2A4RX-J23Keyless entry remote

ENGLISH KEY FOB MANUAL --- Introduction --- Thanks for purchasing our product. This an aftermarket key replacement for your lost or broken key. Its function and appearance are the same as the original. Please read the instruction clearly before you use the replacement. --- Guangzhou Baihui Auto Electronic Co., Ltd.--- Guangzhou Baihui Auto Electronic Co., Ltd. focuses on this line for more than 10 years. The product could be divided into three parts, key fob, brake light, and Antenna. Our ambition is to provide a perfect auto part replacement for users who enjoy driving. The store offers simple, practical solution to replace your lost or broken parts. --- General Description --- Color: Black Product type: Auto part Manufacture & Brand: 433MHz Product name: Keyless entry remote Caution:Some key fob could be programmed without the original key but some must be with the original. --- PROGRAMMING --- Key fob Cadillac ATS programming instruction (for example) With Recognized Transmitter The vehicle must be off, and both currently recognized and new must be with you. 1. Remove the vehicle key from the recognized transmitter. 2. Place the recognized transmitter in the cupholder. 3. Insert the vehicle key into the key lock cylinder on the driver door handle, then turn the key counterclockwise to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays READY TO LEARN ELECTRONIC KEY. 4. Place the new into the transmitter pocket. The console area will need to be opened to access the transmitter pocket. 5. Press the ENGINE START button. When the transmitter is learned, the DIC display will show that it is ready to program the next transmitter. 6. Remove the transmitter from the transmitter pocket and press unlock or lock on the transmitter. When transmitters are programmed, press and hold the ENGINE START for 12 seconds to exit programming mode. --- Note ---  Some of the key fobs could be programmed by following the step-by-step instruction. But some must be cut and programmed by qualified locksmith or dealer.  If you have no idea about the compatibility between your vehicle and key replacement, you could search for instruction on http://www.programyourremote.com/ or search on YouTube.  If it still does not work after self-programmed, please turn to local locksmith or dealer for technical help.  Avoid severe impact. The key fob is designed to withstand impact under normal use even if it is made of good quality material. It is not recommended to subject it to severe impact or rough usage. --- satisfaction using experience --- All of our key fobs contains electronics components (some uncut key contained), you have no need to prepare electronics or batteries. If there is any problem without the key fob, just contact Guangzhou Baihui Auto Electronic Co., Ltd. and send a message to us by Amazon. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Guangzhou Baihui Auto Electronic Co., Ltd. Add: Floor 7, No. 225, Dongping North Road, Yongping Street,Guangzhou, China Date: 2022-2-28 FCC ID: 2A4RX-J23 Dear Sir/Madam, We, Guangzhou Baihui Auto Electronic Co., Ltd. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: Keyless entry remote Model no.: J23, J24, J25, J26, J27, J28, J29, J364, J420, J421, J480 Sincerely, Name/Title： huixian chen/boss Company: Guangzhou Baihui Auto Electronic Co., Ltd. Address: Floor 7, No. 225, Dongping North Road, Yongping Street,Guangzhou, China Phone: 13556017121 Fax: 020-37412212 E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2022-2-28> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2A4RX-J23 J23 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： huixian chen/boss Company: Guangzhou Baihui Auto Electronic Co., Ltd. Address: Floor 7, No. 225, Dongping North Road, Yongping Street,Guangzhou, China Phone: 13556017121 Fax: 020-37412212 E-Mail: [email protected]

Guangzhou Baihui Auto Electronic Co., Ltd. Floor 7, No. 225, Dongping North Road, Yongping Street,Guangzhou, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2022-2-28 To whom it may concern: We, Guangzhou Baihui Auto Electronic Co., Ltd. the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2A4RX-J23 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： huixian chen/boss Company: Guangzhou Baihui Auto Electronic Co., Ltd. Address: Floor 7, No. 225, Dongping North Road, Yongping Street,Guangzhou, China Phone: 13556017121 Fax: 020-37412212 E-Mail: [email protected]

