある場合は、カードの向きを確認 してください。カードを無理 に差し込まないでく ださい。カードの金色 の接点 に触れないようにしてください。 メモリーカードを挿入 する 1. メモリカードをカードスロットに合わせます。メモリカードの金属接点は、LCD スクリーンから離して下向 きにする必要 があります。 2. カードをバネ式スロットにスライドさせます。カチッと音がするまでカードを押し込んでください。 バッテリーを充電 する 1. U SB ケーブルのUSB側 を付属 アダプターのUSB ポートに接続 します。 2. U SB ケーブルのUSB-C側をタブレットのUSB ポートに差し込みます。 このデバイスに使用 されているバッテリーは、 誤って使用 すると火災 や火傷 の原因 となることがあります。 分解 したり、焼却 したり、加熱 したりしないでください。直射日光の当たる場所 や、窓を閉めた車内 に放置しないで ください。 感電 の恐れがありますので、表示以外の電源 に接続しないでください。 バッテリー保護機能およびバッテリー残量 が少な いと、タブレットが起動しなくなることがありますので、バ…

Text truncated - open the document above for the full version.

Shenzhen Furunsi Technology Co., Ltd. Building E, Yuanfen Innovation Park, Bulong Road, Dalang Street, Longhua District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-12-20 To whom it may concern: We, Shenzhen Furunsi Technology Co., Ltd., hereby certify that the equipment for which authorization is sought (FCC ID: 2A3EG-RUBENST8) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature long jin CEO Shenzhen Furunsi Technology Co., Ltd. 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V03

Shenzhen Furunsi Technology Co., Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 12/19/2023 U.S. Agent Designation Sh enzhen Furunsi Technology Co., Ltd. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2A3EG-RUBENST8): Name and company of U.S. agent: FCC US Agent, LLC Physical U.S. address of agent: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent: 0033402884 Email address of U.S. agent: [email protected] FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of Shenzhen Furunsi Technology Co., Ltd.. Shenzhen Furunsi Technology Co., Ltd. with the FRN 0031508971 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Since rely, Signature long jin CEO Shenzhen Furunsi Technology Co., Ltd. Signature Tim Payne Manager FCC US Agent, LLC 48_[model] US_Agent_2.911(d)(7)-U, V05

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2023-12-20> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2A3EG-RUBENST8 T8 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： long jin/CEO Company: Shenzhen Furunsi Technology Co., Ltd. Address: Building E, Yuanfen Innovation Park, Bulong Road, Dalang Street, Longhua District, Shenzhen, China Phone: 18575587697 Fax: 18575587697 E-Mail: [email protected]

Shenzhen Furunsi Technology Co., Ltd. Building E, Yuanfen Innovation Park, Bulong Road, Dalang Street, Longhua District, Shenzhen, China Date: 2023-12-20 FCC ID: 2A3EG-RUBENST8 Model Number: T8 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Shenzhen Furunsi Technology Co., Ltd., declare that this EUT (FCC ID: 2A3EG-RUBENST8) doesn’t have Ad Hoc mode function on “non-US/Canada frequencies”. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title： long jin/CEO Company: Shenzhen Furunsi Technology Co., Ltd. Address: Building E, Yuanfen Innovation Park, Bulong Road, Dalang Street, Longhua District, Shenzhen, China Phone: 18575587697 Fax: 18575587697 E-Mail: [email protected]

Shenzhen Furunsi Technology Co., Ltd. Building E, Yuanfen Innovation Park, Bulong Road, Dalang Street, Longhua District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2023-12-20 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2A3EG-RUBENST8 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： long jin/CEO Company: Shenzhen Furunsi Technology Co., Ltd. Address: Building E, Yuanfen Innovation Park, Bulong Road, Dalang Street, Longhua District, Shenzhen, China Phone: 18575587697 Fax: 18575587697 E-Mail: [email protected]

Page1of5FCCID:2A3EG-RUBENST8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity ExternalPhotosoftheEUT Fig.1 Fig.2 Page2of5FCCID:2A3EG-RUBENST8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.3 Fig.4 Page3of5FCCID:2A3EG-RUBENST8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.5 Fig.6 Page4of5FCCID:2A3EG-RUBENST8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.7 Fig.8 Page5of5FCCID:2A3EG-RUBENST8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.9 Fig.10

Page1of1FCCID:2A3EG-RUBENST8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity LABELANDLOCATION (Size:L3.5cmxW1.5cm) LabelLocation TABLETPC Model:T8 FCCID:2A3EG-RUBENST8

