2A55Q-DU-W01WPet Water Fountain

Pet Water Fountain Please Read the Manual Carefully Before Using the Product User Manual Basic Type Food tank capacity: 3L Power supply: DC 5V/1A power adapter Power adapter: AC110-240V input, DC5V output G.W.: 1.15kg Size: 245x196x194mm BC-111-D Specification We offer 1 year warranty for this device. If you have any questions, please contact the dealer or customer service. We will reply you as soon as possible. Warranty Safety Instruction 1.Children must be accompanied by adults to use it. 2.When cleaning the water fountain, do not directly wash the bottom with water ,which will easily cause a short circuit at the bottom. 3.lf the water fountain can not work or have damaged accessories, do not try to repair it by yourself, please contact the seller immediately and solve it. 4.Please make sure the the water fountain is unplug and power off when not using or before cleaning. 5.lf the power plug gets wet, please turn off the socket power rather than trying to unplug the power plug. 6.Please use the water fountain on a level ground or place it to the corner of the wall to prevent pets from falling over. Product Image Top view Water outlet Water tank Indicator Light Button Back view Type-C Interface Packing List After opening the product package, please confirm whether the machine is in good condition. Please check the list to confirm whether the accessories are complete. User Manual Wireless Pet Water FountainPower Adapter Filter CoreUser Manual Q: Why obviously there is water in the bucket, it can not come out of the water? A：The water pump has a certain height, the amount of water is too small, it can not cover the surface of the water pump, please make sure that the water level can cover the entire pump when using. Q: Why does water come out of the dispenser even when I pass by or near it myself? A：This induction system is effective for mobile living bodies, does not distinguish between living species. Q: Can I use my home computer charger or other Type-C to charge my water dispenser? A：In order to protect the safety and effectiveness of electronic components, electrical appliances have a limited input current; our water dispenser limits the input specifications to 5V-1A, in the process of using the recommended use of the original adapter, such as the need for other adapters, you need to check the specifications are consistent. Q: When cleaning, can I flush the part with buttons? A：The button part with precision components, can not be directly immersed in water for cleaning, such as water beads or slight sprinkles, etc., need to be wiped dry in time. Guide to Frequently Asked Questions Q: How long can I use the product without plugging it in? A： According to the mode of water dispensing and the frequency and length of water dispensing, the power consumption of the product will be different. According to the actual test of Duodu Pet Lab, under the mode of sensing water dispensing, the product can last for about 30 days or more (according to the number of times the cat is close to the water and the length of time there will be differences). Q: How to determine the battery is almost out of power? A：You can check the right side of the indicator, when the indicator light is always red, the battery power is low, you need to charge in time. Q: Why is it dirtier when dogs use it than when cats use it? A：Because cats and dogs drink water in a very different way, dogs drink water, saliva and so on will flow into the water, increase the water material, will be more easily dirty than cats use. It is recommended that the frequency of cleaning the water dispenser is no less than 3 days/times for families where dogs use it. Or when adding water, at the same time for cleaning, to maintain clean water quality and water dispenser of healthy water. Q: Why does my water dispenser not dispense water after a period of time? A：Although the filter element has the effect of filtering debris, but if you do not clean up for a long time, the surface of the filter element will be covered with more pet hair and impurities, blocking the filter cotton, can not be good filtration of the inflow of water, and then there will be impurities and pet hair flowing into the water tank, in the process of water, impurities or hair will block the pump. In such cases, please replace the filter element in time and clean the water dispenser, note that the water pump also needs to be cleaned to. Q: Why can't water come out instantly when my pet arrives near the water dispenser? A：The sensor in the pet to reach the sensor distance, the need to transmit data for analysis, there will be a certain time (1-3) seconds of delay, is normal. After placing the cartridge, align the top cap spout tube with the water basin and install the shower. White Filter Cotton Water Fountain Stainless Steel Bowl Flower Spout Place the unit on a level surface, open the cap on top of the water tank and add appropriate mineral or tap water, with the water level not exceeding the visible window. Child lock (long press for 3 seconds) 1) No operation for 15 seconds, the device is automatically locked. 2) When the device is locked, press and hold for 3 seconds, the device will be unlocked with "didi". Water Flow Mode Continuous water dispensing Water flows continuously when plugged in. (Only available when plugged in, short press button to switch) Sensor water dispensing Water comes out after every interval (short press of the button to switch) Combined Mode (Sensor + Intermittent) Sensor mode and intermittent mode exist at the same time. Water can be triggered by sensing and at the same time water flows at intervals. (Only available when plugged in, short press button to switch) Intermittent water dispensing Water flows once after a certain period of time (press the button briefly to switch) Mode shift button (short press once) Unlocked state, every short press, switch a mode: sensor water / intermittent water / combined mode / continuous water) Left: Water flow i…

