2A3GE910-0509Oakford Pellet Grills

× 59 7 6 F 8 8 7 6 F 8 8 60 9 9 10 × 61 10 × 62 11 12 11 12 C × 63 × 13 E 14 B 64 × × 1 2 B A 15 B 65 × 16 1 2 66 17 18 67 ×× 20 19 A D 68 21 22 ! 69 23 23 23 23 23 70 24 27 26 A × 71 25 1 2 3 28 29 72 30 73 THIS PAGE INTENTIONALLY LEFT BLANK PAGE LAISSÉE INTENTIONNELLEMENT VIDE PÁGINA DEJADA EN BLANCO INTENCIONALMENTE THIS PAGE INTENTIONALLY LEFT BLANK PAGE LAISSÉE INTENTIONNELLEMENT VIDE PÁGINA DEJADA EN BLANCO INTENCIONALMENTE

41 42 • • • • • • • • • • • • • • • • • • • • • • 43 44 • • • • • 45 46 1 Parte delantera del carro, izquierdo 113 Tapa de la tolva 1 2 Parte trasera del carro, izquierdo 114 Soporte del cable de alimentación 1 3 Parte delantera del carro, derecho 115 Comedero de grasa 1 4 Parte trasera del carro, derecho 116 Soporte de la bandeja de grasa 1 5.1 Conjunto de estante inferior del carrito 117.1 Conjunto de manija de barril 1 5.2 Insignia del estante inferior del carrito 117.2 Junta de manija de barril 2 6 Eje 117.3 Bisel de manija de barril 2 7 7" rueda 218 Gancho S 3 8 Cubierta de la rueda 219.1 Montaje de chimenea 1 9.1 Conjunto de manija de tapa 119.2 Junta de chimenea 1 9.2 Bisel de la manija de la tapa 220 Tapa de chimenea 1 10.1 Conjunto de cámara de combustión 121 Difusor 1 10.2 Conjunto de tapa 122 Bandeja de grasa 1 10.3 Bisagra de tapa 223 Grille de cuisson 2 10.4 Conjunto de eje de tapa 224 Grille chauffante 1 10.5 Junta de sellado de tapa A 225 Mesa frontal 1 10.6 Junta de sellado de tapa B 226 Soporte derecho de la mesa frontal 1 10.7 Insignia de tapa 127 Soporte izquierdo de la mesa delantera 1 10.8 Tapa interior 128 Revestimiento de papel de aluminio 1 10.9 Anillo de sellado de silicona 129 Cubo de grasa 1 11 Hopper Assembly 130 Sonda para carne 1 12 Extension de la trémie 1 Paquete de herrajes 1 47 48 1 Parte delantera del carro, izquierdo 113 Tapa de la tolva 1 2 Parte trasera del carro, izquierdo 114 Soporte del cable de alimentación 1 3 Parte delantera del carro, derecho 115 Comedero de grasa 1 4 Parte trasera del carro, derecho 116 Soporte de la bandeja de grasa 1 5.1 Conjunto de estante inferior del carrito 117.1 Conjunto de manija de barril 1 5.2 Insignia del estante inferior del carrito 117.2 Junta de manija de barril 2 6 Eje 117.3 Bisel de manija de barril 2 7 7" rueda 218 Gancho S 3 8 Cubierta de la rueda 219.1 Montaje de chimenea 1 9.1 Conjunto de manija de tapa 119.2 Junta de chimenea 1 9.2 Bisel de la manija de la tapa 220 Tapa de chimenea 1 10.1 Conjunto de cámara de combustión 121 Difusor 1 10.2 Conjunto de tapa 122 Bandeja de grasa 1 10.3 Bisagra de tapa 223 Grille de cuisson 3 10.4 Conjunto de eje de tapa 224 Grille chauffante 1 10.5 Junta de sellado de tapa A 225 Mesa frontal 1 10.6 Junta de sellado de tapa B 226 Soporte derecho de la mesa frontal 1 10.7 Insignia de tapa 127 Soporte izquierdo de la mesa delantera 1 10.8 Tapa interior 128 Revestimiento de papel de aluminio 1 10.9 Anillo de sellado de silicona 129 Cubo de grasa 1 11 Hopper Assembly 130 Sonda para carne 1 12 Extension de la trémie 1 Paquete de herrajes 1 49 H1 Carcasa de barrena 1H13 Buje de nailon para barrena 1 H2 Guardia de seguridad de la tolva 1H14 Pasador de corte 1 H3 Canal de descarga de pellets 1H15 Motor de barrena 1 H4 Junta de tolva 1H16 Soporte de mirilla 1 H5 Soporte de montaje de la tolva 1H17 Vista 1 H6 Conjunto de carcasa de tolva 1H18 El regulador 1 H7 Tornillo de pestillo de la puerta de evacuación 1H19 Marco del controlador 1 H8 Pestillo de la puerta de evacuación 1H20 Cable de alimentación 1 H9 Detectores de temperatura de resistencia 1H21 Ventilador 1 H10 Taladro 1H22 Alivio de tensión del cable de alimentación 1 