2A3GJ-ANBK-01Actto Wireless/Bluetooth type Number-Keypad

NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

ShanghaiActtoPlasticsCo.,Ltd. 1F18B/L,FashionValleyCreativePark,618-1,DingyuanRd.,Songjiang,ShanghaiCity,China V02072023 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:February8,2023 Ref:AttestationStatementPart2.911(d)(7)Filing FCCID:2A3GJ-ANBK-01 Model:ANBK-01 ShanghaiActtoPlasticsCo.,Ltd..certifiesthat,asofthedatesofthisapplication,Americas ComplianceConsultingLLCdbaiCertifiisourdesignatedU.S.agentforserviceofprocessforthe abovereferencedFCCID.ShanghaiActtoPlasticsCo.,Ltd.acceptstomaintainanagentforno lessthanoneyearafterthegranteehasterminatedallmarketingandimportationorthe conclusionofanycommission-relatedproceedinginvolvingtheequipment. AmericasComplianceConsultingLLCdbaiCertifiaccepts,asofthedateofthefilingofthe application,theobligationofthedesignatedU.S.agentforserviceprocessfortheabove referencedFCCID. DesignatedU.S.AgentInformation: Name:AmericasComplianceconsulting,LLCdbaiCertifi Address:1001SWDiskDrive,ste250,Office3,Bend,OR97702,UnitedStates ContactPerson:PaulPreston Tel:(866)885-4575 Email:[email protected] FRN:0033399411 Sincerely, ShanghaiActtoPlasticsCo.,Ltd. AmericasComplianceConsultingLLCdba iCertifi SOBYUNGKOO PaulPreston

Shanghai Actto Plastics Co., Ltd. Agent Authorization Company: Shanghai Actto Plastics Co., Ltd. Address: 1F 18B/L, Fashion Valley Creative Park, 618-1, Dingyuan Rd., Songjiang, Shanghai City, China Product Name: Actto Wireless/Bluetooth type Number-Keypad Model Number(s): ANBK-01 Product Description: Actto Wireless/Bluetooth type Number-Keypad We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-01-14 Name: SO BYUNG KOO Company: Shanghai Actto Plastics Co., Ltd.

Page 1 of 39 FCC Test Report Report No.: AGC13300221202FE03 FCC ID : 2A3GJ-ANBK-01 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Actto Wireless/Bluetooth type Number-Keypad BRAND NAME : ACTTO MODEL NAME : ANBK-01 APPLICANT : Shanghai Actto Plastics Co., Ltd. DATE OF ISSUE : Jan. 06, 2023 STANDARD(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC13300221202FE03 Page 2 of 39 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jan. 06, 2023 Valid Initial Release Report No.: AGC13300221202FE03 Page 3 of 39 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE .................................................................................................................. 4 2. GENERAL INFORMATION .............................................................................................................................. 5 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 5 2.2. TABLE OF CARRIER FREQUENCYS ....................................................................................................... 5 2.3. RELATED SUBMITTAL(S)/GRANT(S) ....................................................................................................... 6 2.4. TEST METHODOLOGY ............................................................................................................................. 6 2.5. SPECIAL ACCESSORIES .......................................................................................................................... 6 2.6. EQUIPMENT MODIFICATIONS ................................................................................................................. 6 2.7. ANTENNA REQUIREMENT ....................................................................................................................... 6 3. MEASUREMENT UNCERTAINTY ................................................................................................................... 7 4. DESCRIPTION OF TEST MODES ................................................................................................................... 8 5. SYSTEM TEST CONFIGURATION .................................................................................................................. 9 5.1. CONFIGURATION OF TESTED SYSTEM ................................................................................................. 9 5.2. EQUIPMENT USED IN TESTED SYSTEM ................................................................................................ 9 5.3. SUMMARY OF TEST RESULTS ................................................................................................................ 9 6. TEST FACILITY .............................................................................................................................................. 10 7. PEAK OUTPUT POWER ................................................................................................................................ 11 7.1. MEASUREMENT PROCEDURE .............................................................................................................. 11 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 11 7.3. LIMITS AND MEASUREMENT RESULT .................................................................................................. 12 8. BANDWIDTH .................................................................................................................................................. 14 8.1. MEASUREMENT PROCEDURE .............................................................................................................. 14 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 14 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................... 14 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 18 9.1. MEASUREMENT PROCEDURE .............................................................................................................. 18 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 18 9.3. MEASUREMENT EQUIPMENT USED .................................................................................................... 18 9.4. LIMITS AND MEASUREMENT RESULT .................................................................................................. 18 10. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY ........................................................ 25 10.1. MEASUREMENT PROCEDURE ............................................................................................................ 25 10.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................. 25 10.3. MEASUREMENT EQUIPMENT USED .................................................................................................. 25 10.4. LIMITS AND MEASUREMENT RESULT................................................................................................ 25 11. RADIATED EMISSION ................................................................................................................................. 27 11.1. MEASUREMENT PROCEDURE ............................................................................................................ 27 11.2. TEST SETUP .......................................................................................................................................... 28 11.3. LIMITS AND MEASUREMENT RESULT................................................................................................ 29 1…

Text truncated - open the document above for the full version.

