2A4TT-G8055-in-1 Wireless Charging Station

User Manual 5.FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

SHEN ZHEN GTL TECHNOLOGY CO .,LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-01-08 FCC ID: 2A4TT-G805 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing SHEN ZHEN GTL TECHNOLOGY CO., LTD certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing SHEN ZHEN GTL TECHNOLOGY CO., LTD certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: SHEN ZHEN GTL TECHNOLOGY CO., LTD Address: 2/F&6/F of Building B11, Hengfeng Industrial city, Hangcheng Street, Baoan District, Shenzhen, China Contact Person: Pona Yan Tel.: +86 13670155505 Email: [email protected] Sincerely, Signature:

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: CLF Import and Export Limited FRN:0033489683 Contact Name: David chen Address: 1312 17th Street #692，Denver, CO 80202, United States Telephone No: (949) 254-2565 Email:[email protected] EIN:98-1720547 This letter is to confirm that the US Agent for Service of Process accepts responsibility to act as a local representative on behalf of SHEN ZHEN GTL TECHNOLOGY CO., LTD The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Applicant: Company name:SHEN ZHEN GTL TECHNOLOGY CO.,LTD Product Description: 5-in-1 Wireless Charging Station FRN: 0032003634 Grantee code:2A4TT FCC ID:2A4TT-G805 Contact Name:Pona Yan Address: 2/F&6/F of Building B11, Hengfeng Industrial city, Hangcheng Street, Baoan District, Shenzhen, China Telephone No: +86 13670155505 Email:[email protected] The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. This Agreement is valid until (Permanently valid). Date: 2024/01/15 Applicant’s Name:Pona Yan US Agent for Service of Process’s Name: Title:Project Manager Title: Manager Signature Signature

Shenzhen Shenguang Electronic Technology Co.,LTD A11/43.5/14 Single hole and double slot rubber wire length 115MM and 150MM two kinds Model NO SG-A11-44-6.3UH A11-43.5-14-050 G230，F3。 TQE 1800510003 Part nunbering systey Client p/NO Enginrer NO Date 2023-10-17 For Enginer Departner Only Rrvised Content APProved Date Prepared /Checked Xie Yanqi Duan Jiawang Approved Authorixed Signaturure Company Chop Enginrer QC APProved APProved Client Designation Xie Xiaozai address：Room 422, Floor 401, Building 5, Baimenqian Industrial Zon, Shawan, Nanwan Subdistrict, Longgang District, Shenzhen Shenzhen Shenguang Electronic Technology Co.,LTD 一、 Winding Procese: NO winding | coil guage number of turns direction of winding note 1 N1 2UEW-B-0.08*108P 12TS CCW 2 二．FEATURES: 1.Test conditions：25°C,65%RH@100KHz/1V 1.1 Inductance 1.11 L0A（Individual coil）=4.1uH±20% 1.12 1.2 1.3 1.4 L0A(Coil + diskette)=6.5uH±10% Q price=70MIN direct current resistanceDCR：45mΩ MAX (Operating Temperature)：-25°C~85°C 2.Test instrument：L:1068+1310;DCR:502BC;SIZE:Callipers 3.bill of materials N O projectmaterials 1 WIRE ￠0.08*105p 2UEW-1.15mm 2 FERRITE 43.5*5.3*0.7 L-slot ferrite hard magnetic 3 GLUE white glues 4 SOLDER XCD-907B 5 Adhesive double-sided adhesive 6 High temperature adhesive / 7 address：Room 422, Floor 401, Building 5, Baimenqian Industrial Zon, Shawan, Nanwan Subdistrict, Longgang District, Shenzhen Shenzhen Shenguang Electronic Technology Co.,LTD 三 CIRCUIT DIAGRAM unit：MM 四．OUTSIDE DIAGRA 标准 A B C D E F H G STD 38.5±1.5 14±1.2 0.7±0.15 120±2 2-5 43.5±1 2.6Max 8 Shenzhen Shenguang Electronic Technology Co.,LTD unit： MM 五．PACKAGE 5.3 The packaging is based on the existing packaging plate as the reference standard, and the actual shipping packaging shall prevail. If there are special requirements, it can be customized。 The packaging shall be based on the exusting packing plate and the actual delivery package shall prevail .If there is any requirement,we can customize it. 1400