H11 Crisol del fuego 1H23 Panel inferior de la tolva 1 H12 Encendedor 1 50 ° • • • • • • • • • • Todos los modelos de parrillas de pelletsGARANTÍAS Cámara de combustión y todos los componentes que no están cubiertos a continuación 5años Componentes eléctricos3años Rejillas de cocción3años 51 52 Cet appareil contient des émetteurs/récepteurs exemptés de licence qui sont conformes aux RSS exemptés de licence d’innovation, sciences et développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes: 1. Cet appareil ne peut pas causer d’interférences. 2. Cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un fonctionnement indésirable de l’appareil. 53 54 55 56 57 × 58 × 2 1 5 A 4 3 A 2 1 5 A 4 3 A

• • • • • • • • • • • • • • • • • • 21 22 °° °° °° °°  P1-P2 °F °C 23 °° °° 24 °° 25 °° • • • • • • • • • • • • • • • • ’ ’ • • • • • • 26 °° ’ 27 °° • • • • • 28 29 1Jambe, avant gauche113Couvercle de trémie1 2Jambe, arrière gauche114 Support de cordon d’alimentation 1 3Jambe, avant droit115Bac à graisse1 4Jambe, arrière droit116Support de bac à graisse1 5.1 Assemblage de la tablette inférieure du chariot 117.1 Assemblage de poignée de barillet 1 5.2 Insigne d'étagère inférieure de panier 117.2Joint de poignée de baril2 6Essieu117.3 Lunette de poignée de barillet 2 77” Roue218S Crochet3 8Enjoliveur de roue219.1Assemblage de cheminée1 9.1 Ensemble de poignée de couvercle 119.2Joint de cheminée1 9.2 Lunette de poignée de couvercle 220Chapeau de cheminée1 10.1 Assemblage de la chambre de combustion 121Diffusion1 10.2Assemblage du couvercle122Bac à graisse1 10.3Charnière du couvercle223Grille de cuisson2 10.4 Ensemble d'axe de couvercle 224Rack chauffant1 10.5 Joint d'étanchéité du couvercle A 225Table avant1 10.6 Joint d'étanchéité du couvercle B 226 Support droit de la table avant 1 10.7Insigne de couvercle127 Support gauche de table avant 1 10.8Couvercle intérieur128Doublure de foil1 10.9 Bague d'étanchéité en silicone 129Seau à graisse1 11Assemblage de trémies130Sonde de viande 1 12Extension de la trémie1L'emballage de vis1 30 31 1 Jambe, avant gauche 113 Couvercle de trémie 1 2 Jambe, arrière gauche 114 Support de cordon d’alimentation 1 3 Jambe, avant droit 115 Bac à graisse 1 4 Jambe, arrière droit 116 Support de bac à graisse 1 5.1 Assemblage de la tablette inférieure du chariot 117.1 Assemblage de poignée de barillet 1 5.2 Insigne d'étagère inférieure de panier 117.2 Joint de poignée de baril 2 6 Essieu 117.3 Lunette de poignée de barillet 2 7 7” Roue 218 S Crochet 3 8 Enjoliveur de roue 219.1 Assemblage de cheminée 1 9.1 Ensemble de poignée de couvercle 119.2 Joint de cheminée 1 9.2 Lunette de poignée de couvercle 220 Chapeau de cheminée 1 10.1 Assemblage de la chambre de combustion 121 Diffusion 1 10.2 Assemblage du couvercle 122 Bac à graisse 1 10.3 Charnière du couvercle 223 Grille de cuisson 3 10.4 Ensemble d'axe de couvercle 224 Rack chauffant 1 10.5 Joint d'étanchéité du couvercle A 225 Table avant 1 10.6 Joint d'étanchéité du couvercle B 226 Support droit de la table avant 1 10.7 Insigne de couvercle 127 Support gauche de table avant 1 10.8 Couvercle intérieur 128 Doublure de foil 1 10.9 Bague d'étanchéité en silicone 129 Seau à graisse 1 11 Assemblage de trémies 130 Sonde de viande 1 12 Extension de la trémie 1 L'emballage de vis 1 32 H1 Logement Auger 1H13 Bague en nylon pour tarière 1 H2 Garde-sécurité de la trémie 1H14 Goupille de cisaillement 1 H3 Goulotte de déchargement des pellets 1H15 Moteur Auger 1 H4 Joint de trémie 1H16 Support de verre de vue 1 H5 Support de montage de trémie 1H17 Lunette de vue 1 H6 Assemblage de la coque de la trémie 1H18 Contrôleur 1 H7 Vis de verrouillage