Page 1 of 39 FCC Test Report Report No.: AGC13300221202FE02 FCC ID : 2A3GJ-ANBK-01 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Actto Wireless/Bluetooth type Number-Keypad BRAND NAME : ACTTO MODEL NAME : ANBK-01 APPLICANT : Shanghai Actto Plastics Co., Ltd. DATE OF ISSUE : Jan. 06, 2023 STANDARD(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC13300221202FE02 Page 2 of 39 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jan. 06, 2023 Valid Initial Release Report No.: AGC13300221202FE02 Page 3 of 39 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE .................................................................................................................. 4 2. GENERAL INFORMATION .............................................................................................................................. 5 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 5 2.2. TABLE OF CARRIER FREQUENCYS ....................................................................................................... 5 2.3. RELATED SUBMITTAL(S)/GRANT(S) ....................................................................................................... 6 2.4. TEST METHODOLOGY ............................................................................................................................. 6 2.5. SPECIAL ACCESSORIES .......................................................................................................................... 6 2.6. EQUIPMENT MODIFICATIONS ................................................................................................................. 6 2.7. ANTENNA REQUIREMENT ....................................................................................................................... 6 3. MEASUREMENT UNCERTAINTY ................................................................................................................... 7 4. DESCRIPTION OF TEST MODES ................................................................................................................... 8 5. SYSTEM TEST CONFIGURATION .................................................................................................................. 9 5.1. CONFIGURATION OF TESTED SYSTEM ................................................................................................. 9 5.2. EQUIPMENT USED IN TESTED SYSTEM ................................................................................................ 9 5.3. SUMMARY OF TEST RESULTS ................................................................................................................ 9 6. TEST FACILITY .............................................................................................................................................. 10 7. PEAK OUTPUT POWER ................................................................................................................................ 11 7.1. MEASUREMENT PROCEDURE .............................................................................................................. 11 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 11 7.3. LIMITS AND MEASUREMENT RESULT .................................................................................................. 12 8. BANDWIDTH .................................................................................................................................................. 14 8.1. MEASUREMENT PROCEDURE .............................................................................................................. 14 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 14 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................... 14 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 18 9.1. MEASUREMENT PROCEDURE .............................................................................................................. 18 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 18 9.3. MEASUREMENT EQUIPMENT USED .................................................................................................... 18 9.4. LIMITS AND MEASUREMENT RESULT .................................................................................................. 18 10. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY ........................................................ 25 10.1. MEASUREMENT PROCEDURE ............................................................................................................ 25 10.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................. 25 10.3. MEASUREMENT EQUIPMENT USED .................................................................................................. 25 10.4. LIMITS AND MEASUREMENT RESULT................................................................................................ 25 11. RADIATED EMISSION ................................................................................................................................. 27 11.1. MEASUREMENT PROCEDURE ............................................................................................................ 27 11.2. TEST SETUP .......................................................................................................................................... 28 11.3. LIMITS AND MEASUREMENT RESULT................................................................................................ 29 1…

Text truncated - open the document above for the full version.

