2A4WX-CCWIFIRGBSMART Wifi LIGHTS CONTROLLER

I.Date Parameter II.Product Functions 16 Million Colors Smartphone Control Sync Control by Group Custom mode Timer Mode Light Dancing with Music R G B DIY 2.Download free app a. Search app name "Magic Home WiFi" from IOS APP Store or Android Google play store and install free app b.Scan OR code to install free app: click"Direct connect the device control". Then go to control it directly. In single mode ,you can only control one controller once time.In addition,your phone's WiFi controller must keep connection with WiFi controller "LED net******in the meantime b. Network mode: Click "Setting",then set your controllers to WiFi route one by one.After controllers were connected to WiFi router,connect your phone to this WiFi router.Then,open "Magichome WiFi"app, IV.WIFI Connection Setting a.Single mode: a.Single mode: And wait while your phone scans for Wifi controllers which were connected to this Wifi router,Now,App will show all controllers in "Device List".In "Device List,",you can select controller you want to Control.How many controllers apps can sycn control is same as how many controllers app can sycn control is same as how many devices your Wifi router can support. In network mode ,you can control all controllers which were connected to Wifi router no matter your Wifi router is online or not. C.Remote control by Internet: To control your WiFi controllers anywhere in the word. In network mode ,you just need to keep your WiFi router online. Click the gearicon on the top -left corner to enter the setting page, Choose your WiFi controller and select "Remote Settings" in the pop-up menu.Check the remote state option to change it from " unopen",Once WiFi controller restarts,you can find it in the "Remote " tab in the "Device List "page. Remarks: 1.We are always improve our app.Just update app,you will enjoy more new functions of smart Wifi controller. 2.If your Wfi Controller can't work well,please feedback it to after-sales service.Majority of problems can be solved by software 3.Don't pour water or other liquids on the controllers. FAQ: (A)My phone cannot connects to Wifi controller in single mode. 1)Connect Wifi controller correctly,power suppy--Wifi controller– LED lighting 2) Ensure phone 's WiFi network works normally.Then connect your phone's Wifi network to Wifi controller LED net****** (B)I forgot WiFi controller's password in single mode. If you forgot WiFi controller's password,please power on your controller and hold on pressing "Reset" for 10s and wait additional 10s.Then restart controller,it's password will be default password 88888888 again. "Reset" button is a black round button on PCB,You need to open plastic case. (C)I have failed to connect to WiFi device in network mode Ensure that you have entered the correct password to your router. Switch the controller and your router off.Turn on your router first and then the controller after 30 seconds ,Waits for about 2 minutes before running Magichome WiFi. If the problem still persists ,then go to phone 's WiFi network setting ,and set WiFi controller "LEDnet ******"again .Then, Connect your controller to WiFi router in single mode first. (D)My phone can't run wifi device This app support these OS:Android 2.3 or above;IOS 6.0 or above (E)How many wifi controllers can be controlled by one phone in single mode or network mode? WIFI LIGHTING CONTROLLER See the full line of Ignite LED Lighting at CCWIFIRGB FEATURES: - CUSTOM COLORS AND DESIGN PATTERNS - DOWNLOAD THE EASY TO USE APP - LIGHTS DANCE TO YOUR MUSIC ON YOUR DEVICE - USE WITH OUR WHOLE LINE OF RGB LIGHTS - 1 YEAR WARRANTY - USE WITH APPLE MOBILE OPERATING SYSTEMS - USE WITH ANDROID MOBILE OPERATING SYSTEMS 1.Search for WiFi contoller "LED net******"in your phone's WiFi network and connect it by inputing password "88888888" 2.Open "Magichpme WiFi app and wait while your phone scans for this wifi controller. 3.You have three ways to control your wifi controller: (F)Can I use many phones to control one WiFi controller? Yes,you can use 8 phones to control one WiFi controller In single mode ,one phone can control 1 pcs WiFi controller. In network mode ,how many WiFi controllers one phone can sync Control is same as how many devices one WiFi router can works with. Shop our whole line of Ignite Lighting on www.anjonmfg.com Input Rated Voltage: 12 V~,60Hz Cable length: 1M,SPT-2W,18AWG Max: 60 VA Waterproof Grade: IP68 Rated Power:DC12 V Please note:under normal circumastances ,the user connect the power max which not exceed 25W . The external cable or cord of this luminaire cannot be replaced; if the cord is damage, the luminaire shall be destroyed.The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. Monochromatic & RGB Controller 2 Seconds WIFI LIGHTING CONTROLLER See the full line of Ignite LED Lighting at CCWIFIRGB 3 Watt and 9 Watt RGB Lights Shop our whole line of Ignite Lighting on www.anjonmfg.com Please note:under normal circumastances ,the user connect the power max which not exceed 60W LED Lighting . The external cable or cord of this luminaire cannot be replaced; if the cord is damage, the luminaire shall be destroyed.The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person. ！ D C , 1 2 V I P 6 8 DC ,12 V 120V,60Hz AC ,12V 60W D C , 1 2 V I P 6 8 D C , 1 2 V I P 6 8 AC/DC,12V 5A 1M SPT-2W D C , 1 2 V I P 6 8 D C , 1 2 V I P 6 8 C , D 1 2 V I P 6 8 C D , 1 2 V I 8 P 6 DC,12V IP68 DC,12V IP68 D C , 1 2 V IP68 0.15M 1.5M 3 Watt RGB Lighting 3 Watt RGB Lighting RGB LIGHTING C , D 1 2 V I P 6 8 D C , 1 2 V I P 6 8 AD C ,2V C /1 WiFi CONTROLLER 2-PIN 2-PIN DC ,12V 4-PIN FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a …

