2A3ZQ-IEG006Walkie AI

Page 1 of 1

IEG006

` Report No.: SUCR260100002501 Page: 1 of 36 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Attention: To check the authenticity of testing / inspection report & certificate, please contact us at telephone:(86-755) 8307 1443, or email: [email protected] SAR TEST REPORT Application No.: SUCR2601000025AT Applicant: Shenzhen Geling Technology Co., Ltd. Address of Applicant: 4th Floor, Building 2, No.302, Huarong Road, Dalang Street, Longhua District Shenzhen 518109 China Manufacturer: Shenzhen Geling Technology Co., Ltd. Address of Manufacturer: 4th Floor, Building 2, No.302, Huarong Road, Dalang Street, Longhua District, Shenzhen, Guangdong, China EUT Description: Walkie AI Model No.: IEG006 Trade Mark: inspireyes FCC ID: 2A3ZQ-IEG006 Standards: FCC 47CFR §2.1093 Date of Receipt: 2026-01-12 Date of Test: 2026-01-22 Date of Issue: 2026-01-31 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. ` Report No.: SUCR260100002501 Page: 2 of 36 Revision Record Version Description Date Remark 00 Original 2026-01-31 / Authorized for issue by: Prepared By Leon Liu/ Project Engineer Approved By Nick Hu/ Reviewer ` Report No.: SUCR260100002501 Page: 3 of 36 TEST SUMMARY Frequency Band Maximum Reported SAR(W/kg) Front To Face Body 5mm 462M 0.12 0.25 Wi-Fi 2.4G <0.10 <0.10 SAR Limited(W/kg) 1.6 ` Report No.: SUCR260100002501 Page: 4 of 36 Contents 1 General Information ............................................................................................................... 5 1.1 General Description of EUT ........................................................................................ 5 1.2 Test Specification ....................................................................................................... 6 1.3 RF exposure limits ...................................................................................................... 7 1.4 Test Location .............................................................................................................. 8 1.5 Test Engineer ............................................................................................................. 8 1.6 Test Facility ................................................................................................................ 8 2 Laboratory Environment ........................................................................................................ 9 3 SAR Measurements System Configuraion ......................................................................... 10 3.1 The SAR Measurement System ................................................................................ 10 3.2 Isotropic E-field Proble EX3DV4 ............................................................................... 12 3.3 Data Acquisition Electronics (DAE) ........................................................................... 13 3.4 SAM Twin Phantom .................................................................................................. 13 3.5 ELI Phantom ............................................................................................................. 14 3.6 Device Holder for Transmitters ................................................................................. 15 3.7 Measurement Procedure .......................................................................................... 16 3.7.1 Scanning procedure ........................................................................................... 16 3.7.2 Data storage ...................................................................................................... 18 3.7.3 Data Evaluation by SEMCAD ............................................................................. 18 4 SAR measurement variability and uncertainty ................................................................... 20 4.1 SAR measurement variability .................................................................................... 20 4.2 SAR measurement uncertainty ................................................................................. 20 5 Desciption of Test Position ................................................................................................. 21 5.1 The Body Test Position ............................................................................................. 21 5.2 Handheld Push-to-Talk Two-way Radios .................................................................. 21 6 SAR System Verificaion Procedure ..................................................................................... 22 6.1 Tissue Simulate Liquid .............................................................................................. 22 6.1.1 Recipes for Tiss…

Text truncated - open the document above for the full version.

SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. TEL:0755-23035723 Mail:[email protected] URL:www.fmant.cn Antenna test report Item model IEG006 Antenna model SP-470M Antenna Type Helical antenna Testers Yue e wei Auditors Xing xi Xia Date 2025-09-07 Manufacturer SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. Address Room 303, Factory Building, Building C, Hengnan 1st Road, Gushu Community, Xixiang Street, Bao'an District, Shenzhen SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. TEL:0755-23035723 Mail:[email protected] URL:www.fmant.cn RelativeHumidity 15 ... 75 % Temperature +10 °C ~ +30 °C Voltage of the EUT N/A Test equipment and test environment Test Environment Conditions： SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. TEL:0755-23035723 Mail:[email protected] URL:www.fmant.cn Probe microwave anechoic chamber  Frequency Range ：0.4GHz- 6GHz Main test indicators  Passive indicators  Gain  effectiveness  3D pattern  Active indicator  TRP total radiated power  TIS total receiving sensitivity Test equipment SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. TEL:0755-23035723 Mail:[email protected] URL:www.fmant.cn Agilent E5071C Vector network analyzer  Frequency Range ：300 kHz - 8.5GHz R&S CMW500 Broadband wireless communication tester  GSM/3G/4G  WIFI/ Bluetooth  NB-IoT Test equipment SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. TEL:0755-23035723 Mail:[email protected] URL:www.fmant.cn Length:42mm Passive antenna data External diameter: 6.0mm Line diameter: 0.8mm Number of turns: 19.5T 10mm 50mm SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. TEL:0755-23035723 Mail:[email protected] URL:www.fmant.cn Antenna SWR SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. TEL:0755-23035723 Mail:[email protected] URL:www.fmant.cn Antenna Return loss SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. TEL:0755-23035723 Mail:[email protected] URL:www.fmant.cn 天线 Freq(MHz) Efficiency (％) Gian(dBi) 446 MHz 3.57 -11.87 462 MHz 4.47 -10.18 467 MHz 5.73 -9.63 Antenna ain and efficiency SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. TEL:0755-23035723 Mail:[email protected] URL:www.fmant.cn 插入图片4 插入图片1 插入图片2 Antenna Ra n Pattern 插入图片3 SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. TEL:0755-23035723 Mail:[email protected] URL:www.fmant.cn 插入图片1 插入图片2 插入图片3 插入图片4 Antenna Ra n Pattern SHENZHEN FEIMIN TECHNOLOGY CO.,LTD. TEL:0755-23035723 Mail:[email protected] URL:www.fmant.cn 插入图片1 插入图片2 插入图片3 插入图片4 Antenna Ra n Pattern

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR251200562603 Page: 1 of 51 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2512005626AT Applicant: Shenzhen Geling Technology Co., Ltd. Address of Applicant: 4th Floor, Building 2, No.302, Huarong Road, Dalang Street, Longhua District Shenzhen 518109 China Manufacturer: Shenzhen Geling Technology Co., Ltd. Address of Manufacturer: 4th Floor, Building 2, No.302, Huarong Road, Dalang Street, Longhua District, Shenzhen, Guangdong, China Factory: Shenzhen Geling Technology Co., Ltd. Address of Factory: 4th Floor, Building 2, No.302, Huarong Road, Dalang Street, Longhua District, Shenzhen, Guangdong, China Equipment Under Test (EUT): EUT Name: Walkie AI Model No.: IEG006 FCC ID: 2A3ZQ-IEG006 Standard(s) : 47 CFR Part 95, Subpart B Date of Receipt: 2025-12-18 Date of Test: 2025-12-24 to 2026-01-14 Date of Issue: 2026-03-10 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR251200562603 Page: 2 of 51 Revision Record Version Chapter Date Modifier Remark 01 2026-03-10 Original Authorized for issue by: Gebin Sun/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR251200562603 Page: 3 of 51 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 95, Subpart B N/A 47 CFR Part 95, Subpart B 95.587(b) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Frequency Stability 47 CFR Part 95, Subpart B ANSI/TIA-603- E:2016 47 CFR FCC Part95.565 & FCC Part2.1055; Pass Effective Radiated Power (ERP) 47 CFR Part 95, Subpart B ANSI/TIA-603- E:2016 47 CFR FCC Part95.567 & FCC Part2.1046; Pass Occupied Bandwidth 47 CFR Part 95, Subpart B ANSI/TIA-603- E:2016 47 CFR FCC Part 95.573 & FCC Part2.1049; Pass Modulation characteristics 47 CFR Part 95, Subpart B ANSI/TIA-603- E:2016 47 CFR FCC Part 95.575 & FCC Part2.1047; Pass Radiated Spurious Emissions 47 CFR Part 95, Subpart B ANSI/TIA-603- E:2016 47 CFR FCC Part 95.579 & FCC Part2.1053; Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR251200562603 Page: 4 of 51 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 7 4.4 Test Location ...................................................................................................................................... 8 4.5 Test Facility ........................................................................................................................................ 8 4.6 Deviation from Standards ................................................................................................................... 8 4.7 Abnormalities from Standard Conditions ........................................................................................... 8 5 Equipment List .......................................................................................................................................... 9 6 Radio Spectrum Technical Requirement ............................................................................................. 12 6.1 Antenna Requirement ...................................................................................................................... 12 6.1.1 Test Requirement: ....................................................................................................................... 12 6.1.2 Conclusion ................................................................................................................................... 12 7 Radio Spectrum Matter Test Results .................................................................................................... 13 7.1 Frequency Stability ........................................................................................................................... 13 7.1.1 E.U.T. Operation .......................................................................................................................... 13 7.1.2 Test Setup Diagram ..................................................................................................................... 13 7.1.3 Measurement Procedure and Data............................................................................................. 13 7.2 Effective Radiated Power (ERP) ...................................................................................................... 16 7.2.1 E.U.T. Operation .....................................................................................…

Text truncated - open the document above for the full version.

