2A4DO81043Outpost

3511 University Drive, Durham, NC 27707 | +1 919-493-9390 | www.SMT.com Date: 2/4/2022 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, SPORTSMEDIA TECHNOLOGY CORPORATION hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: 2A4DO81043 Product Description: Outpost Model: 81043 Sincerely, _____________________________ Isaac Walker-Stern Lead Electrical Engineer SPORTSMEDIA TECHNOLOGY CORPORATION 3511 University Drive, Durham, NC 27707 919-493-9390 3511 University Drive, Durham, NC 27707 | +1 919-493-9390 | www.SMT.com Date: 2/4/2022 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, SPORTSMEDIA TECHNOLOGY CORPORATION hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: 2A4DO81043 Product Description: Outpost Model: 81043 We affirm that between Bureau Veritas Consumer Product Services, Inc. and SPORTSMEDIA TECHNOLOGY CORPORATION, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, _____________________________ Isaac Walker-Stern Lead Electrical Engineer SPORTSMEDIA TECHNOLOGY CORPORATION 3511 University Drive, Durham, NC 27707 919-493-9390

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Website: https://www.cps.bureauveritas.com/ Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 Updated References and Contact Info 6.0 7.0 Aug-30-2020 Date: 3/17/2022 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Cc: Bureau Veritas Consumer Products Services Inc. 775 Montague Expressway Milpitas, CA 95035 Subject: Confidentiality Request for FCC ID: 2A4DO81043 Pursuant to CFR 47 sections 0.457 and 0.459, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application be held confidential: Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagram Short Term External Photos Short Term Permanent i Internal Photos Short Term Permanent Operational Description/ Theory of Operation Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent i User’s Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Justification for Confidentiality: This device is a non-consumer device. It is only sold to professional sports leagues as part of a service contract. The contract includes non-disclosure requirements for all information related to the device. Installation is done by professional installers in locations not publicly accessible, i.e. in the scaffolding above a sports venue. Further, the device does not transmit unless connected to a central server and activated by an on-site operator. Documentation Control: The documentation for the Outpost, including but not limited to the user manual and internal photos, is not publicly available or distributed in a printed form. It is supplied on the website to the customer via a secure login. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ______________________________________ Isaac Walker-Stern Lead Electrical Engineer SPORTSMEDIA TECHNOLOGY CORPORATION 3511 University Drive, Durham, NC 27707 919-493-9390 i Permanent confidentiality may be requested in accordance with FCC KDB 726920

CONFIDENTIALITY AND NON-DISCLOSURE AGREEMENT REGARDING SMT OUTPOST THIS CONFIDENTIALITY AND NON-DISCLOSURE AGREEMENT (“Agreement”) is made and entered into as of _________________, 2022 by and between SportsMEDIA Technology Corporation, d/b/a SMT (“SMT”) and ____________________________ (referred to herein as “Recipient”). WHEREAS, in connection with a proposed business relationship between SMT and Recipient, which may include the use of, or access to, SMT’s Outpost (as defined below) by Recipient, SMT intends to disclose or demonstrate to Recipient (or allow Recipient to have access to) certain Confidential Information and Technology (as such terms are defined below); and WHEREAS, SMT has requested that Recipient execute this Agreement as a condition precedent to the disclosure of, or access to, Confidential Information or Technology by SMT to Recipient. NOW, THEREFORE, in consideration of the premises set forth above, the mutual covenants and promises contained herein, and other good and valuable consideration, the receipt and sufficiency of which are hereby acknowledged, the parties hereto agree as follows: 1. SMT Outpost. The outpost (“Outpost”) is one component of the SMT IR tracking system and it collects and pre-processes images from a tracking camera before sending them to the central tracking system server. The Outpost shall be considered both “Confidential Information” and “Technology” as such terms are defined in this Agreement. 2. Confidential Information. 2.1 For purposes of this Agreement, “Confidential Information” shall mean all information disclosed by SMT to Recipient from time to time in oral, written or machine- readable form, or demonstrated by SMT to Recipient, which (a) is not generally known to the public and (b) SMT uses reasonable efforts to protect. Confidential Information, includes, without limitation, any (a) Technology (as defined below), including the SMT Outpost, and all documents and information relating to the Technology, (b) financial statements or other financial information, business plans, trade secret, know-how, idea, invention, process, technique, algorithm, software, hardware, device, design, schematic, drawing, formula, data, plan, strategy, client lists or information regarding SMT’s clients and (c) technical, engineering, manufacturing, product, marketing, servicing, manuals, internal photos, financial, personnel and other information and materials of SMT and its employees, investors, affiliates, licensors, suppliers, vendors, and clients. Confidential Information, however, does not include information that: (1) is now or subsequently becomes generally available to the public through no fault or breach on the part of Recipient; (2) Recipient can demonstrate to have had rightfully in its possession prior to disclosure to the Recipient by SMT; (3) Recipient rightfully obtains from a third party who has the right to transfer or disclose it. 2.2 Recipient hereby acknowledges and agrees that the Confidential Information is proprietary to and a valuable trade secret of SMT. Recipient shall treat the Confidential 2 Information as confidential and proprietary and as valuable business and property rights. Recipient shall use such measures, procedures and systems to prevent unauthorized access to or the disclosure of the Confidential Information of SMT that are at least equivalent to those measures, procedures and systems used by Recipient to prevent unauthorized access to or the disclosure of its proprietary information. Recipient shall not use or disclose the Confidential Information except to those employees of Recipient who have an actual need to know the Confidential Information, and in such case shall first (a) advise the employee receiving such Confidential Information of the existence of this Agreement, the restrictions contained herein and the confidential nature of the Confidential Information, and (b) require each such employee to whom disclosure is made to agree to adhere to the restrictions in this Agreement. The provisions of this paragraph shall survive the termination or expiration of this Agreement for any reason. 2.3 Recipient agrees (a) that any use or disclosure of the Confidential Information by Recipient or its employees for any purpose other than those stated above will be a violation of this Agreement; (b) that any violation of this Agreement will result in immediate and irreparable harm to SMT in an amount that will be impossible to ascertain at the time of the violation and thus monetary damages alone will be an inadequate remedy, and (c) that any violation of this Agreement shall give rise to a right of SMT to obtain enforcement of this Agreement in a court of equity by a decree of specific performance or other injunctive relief, in addition to any other remedy SMT may have. 3. Technology. 3.1 Recipient acknowledges that the SMT Outpost and all computer software, hardware and related processes, know-how, computer codes, technology, manuals and related documentation used or created by SMT and provided or demonstrated to Recipient (collectively, the “Technology”) are the exclusive property of SMT. SMT retains all right, title and interest in or to the Technology, including, without limitation, any inventions, developments or other ideas, whether or not patentable, that may arise in connection with SMT’s performance of services for Recipient. 4. Miscellaneous. 4.1 This Agreement shall be governed by the laws of the State of North Carolina. IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the day and year first above written. SportsMEDIA Technology Corporation, [NAME OF RECIPIENT] d/b/a SMT By:_____________________________ By: Print Name: Gerard J. Hall Print Name: Title: CEO, Founder Title:

