2A52I-MR3Rivo3s

Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. User Manual Rivo Manual Table of Contents A. Basic A1. Appearance A2. Orientation and Button Names A3. Command Notation A4. Charging the Battery A5. Vertical Orientation B. Common B1. Power, Bluetooth Pairing, Keyboard Mode, Audio Mode B2. Locking Buttons, Status B3. Bluetooth Connection, Device Management B4. Media Shortcuts and Media Mode B5. Phone Mode B6. Phone Shortcuts B7. Setting Keyboards B8. Synchronizing Keyboards B9. Typing Text B10. Editing Text C. Apple iOS VoiceOver C1. Setting VoiceOver C2. Setting Rivo for VoiceOver C3. Quick Navigation Setting in the iPhone C4. Navigation Mode for VoiceOver D. Google Android TalkBack D1. Setting TalkBack D2. Setting Rivo for TalkBack D3. Navigation Mode for TalkBack E. Apple watchOS E1. Setting Rivo for watchOS E2. Commands for watchOS F. Basic Language Settings F1. Language Settings for English F2. Rivo QWERTY F3. ABC F4. Rivo Symbols A. Basic Mechanical Specifications Size: 98x52x9.5mm Weight: 52g USB-C type Charging Connector 3.5mm Audio Jack Electrical Specifications Battery: 3.7V Li-Poly 500mA Charging Time: 3hours Charging Input: Max 5V Storage: 32GB SD Operating Temp.: 0~ 60 Main Features Remote Smart Phone(Voiceover and Talkback) Send Call, Receive Call, ARS Keyboard Input MP3 Play Voice Recode and Call Record Voice And Vibrator Feedback Calculator, Braille Dictionary A1. Appearance A1.1. The size of Rivo is 94mm wide, 52mm high, 12mm thick, and weighs 55g. A1.2. There are 23 buttons on the front arranged in 4 rows and 5 columns and 3 more on left side. 4 buttons on the side. A1.3. Microphone is on the front left behind three tiny holes arranged vertically. A1.4. Speaker is on the front right behind a hollow vertical bar. A1.5. There are three small buttons on the top side; the one on the left is the POWER button, and the two buttons on the right are the KEYBOARD button and the AUDIO button from left to right. A1.6. On the bottom side, there are strap holes, and an earphone hole from left to right. A2. Orientation and Button Names A2.1. Rivo can be used in either horizontal or vertical orientation depending on the setting. A2.2. Horizontal orientation is the default, and even if Rivo is set to the vertical orientation, it will reset to the horizontal orientation when turned on. A2.3. The USB port is facing downwards in the horizontal orientation and facing right in the vertical orientation. A2.4. Horizontal orientation is assumed throughout the manual except where vertical orientation is introduced. A2.5. In horizontal orientation, buttons in Rivo are arranged in 4 rows and 5 columns. A2.6. Buttons in the leftmost column are L1, L2, L3, and L4 from top to bottom. A2.7. Buttons in the rightmost column are R1, R2, R3, and R4 from top to bottom. A2.8. Buttons in the middle three columns are 1 through 9, *, 0, and # arranged just like a telephone keypad. A2.9. The buttons on the top side are POWER, KEYBOARD, and AUDIO from left to right. A2.10. On the front, the microphone is left to L2 and L3, and the speaker is right to R2 and R3. A2.11. On the top side, POWER is above L1, KEYBOARD is above 3, and AUDIO is above R1. A2.12. On the bottom side, the USB port is below 0, and the earphone hole is below # and R4. A2.13. In vertical orientation, buttons in Rivo are arranged in 5 rows and 4 columns. A2.14. Buttons in the top row are T1, T2, T3, and T4 from left to right. A2.15. Buttons in the right column below T4 are D1, D2, D3, and D4 from top to bottom. A2.16. The other buttons are 1 through 9, *, 0 and # arranged just like a telephone keypad. A2.17. Note that only 5 is physically the same in horizontal and vertical orientations. A2.18. On the front, the speaker is above T2 and T3, and the microphone is below 0 and #. A2.19. On the left side, AUDIO is next to T1, KEYBOARD is next to 1 and POWER is next to *. A2.20. On the right side, the earphone hole is next to T4 and D1, and the USB port is next to D2. A3. Command Notation A3.1. Pressing a button is denoted by its button name for brevity. For example, 1 stands for pressing the button 1. A3.2. A sequence of button names separated by a comma denotes pressing the corresponding buttons successively as in the sequence. For example, 1, 2 stands for pressing button 1, followed by pressing button 2. A3.3. A plus sign after a button name denotes a combination of buttons. For example, L1 + 1 stands for holding down the button L1 and then pressing the button 1. A3.4. A plus sign after a button name followed by a sequence of button names separated by a comma denotes holding down the first button before the plus sign, pressing the other buttons successively as in the sequence, and then releasing the first button. For example, L1 + 1, 2 stands for holding down the button L1 and then pressing the buttons 1 and 2 successively, and then releasing L1. A4. Charging the Battery A4.1. Rivo is charged with a USB-C cable. It takes about 3 hours for a full charge and can be used for more than 15 days when only the keyboard is used. Using the audio or the phone function will shorten this time. A4.2. When Rivo is plugged to charge, there is a vibration and the red LED is turned on, which changes to GREEN with a vibration when fully charged. A4.3. To check the battery level, press POWER + KEYBOARD. The number of short vibrations indicates the battery level in 5 levels with 5 vibrations for full and 1 vibration for low. A4.4. When the battery level reaches below low, there are 2 short vibrations twice at a 10-second interval. A4.5. When the battery level is too low, Rivo turns off automatically. A5. Vertical Orientation A5.1. Rivo can be used in either the horizontal or the vertical orientation depending on the setting. A5.2. Horizontal orientation is the default, and even if Rivo is set in the vertical orientation, it will reset to horizontal orientation when turned on. A5.3. Buttons in horizontal orientation are directly mapped to corresponding buttons in …