` ReportNo.:SUCR260100002501 Page:1of4 AppendixA DetailedSystemCheckResults 1.SystemPerformanceCheck System Performance Check 450 MHz SystemPerformanceCheck2450MHz Date: 2026/01/22 Test Laboratory: SGS-SAR Lab System Performance Check 450 MHz Head DUT: D450V3; Type: D450V3; Serial: 1103 Communication System: UID 0, CW (0); Frequency: 450 MHz;Duty Cycle: 1:1 Medium: HSL450;Medium parameters used: f = 450 MHz; σ = 0.888 S/m; ε r = 42.829; ρ = 1000 3 kg/m Phantom section: Flat Section DASY 5 Configuration: • Probe: EX3DV4 - SN3982; ConvF(11.49, 11.49, 11.49); Calibrated: 2025/11/07 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1740; Calibrated: 2025/02/17 • Phantom: SAM 7; Type: SAM; Serial: 1702 • DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Body/d=15mm, Pin=250mW/Area Scan (11x21x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.31 W/kg Body/d=15mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 39.10 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 1.86 W/kg SAR(1 g) = 1.23 W/kg; SAR(10 g) = 0.817 W/kg Smallest distance from peaks to all points 3 dB below = 8.2 mm Ratio of SAR at M2 to SAR at M1 = 52.1% Maximum value of SAR (measured) = 1.32 W/kg 0 dB = 1.31 W/kg = 1.18 dBW/kg Date: 2026/01/22 Test Laboratory: SGS-SAR Lab System Performance Check 2450MHz Head DUT: D2450V2; Type: D2450V2; Serial: 922 Communication System: UID 0, CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL2450;Medium parameters used: f = 2450 MHz; σ = 1.801 S/m; ε = 38.74; ρ = 1000 r 3 kg/m Phantom section: Flat Section DASY 5 Configuration: l Probe: EX3DV4 - SN3982; ConvF(7.18, 7.67, 7.44); Calibrated: 2025/11/07 l Sensor-Surface: 1.4mm (Mechanical Surface Detection) l Electronics: DAE4 Sn1740; Calibrated: 2025/02/17 l Phantom: SAM 7; Type: SAM; Serial: 1702 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Body/d=10mm, Pin=250mW/Area Scan (9x15x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 20.6 W/kg Body/d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 93.5 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 25.8 W/kg SAR(1 g) = 12.8 W/kg; SAR(10 g) = 6.08 W/kg Smallest distance from peaks to all points 3 dB below = 9.2 mm Ratio of SAR at M2 to SAR at M1 = 63.1% Maximum value of SAR (measured) = 21.1 W/kg 0 dB = 20.6 W/kg = 13.14 dBW/kg ` ReportNo.:SUCR260100002501 Page:4of4 -EndoftheAppendix-