Page1of7FCCID:2A3EG-RUBENST8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity InternalPhotosoftheEUT Fig.1 Fig.2 Antenna Page2of7FCCID:2A3EG-RUBENST8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.3 Fig.4 Page3of7FCCID:2A3EG-RUBENST8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.5 Fig.6 Page4of7FCCID:2A3EG-RUBENST8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.7 Fig.8 Page5of7FCCID:2A3EG-RUBENST8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.9 Fig.10 Page6of7FCCID:2A3EG-RUBENST8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.11 Fig.12 Page7of7FCCID:2A3EG-RUBENST8 ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.13 Fig.14 OnlyTFcardfunctionsaresupported

Page 1 of 4 FCC ID: 2A3EG-RUBENST8 Report No.: LCSA11133245EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix A Detailed System Check Results 1. System Performance Check System Performance Check 2450 MHz Head System Performance Check 5250 MHz Head System Performance Check 5750 MHz Head Date: 2023/12/8 Test Laboratory: LCS-SAR Lab System Check_2450Mhz Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity DUT: D2450V2; Type: D2450V2; Serial: 808 Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.802 S/m; ε r = 38.226; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: • Probe: EX3DV4 - SN3805; ConvF(7.42, 7.42, 7.42); Calibrated: 2023/11/23; • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE3 Sn419; Calibrated: 2023/6/20 • Phantom: SAM v5.0; Type: SAM; Serial: 1850 • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Unnamed procedure/Area Scan (4x8x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 17.1 W/kg Configuration/Unnamed procedure/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 84.18 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 26.3 W/kg SAR(1 g) = 12.6 W/kg; SAR(10 g) = 5.8 W/kg Maximum value of SAR (measured) = 19.5 W/kg 0 dB = 19.5 W/kg = 12.90 dBW/kg Date: 2023/12/11 Test Laboratory: LCS-SAR Lab System Check_5250Mhz DUT: D5GHzV2; Type: D5GHzV2; Serial: 1046 Communication System: UID 0, CW (0); Frequency: 5250 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5250 MHz; σ = 4.637 S/m; ε r = 36.15; ρ = 1000 kg/m 3 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Phantom section: Flat Section DASY Configuration: • Probe: EX3DV4 - SN3805; ConvF(5.38, 5.38, 5.38); Calibrated: 2023/11/23; • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE3 Sn419; Calibrated: 2023/6/20 • Phantom: SAM v5.0; Type: SAM; Serial: 1850 • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Unnamed procedure/Area Scan (5x5x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 17.8 W/kg Configuration/Unnamed procedure/Zoom Scan (7x7x7)Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 62.84 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 32.8 W/kg SAR(1 g) = 7.99 W/kg; SAR(10 g) = 2.23 W/kg Maximum value of SAR (measured) = 20.4 W/kg 0 dB = 20.4 W/kg = 13.10 dBW/kg Date: 2023/12/11 Test Laboratory: LCS-SAR Lab System Check_5750Mhz DUT: D5GHzV2; Type: D5GHzV2; Serial: 1046 Communication System: UID 0, CW (0); Frequency: 5750 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5750 MHz; σ = 5.328 S/m; ε r = 34.496; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity • Probe: EX3DV4 - SN3805; ConvF(4.88, 4.88, 4.88); Calibrated: 2023/11/23; • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE3 Sn419; Calibrated: 2023/6/20 • Phantom: SAM v5.0; Type: SAM; Serial: 1850 • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Unnamed procedure/Area Scan (5x5x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 21.1 W/kg Configuration/Unnamed procedure/Zoom Scan (7x7x7)Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 74.26 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 36.7 W/kg SAR(1 g) = 8.27 W/kg; SAR(10 g) = 2.28 W/kg Maximum value of SAR (measured) = 21.5 W/kg 0 dB = 21.5 W/kg = 13.32 dBW/kg