EUT Photo - External View EUT – Front EUT – Back EUT – Right EUT – Left EUT – To p EUT – Bottom EUT setup with support units ‘

www.smt.com Model: Outpost P/N: 81043 120VAC ~ 0.9A 60 Hz FCC ID: 2A4DO81043 IC: 28183-81043 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The label material is polyester (3M 7908), and will last the lifetime of the product.

Report No.: FCC_IC_RF_SL21102901-SMT- 001_MPE_2.4G Rev.1 Page No. 1 / 9 Report Format Version: 6.1.1 RF Exposure Report Report No.: FCC_IC_RF_SL21102901-SMT-001_2.4G Rev.2 Product: Test Model no.: Outpost 81043 Series Model: Product Description: HVIN/Model no.: FCC ID: IC ID: N/A Outpost 81043 2A4D081043 28183-81043 Received Date: 11/04/221 Test Date: 11/04/2021-12/16/2021 & 3/21/22 Issued Date: 03/21/2022 Applicant: SportsMEDIA Technology Corporation, d/b/a SMT Address: 3511 University Drive, Durham, NC 27707, USA Manufacturer: BriteLab Inc Address: 6341 San Ignacio Ave. San Jose, CA 95119 Issued By: Bureau Veritas Consumer Products Services, Inc. Lab Address: 775 Montague Expressway, Milpitas, CA 95035 Test Location: 775 Montague Expressway, Milpitas, CA 95035 FCC Registration / Designation Number: 540430 ISED# / CAB identifier: 4842D This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any government agencies. Report No.: FCC_IC_RF_SL21102901-SMT- 001_MPE_2.4G Rev.1 Page No. 2 / 9 Report Format Version: 6.1.1 Table of Contents Contents Release Control Record ........................................................................................................................................ 3 1 Certificate of Conformity ......................................................................................................................... 4 2 General Information ................................................................................................................................. 5 2.1 General Description of EUT .................................................................................................................... 5 3 RF Exposure ............................................................................................................................................. 6 3.1 MPE Calculation Formula ...................................................................................................................... 7 3.2 Classification .......................................................................................................................................... 7 3.3 Antenna Gain ......................................................................................................................................... 7 4 ISED Calculation Result of Maximum Conducted Power .................................................................... 8 Report No.: FCC_IC_RF_SL21102901-SMT- 001_MPE_2.4G Rev.1 Page No. 3 / 9 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued FCC_IC_RF_SL21102901-SMT-001_MPE_2.4G Original Release 01/03/2022 FCC_IC_RF_SL21102901-SMT-001_MPE_2.4G Rev. 1 Updated product information 02/15/2022 FCC_IC_RF_SL21102901-SMT-001_MPE_2.4G Rev. 2 Updated MPE calculation. 03/21/2022 Report No.: FCC_IC_RF_SL21102901-SMT- 001_MPE_2.4G Rev.1 Page No. 4 / 9 Report Format Version: 6.1.1 1 Certificate of Conformity The above equipment has been tested by Bureau Veritas Consumer Products Services, Inc., Milpitas Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Product: Outpost Brand: SMT Test Model no.: 81043 Series Model: N/A Sample Status: Production Applicant: SportsMEDIA Technology Corporation, d/b/a SMT Test Date: 11/04/2021-12/16/2021 & 3/21/22 Standards: FCC Part 2 (Section 2.1093) KDB 447498 D01 Genreal RF Exposure Guidance v06 IEEE C95.1-1992 RSS-102 Issue 5 (2015-03) IEEE C95.3-2002 Prepared by , Date: 03/22/2022 Yu-Chien Ho / Test Engineer Approved by , Date: 03/22/2022 Suresh Kondapalli / Engineer Reviewer Report No.: FCC_IC_RF_SL21102901-SMT- 001_MPE_2.4G Rev.1 Page No. 5 / 9 Report Format Version: 6.1.1 2 General Information 2.1 General Description of EUT Product Outpost Brand SMT Test Model no. 81043 Identification No. of EUT 1 Series Model N/A Status of EUT Production Power Supply Rating 120V/60Hz Modulation Type OQPSK Modulation Technology DSSS Transfer Rate 0.25 Operating Frequency 2.405 ~ 2.480GHz Number of Channel 16 Channels Antenna Type Patch Antenna Gain (dBi) 8 Antenna Connector Internal to the device Report No.: FCC_IC_RF_SL21102901-SMT- 001_MPE_2.4G Rev.1 Page No. 6 / 9 Report Format Version: 6.1.1 3 RF Exposure Following FCC KDB 447498 D01 “General SAR test exclusion guidance” a) For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, in…