Text truncated - open the document above for the full version.

Foshan Kemeng Technology Co., Ltd Agent Authorization Company: Foshan Kemeng Technology Co., Ltd Address: No.1 5/f New Factory Hongling Road, Shishan Town, Nanhai District Foshan Guangdong 528225 China Product Name: SMART Wifi LIGHTS CONTROLLER Trade Mark: Onforu Model Number: CCWIFIRGB, WIFI-03 FCC ID: 2A4WX-CCWIFIRGB We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2022-03-21 Name: yongfu huang Title: CEO Company: Foshan Kemeng Technology Co., Ltd

Foshan Kemeng Technology Co., Ltd No.1 5/f New Factory Hongling Road, Shishan Town, Nanhai District Foshan Guangdong 528225 China Product Similarity Declaration FCC ID: 2A4WX-CCWIFIRGB Model Number: CCWIFIRGB, WIFI-03 DATE: 2022-03-21 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Foshan Kemeng Technology Co., Ltd hereby declare that our product (SMART Wifi LIGHTS CONTROLLER) Model Number: CCWIFIRGB, WIFI-03 board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name / Title: yongfu huang / CEO Company Name: Foshan Kemeng Technology Co., Ltd Address: No.1 5/f New Factory Hongling Road, Shishan Town, Nanhai District Foshan Guangdong 528225 China Phone: 86-0757-85572025 Fax: 86-0757-81185925 E-Mail: [email protected]

Foshan Kemeng Technology Co., Ltd No.1 5/f New Factory Hongling Road, Shishan Town, Nanhai District Foshan Guangdong 528225 China Date: March 21, 2022 FCC ID: 2A4WX-CCWIFIRGB Model Number: CCWIFIRGB, WIFI-03 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, Foshan Kemeng Technology Co., Ltd declare that this EUT (FCC ID: 2A4WX-CCWIFIRGB) doesn’t have Ad Hoc mode function on “non-US/Canada frequencies”. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name / Title: yongfu huang / CEO Company: Foshan Kemeng Technology Co., Ltd Address: No.1 5/f New Factory Hongling Road, Shishan Town, Nanhai District Foshan Guangdong 528225 China Phone: 86-0757-85572025 Fax: 86-0757-81185925 E-Mail: [email protected]

