
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Blue LED on/ Green LED flashes 3 times LED Charge Meter Press once Wireless Charging Activated One blue LED: 1-25% Charged Two blue LEDs: 25-50% Charged Three blue LEDs: 50-75% Charged Four blue LEDs: 75-100% Charged The first blue LED flashes Green LED stay on Power off the Powerbank *The LED lights are an approximate representation of the available battery power Low battery warning Wireless Charging Press twice 1 × 12in USB-C to USB-C Cable 1 × Magnetic powerbank 1 × 12in USB-C to 3 in 1 (Lightning / Micro USB / USB-C) Cable 2 × Metal label sticker LED In dicator USB-C Port (Output & Input) Foldable Stand Power Button Wireless Power Transmission Area 1 2 3 4 5 1 2 3 4 5 FCC WARNING This devic e complie s wit h part 15 of the FCC Rules. Operat io n is subject t o the follo wing two condit ions: (1) this devic e may not cause harmful interference, an d (2) this devic e must accept an y interference received, in cluding interference that may cause undesire d operation. Any changes or modifications not expressly approved by the party responsib le for compliance could void the user's authorit y t o operate the equipment. NOTE: This equipment has been tested and found t o comply wit h the lim it s for a Class B digita l device, pursuant t o Part 15 of the FCC Rules. These limit s are designed t o provide reasonable protectio n against harmful interference in a residential installation. This equipment generates, uses and can radiat e radio frequency energy and, if not install ed and used in accordan ce wit h the instructions, may cause harmful interference t o radio communications. However, there is no guarantee that interference wil l not occur i n a particula r installat ion. If this equipment does cause harmful interference t o radio or television reception, whic h can be determined by turnin g the equipment o ff and on, the user is encouraged t o t ry to correct the interference by one or more of t h e following measures: -- Reorient o r relocate the receiv in g antenna. -- Increase the separat io n between the equipment and receiver. -- Connect the equipment into an outle t o n a circuit different from that t o whic h the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Shenzhen X-nego Industrial Co., LTD Model Difference 2022/02/26 EUT NAME: Rush Charge 5000mAh Mc Wireless Powerbank Trademark: RUSH CHARGE MODEL : RCM50-G1-BLCK,RCM50-G1-WHTE,RCM50-G1-ALGN, XRC50 FCC ID: 2A3UQRCM50-G1-BLCK All the model are the same circuit and RF module, except model names. Sincerely Client’s signature Client’s signature: Client’s name / title : He Tianwei / MANAGER Contact information / address: 9A Building A2 Lilang International Jewelry Park, Nanwan Street LongGang District ,Shenzhen City, China
Shenzhen X-nego Industrial Co., LTD 2022.11.25 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Rush Charge 5000mAh Mc Wireless Powerbank Trademark: RUSH CHARGE MODEL : RCM50-G1-BLCK,RCM50-G1-WHTE,RCM50-G1-ALGN,XRC50 FCC ID: 2A3UQRCM50-G1-BLCK To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : He Tianwei / MANAGER Contact information / address: 9A Building A2 Lilang International Jewelry Park, Nanwan Street LongGang District ,Shenzhen City, China
Shenzhen X-nego Industrial Co., LTD 2022.11.25 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION EUT NAME: Rush Charge 5000mAh Mc Wireless Powerbank Trademark: RUSH CHARGE MODEL : RCM50-G1-BLCK,RCM50-G1-WHTE,RCM50-G1-ALGN,XRC50 FCC ID: 2A3UQRCM50-G1-BLCK To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : He Tianwei / MANAGER Contact information / address: 9A Building A2 Lilang International Jewelry Park, Nanwan Street LongGang District ,Shenzhen City, China
External Photos
Size:40*20mm FCC ID: 2A3UQRCM50-G1-BLCK Label location
Internal Photos Antenna
No.:BCTC/RF-EMC-005 Page 1 of 23 Edition:A.5 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2211813702-2E Applicant: Shenzhen X-nego Industrial Co., LTD Product Name: Rush Charge 5000mAh Mc Wireless Powerbank Model/Type Ref.: RCM50-G1-BLCK Tested Date: 2022-11-11 to 2022-11-16 Issued Date: 2022-11-16 Report No.: BCTC2211813702-2E No.:BCTC/RF-EMC-005 Page 2 of 23 Edition:A.5 FCC ID: 2A3UQRCM50-G1-BLCK The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: Rush Charge 5000mAh Mc Wireless Powerbank Trademark: RUSH CHARGE Model/Type Ref.: RCM50-G1-BLCK RCM50-G1-WHTE, RCM50-G1-ALGN, XRC50 Prepared For: Shenzhen X-nego Industrial Co., LTD Address: 9A Building A2 Lilang International Jewelry