` ReportNo.:SUCR260100002501 Page: 1 of 6 AppendixB DetailedTestResults 1.FM 462M 2.WIFI WIFI2.4G Date: 2026/01/22 Test Laboratory: SGS-SAR Lab IEG006 462.6125MHz Front To Face 25mm DUT: IEG006; Type: Walkie AI Communication System: UID 0, CW (0); Frequency: 462.613 MHz;Duty Cycle: 1:1 Medium: HSL450;Medium parameters used: f = 463 MHz; σ = 0.899 S/m; ε = 42.554; ρ = 1000 r 3 kg/m Phantom section: Flat Section DASY 5 Configuration: l Probe: EX3DV4 - SN3982; ConvF(11.49, 11.49, 11.49); Calibrated: 2025/11/07 l Sensor-Surface: 1.4mm (Mechanical Surface Detection) l Electronics: DAE4 Sn1740; Calibrated: 2025/02/17 l Phantom: SAM 7; Type: SAM; Serial: 1702 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Scan/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.155 W/kg Configuration/Scan/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 12.83 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 0.177 W/kg SAR(1 g) = 0.106 W/kg; SAR(10 g) = 0.065 W/kg Smallest distance from peaks to all points 3 dB below: Larger than measurement grid Ratio of SAR at M2 to SAR at M1 = 71.6% Maximum value of SAR (measured) = 0.158 W/kg 0 dB = 0.155 W/kg = -8.10 dBW/kg Date: 2026/01/22 Test Laboratory: SGS-SAR Lab IEG006 462.6125MHz Front Side 5mm DUT: IEG006; Type: Walkie AI Communication System: UID 0, CW (0); Frequency: 462.613 MHz;Duty Cycle: 1:1 Medium: HSL450;Medium parameters used: f = 463 MHz; σ = 0.899 S/m; ε = 42.554; ρ = 1000 r 3 kg/m Phantom section: Flat Section DASY 5 Configuration: l Probe: EX3DV4 - SN3982; ConvF(11.49, 11.49, 11.49); Calibrated: 2025/11/07 l Sensor-Surface: 1.4mm (Mechanical Surface Detection) l Electronics: DAE4 Sn1740; Calibrated: 2025/02/17 l Phantom: SAM 7; Type: SAM; Serial: 1702 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Scan/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.292 W/kg Configuration/Scan/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 17.95 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 0.329 W/kg SAR(1 g) = 0.228 W/kg; SAR(10 g) = 0.167 W/kg Smallest distance from peaks to all points 3 dB below: Larger than measurement grid Ratio of SAR at M2 to SAR at M1 = 69.7% Maximum value of SAR (measured) = 0.290 W/kg 0 dB = 0.292 W/kg = -5.35 dBW/kg Date: 2026/01/22 Test Laboratory: SGS-SAR Lab IEG006 WIFI2.4G 802.11g 11CH Front To Face 25mm DUT: IEG006; Type: Walkie AI Communication System: UID 0, WI-FI(2.4GHz) (0); Frequency: 2462 MHz;Duty Cycle: 1:1.001 Medium: HSL2450;Medium parameters used: f = 2462 MHz; σ = 1.836 S/m; ε = 39.903; ρ = 1000 r 3 kg/m Phantom section: Flat Section DASY 5 Configuration: l Probe: EX3DV4 - SN3982; ConvF(7.18, 7.67, 7.44); Calibrated: 2025/11/07 l Sensor-Surface: 1.4mm (Mechanical Surface Detection) l Electronics: DAE4 Sn1740; Calibrated: 2025/02/17 l Phantom: SAM 7; Type: SAM; Serial: 1702 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Scan/Area Scan (9x16x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.0105 W/kg Configuration/Scan/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 0.0260 W/kg SAR(1 g) = 0.002 W/kg; SAR(10 g) = 0.001 W/kg Smallest distance from peaks to all points 3 dB below: Larger than measurement grid Ratio of SAR at M2 to SAR at M1 = 52.3% Maximum value of SAR (measured) = 0.0103 W/kg 0 dB = 0.0105 W/kg = -39.58 dBW/kg Date: 2026/01/22 Test Laboratory: SGS-SAR Lab IEG006 WIFI2.4G 802.11g 11CH Front Side 5mm DUT: IEG006; Type: Walkie AI Communication System: UID 0, WI-FI(2.4GHz) (0); Frequency: 2462 MHz;Duty Cycle: 1:1.001 Medium: HSL2450;Medium parameters used: f = 2462 MHz; σ = 1.836 S/m; ε = 39.903; ρ = 1000 r 3 kg/m Phantom section: Flat Section DASY 5 Configuration: l Probe: EX3DV4 - SN3982; ConvF(7.18, 7.67, 7.44); Calibrated: 2025/11/07 l Sensor-Surface: 1.4mm (Mechanical Surface Detection) l Electronics: DAE4 Sn1740; Calibrated: 2025/02/17 l Phantom: SAM 7; Type: SAM; Serial: 1702 l DASY52 52.10.4(1527); SEMCAD X 14.6.14(7483) Configuration/Scan/Area Scan (9x16x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (measured) = 0.0207 W/kg Configuration/Scan/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.0330 W/kg SAR(1 g) = 0.009 W/kg; SAR(10 g) = 0.004 W/kg Smallest distance from peaks to all points 3 dB below: Larger than measurement grid Ratio of SAR at M2 to SAR at M1 = 41.1% Maximum value of SAR (measured) = 0.0172 W/kg 0 dB = 0.0207 W/kg = -16.85 dBW/kg ` ReportNo.:SUCR260100002501 Page: 6 of 6 -EndoftheAppendix-

` ReportNo.:SUCR260100002501 Page: 1 of 27 AppendixC Calibrationcertificate 1.Dipole D450V3-SN1103 D2450V2-SN922 2.DAE DAE4-SN1740 3.Probe EX3DV4-SN3982 4.DipoleExtend DipoleD450V3SN1103 HeadLiquid Dateof Measurement Return Loss(dB) Δ% Impedance (Ω) ΔΩ Impedance imaginary （ jΩ ） ΔjΩ 2024-06-03-21.6/59/-0.5/ 2025-06-02-21.40.93%58.80.2-0.80.3 DipoleD2450V2SN922 HeadLiquid Dateof Measurement Return Loss(dB) Δ% Impedance (Ω) ΔΩ Impedance imaginary （jΩ） ΔjΩ 2023-08-28-24.3/53.2/5.45/ 2024-08-27-24.10.82%52.90.35.230.22 2025-08-26-24.20.41%530.25.290.16 ` ReportNo.:SUCR260100002501 Page: 27 of 27 -EndoftheAppendix-