Text truncated - open the document above for the full version.

Rivo Inc. 1-502, Startup Park, 204, Convensia-daero, Yeonsu-gu, Incheon, Republic of Korea Date: April, 28, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 ,Industry Canada c.c. Timco Engineering, Inc. Certification Division 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA FCC ID : 2A52I-MR3 To whom it may concern: I, the undersigned, hereby authorize Technical Manager Isaac Jin of DEKRA Korea Co., Lt d. and here after referred to as DEKRA Korea Co., Ltd. to act on our behalf in all manners r elating to application for equipment authorization, including signing of all documents rela ting to these matters. Any and all acts carried out by Technical Manager Isaac Jin of DEKRA Korea Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing DEKRA Korea Co., Ltd. as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding Rivo Inc. 1-502, Startup Park, 204, Convensia-daero, Yeonsu-gu, Incheon, Republic of Korea our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, ChiJung Kang / Director Rivo Inc. REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

Rivo Inc. 1-502, Startup Park, 204, Convensia-daero, Yeonsu-gu, Incheon, Republic of Korea Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2A52I-MR3 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics / Block Diagram / Operational Description / Parts List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. 2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days External Photos / Internal Photos / Test Setup Photos / User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and such information will be available for public review once the grant of equipment authorization is issued. Sincerely Yours, ChiJung Kang / Director Rivo Inc.

Declaration of Equivalence For declaration of equality between a product variant to be certified with reference to an original product. To be issued and signed by the company responsible for the product variant. Declare on our sole responsibility that the product - Original Model Product Information Product ID: MR3 are in all relevant parts identical to the product - Variant Model Product Information Product ID: MR3S - The difference between (original design) and (variant design) is : Hardware Hardware version is same. Software Software Version is same. - Variant model is completely same to original model We, the undersigned, hereby declare that the Second Manufacturer Design is identical in both design and implementation. Signed by Company Name : Rivo Inc. Korea / April 28, 2022 (Place, date of issue) (Signature / stamp) ChiJung Kang / Director

Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. External Photos Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. External Photos Front Rear Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. External Photos Left Right Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. External Photos Top Bottom

Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Label Informaion Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Label information Location&Drawing The location of the label is affixed to the rear of the product Location&Drawing(Variant) The location of the label is affixed to the rear of the product

Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Internal Photos Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Internal Photos PCB Front PCB Rear Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Internal Photos Inside Antenna Antenna

