2A4P3DQ-M2CRemote control

User Manual Music Starry Projector DQ-M2 Thank you for purchasing our product,You can expect premium quality innovation and durability from our product. Please read the instruction manual carefully before use. Instruction manual contains necessary safety advice and user instuctions, follow the instruction manual to operate in order to avoic damaging the product for misuse.Check whether the product is damaged or not when you receive the product. Starry Projector x 1The power requirement of this product is USB DC 5V/2A.Once the range exceeded, please use the regulator device,otherwise it'll shotten the product's life span. 1.Strictly in accordance with the instructions of this operation, do not Remote controller x 1 USB cable x 1 User manual x 1 1.Indoor use,projection to the ceiling. 2.Power on: Switch to AUTO or SOUND. 3.Connect Bluetooth "DQ-M2" of the smart phone to play music. 4.Use correct method of the remote control to make sure the remote control is pointing at the infrared sensor. This product has been comprehensive and rigorous tested at the factory,the user should strictly follow the warning and instructions. Improper use resulting in product damage is not covered by the Company’s warranty. disassemble the host and accessories. 2.This product is suitable for indoor use. 3.The product is producted by LED Unboxing check Package list: Notice: Manual buttons description Statement Remote control function instruction How to use: 123 Warnings: 1 1.One click for previous song / hold press for voice- ; 1 1. Play music 2. Stop music 3. Select to play music from bluetooth(smartphone) or from TF memory card 4. Pause 5. Previous song 6. Next song 7. Control device volume off 8. Control device Volume down 9. Control device Volume up 11. Turn on light 12. Turn off light (Note: The lamp has memory function.If you turn off the light by remote,your previous setting will be saved,and it will show again when you turn it on by remote) 10. Click 1: Red&Green Starry sky; Click 2:Green Starry sky; Click 3: Red Starry sky; Click 4: Off 2 2.One click for next song / hold press for voice+ ; 3 3.Play mode: Click to switch music play by TF memory card or bluetooth device; 4 4.Starry sky mode: R&G - Green - Red - OFF 5 5.LED mode : R-G-B-W-RG-RB-RW-GB-GW-BW-RGB-RGW-GBW-RBW-RGBW-OFF 6 6.Power input: DC 5V (Micro USB) 7 7.TF memory card slot 8 8.Power ON/OFF: Switch to OFF AUTO SOUND 1 2 4 56 7 9 8 10 11 12 13 14 17 18 21 22 19 20 15 16 3 VOL- VOL+ OFF ON OFF ON SLEEP MODE 16-18 AUTO MODE 19-21 SOUND MODE 22-24 FLASH MODE 25-27 COLOR MODE 1- 4 COLOR MODE 5-10 COLOR MODE 11-14 COLOR MODE 15 Brightness Motor Speed PIAY MODE 2 34 EN DE FR ES IT JP 4 1. Play music from smartphone: Turn on bluetooth and search “DQ-M2” on 2. Play music from TF card: Inset your TF memory card and click play mode. smartphone or pad, touch “DQ-M2” to pairing. 