Page 1 of 4 FCC ID: 2A3EG-RUBENST8 Report No.: LCSA11133245EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix B Detailed Test Results 1. WIFI WIFI 2.4GHz for Body WIFI 5.2GHz for Body WIFI 5.8GHz for Body Date: 2023/12/8 Test Laboratory: LCS-SAR Lab WIFI 2.4G 802.11b 1CH Rear side 0mm DUT: TABLET PC; Type: T8; Serial: A231130048-1 Communication System: UID 0, WI-FI(2.4GHz) (0); Frequency: 2412 MHz;Duty Cycle: 1:1.004 Medium parameters used: f = 2412 MHz; σ = 1.779 S/m; ε r = 38.476; ρ = 1000 kg/m 3 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Phantom section: Flat Section DASY Configuration: • Probe: EX3DV4 - SN3805; ConvF(7.42, 7.42, 7.42); Calibrated: 2023/11/23; • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE3 Sn419; Calibrated: 2023/6/20 • Phantom: SAM v5.0; Type: SAM; Serial: 1850 • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Unnamed procedure/Area Scan (10x15x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.970 W/kg Configuration/Unnamed procedure/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.237 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 2.46 W/kg SAR(1 g) = 0.642 W/kg; SAR(10 g) = 0.214 W/kg Maximum value of SAR (measured) = 0.657 W/kg 0 dB = 0.657 W/kg = -1.82 dBW/kg Date: 2023/12/11 Test Laboratory: LCS-SAR Lab WIFI 5.2G 802.11ac80 42CH Rear side 0mm DUT: TABLET PC; Type: T8; Serial: A231130048-1 Communication System: UID 0, WI-FI(5.2GHz) (0); Frequency: 5210 MHz;Duty Cycle: 1:1.241 Medium parameters used: f = 5210 MHz; σ = 4.622 S/m; ε r = 36.277; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity • Probe: EX3DV4 - SN3805; ConvF(5.38, 5.38, 5.38); Calibrated: 2023/11/23; • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE3 Sn419; Calibrated: 2023/6/20 • Phantom: SAM v5.0; Type: SAM; Serial: 1850 • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Unnamed procedure/Area Scan (11x18x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.389 W/kg Configuration/Unnamed procedure/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 4.457 V/m; Power Drift = 0.17 dB Peak SAR (extrapolated) = 0.720 W/kg SAR(1 g) = 0.300 W/kg; SAR(10 g) = 0.129 W/kg Maximum value of SAR (measured) = 0.337 W/kg 0 dB = 0.337 W/kg = -4.72 dBW/kg Date: 2023/12/11 Test Laboratory: LCS-SAR Lab WIFI 5.8G 802.11ac80 155CH Rear side 0mm DUT: TABLET PC; Type: T8; Serial: A231130048-1 Communication System: UID 0, WI-FI(5.8GHz) (0); Frequency: 5775 MHz;Duty Cycle: 1:1.2 Medium parameters used: f = 5775 MHz; σ = 5.364 S/m; ε r = 34.486; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY Configuration: Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity • Probe: EX3DV4 - SN3805; ConvF(4.88, 4.88, 4.88); Calibrated: 2023/11/23; • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE3 Sn419; Calibrated: 2023/6/20 • Phantom: SAM v5.0; Type: SAM; Serial: 1850 • DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) Configuration/Unnamed procedure/Area Scan (11x18x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 0.418 W/kg Configuration/Unnamed procedure/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 4.352 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 0.682 W/kg SAR(1 g) = 0.271 W/kg; SAR(10 g) = 0.121 W/kg Maximum value of SAR (measured) = 0.299 W/kg 0 dB = 0.299 W/kg = -5.24 dBW/kg

Page 1 of 27 FCC ID: 2A3EG-RUBENST8 Report No.: LCSA11133245EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix C Calibration certificate 1. Dipole D2450V2-SN 808(2023-10-23) D5GHzV2-SN 1046(2023-10-23) 2. DAE DAE3-SN 419(2023-06-20) 3. Probe EX3DV4-SN 3805(2023-11-23) Page 2 of 27 FCC ID: 2A3EG-RUBENST8 Report No.: LCSA11133245EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 3 of 27 FCC ID: 2A3EG-RUBENST8 Report No.: LCSA11133245EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 4 of 27 FCC ID: 2A3EG-RUBENST8 Report No.: LCSA11133245EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 5 of 27 FCC ID: 2A3EG-RUBENST8 Report No.: LCSA11133245EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 6 of 27 FCC ID: 2A3EG-RUBENST8 Report No.: LCSA11133245EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 7 of 27 FCC ID: 2A3EG-RUBENST8 Report No.: LCSA11133245EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 8 of 27 FCC ID: 2A3EG-RUBENST8 Report No.: LCSA11133245EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 9 of 27 FCC ID: 2A3EG-RUBENST8 Report No.: LCSA11133245EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 10 of 27 FCC ID: 2A3EG-RUBENST8 Report No.: LCSA11133245EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 11 of 27 FCC ID: 2A3EG-RUBENST8 Report No.: LCSA11133245EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 12 of 27 FCC ID: 2A3EG-RUBENST8 Report No.: LCSA1113…

Text truncated - open the document above for the full version.