Tel.: +82-31-338-8837 Fax: +82-31-338-8847 Tel.: +82 70-4120-5402 Fax: +82 70-4120-5402 Incheon, Republic of Korea DEKRA Korea Co., Ltd. 498-2, Geumeo-ro, Pogok-eup, Rivo Inc. 1-502, Startup Park, 204, In the configuration tested, the EUT complied with the standards specified above. Issue toIssue by RF EXPOSURE REPORT Rivo3S MR3 MR3S 2A52I-MR3 Equipment Under Test Modle Name Variant Model Name FCC ID 2022. 03. 29Date of Issue Rivo Inc. 2022. 03. 24 ~ 2022. 03. 28 Manufacturer Date of Test(s) - Rivo Inc. IC Number Applicant Cheoin-gu, Yongin-si, Gyeonggi-do, 17030, Rep. of Korea Convensia-daero, Yeonsu-gu, Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. RF EXPOSURE KDB447498 was used as the guidance. SAR test exclusion considerations Step.1 For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion threshold are determined by the following : The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm, and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 4.1 f) is applied to determine SAR test exclusion. The values 3.0 and 7.5 are referred to as numeric thresholds in step b) below [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Step.2 For 100 MHz to 6 GHz and test separation distances > 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following {[Power allowed at numeric threshold for 50 mm in step a)] + [(test separation distance – 50 mm)· (f(MHz)/150)]} mW, for 100 MHz to 1500 MHz {[Power allowed at numeric threshold for 50 mm in step a)] + [(test separation distance – 50 mm)·10]} mW, for > 1500 MHz and ≤ 6 GHz Step.2-1 Step.2-2 Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. ( SAR test exclusion considerations : Bluetooth EDR - Frequency Range :2 402 MHz~2 480 MHz - Measured RF Maximum Output Power (Peak) :7.38 dBm - Target Power & Tolerance :6.50 dBm&±1.00 dB (Maximum :7.50 dBm&Minimum :5.50 dBm) - Maximum Output Power for the Calculation :7.50 dBm The EUT will only be used with a separation of 50 millimeters or lesser between the antenna and the body of the SAR Exclusion calculation for this exposure is shown below. - P=7.50dBm- NOTE =5.62mW P : Max tuneup Power (dBm) Power Density at the specific separation - S= [(P(mW) / R)] X [√f(GHz)] - NOTE f(GHz) : the RF channel transmit frequency in GHz RF Exposure Compliance Issue Therefore, EUT is not required the SAR Evaluation. ]S : Maximum Power Density =1.771 15P(mW) : Max tuneup Power (mW) R : Distance to the center of the radiation of the NOTE : f(GHz) was used as worst case is highest frequency.antenna5.00mm ) =[(5.62/5.00)]X[√( 2.48 ) Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. ( Minimum :7.00 dBm) SAR test exclusion considerations : Bluetooth LE - Frequency Range :2 402 MHz~ f(GHz) : the RF channel transmit frequency in GHz RF Exposure Compliance Issue Therefore, EUT is not required the SAR Evaluation. ]S : Maximum Power Density =2.501 82P(mW) : Max tuneup Power (mW) R : Distance to the center of the radiation of the NOTE : f(GHz) was used as worst case is highest frequency.antenna5.00mm ) =[(7.94/5.00)] - P=9.00dBm- NOTE X[√( 2.48 ) =7.94mW P : Max tuneup Power (dBm) Power Density at the specific separation - S= [(P(mW) / R)] X [√f(GHz)] - NOTE (Maximum :9.00 dBm& - Maximum Output Power for the Calculation :9.00 dBm The EUT will only be used with a separation of 50 millimeters or lesser between the antenna and the body of the SAR Exclusion calculation for this exposure is shown below. 2 480 MHz - Measured RF Maximum Output Power (Peak) :8.62 dBm - Target Power & Tolerance :8.00 dBm&±1.00 dB Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Therefore, EUT is not required the SAR Evaluation. 1.771 15 2.501 82 Bluetooth EDR + Bluetooth LE The EUT will only be used with a separation of 50 millimeters or lesser between the antenna and the body of the SAR Exclusion calculation for this exposure is shown below. Bluetooth EDR + Bluetooth LE - P=5.62mW - NOTE Bluetooth EDR + Bluetooth LE=13.57mW Bluetooth EDR = Bluetooth LE = 5.62 7.94 mW mW Bluetooth EDR = Bluetooth LE = RF Exposure Compliance Issue Power Density at the specific separation - NOTE Bluetooth EDR + Bluetooth LE - S=1.771 15+2.501 82 =4.272 97 +7.94mW SAR test exclusion considerations : Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved.