Shenzhen Chenxing Electronic Technology Co., Ltd. 1 PRODUCT SPECIFICATION FOR APPROVAL CUSTOMER Shenzhen GTL Technology Co.,Ltd PRODUCT NAME 6242 Transmitting coil module PART No. PRODUCT SPEC Magnetic plate：7.0uH±10% Magnetic plate：62*42*0.8（slotting） outgoing line：0.08*105*9Ts Common double-sided tape/outgoing line100mm DATE 2023-12-01 VERSION REV 1.0 Revision Modified Content Principle 日期 Date 备注 Note REV 1.0 Issue Date Xue Lei 2023-12-01 PREPARED BY CHECKED BY APPROVED BY Authorized signature & company chop Attached is the product specification, if you have any questions, please timely feedback to us, thank you! Shenzhen Chenxing Electronic Technology Co., Ltd. 2 SPECIFICATION 一、Magnetic Panel Specification Length A 61.5±0.5mm Width B 42±0.4mm Thickness C 0.8±0.05mm 二、Product Size 二、 Schematic diagram Coil outer diameter length 53.5±1mm Coil outer diameter width 38±1mm Coil inner diameter length 33.5±1mm Coil inner diameter width 18±1mm product thichness 2.5±0.3mm 出线长度Cable lenth 100±0.5mm Shenzhen Chenxing Electronic Technology Co., Ltd. 3 三、Winding parameters TERMINAL WIRE Turns Winding Direction S F silk-covered wire 0.08*105P 9Ts CCW 四、 Electrical characteristics： 温度 TEMPERATURE:25±10°C, 湿度RELATIVE HUMIDITY:65±20% ITEM TERMINAL SPECIFICATION TEST FREQUENCY TEST EQUIPMENTS IND.电感量 (inductance value) 线圈(Coil)1：1-2 7.0uH±10% 100KHz/1.0Vrms 环境温度(ambient temperature)：25°C LCZ METER 1062 Manufacturer: Shenzhen Chenxing Electronic Technology Co., Ltd. Address: No.303, Nanzhuang Xincun Baxiang, XinzhuangCommunity, Matian Street, Guangming District, Shenzhen

Acknowledgement （CUSTOMER): DATE:2022-6-9 REV.NO.:A0 Department QC QC Department Development Engineering Purchase QC SHENZHEN GTL TECHNOLOGY CO.,LTD （CUSTOMER P/N）: （DESCRIPTION) : （SPECIFICATION) ：Watch coil soft magnetic Hongrishengwei technology Acknowledgement, signature and seal Appoval/DateReviewed by/DateApproval/Date (Official seal of the company) Dong xiaohong 2022-6-9 Lv Hui2022-6-9Wei hanman 2022-6-9 He weihua 2022-6-9Wei lihong 2022-6-9Wei lihong 2022-6-9 Remark： GTL Technolgoy Acknowledgement, signature and seal Appoval/DateReviewed by/DateApproval/Date (Official seal of the company) Remark： Shenzhen Hongrishengwei Technology Co., Ltd HRSW ELECTRONICS CO.,LTD ROHS page:1/3 ADD：Floor 2, Building 1, No. 48 Huanguan Middle Road, Guanlan, Longhua New District, Shenzhen TEL：+86-755-23461055 FAX：+86-0755-28015170 1.MECHANICAL DIMENSION (UNIT:mm) 2.SCHEMATICS: A B C D FGI 20±2 15±1 2.8±0.5 30±2 4±225REF7.8±0.5 3.WINDING： 1.1底部印字100 STE P TAPE REMAR K N1 4.ELECTRICAL SPECIFICATION: ITEM SPEC 5.BILF OF MATERIAL： NO.SGS NO. 1 2 3 4 5 6 page:2/3 SPECIFICATION FOR APPROVAL START-FINISHWIRE TYPETURNS S-F ⌀0.08*24mm 2UEW 12TS (Ref) LDCRIDCQ valueHI-POT S-F S-FS-F 100KHz,0.25V AT 25°CAT 25°C 8.1uH±10% 40mΩ(Max)3A ITEMMATERIAL SPECIFICATIONMANUFACTURER Magnetic core UG25 Soft magnetismNANJINGJINNINGCO,LTD QIANDAO CO.,LTD MagnetN52 7.5*2.45/3200 gose NANJINGJINNINGCO,LTD Copper wire ⌀0.08mm*24 2UEWTAIYI CO.,LTD CUDAK CO.,LTD PART NO TITLE Watch coil soft magnetic Gum backing25 Single side adhesive HONGBAOJEICO,LTD Solder BarSolder Bar TES T CON Shenzhen Hongrishengwei Technology Co., Ltd DRAWN BYCHECKED BY APPROVED BY Xie chaoHe weihuaWei lihong Glue 9999 6.1DIMENSION TEST(UNIT:mm) TEST ITEMABCDFGI 20±2 15±12.8±0.530±2 4±225REF7.8±0.5 1 21.514.52.8531 2.4525.107.81 2 20.614.682.8630 3.8023.777.86 3 20.814.712.7931.5 3.6024.057.82 4 21.314.382.8932 2.7025.067.89 5 21.514.622.9130.21 3.6025.087.87 MAX21.5014.71 2.9132.00 3.8025.107.89 MIN20.6014.38 2.7930.00 2.4523.777.81 AVERAGE 21.11 14.57 2.8630.96 3.20 24.617.85 DCR Q S-F TEST CONDAT 25°C SPEC8.1uH±10% 40mΩ (Max) 18.1021.00 27.9620.00 38.0621.50 48.0420.30 58.0920.40 6 MAX8.1021.50 MIN7.9620.00 AVERAGE8.0520.75 He weihua SPECIFICATION FOR APPROVAL 6.SAMPLE TEST DATA 6.2ELECTRICAL TEST LIDC HI-POT TEST ITEM S-F 100KHz/0.25v PART NO TITLE Watch coil soft magnetic DRAWN BYCHECKED BYAPPROVED BY XiechaoWei lihong Shenzhen Hongrishengwei Technology Co., Ltd