de porte d’évacuation 1H19 Cadre du contrôleur 1 H8 Verrouillage de la porte d’évacuation 1H20 Cordon d’alimentation 1 H9 RTD 1H21 Ventilateur 1 H10 Tarière 1H22 Soulagement de la tension du cordon d'alimentation 1 H11 Pot de feu 1H23 Panneau inférieur de la trémie 1 H12 Allumeur 1 33 • • • • • • • • • • ’ ’ Tous les modèles de barbecue aux granulesGARANTIE Chambre de cuisson et composants non couverts ci-dessous5ans Composants électriques3ans Grilles de cuisson3ans 34 35 Cet appareil contient des émetteurs/récepteurs exemptés de licence qui sont conformes aux RSS exemptés de licence d’innovation, sciences et développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes: 1. Cet appareil ne peut pas causer d’interférences. 2. Cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un fonctionnement indésirable de l’appareil. • • • • • • 36 • • • • • • • • • • • • • • • • • • • • 37 • • • • • • • • • • • • • • • • • 38 39  P1-P2 °F °C 40

2 • • • • • • • • • • • • 3 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 5  P1-P2 °F °C 6 7 8 • • • • • • • • • • • • • • • • • • • • • • 9 ERROR CODEERROR DESCRIPTIONSOLUTION ER1 Firebox theromocouple sensor failure This error will occur when the thermocouple has lost connection to the controller due to a loose wire connection or failure of the thermocouple, which will require a replacement. ER2Ignition failure This error will occur when the grill fails to detect a temperature increase within 15 minutes of temperature set, indicating a failure to ignite. Ambient temperature, clogged auger tube, lack of pellets, ash build-up, etc. can impact ignition. Check the pellet feed system and restart the grill. ER3 High Temperature Limit Failure This error will occur when the grill temperature exceeds 675 °F ( 357 °C). Let the grill cool down, then turn off the grill. Restart the grill after clearing out the remaining pellets from the firebox. ER4 Low Temperature Limit Failure If the grill temperature falls too far below the set temperature, this code will appear. This can happen when grilling with the lid open. In that case, the user can clear the error code by pushing the control dial. If not cooking with the lid open, it may indicate that the igniter has gone out. In that case the user should shut down the grill and empty out the burn pot before restarting. ER5 Probe Communication Failure This error will occur if a temperature probe plugged into port P1 that has a set target temperature loses connection. Verify that the meat probe is properly connected to the controller. If problem persists, the probe will need to be replaced. ER9 Network Communication Failure If the controller was previously connected to the Wi-Fi network, this error indicates that the internet is not working and/or the connection to the Wi-Fi network has been disconnected. Restart your grill, make sure where you grill has a strong Wi-Fi signal. 10 • • • • • 11 12 1Leg, Front Left113 HopperLid 1 2Leg, Rear Left114PowerCordBracket1 3Leg, Front Right115Grase Trough1 4Leg, Rear Right116Grease Tray Bracket1 5.1CartBottomShelf Assembly117.1BarrelHandle Assembly1 5.2Cart Bottom Shelf Badge117.2BarrelHandleGasket2 6Axle117.3BarrelHandle Bezel 2 77”Wheel218S Hook3 8WheelCap219.1ChimneyAssembly1 9.1Lid Handle Assembly119.2Chimney Gasket1 9.2 Lid Handle Bezel 220ChimneyCap1 10.1Firebox Assembly121Diffuser1 10.2LidAssembly122Grease Tray1 10.3LidHinge223CookingGrid2 10.4LidAxleAssembly224WarmingRack1 10.5Lid Sealing Gasket A225FrontTable1 10.6Lid Sealing Gasket B226FrontTableRight Bracket1 10.7LidBadge127FrontTableLeft Bracket1 10.8LidInner128Foil Liner1 10.9SiliconeSealingRing129GreaseBucket1 