2A4EZ-AMGTSCube Controls x Mercedes-AMG - GT Edition SIM Wheel

Use and Maintenance Manual – Cube Controls Steering Wheels1 Use and maintenance owner’s manual Cube Controls x Mercedes-AMG - GT Edition SIM Wheel Use and Maintenance Manual – Cube Controls Steering Wheels2 Contents Section 1 Manufacturer data Repair and assistance Manual overview Graphics Symbols Section 3 Handling Transport Installation Configuration Warning Checks and operations before starting Configuration procedure Use Troubleshooting Power on procedure Power off procedure Operating procedure Section 2 Warranty General safety standards Warning Safety standards General description Usage limits and technical information Unintended use Residual risks FCC Compliance Statement Section 4 Maintenance Safety Periodic maintenance Exceptional maintenance Decommissioning Disabling the device Dismantling and disposal 3 Section 1 Use and Maintenance Manual – Cube Controls Steering Wheels4 DECLARATION OF CONFORMITY The product described in this documentation is accompanied by a declaration of conformity, written in compliance with the current European Regulations. MANUFACTURER DATA Company’s name Registered Office VAT ID PEC (Certified Email Address) Phone Email Address Website Cube Controls Srl Z.Ind.le Predda Niedda - 07100 - Sassari IT02650500909 [email protected] +39 348 3629338 [email protected] www.cubecontrols.com NOTE BEFORE USING THE DEVICE, ENSURE THAT IT INCLUDES THE DECLARATION OF CONFORMITY. NOTE IF THE DEVICE IS CEDED TO THIRD PARTIES, THIS MANUAL MUST BE HANDED OVER TO THE USER ALONG WITH IT. 5 This manual contains instructions for the setting up, use and maintenance of the Sim Racing equipment. The manual consists of several sections, each of which deals with a series of topics divided into chapters and paragraphs. The general index lists all topics covered in the entire manual. Page numbering is progressive and the page number is shown on each page. This manual is intended for users who wish to install, configure, use and handle maintenance of Cube Controls Sim Racing equipment for the duration of its technical life after its production and sale. In case of sale to any third parties (sale, loan for use, or any other reason), all the documentation must be handed over to the user along with the product. Before performing any operation, it is compulsory to read the entire manual and have fully understood the section related to the operations to be carried out. Cube Controls Srl holds the property rights and copyrights on this user manual. It is forbidden to hand over to third parties or reproduce this document, to use or disclose its contents in any way to third parties without prior authorization to do so by the manufacturer. Cube Controls Srl declares that the information contained in this manual are in accordance with the technical and safety specifications of the device to which the manual refers. NOTE UPON RECEIVING THE PRODUCT, READ THE INSTRUCTION MANUAL CAREFULLY BEFORE PERFORMING ANY OPERATIONS. REPAIR AND ASSISTANCE Exceptional maintenance and technical assistance must only be carried out by Cube Controls Srl or an authorized service centre named by the manufacturer. Use and Maintenance Manual – Cube Controls Steering Wheels6 A certified copy of this manual is stored in the technical dossier kept by the manufacturer. The manufacturer does not recognize any documentation that has not been produced, disclosed or distributed by the manufacturer itself or authorized personnel. This manual, like all technical dossiers, will be held with care by the manufacturer for the duration of the period prescribed by law (10 years). During said period, a copy of the documentation accompanying the product may be requested at the time of sale. During this period, the entire technical dossier remains exclusively available to the supervisory authorities, who may request a copy. After this period, it will be the obligation and at the discretion of those who manage the product to ensure the compliance with the laws in force of both the product and its documentation, at that moment in time. 7 GRAPHICS In order to gain a more immediate understanding of the topics, the following graphic and typographic symbols may appear in this user manual. WARNING GRAPHICS NOTE NOTES CONTAIN IMPORTANT INFORMATION THAT IS HIGHLIGHTED OUTSIDE THE TEXT TO WHICH IT REFERS. WARNING WARNING SIGNS INDICATE PROCEDURES WHOSE TOTAL OR PARTIAL NON OBSERVANCE MAY CAUSE DAMAGE TO THE PRODUCT, ITS COMPONENTS, OR EXPOSE THE USER TO DANGER. DANGER DANGER SIGNS INDICATE PROCEDURES WHOSE TOTAL OR PARTIAL NON-OBSERVANCE MAY CAUSE SERIOUS INJURY TO THE USER OR OTHER PERSONS IN THE VICINITY OR SERIOUS DAMAGE TO THE PRODUCT. Use and Maintenance Manual – Cube Controls Steering Wheels8 SYMBOLS The following symbols are contained in or on the device: MANDATORY READING SIGNAL OF OBLIGATION TO READ THE MANUAL. WARNING SYMBOLS THAT CONTAIN A SAFETY FUNCTION OR WARNING SIGNS MUST NOT BE REMOVED, COVERED OR DAMAGED. 9 Section 2 Use and Maintenance Manual – Cube Controls Steering Wheels10 WARRANTY The conditions of warranty, listed in full in the purchase contract, are only applicable if the device is operated under the conditions of intended use. Except for the ordinary or exceptional maintenance operations described in the MAINTENANCE section and carried out with the indicated procedures all repairs or modifications to the device performed by the user or an unauthorized party will void the warranty. The warranty shall not extend to damages caused by inexperience or negligence in the use of the device, or by poor or omitted maintenance. 1 The warranty is valid for a period of 12 months or 24 months depending on the type of buyer. 2 The Manufacturer assumes the obligation to replace, at its own discretion, malfunctioning, faulty or incor- rectly manufactured parts only after careful inspection of said parts. 3 The cost of transport and/or shipment is always covered by the manufacturer in the case of repairing or replacement of the …