Foshan Kemeng Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-03-21 Subject; Request for Confidentiality FCC ID: 2A4WX-CCWIFIRGB To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: yongfu huang Title: CEO

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 LABEL AND LOCATION Size: L2.0cm*W1.0cm Label Location FCC ID: 2A4WX-CCWIFIRGB

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Page 1 of 4 1. INTERIOR PHOTOGRAPHS Fig.1 Fig.2 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Page 2 of 4 Fig.3 Fig.4 2.4G WIFI Antenna Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Page 3 of 4 Fig.5 Fig.6 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Page 4 of 4 Fig.7 Fig.8

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 4 FCC RF Exposure Evaluation 1. Product Information FCC ID 2A4WX-CCWIFIRGB Product name SMART Wifi LIGHTS CONTROLLER Model number CCWIFIRGB Additional Model No. WIFI-03 Model Declaration PCB board, structure and internal of these model(s) are the same, So no additional models were tested Power supply For Adapter: Input: AC 120V 60Hz 70VA MAX Output: DC 12V 5A Hardware version ZJ-WF017-B V1.3 Software version Magic home pro (1.0.4) FCC Operation frequency 2412~2462 MHz Channel Number 11 Channels for 20MHz bandwidth (2412~2462MHz) Modulation Type IEEE 802.11b: DSSS (CCK, DQPSK, DBPSK) IEEE 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK) IEEE 802.11n: OFDM (64QAM, 16QAM,QPSK,BPSK) Antenna Type PCB Antenna Antenna Gain 1.5 dBi(Max.) Exposure category General population/uncontrolled environment EUT Type Production Unit Device Type Mobile Devices Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 4 2. Evaluation Method Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. In accordance with KDB447498D01 for Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modelled or measured field strengths or power density, is ≤ 1.0. The MPE ratio of each antenna is determined at the minimum test separation distance required by the operating configurations and exposure conditions of the host device, according to the ratio of field strengths or power density to MPE limit, at the test frequency. Either the maximum peak or spatially averaged results from measurements or numerical simulations may be used to determine the MPE ratios. Spatial averaging does not apply when MPE is estimated using simple calculations based on far-field plane-wave equivalent conditions. The antenna installation and operating requirements for the host device must meet the minimum test separation distances required by all antennas, in both standalone and simultaneous transmission operations, to satisfy compliance. 3. Limit 3. 1 Refer Evaluation Method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General 1 RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices 3. 2 Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 4 4. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 5. Antenna Information SMART Wifi LIGHTS CONTROLLER’S Antenna can only use antennas certificated as follows provided by manufacturer; Internal Identification Antenna type and antenna number Operate frequency band Maximum antenna gain Note 2.4G WIFI Antenna PCB Antenna 2412MHz-2462MHz 1.5 dBi 2.4G WIFI Antenna 6. Conducted Power <2.4GWLAN Max Conducted Power > Mode Channel Frequency(MHz) Max Conducted Power (dBm) IEEE 802.11b 1 2412 14.83 6 2437 14.13 11 2462 13.04 IEEE 802.11g 1 2412 15.50 6 2437 15.50 11 2462 15.52 IEEE 802.11n HT20 1 2412 15.07 6 2437 15.62 11 2462 15.37 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 4 7. Manufacturing Tolerance <2.4G WIFI> 11B (Peak) Channel Channel 1 Channel 6 Channel 11 Target (dBm) 15.0 14.0 14.0 Tolerance ±(dB) 1.0 1.0 1.0 11G (Peak) Channel Channel 1 Channel 6 Channel 11 Target (dBm) 16.0 16.0 16.0 Tolerance ±(dB) 1.0 1.0 1.0 11N20SISO (Peak) Channel Channel 1 Channel 6 Channel 11 Target (dBm) 16.0 16.0 16.0 Tolerance ±(dB) 1.0 1.0 1.0 8. Measurement Results 8.1 Standalone MPE As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from a…

Text truncated - open the document above for the full version.