11 HopperAssembly 130 MeatProbe1 12HopperExtension1Hardware1 13 14 1Leg, Front Left113 HopperLid 1 2Leg, Rear Left114PowerCordBracket1 3Leg, Front Right115Grase Trough1 4Leg, Rear Right116Grease Tray Bracket1 5.1CartBottomShelf Assembly117.1BarrelHandle Assembly1 5.2Cart Bottom Shelf Badge117.2BarrelHandleGasket2 6Axle117.3BarrelHandle Bezel 2 77”Wheel218S Hook3 8WheelCap219.1ChimneyAssembly1 9.1Lid Handle Assembly119.2Chimney Gasket1 9.2 Lid Handle Bezel 220ChimneyCap1 10.1Firebox Assembly121Diffuser1 10.2LidAssembly122Grease Tray1 10.3LidHinge223CookingGrid3 10.4LidAxleAssembly224WarmingRack1 10.5Lid Sealing Gasket A225FrontTable1 10.6Lid Sealing Gasket B226FrontTableRight Bracket1 10.7LidBadge127FrontTableLeft Bracket1 10.8LidInner128Foil Liner1 10.9SiliconeSealingRing129GreaseBucket1 11 HopperAssembly 130 MeatProbe1 12HopperExtension1Hardware1 15 H1Auger Housing1H13Auger Nylon Bushing1 H2 Hopper Safety Guard 1H14Shear Pin1 H3Pellet Discharge Chute1H15Auger Motor1 H4Hopper Gasket1H16Sight Glass Bracket1 H5Hopper Mounting Bracket1H17Sight Glass1 H6 Hopper Shell Assembly 1H18Controller1 H7Evacuation Door Latch Screw1H19Controller Frame1 H8Evacuation Door Latch1H20Power Cord1 H9RTD1H21Fan1 H10Auger1H22Power Cord Strain Relief1 H11Fire Pot1H23Hopper Bottom Panel1 H12Igniter1 16 • • • • • • • • • • All Pellet Grill ModelsWARRANTIES Firebox and all components not covered below5 years Electrical Components3 years Cooking grates3 years 17 18 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: any interference received, including interference that may cause undesired operation. Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. (1) This device may not cau…

Text truncated - open the document above for the full version.

Page 1 of 5 Report No.: LGT25G315 Appendix - Internal Photographs of EUT Constructional Details Model: 910-0509 Photo 1 Photo 2 Page 2 of 5 Report No.: LGT25G315 Appendix - Internal Photographs of EUT Constructional Details Photo 3 Photo 4 Page 3 of 5 Report No.: LGT25G315 Appendix - Internal Photographs of EUT Constructional Details Photo 5 Photo 6 ANT Page 4 of 5 Report No.: LGT25G315 Appendix - Internal Photographs of EUT Constructional Details Photo 7 Photo 8 Page 5 of 5 Report No.: LGT25G315 Appendix - Internal Photographs of EUT Constructional Details Photo 9 Photo 10

Page 1 of 2 Report No.: LGT25G315 Appendix - Test Setup photos Set-up for Radiated Spurious Emission, Below 1GHz Set-up for Radiated Spurious Emission, Above 1GHz Page 2 of 2 Report No.: LGT25G315 Set-up for Conducted Emission Set-up for Radio Spectrum

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Page 1 of 80 RF TEST REPORT Product Name: Oakford Pellet Grills Model Number: 910-0509, 910-0508 FCC ID: 2A3GE910-0509 Issued For : Nexgrill Industries, Inc 14050 Laurelwood Pl, Chino CA 91710 USA Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT25G315RF04 Sample Received Date: Aug. 11, 2025 Date of Test: Aug. 11, 2025 ~ Sep. 25, 2025 Date of Issue: Sep. 25, 2025 Report No.: LGT25G315RF04 Page 2 of 80 TEST REPORT CERTIFICATION Applicant: Nexgrill Industries, Inc Address: 14050 Laurelwood Pl, Chino CA 91710 USA Manufacturer: Nexgrill Industries, Inc Address: 14050 Laurelwood Pl, Chino CA 91710 USA Product Name: Oakford Pellet Grills Trademark: Nexgrill Model Number: 910-0509, 910-0508 Sample Status: Normal Serial Number: LGT2508132-1 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC Part 15.247, Subpart C ANSI C63.10-2020/Cor 1-2023 PASS Prepared by: Approved by: Zane Shan Vita Li Engineer Technical Director Report No.: LGT25G315RF04 Page 3 of 80 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 