DEKRA Korea Co., Ltd. Report Number: YI-QA-22-RF-I007 YI-QA-P016-04(0) Page : (1) of (34) Effective Data : 2022.01.06 FCC Part 15 Subpart B&C §15.247 RSS-247 Issue 2 Test Report Equipment Under Test Rivo3s Model Name MR3 Variant Model Name MR3S FCC ID 2A52I-MR3 IC Number - Applicant Rivo Inc. Manufacturer Rivo Inc. Date of Test(s) 2022. 03. 24 ~ 2022. 03. 28 Date of Issue 2022. 03. 29 The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full Issue to Issue by Rivo Inc. 1-502, Startup Park, 204, Convensia-daero, Yeonsu-gu, Incheon, Republic of Korea Tel.: +82 70-4120-5402 Fax: +82 70-4120-5402 DEKRA Korea Co., Ltd. 498-2, Geumeo-ro, Pogok-eup, Cheoin-gu, Yongin-si, Gyeonggi-do, 17030, Rep. of Korea Tel.: +82 31-338-8837 Fax: +82 31-338-8847 DEKRA Korea Co., Ltd. Report Number: YI-QA-22-RF-I007 YI-QA-P016-04(0) Page : (2) of (34) Effective Data : 2022.01.06 Revision history Revision Date of issue Description Revised by -- 2022.03.29 Initial - -- DEKRA Korea Co., Ltd. Report Number: YI-QA-22-RF-I007 YI-QA-P016-04(0) Page : (3) of (34) Effective Data : 2022.01.06 Table of contents 1. Applicant Information ................................................................................................... 4 2. Laboratory Information ................................................................................................. 4 3. Summary of test results................................................................................................ 5 4. EUT Description ............................................................................................................ 6 5. Measurement equipment .............................................................................................. 7 6. Antenna Requirement ................................................................................................... 8 7. DTS bandwidth & 99% bandwidth measurement ....................................................... 9 8. Maximum peak conducted output power .................................................................. 13 9. Peak power spectral density ...................................................................................... 17 10. Transmitter radiated spurious emissions and conducted spurious emissions .. 20 11. AC Conducted power line test ................................................................................. 32 DEKRA Korea Co., Ltd. Report Number: YI-QA-22-RF-I007 YI-QA-P016-04(0) Page : (4) of (34) Effective Data : 2022.01.06 1. Applicant Information 1.1. Details of applicant Applicant : Rivo Inc. Address : 1-502, Startup Park, 204, Convensia-daero, Yeonsu-gu, Incheon, Republic of Korea Contact Person : ChiJung Kang Telephone : +82 70-4120-5402 Fax : +82 70-4120-5402 1.2. Manufacturer Information Manufacturer : Rivo Inc. Address : 1-502, Startup Park, 204, Convensia-daero, Yeonsu-gu, Incheon, Republic of Korea 2. Laboratory Information Company name : DEKRA Korea Co., Ltd. Test site number : FCC (KR0151), IC (24841) Address : 498-2, Geumeo-ro, Pogok-eup, Cheoin-gu, Yongin-si, Gyeonggi-do, 17030, Rep. of Korea Web site : http://www.dekra.kr Telephone : +82 31-338-8837 Facsimile +82 31-338-8847 DEKRA Korea Co., Ltd. Report Number: YI-QA-22-RF-I007 YI-QA-P016-04(0) Page : (6) of (34) Effective Data : 2022.01.06 