Text truncated - open the document above for the full version.

Manufacturers Leerhead Federal Communicaons Commission Authorizaon and Evaluaon Division 7435 Oakland Mills Road Columbia, MD 21046 USA Cube Controls SRL cerfies that, as of the dates of this applicaon, Americas Compliance Consulng LLC dba iCerfi “ iCerfi” is our designated U.S. agent for service of process for the above referenced FCC ID. Cube Controls SRL accepts to maintain an agent for no less than one year aer the grantee has terminated all markeng and importaon or the conclusion of any Ref: Aestaon Statement Part 2.911(d)(7) Filing FCC ID:2A4EZ-AMG Date: 8/4/2023 TS commission-related proceeding involving the equipment. iCerfi accepts, as of the date of the filing of the applicaon, the obligaon of the designated U.S. agent for service process for the above referenced FCC ID. Designated U.S. Agent Informaon: Name: Americas Compliance consulng, LLC dba iCerfi FCC FRN: 0033399411 Address: 1001 SW Disk Drive, Suite 250, Bend, Oregon 97702 Contact Person: Paul Preston Tel: 866-885-4575 Email: fccagent@icerfi.com Sincerely, Cube Controls SRL Americas Compliance Consulng LLC dba iCerfi Fabio Roberto Sotgiu Paul Preston Signature V02072023

(Cube Controls SRL) (Aug. 10, 2023) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2A4EZ-AMGTS) [Cube Controls SRL] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Cubeddu Massimo (Cube Controls SRL) (Aug. 10, 2023) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2A4EZ-AMGTS) [Cube Controls SRL] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Cubeddu Massimo

Cube Controls SRL (August 10, 2023) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Cube Controls x Mercedes-AMG - GT Edition SIM Wheel / AMGTS / FCC ID: 2A4EZ-AMGTS) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Cubeddu Massimo Title: lead designer & co-founder

Cube Controls SRL (August 10, 2023) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Cubeddu Massimo Title: lead designer & co-founder

External Photos

FCC ID LABEL: Label Location: FCC ID: 2A4EZ-AMGTS Model No.: AMGTS

Internal Photos ANT

Shenzhen CTB Testing Co., Ltd. FCC ID: 2A4EZ-AMGTS Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. BLE: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion 2.402 -0.873 0.82 0±1 1.00 1.26 <5 0.39023 3.00 YES 2.44 -1.244 0.75 -1±1 0.00 1.00 <5 0.31241 3.00 YES 2.480 -0.392 0.91 0±1 1.00 1.26 <5 0.39651 3.00 YES GFSK Conclusion: For the max result : 0.39651≤ FCC Limit 3.0 for 1g SAR.