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA Appendix A RF Test Data for 2.4G WIFI (Conducted Measurement) Product Name: SMART Wifi LIGHTS CONTROLLER Trade Mark: N/A Test Model: CCWIFIRGB Environmental Conditions Temperature: 25  C Relative Humidity: 50% ATM Pressure: 100.0 kPa Test Engineer: Kay Hu Supervised by: Li huan Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA Appendix A .1: 6dB Bandwidth Test Result TestMode Antenna Channel DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 8.040 2407.960 2416.000 0.5 PASS 2437 8.040 2432.960 2441.000 0.5 PASS 2462 8.040 2457.960 2466.000 0.5 PASS 11G Ant1 2412 16.320 2403.840 2420.160 0.5 PASS 2437 16.320 2428.840 2445.160 0.5 PASS 2462 16.360 2453.800 2470.160 0.5 PASS 11N20SISO Ant1 2412 17.040 2403.440 2420.480 0.5 PASS 2437 17.040 2428.440 2445.480 0.5 PASS 2462 17.040 2453.440 2470.480 0.5 PASS Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA Test Graphs 11B_Ant1_2412 11B_Ant1_2437 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11B_Ant1_2462 11G_Ant1_2412 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11G_Ant1_2437 11G_Ant1_2462 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11N20SISO_Ant1_2462 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA Appendix A.2: Occupied Channel Bandwidth Test Result TestMode Antenna Channel OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 10.906 2406.548 2417.454 --- --- 2437 10.994 2431.490 2442.484 --- --- 2462 11.023 2456.448 2467.471 --- --- 11G Ant1 2412 16.761 2403.632 2420.393 --- --- 2437 16.750 2428.587 2445.337 --- --- 2462 16.761 2453.587 2470.348 --- --- 11N20SISO Ant1 2412 17.662 2403.148 2420.810 --- --- 2437 17.653 2428.151 2445.804 --- --- 2462 17.660 2453.119 2470.779 --- --- Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA Test Graphs 11B_Ant1_2412 11B_Ant1_2437 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11B_Ant1_2462 11G_Ant1_2412 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11G_Ant1_2437 11G_Ant1_2462 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11N20SISO_Ant1_2462 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA Appendix A.3: Maximum conducted output power Test Result TestMode Antenna Channel Result[dBm] Limit[dBm] Verdict 11B Ant1 2412 14.83 ≤30.00 PASS 2437 14.13 ≤30.00 PASS 2462 13.04 ≤30.00 PASS 11G Ant1 2412 15.50 ≤30.00 PASS 2437 15.50 ≤30.00 PASS 2462 15.52 ≤30.00 PASS 11N20SISO Ant1 2412 15.07 ≤30.00 PASS 2437 15.62 ≤30.00 PASS 2462 15.37 ≤30.00 PASS Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA Test Graphs 11B_Ant1_2412 11B_Ant1_2437 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11B_Ant1_2462 11G_Ant1_2412 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11G_Ant1_2437 11G_Ant1_2462 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11N20SISO_Ant1_2462 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA Appendix A.4: Maximum power spectral density Test Result TestMode Antenna Channel Result[dBm/3kHz] Limit[dBm/3kHz] Verdict 11B Ant1 2412 -11.42 ≤8.00 PASS 2437 -12.3 ≤8.00 PASS 2462 -13.42 ≤8.00 PASS 11G Ant1 2412 -17.71 ≤8.00 PASS 2437 -17.48 ≤8.00 PASS 2462 -17.8 ≤8.00 PASS 11N20SISO Ant1 2412 -18.5 ≤8.00 PASS 2437 -17.7 ≤8.00 PASS 2462 -18.18 ≤8.00 PASS Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA Test Graphs 11B_Ant1_2412 11B_Ant1_2437 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11B_Ant1_2462 11G_Ant1_2412 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11G_Ant1_2437 11G_Ant1_2462 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11N20SISO_Ant1_2462 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA Appendix A.5: Band edge measurements Test Result TestMode Antenna ChName Channel RefLevel[dBm] Result[dBm] Limit[dBm] Verdict 11B Ant1 Low 2412 3.61 -47.12 ≤-16.39 PASS High 2462 1.71 -47.34 ≤-18.29 PASS 11G Ant1 Low 2412 -3.87 -44.64 ≤-23.87 PASS High 2462 -3.51 -46.9 ≤-23.51 PASS 11N20SISO Ant1 Low 2412 -3.97 -43.77 ≤-23.97 PASS High 2462 -3.82 -46.66 ≤-23.82 PASS Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA Test Graphs 11B_Ant1_Low_2412 11B_Ant1_High_2462 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11G_Ant1_Low_2412 11G_Ant1_High_2462 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA 11N20SISO_Ant1_Low_2412 11N20SISO_An…