FREQUENCY HOPPING SYSTEM REQUIREMENTS 10 2.4 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 12 2.5 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 2.6 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 14 2.6 EQUIPMENTS LIST 15 3. EMC EMISSION TEST 17 3.1 CONDUCTED EMISSION MEASUREMENT 17 3.2 RADIATED EMISSION MEASUREMENT 23 4. CONDUCTED SPURIOUS & BAND EDGE EMISSION 39 4.1 LIMIT 39 4.2 TEST PROCEDURE 39 4.3 TEST SETUP 40 4.4 EUT OPERATION CONDITIONS 40 4.5 TEST RESULTS 40 5. NUMBER OF HOPPING CHANNEL 41 5.1 LIMIT 41 5.2 TEST PROCEDURE 41 5.3 TEST SETUP 41 5.4 EUT OPERATION CONDITIONS 41 5.5 TEST RESULTS 41 6. AVERAGE TIME OF OCCUPANCY 42 6.1 LIMIT 42 6.2 TEST PROCEDURE 42 6.3 TEST SETUP 42 6.4 EUT OPERATION CONDITIONS 42 6.5 TEST RESULTS 42 7. HOPPING CHANNEL SEPARATION MEASUREMEN 43 7.1 LIMIT 43 Report No.: LGT25G315RF04 Page 4 of 80 7.2 TEST PROCEDURE 43 7.3 TEST SETUP 43 7.4 EUT OPERATION CONDITIONS 43 7.5 TEST RESULTS 43 8. BANDWIDTH TEST 44 8.1 LIMIT 44 8.2 TEST PROCEDURE 44 8.3 TEST SETUP 44 8.4 EUT OPERATION CONDITIONS 44 8.5 TEST RESULTS 44 9. OUTPUT POWER TEST 45 9.1 LIMIT 45 9.2 TEST PROCEDURE 45 9.3 TEST SETUP 45 9.4 EUT OPERATION CONDITIONS 45 9.5 TEST RESULTS 45 10. DUTY CYCLE 46 10.1 STANDARD REQUIREMENT 46 10.2 TEST PROCEDURE 46 10.3 DEVIATION FROM STANDARD 46 10.4 TEST SETUP 46 10.5 TEST RESULTS 46 11. ANTENNA REQUIREMENT 47 11.1 STANDARD REQUIREMENT 47 11.2 EUT ANTENNA 47 APPENDIX I - TEST RESULTS 48 DUTY CYCLE 48 BANDWIDTH 52 MAXIMUM CONDUCTED OUTPUT POWER 59 CARRIER FREQUENCY SEPARATION 60 NUMBER OF HOPPING FREQUENCIES 62 TIME OF OCCUPANCY (DWELL TIME) 64 UNWANTED EMISSIONS IN NON-RESTRICTED FREQUENCY BANDS 67 APPENDIX II - MEASUREMENT PHOTOS 80 Report No.: LGT25G315RF04 Page 5 of 80 Revision History Rev. Issue Date Contents 00 Sep. 25, 2025 Initial Issue Report No.: LGT25G315RF04 Page 6 of 80 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247, Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247(a)(1) Hopping Channel Separation PASS -- 15.247(a)(1)&(b)(1) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247(d) Conducted Spurious & Band Edge Emission PASS -- 15.247(a)(1)(iii) Number of Hopping Frequency PASS -- 15.247(a)(1)(iii) Dwell Time PASS -- 15.247(a)(1) Bandwidth PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d) Part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020/Cor 1-2023. (3) The test data have all been compensated for cable loss, and when measuring the entire 30M-25G segment, the maximum loss value of the whole segment was used for compensation. Report No.: LGT25G315RF04 Page 7 of 80 1.1 TEST FACTORY Company Name: Shenzhen LGT Test Service Co., Ltd. Address: Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Accreditation Certificate FCC Registration No.: 746540 CAB ID: CN0136 Company Number: 28858 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 Occupied Channel Bandwidth ±0.46 % 2 RF Output Power, Conducted ±0.71dB 3 Power Spectral Density, Conducted ±1.57 dB 4 Unwanted Emission, Conducted ±0.63dB 5 Conducted emission ±2.80dB 6 All Emissions, Radiated (0.009-30MHz) ±2.16dB 7 All Emissions, Radiated (30MHz-1GHz) ±4.61dB 8 All Emissions, Radiated (1GHz-18GHz) ±5.49dB 9 Temperature ±0.5°C 10 Humidity ±2% 11 Duty Cycle ±2.3% Note: The measurement uncertainty is not included in the test result. Report No.: LGT25G315RF04 Page 8 of 80 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name: Oakford Pellet Grills Test Model Number: 910-0509 Series Number: 910-0508 Model Difference: 910-0508 is same as 910-0509 except size. Channel List: Please r…

Text truncated - open the document above for the full version.

