
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
AE-MC EN 1.00 Contents Safety instructions ................................................................................ 3 Introduction .......................................................................................... 5 Components ...................................................................................................................................... 5 Name and function of each part ...................................................................................................... 6 Cables and connectors ................................................................................................................................. 7 Installation ........................................................................................... 8 Fixing the bracket and the product .................................................................................................. 8 Power supply connection .................................................................................................................. 10 Network connection ......................................................................................................................... 10 TCP/IP ....................................................................................................................................................... 10 TTL input connection ...................................................................................................................... 11 Relay connection .............................................................................................................................. 12 Fail Safe Lock ............................................................................................................................................. 12 Fail Secure Lock .......................................................................................................................................... 12 Automatic door connection ......................................................................................................................... 13 Connecting as a standalone ............................................................................................................... 14 Connecting to Secure I/O 2 ............................................................................................................ 15 Wiegand connection ......................................................................................................................... 16 Resetting Network Settings .............................................................................................................. 17 Restoring the Factory Defaults .......................................................................................................... 17 Product specifications ......................................................................... 18 Dimensions ...................................................................................................................................... 19 FCC compliance information ................................................................ 20 EU Declaration of Conformity (CE) ...................................................... 20 Appendices .......................................................................................... 21 Disclaimers ...................................................................................................................................... 21 Copyright notice .............................................................................................................................. 21 Open Source License ......................................................................................................................... 21 GNU General Public License ......................................................................................................................... 21 GNU Lesser General Public License ................................................................................................................27 OpenSSL License ........................................................................................................................................ 29 Original SSLeay License .............................................................................................................................. 29 Safety instructions 3 Safety instructions Observe the following instructions to use the product safely and prevent any risk of injury or property damage. Warning Noncompliance of instructions could lead to serious injury or death. Installation Do not install the product in a place with direct sunlight, moisture, dust, or soot. A fire or electric shock may occur. Do not install the product in a place with heat from an electric heater. A fire or electric shock may occur due to overheating. Install the product in a dry place. Otherwise, a product damage or electric shock may occur due to moisture. Install the product in a place with no electromagnetic interference. Otherwise, a product damage or electric shock may occur. The user should not install or repair the product independently. A fire, electric shock, or personal injury may occur. If the product has been damaged due to independent installation or repair of the product by the user, free A/S service will not be provided. Operation Do not allow liquids such as water, beverages, or chemicals get into the product. A fire, electric shock, or product damage may occur. Caution Noncompliance of instructions could lead to minor injury or product damage. Installation Do not install the power supply cable in a place where people pass by. Product damage or physical injury may occur. Do not install the product near a highly magnetic object such as a magnet, TV, (especially CRT) monitor, or speaker. A product failure may occur. If installing the product outside where the product is completely ex…
Text truncated - open the document above for the full version.
