2A4NH-AS02Spinning Bike

MODEL : S102 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation.

Appendix-S102-Photos Page 3 of 8 2. Photographs –Constructional Details 2.1. EUT – External View Model S102 FCC ID: 2A4NH-AS02 Appendix-S102-Photos Page 4 of 8 Appendix-S102-Photos Page 5 of 8

Label Location 20.00 mm 60.00 mm S102 FCC ID: 2A4NH-AS02 20.00 mm 60.00 mm PS104 FCC ID: 2A4NH-AS02 20.00 mm 60.00 mm PS200 FCC ID: 2A4NH-AS02 20.00 mm 60.00 mm S104 FCC ID: 2A4NH-AS02 20.00 mm 60.00 mm S200 FCC ID: 2A4NH-AS02 20.00 mm 60.00 mm S300 FCC ID: 2A4NH-AS02 20.00 mm 60.00 mm S201 FCC ID: 2A4NH-AS02 20.00 mm 60.00 mm S202 FCC ID: 2A4NH-AS02 20.00 mm 60.00 mm S301 FCC ID: 2A4NH-AS02 20.00 mm 60.00 mm S302 FCC ID: 2A4NH-AS02

Appendix-S102-Photos Page 6 of 8 2.2. EUT – Internal View Model S102 FCC ID: 2A4NH-AS02 Appendix-S102-Photos Page 7 of 8 Appendix-S102-Photos Page 8 of 8 Ant.

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 8 TEST REPORT Reference No. .................... : WTD24D05115105W002 FCC ID ................................ : 2A4NH-AS02 Applicant ............................ : Jiangxi EQi Industrial Co., Ltd Address .............................. : Luliang Road, Yining Town, Xiushui County, Jiujiang City, Jiangxi Province, China Manufacturer .................... : Jiangxi EQi Industrial Co., Ltd Address .............................. : Luliang Road, Yining Town, Xiushui County, Jiujiang City, Jiangxi Province, China Product ............................... : Spinning Bike Model(s). ............................ : S102, S104, PS104, PS200, S200, S300, S201, S202, S301, S302 Standards........................... : FCC 47CFR Part 2 Subpart J Section 2.1091 Date of Receipt sample .... : 2024-06-03 Date of Test ....................... : 2024-06-03 to 2024-06-07 Date of Issue ...................... : 2024-06-19 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Estel Qian / Project Engineer Deval Qin / Designated Reviewer Reference No.: WTD24D05115105W002 Page 2 of 8 Waltek Testing Group Co., Ltd. http://www.w altek.com.cn 2. Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2.CONTENTS ............................................................................................................................................... 2 3.REVISION HISTORY ................................................................................................................................. 3 4.GENERAL INFORMATION ....................................................................................................................... 4 4.1. GENERAL DESCRIPTION OF E.U.T.................................................................................................... 4 4.2. DETAILS OF E.U.T. ......................................................................................................................... 4 4.3. TEST FACILITY ................................................................................................................................ 5 4.4. SUBCONTRACTED ........................................................................................................................... 5 4.5. ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................ 5 5.TEST SUMMARY ...................................................................................................................................... 6 6.RF EXPOSURE ......................................................................................................................................... 7 6.1. REQUIREMENTS .............................................................................................................................. 7 6.2. THE PROCEDURES / LIMIT ................................................................................................................ 7 6.3. MPE CALCULATION METHOD........................................................................................................... 8 6.4. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ................................................................... 8 Reference No.: WTD24D05115105W002 Page 3 of 8 Waltek Testing Group Co., Ltd. http://www.w altek.com.cn 3. Revision History Test Report No. Date of Receipt Sample Date of Test Date of Issue Purpose Comment Approved WTD24D05115105W002 2024-06-03 2024-06-03 to 2024-06-07 2024-06-19 Original-Valid Reference No.: WTD24D05115105W002 Page 4 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4. General Information 4.1. General Description of E.U.T. Product: Spinning Bike Model(s): S102, S104, PS104, PS200, S200, S300, S201, S202, S301, S302 Test Sample Number: 1-1/1 Model Description: Only the model names are different. Model S102 was tested in the report. Bluetooth Version: 5.1 Hardware Version: V1.0 Software Version: V1.0 4.2. Details of E.U.T. Operation Frequency: BLE: 2402~2480MHz Max. RF output power: BLE: 0.47dBm Modulation Technology: GFSK Antenna installation: PCB printed antenna Antenna Gain: 0dBi Note: #: The antenna gain is provided by the applicant, and the applicant should be responsible for its authenticity, WALTEK lab has not verified the authenticity of its information. Ratings: DC 3V from AA battery*2 Reference No.: WTD24D05115105W002 Page 5 of 8 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4.3. Test Facility The test facility has a test site registered with the following organizations: ISED CAB identifier: CN0013. Test Firm Registration No.: 7760A. Waltek Testing Group Co., Ltd. Has been registered and fully described in a report filed with the Industry Canada. The acceptance letter from the Industry Canada is maintained in our files. Registration number 7760A, October 15, 2016. FCC Designation No.: CN1201. Test Firm Registration No.: 523476. Waltek Testing Group Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration number 523476, September 10, 2019. 4.4. Subcontracted Whether parts of tests for the product have been subcontracted to other labs: Yes No If Yes, list the related test items and lab information: …

Text truncated - open the document above for the full version.

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 28 TEST REPORT Reference No. .................... : WTD24D05115105W001 FCC ID ................................ : 2A4NH-AS02 Applicant ............................ : Jiangxi EQi Industrial Co., Ltd Address .............................. : Luliang Road, Yining Town, Xiushui County, Jiujiang City, Jiangxi Province, China Manufacturer .................... : Jiangxi EQi Industrial Co., Ltd Address .............................. : Luliang Road, Yining Town, Xiushui County, Jiujiang City, Jiangxi Province, China Product ............................... : Spinning Bike Model(s). ............................ : S102, S104, PS104, PS200, S200, S300, S201, S202, S301, S302 Standards........................... : FCC 47CFR Part 15.247 Date of Receipt sample .... : 2024-06-03 Date of Test ....................... : 2024-06-03 to 2024-06-07 Date of Issue ...................... : 2024-06-19 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Estel Qian / Project Engineer Deval Qin / Designated Reviewer Reference No.: WTD24D05115105W001 Page 2 of 28 Waltek Testing Group Co., Ltd. http://www.w altek.com.cn 2 Contents Page 1 COVER PAGE .......................................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................................ 2 3 REVISION HISTORY ........................................................................................................................................... 3 4 GENERAL INFORMATION ................................................................................................................................ 4 4.1 General Description of E.U.T. ....................................................................................................... 4 4.2 Details of E.U.T. ............................................................................................................................ 4 4.3 Channel List .................................................................................................................................. 4 4.4 Test Facility ................................................................................................................................... 5 4.5 Subcontracted ............................................................................................................................... 5 4.6 Abnormalities from Standard Conditions ...................................................................................... 5 4.7 Test Mode ..................................................................................................................................... 5 5 TEST SUMMARY .................................................................................................................................................. 6 6 EQUIPMENT USED DURING TEST .................................................................................................................. 7 6.1 Equipments List ............................................................................................................................ 7 6.2 Description of Support Units ......................................................................................................... 7 6.3 Measurement Uncertainty ............................................................................................................ 8 6.4 Test Equipment Calibration .......................................................................................................... 8 7 RADIATED EMISSIONS ...................................................................................................................................... 9 7.1 EUT Operation .............................................................................................................................. 9 7.2 Test Setup .................................................................................................................................. 10 7.3 Spectrum Analyzer Setup ........................................................................................................... 11 7.4 Test Procedure ........................................................................................................................... 12 7.5 Corrected Amplitude & Margin Calculation ................................................................................ 12 7.6 Summary of Test Results ........................................................................................................... 13 8 CONDUCTED SPURIOUS EMISSIONS .......................................................................................................... 16 8.1 Test Procedure ........................................................................................................................... 16 8.2 Test Result .................................................................................................................................. 17 9 BAND EDGE MEASUREMENT ........................................................................................................................ 20 9.1 Test Produce .............................................................................................................................. 20 9.2 Test Result ......…

Text truncated - open the document above for the full version.

version01 Jiangxi EQi Industrial Co., Ltd. Declaration concerning Antenna Specification It is hereby declared that the product Model No.: S102, S104, PS104, PS200, S200, S300, S201, S202, S301, S302 FCC ID: 2A4NH-AS02 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for PCB antenna type(s) described below: Model No. of antenna: JJ-BLE Type of antenna: PCB printed antenna Gain of the antenna: 0 dBi Frequency range: 2400 – 2483.5 MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: Jiangxi EQi Industrial Co., Ltd. Address: Luliang Road, Yining Town, Xiushui County City: Jiujiang ZIP / Postal code: Country: China Contact Name: zhou wei Date: 2024-6-5 Signature:

Antenna Describe 1. Antenna Describe: Antenna Plate IFA Antenna Gain 0 dBi Frequency Range 2400 – 2483.5 MHz Connector Type PCB Model Name JJ-BLE Company Name FITHOME (Xiamen) Technology Co., Ltd. Company Address Room 224, NO.13, Zhongwan Road, Jimei District, Xiamen, China 2. External View Drawing: Picture of Antenna 3. Antenna Radiation Pattern Radiation pattern @2402MHz Total Average Gain: -0.41 dBi Phi 0° 45° 90° 135° 180° 235° 270° 315° Gain -0.1 -0.3 -0.7 -0.5 -0.1 -0.5 -0.7 -0.7 Radiation pattern @2440MHz Total Average Gain: -0.26 dBi Phi 0° 45° 90° 135° 180° 235° 270° 315° Gain 0 -0.1 -0.3 -0.5 -0.1 -0.2 -0.6 -0.3 Radiation pattern @2480MHz Total Average Gain: -0.22 dBi Phi 0° 45° 90° 135° 180° 235° 270° 315° Gain 0 -0.1 -0.2 -0.5 0 -0.3 -0.5 -0.2

Appendix-S102-Photos Page 1 of 8 1. Test Setup photos Model S102 FCC ID: 2A4NH-AS02 1.1 Photograph – Radiated Emissions For 9kHz-30MHz Test Site 2# For 30MHz-1000MHz Test Site 2# Appendix-S102-Photos Page 2 of 8 For Above 1GHz Test Site 1#