LY22-008 REV1.0 客户名称： 产品名称： WiFi Antenna L=95mm MHF 产品料号： LY-P16-95 客户料号： 送样日期： 2021-8-16 工程确认： 核准工程制作签章 Approval Quality Engineer 客户确认： 核准研发品质签章 确认结果：□ 合格□ 不合格□ 其它 LY22-008 REV1.0 承认书项目表 ItemDescription 封面―――――――――――――――――― ――1 目录―――――――――――――――――― ――2 实物图―――――――――――――――――― ―3 电气参数――――――――――――――――― ―4 机械参数―――――――――――――――― ――4 使用和储存温度―――――――――――――― ―4 测试设备――――――――――――――――― ―4 结构尺寸图 ――――――――――――――――――5 可靠性实验―――――――――――――――― ―6 测试数据――――――――――――――― ―――7-9 2.67dBi LY22-008 REV1.0 结构尺寸图 LY22-008 REV1.0 环境与可靠性实验 项目实验条件性能要求试验 / 测试设备 低温储存温度-30°C±2°C/湿度 0％/RH/时间48H 试验后外观及功 能测试无影响 恒温恒湿试验机 高温高湿储存 温度 70 °C , 湿度 90~95 ％ /RH 时间 48H 试验后外观及功 能测试无影响 恒温恒湿试验机 温度冲击产品环境：-35°C放置 2H 转入 80°C放置 2H， 共进行 12 个循环 48H 试验后外观及功 能测试无影响 冷热冲击试验机 测试数据 回波损耗与驻波比( :2.4~2.5GHz ) Frequency ID1234567891011 Frequency (MHz)2400.02410.02420.02430.02440.02450.02460.02470.02480.02490.02500.0 Efficiency (dBi)-0.94-0.92-0.99-1.07-1.03-0.95-0.91-0.95-1.04-1.06-1.06 Gain (dBi)2.672.512.121.751.952.092.111.941.681.781.91 Efficiency (%)80.5780.9579.5778.2078.8480.2881.1480.4178.6378.2978.38 Directivity (dB)3.613.433.122.822.993.053.022.892.732.852.97 Peak Gain Position (Theta)75.0075.0075.0090.0090.0090.0090.0090.0090.0090.0090.00 Peak Gain Position (Phi)105.00105.00105.0060.0060.0060.0075.0060.0075.0075.0075.00 Efficiency ThetaPol (%)76.2776.9275.8374.6175.4577.0678.1377.6276.0375.8175.98 Efficiency PhiPol (%)4.304.033.743.583.393.223.012.792.602.482.40 Upper Hem. Efficiency (%)47.8249.2948.4646.3945.1845.5546.8046.9945.2243.4943.00 Lower Hem. Efficiency (%)32.7431.6631.1231.8133.6634.7234.3433.4233.4134.8035.38 VER7 T90(H)圆度3.773.713.593.343.122.882.732.622.542.442.27 Gain 15deg (dBi) E1(XZ)波瓣宽度73.0072.0075.0075.0074.0071.0070.0069.0079.0072.0069.00 E1(XZ)前后比4.064.404.504.825.195.525.906.025.685.576.00 E2(YZ)波瓣宽度64.0062.0061.0061.0064.0070.0069.0069.0067.0072.0069.00 E2(YZ)前后比5.145.205.285.034.754.755.185.385.315.235.67 最大增益处轴比(P)18.5218.8419.3927.2930.6936.3538.6031.7340.7745.2344.65 顶点(Theta=0)处轴比(P)10.3810.869.789.3810.8110.649.869.688.496.634.89 仰角10度最差(大)轴比(P)63.9163.5562.8778.3682.5365.2685.2863.5261.8161.1663.42 Hc(XY)波瓣宽度345.00346.00348.00353.00358.00360.00360.00360.00360.00360.00360.00 Hc(XY)前后比0.610.560.610.790.870.830.730.710.780.940.87 左旋圆极化效率(%)41.5741.0739.8939.3740.7242.5343.4442.5441.1141.2041.55 右旋圆极化效率(%)39.0039.8739.6838.8338.1237.7437.7037.8637.5237.0936.83 Empty max81.14 min78.20 78.20 81.14 0.00 10.00 20.00 30.00 40.00 50.00 60.00 70.00 80.00 90.00 100.00 2400.02410.02420.02430.02440.02450.02460.02470.02480.02490.02500.0 Efficiency (%)Max-Min 2.67 1.68 -1.50 -1.00 -0.50 0.00 0.50 1.00 1.50 2.00 2.50 3.00 2400.02410.02420.02430.02440.02450.02460.02470.02480.02490.02500.0 0.00 10.00 20.00 