Moca System Inc. 17-04, 17F Parkview Office Tower, 248, Jeongjail-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, South Korea Date: December 15, 2022 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Airfob Edge Reader / AE-MC / 2A4EWAE-MC To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (below list) required to be submitted with this application be permanently withheld from public review. Permanent Confidential Request -. Schematics -. Block Diagram -. Operational Description SPECIFY REASON FOR REQUEST (i.e. the above documents are company proprietary information that could never get into the possession of your competition). Please contact me if there is any information you may need. Sincerely, Hyunsung, LEE / Chief Research Engineer
Moca System Inc. 17-04, 17F Parkview Office Tower, 248, Jeongjail-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, South Korea Date: December 15, 2022 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Airfob Edge Reader / AE-MC / 2A4EWAE-MC To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (below list) required to be submitted with this application be short-term Confidentiality f or a period of 180 days after grant is issued. Short-Term Confidential Request -. External Photos -. Internal Photos -. Test set-up photo -. User Manual SPECIFY REASON FOR REQUEST (i.e. These documents contain detailed system and equipment descriptions and related information about the product, which we considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, we feel that this information would be of benefit to our competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Hyunsung, LEE / Chief Research Engineer
Moca System Inc. 17-04, 17F Parkview Office Tower, 248, Jeongjail-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, South Korea a Date: December 15, 2022 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Ms. Chloe Lee/ Deputy General Mana ger of Eurofins KCTL Co.,Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Hyunsung, LEE / Chief Research Engineer
This test report shall not be reproduced, except in full, without the written approval External photos of EUT This test report shall not be reproduced, except in full, without the written approval This test report shall not be reproduced, except in full, without the written approval This test report shall not be reproduced, except in full, without the written approval
AE-MC Label Information & Location
This test report shall not be reproduced, except in full, without the written approval Internal photos of EUT This test report shall not be reproduced, except in full, without the written approval PCB pattern antenna (BLE) This test report shall not be reproduced, except in full, without the written approval Loop Antenna (NFC)
This test report shall not be reproduced, except in full, without the written approval * RF Exposure FCC ID: 2A4EWAE-MC 1. Regulation Regulation This document is prepared to show compliance with the RF Exposure requirements as required in §1.1310 of the FCC rules and Regulations. The limit for Maximum Permissible Exposure (MPE), specified in FCC §1.1310, is listed in Table 1-1. According to FCC §1.1310: the criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b). Table 1 – Limits for Maximum Permissible Exposure (MPE) Frequency Range (㎒) Electric Field Strength [V/m] Magnetic Field Strength [A/m] Power Density [㎽/㎠] Averaging Time [minute] (A) Limits for Occupational / Controlled Exposure 0.3 ~ 3.0 614 1.63 *100 6 3.0 ~ 30 1842/f 4.89/f *900/f 2 6 30 ~ 300 61.4 0.163 1.0 6 300 ~ 1 500 / / f/300 6 1 500 ~ 15 000 / / 5 6 (B) Limits for General Population / Uncontrolled Exposure 0.3 ~ 1.34 614 1.63 *100 30 1.34 ~ 30 824/f 2.19/f *180/f 2 30 30 ~ 300 27.5 0.073 0.2 30 300 ~ 1 500 / / f/1 500 30 1 500 ~ 15 000 / / 1.0 30 f=frequency in ㎒, *= plane-wave equivalent power density Per the guidance of KDB 680106, the E-field and H-field limits shown in the table above are extended down to 100 ㎑ in Appendix C): 1) For test separation distances > 50 ㎜ and < 200 ㎜, the power threshold at the corresponding test separation distance at 100 ㎒ in step b) is multiplied by [1 + log(100/f(㎒))] 2) For test separation distances ≤ 50 ㎜, the power threshold determined by the equation in c) 1) for 50 ㎜ and 100 ㎒ is multiplied by ½ 3) SAR measurement procedures are not established below 100 ㎒. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any SAR test results below 100 ㎒ to be acceptable. This test report shall not be reproduced, except in full, without the written approval 2. Result MPE (Maximum Permissive Exposure) Prediction Predication of MPE limit at a given distance: Equation from page 18 of OET Bulletin 65, Edition 97-01 SPGRRPGS4 4 2 S = power density [㎽/㎠] P = Power input to antenna [㎽] G = Power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna [㎝] RF Exposure Compliance Issue The information should be included in the user’s manual: This appliance and its antenna must not be co-located or operation is conjunction with any other antenna or transmitter. A minimum separation distance of 20 ㎝ must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements. Note. 1. The power density P d (5th column) at a distance of 20 ㎝ calculated from the friis transmission Formula is far below the limit of 1 ㎽/㎠. 2. Unequal antenna gains, with equal transmit powers. For antenna gains given by G1, G2, ..., GN ㏈i (i) If transmit signals are correlated, then Directional gain = 10 log[(10G 1 /20 + 10G 2 /20 + ... + 10G N /20)2/NANT] ㏈ i [Note the “20”s in the denominator of each exponent and the square of the sum of terms; the object is to combine the signal levels coherently.] This test report shall not be reproduced, except in full, without the written approval Calculation Result of RF Exposure Mode Frequency [㎒] Max Tune-up Power [㏈m] Max Tune-up Power [㎽] Ant Gain [㏈i] Power density at 20 ㎝ [㎽/㎠] Limit [㎽/㎠] BLE/ 1 Mbps/ Packet 37 2 402 0.50 1.12 1.72 0.000 33 1.00 2 440 0.50 1.12 1.72 0.000 33 1.00 2 480 0.50 1.12 1.72 0.000 33 1.00
AE-MC BLE Antenna page2 ---------------------------------------- Spec page3---------------------------------------- 안테나 특성 page4 --------------------------------------- 도면 및 사진 승인원 제조사: (주) 모카시스템 모델명: AE-MC 제품명: AE-MC-BLE ANT 1 AE-MC BLE Antenna Spec VSWR Band2.4GHz ISM Frequency2.4~2.483GHz VSWR≤1.7 Peak Gain 0.99~1.72 dBi Avg Gain-3.21 ~ -2.64 dBi Directivity Directional PolarizationLinear Imapedance50 Ohms TYPEPCB(FR4) type PIFA 2 AE-MC BLE Antenna Radiation 1 2 3 4 5 Pattern ▲ Side View(left), ▼ Top View front at -90 Efficiency [GHz] Value[dBi] Degree Value[dBi][%] No FrequencyPeak ValueMinimum ValueAvg. Gain Degree[dBi] 2.4 0.99 75/75 -14.51 90 -3.11 48.82 54.4 2.483 1.25 75/75 -16.68 60 -3.21 47.74 2.45 1.72 75/75 -15.43 60 -2.64 50.382.5 1.59 75/75 -18.5 60 -2.98 3 AE-MC BLE Antenna Drawing Pictures 4