17. Sleep mode(motor stop) 18. Auto mode 19. Sound Activated 20. Flash Mode 21. Adjust Brightness 22. Control Motor Speed LED light source : 2 * 4 in 1 Power :8W Green Starry sky :532 nm Red Starry sky :650 nm Product Dimensions: 120x108x105mm Power Input:USB DC 5V Projection Coverage: 161 ~ 538 ft (15~50 ) Operating temperature: 14 F ~ 104 F (-10 C ~ 40 C) Specificantion How to play music? Press1: LED Blue+Starry sky Red+Starry sky Green Fade Press2: Starry sky Red+LED RGBW Fade Press3: Starry sky Green Fade+LED RGBW Fade Press “sound mode” when playing music, LED wave and starry sky stars flashing following music. Press1:All lights strobe; Press2: Dynamic; Press3: LED strobe and starry sky appear at intervals. 13. Single LED colors for choice: R - G - B - W 15. Triple LED mix colors for choice: RGB - RGW - GBW - RBW 16. 4 in 1 LED mix colors : RGBW 14. Double LED mix colors for choice: RG - RB - RW - GB - GW - BW (Note: There’re 15 options of LED color mode that can be match with 3 Starry sky mode, you can easily find out your favorite choice) 0 22 000 EN DE FR ES IT JP EN DE FR ES IT JP EN DE FR ES IT JP Sternenhimmel-Projektor x 1Die Eingangsleitung dieses Produkts beträgt USB DC 5V/2A. Wenn der Bereich überschritten wird, verwenden Sie bitte den Regler, andernfalls wird die Lebensdauer des Produkts verkürzt. 1. Befolgen Sie genau die Bedienungsanleitung und demontieren Sie bitte Fernbedienung x 1 USB-Netzkabel x 1 Benutzerhandbuch x 1 1.Verwenden Sie das Gerät im Innenraum und projizieren Sie das Bild auf die Decke. 2. Einschalten: Schalten Sie es auf “Automatisch” oder “Sound” 3.Schließen Sie das Bluetooth “DQ-M2” des Smartphones an oder legen Sie 4.Bedienen Sie die Fernbedienung auf der richtigen Weise, um sicherzustellen, dass die Fernbedienung auf den Infrarotsensor gerichtet ist. eine TF-Karte ein, um die Musik abzuspielen. Dieses Produkt wurde vor der Lieferung umfassend und streng getestet. Benutzer sollten die Warnungen und Anweisungen genau befolgen. Eine unsachgemäße Verwendung kann zu Schäden am Produkt führen, was nicht unter die Garantie unserer Firma fällt nicht das Hauptgerät und Zubehör. 2.Dieses Gerät eignet sich für die Verwendung im Innenraum. 3.Dieses Produkt besteht aus der Kombination aus LED Überprüfen beim Auspacken Packliste: Achtung: Beschreibung der manuellen Tasten Erklärung Beschreibung der Fernbedienungsfunktionen Verwenden: 567 Warnung: 1 1.Tippen Sie einmal, um das vorherige Lied auszuwählen / halten Sie es lang gedrückt, um die Lautstärke zu reduzieren; 2.Tippen Sie einmal, um das nächste Lied auszuwählen / halten Sie es lang gedrückt, um die Lautstärke zu erhöhen; 3.Wiedergabemodus: Tippen Sie, um zwischen der Wiedergabe von der TF-Speicherkarte oder von Bluetooth-Geräten zu wechseln. 4.Sternenklarer Himmel: Rot + Grün - Grün - Rot - Aus 5.LED-Modus: R-G-B-W-RG-RB-RW-GB-GW-BW-RGB-RGW-GBW-RBW-RGBW-Aus 6.Stromeingang: DC 5V (Micro USB) 7.TF-Speicherkartensteckplatz 8.Netzschalter: Ausschalten/Automatisch/Sprachsteuert 1. Musik abspielen 2. Anhalten 3. Wählen Sie die Musikwiedergabe über Bluetooth oder eine TF-Speicherkarte 4. Anhalten 5. Vorhe…