30.00 40.00 50.00 60.00 70.00 80.00 90.00 100.00 2400.02410.02420.02430.02440.02450.02460.02470.02480.02490.02500.0 Efficiency ThetaPol (%)Efficiency PhiPol (%) 0.00 10.00 20.00 30.00 40.00 50.00 60.00 70.00 80.00 90.00 100.00 2400.02410.02420.02430.02440.02450.02460.02470.02480.02490.02500.0 Upper Hem. Efficiency (%)Lower Hem. Efficiency (%) 2400.0MHz H+V, Eff: 80.6%Back View2400.0MHz Total(E1-XZ), Max= 1.52dBi2400.0MHz Total(E2-YZ), Max= 1.76dBiTotal(H-XY), Max= 2.24dBi, CirD=3.77 2.67 0.83 -1.01 -2.85 -4.69 -6.54 -8.38 -10.22 -12.06 -13.9 -15.75 -17.59 -19.43 -21.27 -23.11 -24.96 -26.8 -28.64 2410.0MHz H+V, Eff: 80.9%Back View2410.0MHz Total(E1-XZ), Max= 1.53dBi2410.0MHz Total(E2-YZ), Max= 1.68dBiTotal(H-XY), Max= 2.02dBi, CirD=3.71 2.51 0.67 -1.18 -3.02 -4.86 -6.7 -8.55 -10.39 -12.23 -14.07 -15.91 -17.76 -19.6 -21.44 -23.28 -25.12 -26.97 -28.81 2420.0MHz H+V, Eff: 79.6%Back View2420.0MHz Total(E1-XZ), Max= 1.26dBi2420.0MHz Total(E2-YZ), Max= 1.80dBiTotal(H-XY), Max= 1.76dBi, CirD=3.59 2.12 0.28 -1.56 -3.4 -5.24 -7.09 -8.93 -10.77 -12.61 -14.45 -16.3 -18.14 -19.98 -21.82 -23.66 -25.51 -27.35 -29.19 2430.0MHz H+V, Eff: 78.2%Back View2430.0MHz Total(E1-XZ), Max= 1.22dBi2430.0MHz Total(E2-YZ), Max= 1.57dBiTotal(H-XY), Max= 1.75dBi, CirD=3.34 1.75 -0.09 -1.93 -3.77 -5.61 -7.46 -9.3 -11.14 -12.98 -14.82 -16.67 -18.51 -20.35 -22.19 -24.04 -25.88 -27.72 -29.56 2440.0MHz H+V, Eff: 78.8%Back View2440.0MHz Total(E1-XZ), Max= 1.41dBi2440.0MHz Total(E2-YZ), Max= 1.25dBiTotal(H-XY), Max= 1.95dBi, CirD=3.12 1.95 0.11 -1.73 -3.57 -5.41 -7.26 -9.1 -10.94 -12.78 -14.62 -16.47 -18.31 -20.15 -21.99 -23.84 -25.68 -27.52 -29.36 2450.0MHz H+V, Eff: 80.3%Back View2450.0MHz Total(E1-XZ), Max= 1.68dBi2450.0MHz Total(E2-YZ), Max= 1.12dBiTotal(H-XY), Max= 2.09dBi, CirD=2.88 2.09 0.25 -1.59 -3.43 -5.28 -7.12 -8.96 -10.8 -12.64 -14.49 -16.33 -18.17 -20.01 -21.85 -23.7 -25.54 -27.38 -29.22 2460.0MHz H+V, Eff: 81.1%Back View2460.0MHz Total(E1-XZ), Max= 1.83dBi2460.0MHz Total(E2-YZ), Max= 1.29dBiTotal(H-XY), Max= 2.11dBi, CirD=2.73 2.11 0.27 -1.57 -3.41 -5.26 -7.1 -8.94 -10.78 -12.62 -14.47 -16.31 -18.15 -19.99 -21.83 -23.68 -25.52 -27.36 -29.2 2470.0MHz H+V, Eff: 80.4%Back View2470.0MHz Total(E1-XZ), Max= 1.69dBi2470.0MHz Total(E2-YZ), Max= 1.34dBiTotal(H-XY), Max= 1.94dBi, CirD=2.62 1.94 0.1 -1.74 -3.58 -5.43 -7.27 -9.11 -10.95 -12.79 -14.64 -16.48 -18.32 -20.16 -22 -23.85 -25.69 -27.53 -29.37 2480.0MHz H+V, Eff: 78.6%Back View2480.0MHz Total(E1-XZ), Max= 1.36dBi2480.0MHz Total(E2-YZ), Max= 1.16dBiTotal(H-XY), Max= 1.68dBi, CirD=2.54 1.68 -0.16 -2 -3.84 -5.68 -7.53 -9.37 -11.21 -13.05 -14.9 -16.74 -18.58 -20.42 -22.26 -24.11 -25.95 -27.79 -29.63 2490.0MHz H+V, Eff: 78.3%Back View2490.0MHz