4. EUT Description Kind of product Rivo3S Model Name MR3 Variant Model Name MR3S FCC ID 2A52I-MR3 IC Number - Power supply DC 3.70 V Frequency range 2 402 MHz ~ 2 480 MHz Modulation technique GFSK Number of channels 40 ch Antenna gain / Type 1.99 dBi / Chip Antenna Test Site Registration Number FCC (KR0151), IC (24841) H/W version / S/W version 1.0 / 1.0 Test S/W version 3.2.3(Qualcomm BlueSuite) 4.1. Table for Test Modes and Frequency The following table is a list of the test modes shown in this test report. Mode Data rate Frequency (Freq. MHz) Bluetooth LE 1 Mbps Lowest (2 402) / Middle (2 440) / Highest (2 480) DEKRA Korea Co., Ltd. Report Number: YI-QA-22-RF-I007 YI-QA-P016-04(0) Page : (7) of (34) Effective Data : 2022.01.06 5. Measurement equipment Equipment Manufacturer Model Serial number Calibration Interval Calibration date Calibration due. Test Receiver R&S ESVS30 829673/015 1 year 2021-11-22 2022-11-22 Signal Generator R&S SMB100A 178128 1 year 2021-05-17 2022-05-17 Spectrum Analyzer R&S FSV-40 100832 1 year 2021-05-17 2022-05-17 DC Power Supply R&S NGE100 102415 1 year 2021-06-24 2022-06-24 Power Meter Agilent E4416A GB41290645 1 year 2021-05-18 2022-05-18 Power Sensor Agilent 9327A US40441490 1 year 2021-05-18 2022-05-18 Horn Antenna R&S HF906 100236 2 year 2020-04-01 2022-04-01 Horn Antenna AH Systems SAS-572 269 1 year 2021-05-21 2022-05-21 Horn Antenna AH Systems SAS-573 164 1 year 2021-04-29 2022-04-29 Bi-Log Ant. S/B VULB 9161SE 4159 2 year 2020-03-30 2022-03-30 Loop Antenna ETS LINDGREN 6502 00118166 2 year 2020-06-30 2022-06-30 Power Amplifier TESTEK TK-PA18H 170013-L 1 year 2021-05-17 2022-05-17 Power Amplifier MITEQ AFS43-01002600 2048519 1 year 2021-05-18 2022-05-18 Power Amplifier MITEQ AMF-6F-2600400 0-33-8P-HS 1511665 1 year 2021-05-18 2022-05-18 Fixed Attenuator Weinschel 54A-10 80303 1 year 2021-10-26 2022-10-26 Controller INNCO CO2000 CO2000/064/6961003/L N/A N/A N/A Antenna Master INNCO MA4000 MA4000/038/6961003/L N/A N/A N/A Controller INNCO CO3000 CO3000/812/34240914/L N/A N/A N/A Antenna Master INNCO MA4640-XP-ET None N/A N/A N/A RF Cable SUHNER SUCOFLEX100 84047746 3 month 2022-03-25 2022-06-25 RF Cable SUHNER SUCOFLEX102 801270/2 3 month 2022-03-25 2022-06-25 RF Cable SUHNER SUCOFLEX102 801532/2 3 month 2022-03-25 2022-06-25 Band Rejection Filter Micro-Tonics BRM50702 064 1 year 2021-05-18 2022-05-18 Test Receiver R&S ESR3 101873 1 year 2021-05-17 2022-05-17 Pulse Limiter R&S ESH3-Z2 100288 1 year 2021-05-17 2022-05-17 Two Line-V-Network R&S ESH3-Z5 100296 1 year 2021-11-22 2022-11-22 Power Divider HP 11636B 12481 1 year 2021-…

Text truncated - open the document above for the full version.

Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Test Setup Photos Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Test Setup Photos Radiated Emission_9 kHz ~ 30 MHz Test distance : 3 m, height of table : 0.8 m Radiated Emission_30 MHz ~ 1 GHz Test distance : 3 m, height of table : 0.8 m Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Test Setup Photos Radiated Emission_1 GHz ~ 18 GHz Test distance : 3 m, height of table : 1.5 m Radiated Emission_Above 18 GHz Test distance : 3 m, height of table : 1.5 m Copyright ⓒ DEKRA Korea Co., Ltd. All rights Reserved. Test Setup Photos AC Conducted Power Line