Text truncated - open the document above for the full version.

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 37 FCC TEST REPORT For Foshan Kemeng Technology Co., Ltd SMART Wifi LIGHTS CONTROLLER Test Model: CCWIFIRGB Additional Model No.: WIFI-03 Prepared for : Foshan Kemeng Technology Co., Ltd Address : No.1 5/f New Factory Hongling Road, Shishan Town, Nanhai District Foshan Guangdong 528225 China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Shajing Street, Bao’an District, Shenzhen, Guangdong, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : February 25, 2022 Number of tested samples : 2 Sample number : 220224059A-1, 220224059A-2 Serial number : Prototype Date of Test : February 25, 2022 ~ March 21, 2022 Date of Report : March 21, 2022 Scan code to check authenticity Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 37 FCC TEST REPORT FCC CFR 47 PART 15 C(15.247) Report Reference No. ................ : LCS220224059AEA Date of Issue ................................. : March 21, 2022 Testing Laboratory Name ........... : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ......................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Shajing Street, Bao’an District, Shenzhen, Guangdong, China Testing Location/ Procedure ......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ........................ : Foshan Kemeng Technology Co., Ltd Address ......................................... : No.1 5/f New Factory Hongling Road, Shishan Town, Nanhai District Foshan Guangdong 528225 China Test Specification Standard ........................................ : FCC CFR 47 PART 15 C(15.247) Test Report Form No................... : LCSEMC-1.0 TRF Originator ............................... : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF .................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. EUT Description. ......................... : SMART Wifi LIGHTS CONTROLLER Trade Mark .................................... : N/A Test Model ..................................... : CCWIFIRGB Ratings .......................................... : For Adapter: Input: AC 120V 60Hz 70VA MAX Output: DC 12V 5A Result ........................................... : Positive Compiled by: Supervised by: Approved by: Lh Li/ Administrator Jin Wang/ Technique principal Gavin Liang/ Manager Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 37 FCC -- TEST REPORT EUT......................................... : SMART Wifi LIGHTS CONTROLLER Test Model............................... : CCWIFIRGB Applicant............................... : Foshan Kemeng Technology Co., Ltd Address.................................. : No.1 5/f New Factory Hongling Road, Shishan Town, Nanhai District Foshan Guangdong 528225 China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Foshan Kemeng Technology Co., Ltd Address................................... : No.1 5/f New Factory Hongling Road, Shishan Town, Nanhai District Foshan Guangdong 528225 China Telephone............................... : / Fax.......................................... : / Factory................................... : Foshan Kemeng Technology Co., Ltd Address................................... : No.1 5/f New Factory Hongling Road, Shishan Town, Nanhai District Foshan Guangdong 528225 China Telephone............................... : / Fax.......................................... : / Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS220224059AEA March 21, 2022 Date of issue Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 37 Revision History Report Version Issue Date Revision Content Revised By 000 March 21, 2022 Initial Issue --- Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Report No.: LCS220224059AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 37 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 6 1.1. DESCRIPTION OF DEVICE (EUT) ........................................................................................................................ 6 1.2. HOST SYSTEM CONFIGURATION LIST AND DETAILS ......................…

Text truncated - open the document above for the full version.

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Page 1 of 2 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement Fig. 1 Fig. 2 Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A4WX-CCWIFIRGB Page 2 of 2 1.2. Photo of AC Mains Conducted Emissions Fig. 3