SHEN ZHEN GTL TECHNOLOGY CO., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: January 8, 2024 Subject; Request for Confidentiality FCC ID: 2A4TT-G805 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Pona Yan Title: Manager

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 SHEN ZHEN GTL TECHNOLOGY CO., LTD Date：Jan. 08, 2024 Product Model Number: G805 FCC ID：2A4TT-G805 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: +86 13670155505 On behalf of: SHEN ZHEN GTL TECHNOLOGY CO .,LTD

Ext Photos Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

Label and Label Location Label： Label Location：

Int Photos Photo 1 Photo 2 Earphone: ANT Photo 3 Photo 4 Watch: ANT Phone: ANT Photo 5

- Page 1 of 12 - Report No.: HB20231120005E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: 5-in-1 Wireless Charging Station Trade Mark: N/A Model Number: G805 FCC ID: 2A4TT-G805 Prepared for SHEN ZHEN GTL TECHNOLOGY CO., LTD 2/F&6/F of Building B11, Hengfeng Industrial city, Hangcheng Street, Baoan District, Shenzhen, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 12 - Report No.: HB20231120005E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 7 2.1 TEST LABORATORY ..................................................................................................................................................... 7 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 2.4 TEST SOFTWARE ........................................................................................................................................................ 7 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 8 4 RF EXPOSURE..................................................................................................................................................... 9 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 9 4.1.1. Limit ............................................................................................................................................................ 9 4.1.2. Test Procedures ........................................................................................................................................... 9 4.1.3. Equipment Approval Considerations item 5 b) of KDB 680106 D01 Wireless ........................................... 10 4.1.4. Test Setup .................................................................................................................................................. 10 4.1.5. Test Result ................................................................................................................................................. 11 5 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................12 - Page 3 of 12 - Report No.: HB20231120005E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : SHEN ZHEN GTL TECHNOLOGY CO., LTD Address ................................. : 2/F&6/F of Building B11, Hengfeng Industrial city, Hangcheng Street, Baoan District, Shenzhen, China Manufacturer's Name .......... : SHEN ZHEN GTL TECHNOLOGY CO., LTD Address ................................. : 2/F&6/F of Building B11, Hengfeng Industrial city, Hangcheng Street, Baoan District, Shenzhen, China Product description Product name ........................ : 5-in-1 Wireless Charging Station Model Number ....................... : G805 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Nov. 20, 2023~Jan. 08, 2024 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (G a r y L u) Authorized Signatory : (L e o S u) - Page 4 of 12 - Report No.: HB20231120005E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Te…

Text truncated - open the document above for the full version.

- Page 1 of 2 - Test Setup Photos Radiated Emission Below 30MHz Radiated Emission Above 30MHz - Page 2 of 2 - Conducted Emission MPE