Park, Nanwan Street LongGang District, Shenzhen City, China Manufacturer: Shenzhen X-nego Industrial Co., LTD Address: 9A Building A2 Lilang International Jewelry Park, Nanwan Street LongGang District, Shenzhen City, China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2022-11-11 Sample tested Date: 2022-11-11 to 2022-11-16 Issue Date: 2022-11-16 Report No.: BCTC2211813702-2E Test Standards: FCC CFR 47 part1, 1.1307(b), 1.1310 Test Results: PASS Tested by: Approved by: Brave Zeng/ Project Handler Zero Zhou/Reviewer Report No.: BCTC2211813702-2E No.:BCTC/RF-EMC-005 Page 3 of 23 Edition:A.5 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Product Information ............................................................................................... 5 2.1 Product Information ............................................................................................... 5 2.2 Support Equipment ............................................................................................... 5 2.3 Test Mode ............................................................................................................. 5 3. Test Facility And Test Instrument Used ................................................................. 7 3.1 Test Facility ........................................................................................................... 7 3.2 Test Instrument Used ............................................................................................ 7 4. Method Of Measurement ....................................................................................... 8 4.1 Applicable Standard .............................................................................................. 8 4.2 Block Diagram Of Test Setup ................................................................................ 8 4.3 Limit ...................................................................................................................... 9 4.4 Test Procedure ..................................................................................................... 9 4.5 Equipment Approval Considerations ................................................................... 10 4.9 E And H Field Strength ....................................................................................... 11 5. Photographs Of Test Set-Up ............................................................................... 17 (Note: N/A Means Not Applicable) Report No.: BCTC2211813702-2E No.:BCTC/RF-EMC-005 Page 4 of 23 Edition:A.5 1. Version Report No. Issue Date Description Approved BCTC2211813702-2E 2022-11-16 Original Valid Report No.: BCTC2211813702-2E No.:BCTC/RF-EMC-005 Page 5 of 23 Edition:A.5 2. Product Information 2.1 Product Information Model/Type Ref.: RCM50-G1-BLCK RCM50-G1-WHTE, RCM50-G1-ALGN, XRC50 Model differences: All the model are the same circuit and RF module, except model names. Product Description: Rush Charge 5000mAh Wireless Power bank Operation Frequency: 115kHz-205kHz Antenna installation: loop coil antenna Ratings: Type-C Input: 5V/2.5A;9V/2.0A;12V/1.5A Type-C Output:5V/3A;9V/2.2A;12V/1.67A Wireless Output:5W,7.5W,10W Hardware Version: N/A Software Version: N/A Cable of Product No. Cable Type Quantity Provider Length (m) Shielded Note 1 -- -- Applicant --- Yes/No With a ferrite ring in mid Detachable 2 -- -- BCTC -- Yes/No -- 2.2 Support Equipment No. Device Type Brand Model Series No. Note 1. Wireless load --- --- --- auxiliary 2. Adapter --- BCTC001 --- auxiliary Notes: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. 2.3 Test Mode Test Modes 1 Charging(5V 2.5A)+Wireless(5W) Test Modes 2 Charging(5V 2.5A)+Wireless(7.5W) Test Modes 3 Charging(5V 2.5A)+Wireless(10W) Test Modes 4 Charging(9V 2A)+Wireless(5W) Test Modes 5 Charging(9V 2A)+Wireless(7.5W) Test Modes 6 Charging(9V 2A)+Wireless(10W) Test Modes 7 Charging(12V 1.5A)+Wireless(5W) Test Modes 8 Charging(12V 1.5A)+Wireless(7.5W) Test Modes 9 Charging(12V 1.5A)+Wireless(10W) Test Modes 10 Wireless Charging(5W) Report No.: BCTC2211813702-2E No.:BCTC/RF-EMC-005 Page 6 of 23 Edition:A.5 Test Modes 11 Wireless Charging(7.5W) Test Modes 12 Wireless Charging(10W) Report No.: BCTC2211813702-2E No.:BCTC/RF-EMC-005 Page 7 of 23 Edition:A.5 3. Test Facility And Test Instrument Used 3.1 Test Facility All measurement facilities used to collect the measurement data are located at Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, …
Text truncated - open the document above for the full version.