Page 1 of 16 Antenna Test Report Report No.: AGC13300221202PA01 PRODUCT DESIGNATION : Actto Wireless/Bluetooth type Number-Keypad BRAND NAME : ACTTO MODEL NAME : ANBK-01 APPLICANT : Shanghai Actto Plastics Co., Ltd. DATE OF ISSUE : Jan. 06, 2023 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC13300221202PA01 Page 2 of 16 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jan. 06, 2023 Valid Initial release Report No.: AGC13300221202PA01 Page 3 of 16 TABLE OF CONTENTS 1. PRODUCT INFORMATON ...................................................................................................................... 4 2. TEST FACILITY ....................................................................................................................................... 5 3. TEST EQUIPMENT LIST ......................................................................................................................... 5 4. MEASUREMENT UNCERTAINTY .......................................................................................................... 5 5. TEST SUMMARY LIST ............................................................................................................................ 5 6. TEST SETUP ........................................................................................................................................... 6 7. TEST RESULTS ....................................................................................................................................... 7 7.1. VSWR ................................................................................................................................................ 7 7.2. GAIN AND EFFICIENCY ................................................................................................................... 8 7.3. RADIATION PATTERN ...................................................................................................................... 9 APPENDIX A: PHOTOGRAPHS OF TEST SETUP .................................................................................. 11 APPENDIX B: PHOTOGRAPHS OF EUT ................................................................................................ 12 Report No.: AGC13300221202PA01 Page 4 of 16 1. PRODUCT INFORMATON General information Applicant Shanghai Actto Plastics Co., Ltd. Address 1F 18B/L, Fashion Valley Creative Park, 618-1, Dingyuan Rd., Songjiang, Shanghai City, China Manufacturer Shanghai Actto Plastics Co., Ltd. Address 1F 18B/L, Fashion Valley Creative Park, 618-1, Dingyuan Rd., Songjiang, Shanghai City, China Factory DONGGUAN ACTTO ELECTRONIC TECHNOLOGY CO., LTD Address Room201,1st Building of No. 18, Hengli Shikeng Road,Hengli Shikeng Road,Hengli Town, Dongguan City.Guangdong Province of China Product Designation Actto Wireless/Bluetooth type Number-Keypad Brand Name ACTTO Test Model ANBK-01 Date of receipt of test item Dec. 08, 2022 Date of test Dec. 08, 2022 to Jan. 06, 2023 Report Template AGCRT-ER-PA/V1.0 Technical information Frequency Range 2400MHz-2500MHz Test Frequencies 2400MHz, 2410MHz, 2420MHz, 2430MHz, 2440MHz, 2450MHz, 2460MHz, 2470MHz, 2480MHz, 2490MHz, 2500MHz Antenna Type PCB Antenna Dimensions 11mm*5mm Impedance 50Ω Maximum test values Gain: -2.024dBi; Efficiency: 4.470%; VSWR: 1.162:1 The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The test results of this report relate only to the tested sample identified in this report. Prepared By Thea Huang (Project Engineer) Jan. 06, 2023 Reviewed By Calvin Liu (Reviewer) Jan. 06, 2023 Approved By Max Zhang (Authorized Officer) Jan. 06, 2023 Report No.: AGC13300221202PA01 Page 5 of 16 2. TEST FACILITY 3. TEST EQUIPMENT LIST Equipment Manufacturer Model Cal. Date Cal. Due Antenna Measurement System ETS-Lindgren AMS-8600 Nov. 25, 2022 Nov. 28, 2023 Network Analyzer R&S 101443 Oct. 15, 2022 Oct. 14, 2023 Test Software ETS-Lindgren EMQuest Ver V1.12 N/A 4. MEASUREMENT UNCERTAINTY The uncertainty is calculated using the methods suggested in the “Guide to the Expression of Uncertainty in measurement” (GUM) published by CISPR and ANSI. - Uncertainty of VSWR, Uc = ±1.5dB - Uncertainty of Gain, Uc = ±0.8dB 5. TEST SUMMARY LIST NO. Test item Remark 1 VSWR -- 2 Gain and efficiency -- 3 Radiation pattern -- Test Site Attestation of Global Compliance (Shenzhen) Co., Ltd Location 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Report No.: AGC13300221202PA01 Page 6 of 16 6. TEST SETUP Report No.: AGC13300221202PA01 Page 7 of 16 7. TEST RESULTS 7.1. VSWR Frequency(MHz) VSWR 2402 1.146:1 2440 1.162:1 2450 1.149:1 2480 1.084:1 Report No.: AGC13300221202PA01 Page 8 of 16 7.2. GAIN AND EFFICIENCY Frequency(MHz) Efficiency(dB) Efficiency(%) Gain(dBi) 2400 -15.485 2.827 -2.024 2410 -15.291 2.957 -2.264 2420 -15.161 3.047 -2.800 2430 -14.704 3.384 -3.153 2440 -14.429 3.606 -3.238 2450 -14.284 3.728 -3.154 2460 -14.231 3.774 -3.745 2470 -14.145 3.849 -4.516 2480 -13.836 4.133 -5.417 2490 -13.625 4.339 -6.355 2500 -13.496 4.470 -5.888 Report No.: AGC13300221202PA01 Page 9 of 16 7.3. RADIATION PATTERN 2D POLAR RADIATION PATTERN FREQUENCY=2400MHZ FREQUENCY=2450MHZ FREQUENCY=2500MHZ Report No.: AGC13300221202PA01 Page 10 of 16 3D RADIATION PATTERN FREQUENCY=2400MHZ FREQUENCY=2450MHZ FREQUENCY=2500MHZ Report No.: AGC13300221202PA01 Page 11 of 16 APPENDIX A: PHOTOGRAPHS OF TEST SETUP Report No.: AGC13300221202PA01 Page 12 of 16 APPENDIX B: PHOTOGRAPHS OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC13300221202PA01 Page 13 of 16 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC13300221202PA01 Page 14 of 16 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: AGC13300221202PA01 Page 15 of 16 OPEN VIEW OF EUT-1 OPEN VIEW OF EUT-2 Report No.: AGC13300221202PA01 Page 16 of 16 INTERNAL VIEW OF EUT-1 INTERNAL VIEW OF EUT-2 ---…

Text truncated - open the document above for the full version.

Report No.: AGC13300221202AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC13300221202AP01 Page 2 of 2 RF CONDUCTED TEST SETUP ****************************************End of Report*************************************