Text truncated - open the document above for the full version.

Rev 11/20/07 (HUIZHOU SHI DAQI TECHNOLOGY CO., LTD) Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2A4P3DQ-M2C Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram, Schematics, Operational Description Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ( Chuan Lei Wu)

HUIZHOU SHI DAQI TECHNOLOGY CO., LTD Model Difference Product description: Remote control Model name: DQ-M2 DS-032-9P2, DQ-M3, DQ-M4, DQ-M5, DQ-M6, DQ-M7, DQ-M8, DQ-M9, DQ-P8A, DQ-P8B, DQ-P8C, DQ-P8D, DQ-P8E, DQ-Q33, DQ-Q33A, DQ-Q33B, DQ-Q33C, DQ-100, DQ-200, DQ-300 Trade Name: N/A FCC ID: 2A4P3DQ-M2C All the model are the same circuit and RF module, except model names. Regards Sincerely Client’s signature: Client’s name / title : Chuan Lei Wu / Manager Contact information / address: F2 Building B, Namijing industrial Park, Qiuchang Xintang Village, Huiyang District, Huizhou City, China.

(HUIZHOU SHI DAQI TECHNOLOGY CO., LTD) Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2022.02.25 SUBJECT: FCC Application for FCC ID: 2A4P3DQ-M2C To Whom It May Concern: We, the undersigned, hereby authorize Alan Mei at Shenzhen BCTC Testing Co., Ltd. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by AlanMei ofShenzhen BCTC Testing Co., Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, (Chuan Lei Wu)

External Photos

Label & label location 10mm*5mm FCC ID: 2A4P3DQ-M2C Label location

Internal Photos Antenna

No.：BCTC/RF-EMC-00 5 Page: 1 of 30 Edition：A.4 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2202115142E Applicant: HUIZHOU SHI DAQI TECHNOLOGY CO., LTD Product Name: Remote control Model/Type Ref.: DQ-M2 Tested Date: 2022-02-11 to 2022-02-19 Issued Date: 2022-02-19 Report No.: BCTC2202115142E No.：BCTC/RF-EMC-00 5 Page: 2 of 30 Edition：A.4 FCC ID: 2A4P3DQ-M2C The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: Remote control Trademark: N/A Model/Type Ref.: DQ-M2 DS-032-9P2, DQ-M3, DQ-M4, DQ-M5, DQ-M6, DQ-M7, DQ-M8, DQ-M9, DQ-P8A, DQ-P8B, DQ-P8C, DQ-P8D, DQ-P8E, DQ-Q33, DQ-Q33A, DQ-Q33B, DQ-Q33C, DQ-100, DQ-200, DQ-300 Prepared For: HUIZHOU SHI DAQI TECHNOLOGY CO., LTD Address: F2 Building B, Namijing industrial Park, Qiuchang Xintang Village, Huiyang District, Huizhou City, China. Manufacturer: HUIZHOU SHI DAQI TECHNOLOGY CO., LTD Address: F2 Building B, Namijing industrial Park, Qiuchang Xintang Village, Huiyang District, Huizhou City, China. Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Tangwei, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2022-02-11 Sample tested Date: 2022-02-11 to 2022-02-19 Issue Date: 2022-02-19 Report No.: BCTC2202115142E Test Standards: FCC Part15.231 ANSI C63.10-2013 Test Results: PASS Tested by: Approved by: Jeff.Fu/Project Handler Zero Zhou/Reviewer Report No.: BCTC2202115142E No.：BCTC/RF-EMC-00 5 Page: 3 of 30 Edition：A.4 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Test Summary ....................................................................................................... 5 3. Measurement Uncertainty ..................................................................................... 6 4. Product Information And Test Setup ..................................................................... 7 4.1 Product Information ............................................................................................... 7 4.2 Test Setup Configuration ...................................................................................... 7 4.3 Support Equipment ............................................................................................... 7 4.4 Channel List .......................................................................................................... 8 4.5 Test Mode ............................................................................................................. 8 5. Test Facility And Test Instrument Used ................................................................. 9 5.1 Test Facility ........................................................................................................... 9 5.2 Test Instrument Used ............................................................................................ 9 6. Conducted Emissions .......................................................................................... 11 6.1 Block Diagram Of Test Setup .............................................................................. 11 6.2 Limit .................................................................................................................... 11 6.3 Test Procedure ................................................................................................... 11 6.4 EUT Operating Conditions .................................................................................. 12 6.5 Test Result .......................................................................................................... 12 7. Radiated Emissions ............................................................................................. 13 7.1 Block Diagram Of Test Setup .............................................................................. 13 7.2 Limit .................................................................................................................... 14 7.3 Test Procedure ................................................................................................... 15 7.4 EUT Operating Conditions .................................................................................. 16 7.5 Test Result .......................................................................................................... 17 8. Bandwidth Test .................................................................................................... 21 8.1 Block Diagram Of Test Setup .............................................................................. 21 8.2 Limit .................................................................................................................... 21 8.3 Test Procedure ................................................................................................... 21 8.4 EUT Operating Conditions .................................................................................. 21 8.5 Test Result .......................................................................................................... 22 9. Calculation Of Average Factor ............................................................................ 23 10. Dwell Time ........................................................................................................... 25 10.1 Block Diagram Of Test Setup ............................................................................ 25 10.2 Limit .................................................................................................................. 25 10.3 Test Procedure ...........................…

Text truncated - open the document above for the full version.

Report No.: BCTC2202115142E No.：BCTC/RF-EMC-00 5 Page: 29 of 30 Edition：A.4 13. EUT Test Setup Photographs Radiated Measurement Photos