三.电路图/CIRCUIT DIAGRAM unit: MM OUTSIDE DIAGRA Note: Wrap 8MM (ref) high-temperature adhesive paper around the coil outlet position, and attach double-sided adhesive on the back of magnetic sheet. A B C D E F G number of turns STD 43.5± 0.5 38.5±0.5 20.5±0.5 5.3±0.5 40±2 3±1 1.6±0.5 10TS Shenzhen Ruitong Qianye Technology Co., LTD 301, Building A4, Xinwei Fourth Industrial Zone, Xinzhuang Community, Matan Street, Guangming District, Shenzhen unit: MM R=BMM
No.:BCTC/RF-EMC-005 Page 1 of 26 Edition:A.5 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2211813702-1E Applicant: Shenzhen X-nego Industrial Co., LTD Product Name: Rush Charge 5000mAh Mc Wireless Powerbank Model/Type Ref.: RCM50-G1-BLCK Tested Date: 2022-11-11 to 2022-11-16 Issued Date: 2022-11-16 Report No.: BCTC2211813702-1E No.:BCTC/RF-EMC-005 Page 2 of 26 Edition:A.5 FCC ID: 2A3UQRCM50-G1-BLCK The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: Rush Charge 5000mAh Mc Wireless Powerbank Trademark: RUSH CHARGE Model/Type Ref.: RCM50-G1-BLCK RCM50-G1-WHTE, RCM50-G1-ALGN, XRC50 Prepared For: Shenzhen X-nego Industrial Co., LTD Address: 9A Building A2 Lilang International Jewelry Park, Nanwan Street LongGang District, Shenzhen City, China Manufacturer: Shenzhen X-nego Industrial Co., LTD Address: 9A Building A2 Lilang International Jewelry Park, Nanwan Street LongGang District, Shenzhen City, China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2022-11-11 Sample tested Date: 2022-11-11 to 2022-11-16 Issue Date: 2022-11-16 Report No.: BCTC2211813702-1E Test Standards: FCC Part15.209 ANSI C63.10-2013 Test Results: PASS Tested by: Approved by: Brave Zeng/ Project Handler Zero Zhou/Reviewer Report No.: BCTC2211813702-1E No.:BCTC/RF-EMC-005 Page 3 of 26 Edition:A.5 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Test Summary ....................................................................................................... 5 3. Measurement Uncertainty ..................................................................................... 6 4. Product Information And Test Setup ..................................................................... 7 4.1 Product Information ............................................................................................... 7 4.2 Support Equipment ............................................................................................... 7 4.3 Test Setup Configuration ...................................................................................... 7 4.4 Test Mode ............................................................................................................. 8 5. Test Facility And Test Instrument Used ................................................................. 9 5.1 Test Facility ........................................................................................................... 9 5.2 Test Instrument Used ............................................................................................ 9 6. Conducted Emissions .......................................................................................... 11 6.1 Block Diagram Of Test Setup .............................................................................. 11 6.2 Limit .................................................................................................................... 11 6.3 Test Procedure ................................................................................................... 11 6.4 EUT Operating Conditions .................................................................................. 11 6.5 Test Result .......................................................................................................... 12 7. Radiated Emissions ............................................................................................. 14 7.1 Block Diagram Of Test Setup .............................................................................. 14 7.2 Limit .................................................................................................................... 15 7.3 Test Procedure ................................................................................................... 15 7.4 Test Result .......................................................................................................... 16 8. Bandwidth Test .................................................................................................... 20 9. Antenna Requirements ........................................................................................ 22 10. EUT Photographs ................................................................................................ 23 11. EUT Test Setup Photographs.............................................................................. 24 (Note: N/A Means Not Applicable) Report No.: BCTC2211813702-1E No.:BCTC/RF-EMC-005 Page 4 of 26 Edition:A.5 1. Version Report No. Issue Date Description Approved BCTC2211813702-1E 2022-11-16 Original Valid Report No.: BCTC2211813702-1E No.:BCTC/RF-EMC-005 Page 5 of 26 Edition:A.5 2. Test Summary The Product has been tested according to the following specifications: No. Test Parameter Clause No Results 1 Conducted Emission 15.207 PASS 2 Radiated Emission 15.209 PASS 3 20dB Bandwidth 15.215 PASS 4 Antenna Requirement 15.203 PASS Report No.: BCTC2211813702-1E No.:BCTC/RF-EMC-005 Page 6 of 26 Edition:A.5 3. Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the Product as specified in CISPR 16-4-2. This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. No. Item Uncertainty 1 3m chamber Radiated spurious emission(9kHz-30MHz) U=3.7dB 2 3m chamber Radiated spurious emission(30MHz-1GHz) U=4.3dB 3 3m ch…
Text truncated - open the document above for the full version.
Report No.: BCTC2211813702-1E No.:BCTC/RF-EMC-005 Page 24 of 26 Edition:A.5 11. EUT Test Setup Photographs Conducted Emissions Photo Radiated Measurement Photos Report No.: BCTC2211813702-1E No.:BCTC/RF-EMC-005 Page 25 of 26 Edition:A.5
1-2/F., Building B, Pengzhou Industrial Park, · Bao'an District, Shenzhen, Guangdong · China
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 0.115 MHz - 0.205 MHz | - |