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4RX-J23 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 3 External Photos of the EUT Fig.1 Fig.2 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4RX-J23 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 3 Fig.3 Fig.4 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4RX-J23 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 3 Fig.5 Fig.6

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4RX-J23 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 Label and Location Size: L1.5cm*W0.5cm Label Location FCC ID: 2A4RX-J23

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4RX-J23 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 3 Internal Photos of the EUT Fig.1 Fig.2 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4RX-J23 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 3 Fig.3 Fig.4 Antenna Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4RX-J23 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 3 Fig.5 Fig.6

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4RX-J23 Report No.: LCS220214006AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 25 FCC TEST REPORT For Guangzhou Baihui Auto Electronic Co., Ltd. Keyless entry remote Test Model: J23 Additional Model No.: Please Refer to Page 6 Prepared for : Guangzhou Baihui Auto Electronic Co., Ltd. Address : Floor 7, No. 225, Dongping North Road, Yongping Street, Guangzhou, Guangdong, China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : February 14, 2022 Number of tested samples : 2 Sample No. : 220214006A-1, 220214006A-2 Serial number : Prototype Date of Test : February 14, 2022 ~ February 27, 2022 Date of Report : February 28, 2022 Scan code to check authenticity Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4RX-J23 Report No.: LCS220214006AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 25 FCC TEST REPORT FCC CFR 47 PART 15 C(15.231) Report Reference No. .................... : LCS220214006AEA Date of Issue ...................................... : February 28, 2022 Testing Laboratory Name .............. : Shenzhen LCS Compliance Testing Laboratory Ltd. Address .............................................. : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure ............. : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ............................ : Guangzhou Baihui Auto Electronic Co., Ltd. Address .............................................. : Floor 7, No. 225, Dongping North Road, Yongping Street, Guangzhou, Guangdong, China Test Specification Standard ............................................ : FCC CFR 47 PART 15 Subpart C, ANSI C63.10-2013 Test Report Form No. ..................... : LCSEMC-1.0 TRF Originator .................................. : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ....................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. ..................... : Keyless entry remote Trade Mark ........................................ : N/A Test Model ........................................ : J23 Ratings .............................................. : DC 3V By CR2032 Button Battery Result .............................................. : Positive Compiled by: Supervised by: Approved by: Kevin Huang/ Administrator Jin Wang / Technique principal Gavin Liang/ Manager Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4RX-J23 Report No.: LCS220214006AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 25 FCC -- TEST REPORT EUT......................................... : Keyless entry remote Test Model........................... : J23 Applicant............................... : Guangzhou Baihui Auto Electronic Co., Ltd. Address.................................. : Floor 7, No. 225, Dongping North Road, Yongping Street, Guangzhou, Guangdong, China Telephone............................... : / Fax.......................................... : / Manufacturer....................... : Guangzhou Baihui Auto Electronic Co., Ltd. Address................................... : Floor 7, No. 225, Dongping North Road, Yongping Street, Guangzhou, Guangdong, China Telephone............................... : / Fax.......................................... : / Factory....................... : Guangzhou Baihui Auto Electronic Co., Ltd. Address................................... : Floor 7, No. 225, Dongping North Road, Yongping Street, Guangzhou, Guangdong, China Telephone............................... : / Fax.......................................... : / Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS220214006AEA February 28, 2022 Date of issue Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4RX-J23 Report No.: LCS220214006AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 25 Revision History Revision Issue Date Revision Content Revised By 000 February 28, 2022 Initial Issue Gavin Liang Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4RX-J23 Report No.: LCS220214006AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 25 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................................. 6 1.1. DESCRIPTION OF DEVICE (EUT) ........................................................................................................................... 6 1.2. OBJECTIVE .......................................…

Text truncated - open the document above for the full version.

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4RX-J23 _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 Test Setup Photos of the EUT Test Setup Photo(s) of Radiated Emissions Measurement Fig. 1 Fig. 2