verify No.486864194749 Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR22-SRF0220-A Page (2) of (36) KCTL-TIR001-003/7 (220705) KP22-06663 REPORT REVISION HISTORY Date Revision Page No 2022-12-23 Originally issued - 2023-01-10 Updataed 5 This report shall not be reproduced except in full, without the written approval of Eurofins KCTL Co.,Ltd. This document may be altered or revised by Eurofins KCTL Co.,Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by Eurofins KCTL Co.,Ltd. will constitute fraud and shall nullify the document. This test report is a general report that does not use the KOLAS accreditation mark and is not related to KS Q ISO/IEC 17025 and KOLAS accreditation. Note. The report No. KR22-SRF0220 is superseded by the report No. KR22-SRF0220-A. General remarks for test reports Statement concerning the uncertainty of the measurement systems used for the tests (may be required by the product standard or client) Internal procedure used for type testing through which traceability of the measuring uncertainty has been established: Procedure number, issue date and title: Calculations leading to the reported values are on file with the testing laboratory that conducted the testing. Statement not required by the standard or client used for type testing Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR22-SRF0220-A Page (3) of (36) KCTL-TIR001-003/7 (220705) KP22-06663 CONTENTS 1. General information ...................................................................................................... 4 2. Device information ........................................................................................................ 4 2.1. Frequency/channel operations ................................................................................ 5 2.2. RF power setting in TEST SW ................................................................................ 5 2.3. Duty Cycle Factor ................................................................................................... 5 3. Antenna requirement .................................................................................................... 6 4. Summary of tests .......................................................................................................... 7 5. Measurement uncertainty ............................................................................................. 8 6. Measurement results explanation example .................................................................. 9 7. Test results ................................................................................................................. 10 7.1. Maximum peak output power ................................................................................ 10 7.2. Peak Power Spectral Density ............................................................................... 13 7.3. 6 ㏈ Bandwidth(DTS Channel Bandwidth) .......................................................... 15 7.4. Spurious Emission, Band Edge and Restricted bands .......................................... 18 7.5. Conducted Spurious Emission .............................................................................. 32 7.6. AC Conducted emission ....................................................................................... 34 8. Measurement equipment ............................................................................................ 36 Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR22-SRF0220-A Page (4) of (36) KCTL-TIR001-003/7 (220705) KP22-06663 1. General information Client : Moca System Inc. Address : 17-04, 17F Parkview Office Tower, 248, Jeongjail-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea Manufacturer : Moca System Inc. Address : 17-04, 17F Parkview Office Tower, 248, Jeongjail-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea Laboratory : Eurofins KCTL Co.,Ltd. Address : 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea Accreditations : FCC Site Designation No: KR0040, FCC Site Registration No: 687132 VCCI Registration No. : R-20080, G-20078, C-20059, T-20056 CAB Identifier: KR0040 ISED Number: 8035A KOLAS No.: KT231 2. Device information Equipment under test : Airfob Edge Reader Model : AE-MC Frequency range : 2 402 ㎒ ~ 2 480 ㎒ (Bluetooth Low Energy) 13.56 ㎒ (NFC) Modulation technique : GFSK (Bluetooth Low Energy), ASK (NFC) Number of channels : 40 ch (Bluetooth Low Energy), 1 ch (NFC) Power source : DC 12 V Antenna specification : PCB pattern antenna (Bluetooth Low Energy) Loop antenna (NFC) Antenna gain : 1.72 ㏈i (Bluetooth Low Energy) Software version : 1.3.4 Hardware version : V01A Operation temperature : -20 °C ~ 50 °C Eurofins KCTL Co.,Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea TEL: 82-31-285-0894 FAX: 82-505-299-8311 www.kctl.co.kr Report No.: KR22-SRF0220-A Page (5) of (36) KCTL-TIR001-003/7 (220705) KP22-06663 2.1. Frequency/channel operations This device contains the following capabilities: Bluetooth Low Energy, NFC Ch. Frequency (㎒) 00 2 402 . . . . 19 2 440 . . . . 39 2 480 Table 2.1.1. Bluetooth Low Energy 2.2. RF power setting in TEST SW Frequency(㎒) RF Power setting value 2 402 Default 2 440 2 480 Notes. For test software, we used “nRF Connect for Desktop” from Nordic Semiconductor. 2.3. Duty Cycle Factor Test mode Period (ms) On time (ms) Duty cycle Duty Cycle Factor (dB) (Linear) (%) 1M Bits/s, 37 Packet 0.625 0.391 0.625 1 62.51 2.04 1M Bits/s, 37 Packet 2.501 2.136 0.854 0 85.40 0.69 Notes. 1. Duty cycle (Linear) = Ton time / Period 2. DCF(Duty cycle factor…
Text truncated - open the document above for the full version.
This test report shall not be reproduced, except in full, without the written approval Test setup photos - 9 ㎑ ~ 30 ㎒ - 30 ㎒ ~ 1 ㎓ This test report shall not be reproduced, except in full, without the written approval - 1 ㎓~ 18 ㎓ - 18 ㎓ ~ 26.5 ㎓ This test report shall not be reproduced, except in full, without the written approval - Conducted Emission This test report shall not be reproduced, except in full, without the written approval NFC - 9 ㎑ ~ 30 ㎒ - 30 ㎒ ~ 1 ㎓
Suwon Lab. 65 Sinwon-ro, Yeongtong-gu, · Suwon-si, · South Korea
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 986.00 µW |

Airfob Edge Reader
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHz
Airfob Patch
Equipment Class
DTS - Digital Transmission System
Airfob Edge Reader
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter