2A4TH-MJ-X5Barcode Scanner

Bluetooth Pairing STEPS Step1:Pressing scanning button for 8 seconds or scanning following setup code"HID Pairing Setup Barcode"until LED flashing. Note:when barcode scanner enters into pairing status, but it doesn't get paired with any bluetooth device within 1 minute,it will exit from pairing status automatically.Users need to repeat step 1& 2 to pair. Note:when barcode scanner enters into pairing status,but it doesn't get paired with any device within 1 minute,it will exit from pairing status automatically.Users need to repeat step 1& 2 to pair. How to connect with users device through bluetooth? Step1:Scanning following two setting codes one by one Step2:Inserting wireless dongle into USB port of users' device.When you hear one beep,barcode scanner and users' device get connected through 2.4GHz wireless. How to connect with users device through 2.4GHz wireless? Step2:Turning on the Bluetooth of user's device, and find"BarcodeScannerHID"devicein the menu, click it.When you hear one beep,barcode scanner and user's device get connected through bluetooth Standby Time Settings Buzzer LED Indicator Indicator ColorDescription Blue light flicker and extinct fastly Read barcode successfully and make a short sound Red light-the charge lamp Red light on means Charging state,after full,it will be off. Reset Configuration to Defaults If you scan other set-up barcode by mistake and the scanner doesn't work as normal way, you can scan the initialization setup barcode to rever Connections Introductions IntroductionBuzzcr Proformancc One/long beep low to high frequency Power on One/long beep high to low frequency Power off One/short beep low frequency Read a code under normal mode One/short beep low to high frequency Read a code under storage mode One/short beep high to low frequency Read a setting mode Three/short beeps low frequency Transfer failure or storage space is full Red light flashesNo battery detected while charging 2.4GHz Wireless Pairing Steps A：When using 2.4G feature,you can match desktop PC or PC terminals that do not support Bluetooth.Scanner supports systems such as XP, Win7, Win8, Win10,etc. B：When using Bluetooth, you can match Android, IOS mobile phones, or PC terminals with bluetooth capabilities. C：Plug in the data cable with the USB end connected to the computer, you can charge the scanner and use it as wired scanner synchronously 2.4G Mini Receiver Connect with PC Connect with Mobilephone Mini Bluetooth Barcode Scanner Features Performance Parameters Wireless protocol：bluetooth Memory: 16Mb Processor: ARM Cortex 32bits Bluetooth version: Bluetooth 4.1Module Supported symbologies: 1D: Codabar,Code 11, Code93,MSI,Code 128,UCC/EAN-128,Code 39,EAN-8, EAN-13,UPC-A,ISBN,Industrial 25,Interleaved 25, Standard 25,2/5 Matrix, 2D:QR,DataMatrix,PDF417,Aztec,Hanxin , Micro PDF417(optional) Indicator: Led、Buzzer、Vibrator(optional) Battery capacity：650mA Charging voltage/current: 5V/1A Endurance：1D≤12H 2D≤8H（5seconds/scan） Charge time：≤2hours Standby: >30days Working Conditions Working Temperature：32°F to 104°F/0°C to 40°C Storage Temperature：-40°F to 140°F/-40°C to 80°C Humidity：5% to 95% relative humidity (no condensation) Ruggedness: Resist about many times drops from 1.5m to concrete ground Ambient Light Immunity：Under normal office and factory ambient lighting conditions, or exposed to the sun won’t take any effect to it. Electrostatic discharge: In line with 15KV air discharge and 8KV contact discharge requirements Button Description Scan Button Indicator Light Wired ，wireless and bluetooth triple-mode freely switching. Large capacity storage, safe and reliable. Stores barcodes more than 50000pcs off-line scanning. Unique power management system, ultra-long standby time. Rich symbologies supported Adopting imported trigger button, long lifespan, fitting perfectly in your hand for comfortable use. Support Android/IOS devices/Windwos Support HID、SPP、BLE protocol Mini size, fashion design,and portable Ultra low power consumption and standby time setup available Bluetooth transmission distance: indoor transmission distance up to15 meters. Support upload data and charge the battery via USB cable at the same time. Barcode Scanner This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment The devices has been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without restriction Working Modes Normal Mode:Transferring every data instantly after each scanning.Scanning following setup code into "Normal Mode" Scanning …

Text truncated - open the document above for the full version.

C5266091_X24_Ed.2 1/1 ShenZhen Alacrity Barcode Technology Co.,Ltd TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: ShenZhen Alacrity Barcode Technology Co.,Ltd Grantee code: 2A4TH FCC ID: 2A4TH-MJ-X5 FRN: 0032003170 Contact Name: Long Tang Address: 5F,Building B,Southern Pearl Technology Park, No.83,Yingtai Road,Dalang,Longhua,Shenzhen Telephone No: /86-755 23221967 Fax No: / Email: [email protected] i. [ShenZhen Alacrity Barcode Technology Co.,Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [ShenZhen Alacrity Barcode Technology Co.,Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [ShenZhen Alacrity Barcode Technology Co.,Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered List as an entity producing “covered”equipment . Date: 2024/04/19 Applicant’s Name: Long Tang Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Modeldifferencedeclarationletter DifferencesDescription FCCID：2A4TH-MJ-R75 WeShenZhenAlacrityBarcodeTechnologyCo.,Ltdstate: Product ： BarcodeScanner ModelName ： MJ-X5,MJ-X1,MJ-X2,MJ-X3,MJ-X4,MJ-X6,MJ-X7, MJ-X8,MJ-X9,MJ-X10 We(ShenZhenAlacrityBarcodeTechnologyCo.,Ltd)herebystatethatallthemodelsare electricalidenticalincludingthesamesoftwareparameterandhardwaredesign(i.e.,circuit design,PCBLayout,RFmodule/circuit,antennatype(s)andantennalocation,components onPCB,etc.,),samemechanicalstructureanddesign(includingproductenclosure, materials,etc.,),theonlydifferenceisthemodelnameandappearancecolor. Signatory Date:04-22.2024 Name:LongTangDate:Apr22.2024 Title:Manager Signatureofapplicant:

C5266091_X8_Ed.1 1/1 Letter of Authorization ShenZhen Alacrity Barcode Technology Co.,Ltd Company: ShenZhen Alacrity Barcode Technology Co.,Ltd Address: 5F,Building B,Southern Pearl Technology Park, No.83,Yingtai Road,Dalang,Longhua,Shenzhen Product Name: Barcode Scanner Model Number: MJ-X5, MJ-X1,MJ-X2,MJ-X3,MJ-X4,MJ-X6, MJ-X7, MJ- X8,MJ-X9,MJ-X10 FCC Identifier: 2A4TH-MJ-X5 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Long Tang Date: 2024.04.19 Title: Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 ShenZhen Alacrity Barcode Technology Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-04-19 Subject: Request for Confidentiality FCC ID: 2A4TH-MJ-X5 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Long Tang Title: Manager 2024.04.19

Page1of3ReportNo.:FCS202403243 Externalphotos Photo1 Photo2 Page2of3ReportNo.:FCS202403243 Photo3 Photo4 Page3of3ReportNo.:FCS202403243 Photo5 Photo6

LabelandLabelLocation FCCID:2A4TH-MJ-X5

Page1of3ReportNo.:FCS202403243 Internalphotos Photo1 Photo2 Page2of3ReportNo.:FCS202403243 Photo3 Photo4 2.4GANTBLEANT Page3of3ReportNo.:FCS202403243 Photo5 Photo6

FCCRFExposure EUTDescription:BarcodeScanner ModelNo.:MJ-X5 SeriesModel:MJ-X1,MJ-X2,MJ-X3,MJ-X4,MJ-X6,MJ-X7,MJ-X8,MJ-X9,MJ-X10 FCCID:2A4TH-MJ-X5 Equipmenttype:PortableDevice 1.TestProcedure AccordingtoKDB447498D01GeneralRFExposureGuidancev06 The1-gand10-gSARtestexclusionthresholdsfor100MHzto6GHzattest separationdistances ≤ 50mmaredeterminedby: [(max.powerofchannel,includingtune-uptolerance,mW)/ (min.testseparationdistance,mm)]·[√f(GHz)]≤3.0for1-gSARand≤7.5for10-g extremitySAR, where f(GHz)istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbefore calculationTheresultisroundedtoonedecimalplaceforcomparison Thetestexclusionsareapplicableonlywhentheminimumtestseparation distanceis ≤ 50mmandfortransmissionfrequenciesbetween100MHzand6GHz. Whentheminimumtestseparationdistanceis<5mm,adistanceof5mmisappliedto determineSARtestexclusion. 2.TestResultofRFExposureEvaluation BLE [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparation distance,mm)]·[√f(GHz)]=1.6595/5*√2.480=0.5144≤3.0ThresholdatwhichnoSARrequiredis and≤3.0for1-gSAR,Separationdistanceis5mm. Mode Channel Freq.(MHz) Maximum Conducted Output Power(PK) AntennaGain (dBi) Antenna gainnumeric Maxtune- uppower (W) GFSK 24022.200.541.130.0016595 24402.190.541.130.0016557 24802.150.541.130.0016405 2.4G EIRP=EMeas+20log(dmeas)-104.7 EIRPistheequivalentisotropicallyradiatedpower, EMeasindBmisthefieldstrengthoftheemissionatthemeasurementdistance,indBuV/m dMeasisthemeasurementdistance,inm Field strength(dBuV/m) EIRP(dBm)Maxtune- up(mW) Frequency(MHz)Min. distance(mm) Calc. thresholds limit 93.83-1.370.729457240850.224873.0 92.36-2.840.519999244050.162453.0 95.17-0.030.993116247450.312413.0 Conclusion ： NoSARrequired

Revision History Version Issue Date Revisions Rev. 01 Apr. 27, 2023 Initial Issue Report No.: BL-SZ2340126-852 2 / 10 TABLE OF CONTENTS 1 Administrative Data (GENERAL INFORMATION) ........................................................................................... 3 1.1 Identification of the Testing Laboratory .............................................................................................. 3 1.2 Identification of the Responsible Testing Location .............................................................................. 3 1.3 Laboratory Condition ......................................................................................................................... 3 1.4 Announce .......................................................................................................................................... 3 2 PRODUCT INFORMATION ............................................................................................................................ 5 2.1 Applicant Information ......................................................................................................................... 5 2.2 Manufacturer Information .................................................................................................................. 5 2.3 Factory Information ........................................................................................................................... 5 2.4 General Description for Equipment under Test (EUT) ........................................................................ 5 2.5 Technical Information ........................................................................................................................ 5 3 SUMMARY OF TEST RESULTS .................................................................................................................... 6 3.1 Test Standards .................................................................................................................................. 6 3.2 Test Verdict........................................................................................................................................ 6 3.3 Test Uncertainty ................................................................................................................................ 6 4 GENERAL TEST CONFIGURATIONS ............................................................................................................ 7 4.1 Test Condition ................................................................................................................................... 7 4.2 Test Equipment List ........................................................................................................................... 7 4.3 Test Setup ......................................................................................................................................... 7 ANNEX A TEST RESULTS ................................................................................................................................ 8 A.1 Gain and Efficiency .............................................................................................................................. 8 ANNEX B RADIATION PATTERN ..................................................................................................................... 9 ANNEX D EUT PHOTO ................................................................................................................................... 10 Report No.: BL-SZ2340126-852 3 / 10 1 Administrative Data (GENERAL INFORMATION) 1.1 Identification of the Testing Laboratory Company Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1st FL, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Identification of the Responsible Testing Location Test Location 1 Shenzhen BALUN Technology Co., Ltd. Address Block B, 1st FL, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Accreditation Certificate The laboratory is a testing organization accredited by China National Accreditation Service for Conformity Assessment (CNAS) according to ISO/IEC 17025. The accreditation certificate number is L6791. The laboratory is a testing organization accredited by China Metrology Accreditation (CMA). The accreditation certificate number is 2014192290Z. Description All measurement facilities used to collect the measurement data are located at Block B, FL 1, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 518055 1.3 Laboratory Condition Ambient Temperature 19°C to 25°C Ambient Relative Humidity 45% to 55% Ambient Pressure 100 kPa to 102 kPa 1.4 Announce (1) The test report reference to the report template version v2.2. (2) The test report is invalid if not marked with the signatures of the persons responsible for preparing and approving the test report. (3) The test report is invalid if there is any evidence and/or falsification. (4) The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. (5) This document may not be altered or revised in any way unless done so by BALUN and all revisions are duly noted in the revisions section. (6) Content of the test report, in part or in full, cannot be used for publicity and/or promotional purposes without Report No.: BL-SZ2340126-852 4 / 10 prior written approval from the laboratory. Report No.: BL-SZ2340126-852 5 / 10 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Shenzhen LightWind Technology Co., LTD Address Room 24J, Qinghai Tower, No.7043, BeiHuan Road, Futian, Shenzhen, Guangdong, China 2.2 Manufacturer Information Manufacturer Shenzhen LightWind Technology Co., LTD Address Room 24J, Qinghai Tower, No.7043, BeiHuan Road, Futian, Shenzhen, G…

Text truncated - open the document above for the full version.

FCCTestReport ReportNo:FCS202403243W02 Issuedfor Applicant: ShenZhenAlacrityBarcodeTechnologyCo.,Ltd Address: 5F,BuildingB,SouthernPearlTechnologyPark, No.83,YingtaiRoad,Dalang,Longhua,Shenzhen ProductName: BarcodeScanner BrandName: N/A ModelName: MJ-X5 SeriesModel: MJ-X1,MJ-X2,MJ-X3,MJ-X4,MJ-X6,MJ-X7,MJ-X8, MJ-X9,MJ-X10 FCCID: 2A4TH-MJ-X5 IssuedBy:FluxComplianceServiceLaboratory Add:Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-Tech Industrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com Page 2 of40ReportNo.:FCS202403243W02 FluxComplianceServiceLaboratory Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-TechIndustrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com TESTRESULTCERTIFICATION Applicant’sName......................:ShenZhenAlacrityBarcodeTechnologyCo.,Ltd Address......................................: 5F,BuildingB,SouthernPearlTechnologyPark,No.83,Yingtai Road,Dalang,Longhua,Shenzhen Manufacture'sName................:ShenZhenAlacrityBarcodeTechnologyCo.,Ltd Address......................................: 5F,BuildingB,SouthernPearlTechnologyPark,No.83,Yingtai Road,Dalang,Longhua,Shenzhen ProductDescription ProductName ........................... :BarcodeScanner BrandName ............................... :N/A ModelName..............................:MJ-X5 SeriesModel..............................: MJ-X1,MJ-X2,MJ-X3,MJ-X4,MJ-X6,MJ-X7,MJ-X8, MJ-X9,MJ-X10 TestStandards..........................:FCCRulesandRegulationsPart15SubpartC,Section247 TestProcedure..........................:ANSIC63.10:2013 ThisdevicedescribedabovehasbeentestedbyFluxComplianceServiceLaboratory,thetestresults showthattheequipmentundertest(EUT)isincompliancewiththeFCCrequirements.Anditis applicableonlytothetestedsampleidentifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofFluxCompliance ServiceLaboratory,thisdocumentmaybealteredorrevisedbyFluxComplianceServiceLaboratory, personalonly,andshallbenotedintherevisionofthedocument.. DateofTest..................................: Date(s)ofperformanceoftests . :Mar14,2024~Apr15,2024 DateofIssue ................................. :May7,2024 TestResult....................................:Pass Testedby: (ScottShen) Reviewedby : (DukeQian) Approvedby: (JackWang) Page 3 of40ReportNo.:FCS202403243W02 FluxComplianceServiceLaboratory Room105FloorBaohaoTechnologyBuilding1NO.15GongyeWestRoadHi-TechIndustrial,SongshanlakeDongguan Tel:769-27280901Fax:769-27280901http://www.FCS-lab.com TableofContentsPage 1.SUMMARYOFTESTRESULTS...........................................................................................6 1.1TESTFACTORY............................................................................................................7 1.2MEASUREMENTUNCERTAINTY.................................................................................7 2.GENERALINFORMATION...................................................................................................8 2.1GENERALDESCRIPTIONOFTHEEUT.......................................................................8 2.2BLOCKDIGRAMSHOWINGTHECONFIGURATIONOFSYSTEMTESTED............10 2.3DESCRIPTIONOFNECESSARYACCESSORIESANDSUPPORTUNITS...............11 2.4EQUIPMENTSLIST.....................................................................................................12 3.CONDUCTEDEMISSIONMEASUREMENT.......................................................................13 4.6DBBANDWIDTH...............................................................................................................17 4.1Limit..............................................................................................................................17 4.2TestProcedure.............................................................................................................17 4.3Testsetup.....................................................................................................................17 4.4Testresults...................................................................................................................17 4.5OriginalTestData.........................................................................................................18 5.CONDUCTEDOUTPUTPOWER........................................................................................21 5.1LIMIT............................................................................................................................21 5.2TESTPROCEDURE.....................................................................................................21 5.3TESTSETUP...............................................................................................................21 5.5TESTRESULTS...........................................................................................................21 6.BANDEDGEANDSPURIOUS(CONDUCTED)..................................................................22 6.1LIMIT............................................................................................................................22 6.2TESTPROCEDURE.....................................................................................................22 6.3TESTSETUP...............................................................................................................22 6.4TESTRESULTS...........................................................................................................23 6.5Originaltestdata..........................................................................................................23 7.POWERSPECTRALDENSITY...........................................................................................27 7.1LIMIT............................................................................................................................27 7.2TESTPROCEDURE................................................................................................…

Text truncated - open the document above for the full version.

Page 1 of2ReportNo.:FCS202403243 Blow1GHzforradiatedemissiontestsetup Above1GHzforradiatedemissiontestsetup Page 2 of2ReportNo.:FCS202403243 ConductedEmission