Total(E1-XZ), Max= 1.32dBi2490.0MHz Total(E2-YZ), Max= 1.11dBiTotal(H-XY), Max= 1.78dBi, CirD=2.44 1.78 -0.06 -1.9 -3.74 -5.58 -7.43 -9.27 -11.11 -12.95 -14.79 -16.64 -18.48 -20.32 -22.16 -24 -25.85 -27.69 -29.53 2500.0MHz H+V, Eff: 78.4%Back View2500.0MHz Total(E1-XZ), Max= 1.51dBi2500.0MHz Total(E2-YZ), Max= 1.21dBiTotal(H-XY), Max= 1.91dBi, CirD=2.27 1.91 0.07 -1.77 -3.62 -5.46 -7.3 -9.14 -10.98 -12.83 -14.67 -16.51 -18.35 -20.19 -22.04 -23.88 -25.72 -27.56 -29.41

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Page 1 of 8 EMF TEST REPORT Product Name: Oakford Pellet Grills Model Number: 910-0509, 910-0508 FCC ID: 2A3GE910-0509 Issued For : Nexgrill Industries, Inc 14050 Laurelwood Pl, Chino CA 91710 USA Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT25G315HA02 Sample Received Date: Aug. 11, 2025 Date of Test: Aug. 11, 2025 ~ Sep. 25, 2025 Date of Issue: Sep. 25, 2025 Report No.: LGT25G315HA02 Page 2 of 8 TEST REPORT CERTIFICATION Applicant: Nexgrill Industries, Inc Address: 14050 Laurelwood Pl, Chino CA 91710 USA Manufacturer: Nexgrill Industries, Inc Address: 14050 Laurelwood Pl, Chino CA 91710 USA Product Name: Oakford Pellet Grills Trademark: Nexgrill Model Number: 910-0509, 910-0508 Sample Status: Normal APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47 CFR §2.1091 KDB 447498 D01 General RF Exposure Guidance v06 PASS Prepared by: Approved by: Zane Shan Vita Li Engineer Technical Director Report No.: LGT25G315HA02 Page 3 of 8 TABLE OF CONTENTS 1 . GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST LABORATORY 5 2 . FCC 47CFR §2.1091 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 EUT OPERATION CONDITION 7 2.4 CLASSIFICATION 7 2.5 TEST RESULT 8 Report No.: LGT25G315HA02 Page 4 of 8 Revision History Rev. Issue Date Revisions 00 Sep. 25, 2025 Initial Issue Report No.: LGT25G315HA02 Page 5 of 8 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name: Oakford Pellet Grills Test Model Number: 910-0509 Series Number: 910-0508 Model Difference: 910-0508 is same as 910-0509 except size. Frequency Bands: Bluetooth 2402-2480MHz 2.4G WLAN 802.11b/g/n(20MHz): 2412~2462 MHz 802.11n (40MHz):2422~2452MHz Rating: Input: AC 120V/60Hz Hardware Version: V01 Software Version: V01 1.2 TEST LABORATORY Company Name: Shenzhen LGT Test Service Co., Ltd. Address: Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Accreditation Certificate: FCC Registration No.: 746540 CAB ID: CN0136 Report No.: LGT25G315HA02 Page 6 of 8 2. FCC 47CFR §2.1091 REQUIREMENT 2.1 TEST STANDARDS The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The gain of the antennas used in the product is extra…

Text truncated - open the document above for the full version.