公司地址：深圳市龙岗区宝龙街道沙背坜鸿永利工业区 H 栋 TEL:0755-28700870 FAX：0755-28483275 Product specification Product Name: 2.4G antenna 电性能指标Electrical Specifications 频率范围Frequency Range (MHz) 2400-2500 输入阻抗Input Impendence (Ω) 50 电压驻波比V.S.W.R ≤2.0 增益Gain (dBi) 2±0.5 极化形式Polarization Type 垂直 Vertical 最大功率Maximum power(W) 20 垂直面波瓣角度Vertical lobe Angle（E） 50~65° 水平面波瓣角度Water plane lobe Angle（H） 360° 机械指标Mechanical Specifications 连接器型号Connect Type SMA-J 天线尺寸Size Ø 9.5*28.5MM 工作温度Operating Temp -30 ~ +50 ̊C 储存温度Storage Temp -30 ~ +70 ̊C 公司地址：深圳市龙岗区宝龙街道沙背坜鸿永利工业区H栋 TEL:0755-28700870 FAX：0755-28483275 Product structure drawing 公司地址：深圳市龙岗区宝龙街道沙背坜鸿永利工业区H栋 TEL:0755-28700870 FAX：0755-28483275 Electrical performance test report VSWR 公司地址：深圳市龙岗区宝龙街道沙背坜鸿永利工业区H栋 TEL:0755-28700870 FAX：0755-28483275 Efficiency & gain Frequency (MHz) （工作频段） Efficiency (%) （效率） Peak Gain (dBi) （增益） 2400 60.90 1.88 2410 60.08 1.84 2420 60.85 1.79 2430 57.66 1.51 2440 55.80 1.59 2450 57.22 2.00 2460 55.98 2.16 2470 55.28 2.23 2480 57.12 2.34 2490 58.46 2.28 2500 60.28 2.38 公司地址：深圳市龙岗区宝龙街道沙背坜鸿永利工业区H栋 TEL:0755-28700870 FAX：0755-28483275 2D&3D Direction chart 2400MHz E1 E2 H 2450MHz E1 E2 H 2500MHz E1 E2 H 公司地址：深圳市龙岗区宝龙街道沙背坜鸿永利工业区 H 栋 TEL:0755-28700870 FAX：0755-28483275 Product picture：

Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB230721029RFX Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 35 TEST REPORT Compiled by: Reviewed by: Approved by: Zhou Kui Arron Liu Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Product Name: Cube Controls x Mercedes-AMG - GT Edition SIM Wheel FCC ID: 2A4EZ-AMGTS Trademark: Cube Controls Model Number: AMGTS Prepared For: Cube Controls SRL Address: Predda Niedda str.30 07100 Sassari Italy Manufacturer: Vonger Electric and Technology Co.Ltd Address: Jindiyuan 2-711, Qingxianbei St.51, Taiyuan, Shanxi, China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Jul. 17, 2023 Sample tested Date: Jul. 17, 2023 to Jul. 21, 2023 Issue Date: Jul. 21, 2023 Report No.: CTB230721029RFX Test Standards FCC Part15.247 ANSI C63.10:2013 Test Results PASS Remark: This is Bluetooth radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB230721029RFX Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 35 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ........................................................................................................................................ 3 2. TEST SUMMARY ........................................................................................................................... 4 3. MEASUREMENT UNCERTAINTY ................................................................................................. 5 4. PRODUCT INFORMATION AND TEST SETUP ............................................................................ 6 4.1 Product Information .......................................................................................................................... 6 4.2 Test Setup Configuration .................................................................................................................. 6 4.3 Support Equipment........................................................................................................................... 6 4.4 Channel List ..................................................................................................................................... 7 4.5 Test Mode ........................................................................................................................................ 7 4.6 Test Environment ............................................................................................................................. 7 5. TEST FACILITY AND TEST INSTRUMENT USED ....................................................................... 8 5.1 Test Facility ...................................................................................................................................... 8 5.2 Test Instrument Used ....................................................................................................................... 8 6. AC POWER LINE CONDUCTED EMISSION ................................................................................ 10 6.1 Block Diagram Of Test Setup ......................................................................................................... 10 6.2 Limit ................................................................................................................................................ 10 6.3 Test procedure ............................................................................................................................... 10 6.4 Test Result ..................................................................................................................................... 12 7. RADIATED SPURIOUS EMISSION ............................................................................................. 14 7.1 Block Diagram Of Test Setup ......................................................................................................... 14 7.2 Limit ................................................................................................................................................ 14 7.3 Test procedure ............................................................................................................................... 15 7.4 Test Result ..................................................................................................................................... 16 8. BAND EDGE AND RF COUNDUCTED SPURIOUS EMISSIONS ............................................... 23 8.1 Block Diagram Of Test Setup ......................................................................................................... 23 8.2 Limit ................................................................................................................................................ 23 8.3 Test procedure ............................................................................................................................... 23 8.4 Test Result ..................................................................................................................................... 24 9. COUDUCTED OUTPUT POWER ................................................................................................. 26 9.1 Block Diagram Of Test Setup ..........................…

Text truncated - open the document above for the full version.

Radiated Emission Below 1G Above 1G Conducted emissions