Text truncated - open the document above for the full version.

Report No.: FCC_IC_RF_SL21102901-SMT-001_2.4G Rev.2 Page No. 1 / 53 Report Format Version: 6.1.1 RF Test Report Report No.: FCC_IC_RF_SL21102901-SMT-001_2.4G Rev.2 Product: Test Model no.: Outpost 81043 Series Model: Product Description: HVIN/Model no.: FCC ID: IC ID: N/A Outpost 81043 2A4D081043 28183-81043 Received Date: 11/04/221 Test Date: 11/04/2021-12/16/2021 & 03/21/2022 – 03/22/2022 & 04/05/2022 Issued Date: 04/08/2022 Applicant: SportsMEDIA Technology Corporation, d/b/a SMT Address: 3511 University Drive, Durham, NC 27707, USA Manufacturer: BriteLab Inc Address: 6341 San Ignacio Ave. San Jose, CA 95119 Issued By: Bureau Veritas Consumer Products Services, Inc. Lab Address: 775 Montague Expressway, Milpitas, CA 95035 Test Location: 775 Montague Expressway, Milpitas, CA 95035 FCC Registration / Designation Number: 540430 ISED# / CAB identifier: 4842D This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any government agencies. Report No.: FCC_IC_RF_SL21102901-SMT-001_2.4G Rev.2 Page No. 2 / 53 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 EUT Operation Mode ........................................................................................................................... 9 3.2.2 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Description of Support Units ............................................................................................................. 10 3.3.1 EUT Setup Diagram ........................................................................................................................... 11 3.3.2 Duty Cycle of Test Signal .................................................................................................................... 11 3.4 EUT Operating Condition .................................................................................................................. 12 3.4.1 Description of EUT Normal Operation ............................................................................................... 12 3.5 General Description of Applied Standards ........................................................................................ 12 4 Test Types and Results ...................................................................................................................... 13 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 13 4.1.2 Test Instruments ................................................................................................................................ 14 4.1.3 Test Procedures ................................................................................................................................. 15 4.1.4 Deviation from Test Standard ............................................................................................................ 16 4.1.5 Test Setup .......................................................................................................................................... 16 4.1.6 EUT Operating Conditions ................................................................................................................. 17 4.1.7 Test Results .............................................................................…

Text truncated - open the document above for the full version.

EUT Photo – Setup Radiated Emissions Test Below 30MHz Rear Radiated Emissions Test Below 30MHz Front Radiated Emissions Test Below 1GHz Rear View Radiated Emissions Test Below 1GHz Front View EUT Photo – Setup Radiated Emissions Test Below 1GHz. Antenna Facing Forward. Rear View Radiated Emissions Test Below 1GHz. Antenna Facing Forward. Front View Radiated Emissions Above 1GHz, Antenna Facing Forward. Rear View Radiated Emissions Above 1GHz. Antenna Facing Forward. Front View Radiated Emissions Test Above 1GHz. Rear View Radiated Emissions Test Above 1GHz. Front View AC Conducted Emission: Front view AC Conducted Emissions: Side view RF Conducted Measurement Photo #1 RF Conducted Measurement Photo #2 As stated by the manufacturer the antenna is install on the ceiling of an ice hockey rink only in one orientation, antenna element facing down on the ice hockey rink. The worst-case position is how the antenna will be installed.