Text truncated - open the document above for the full version.

U.S. AGENT LETTER OF ATTESTATION Date: 2024-02-22 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2A55Q-DU-W01W Huizhou Dudu Pet Products Co., ltd certifies that, as of the date of the filing of the application, Baihetian Innovative Solutions is our designated U.S. agent for service of process for the above referenced FCC ID. Huizhou Dudu Pet Products Co., ltd accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Baihetian Innovative Solutions accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: Baihetian Innovative Solutions Address: 6837 Chase Rd, Dearborn, MI 48126 FRN: 0033401605 Tel.: 313-395-3113 Email: [email protected] Signed by (printed name): Kenneth Young Signature: Applicant: Huizhou Dudu Pet Products Co., ltd Address: Floor 2/3/4, Building 2 District D Qiaosheng Industrial Park, Lilin Town, Huicheng District, Huizhou China FRN: 0032188674 Tel: 18124747060 Email: [email protected] Signed by (printed name): ANN HU Signature:

Huizhou Dudu Pet Products Co., ltd Address:Floor 2/3/4, Building 2 District D Qiaosheng Industrial Park, Lilin Town,Huicheng District, Huizhou, China Tel.:18124747060 E-mail:[email protected] Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-02-22 FCC ID: 2A55Q-DU-W01W Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Huizhou Dudu Pet Products Co., ltdcertifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Huizhou Dudu Pet Products Co., ltd certifies that, as of the date of the filing of the application, the applicant is notidentified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates)as an entity producing “covered” equipment. Applicant: Huizhou Dudu Pet Products Co., ltd Address: Floor 2/3/4, Building 2 District D Qiaosheng Industrial Park, Lilin Town,Huicheng District, Huizhou, China Contact Person: ANN HU/Human Resources Specialist Tel.: 18124747060 Email: [email protected] Sincerely, Signature:

AntennaSpecification Manufacture：TUYA ProductName：WBR3Antenna AntennaType：PCB TestDate：2021.05.20 Testedby：LongWang Approvedby：Licco Content 1.GeneralDescription.................................................................................1 2.TestConfigurations...................................................................................2 2.1TestEnvironment............................................................................2 2.2TestEquipment...............................................................................2 2.3TestPrinciple...................................................................................2 3.TestResults..............................................................................................3 3.1GainandEfficiency..........................................................................3 3.2RadiationPattern............................................................................4 4.AntennaDimensions................................................................................6 5.EUTPhoto................................................................................................6 6.TestSetupPhoto......................................................................................7 1 1.GeneralDescription ManufacturerHangzhouTuyaInformationTechnologyCo.,Ltd Address Room701,Building3,MoreCenter,No.87GuDunRoad, Hangzhou,Zhejiang,China TestLocation Room106,Building3,LetongSciencePark,No.500, QiuyiRoad,BinjiangDistrict,Hangzhou ProductNameWBR3Antenna Productmodel WBR3 AntennaType PCBAntenna TestItems Gain;Efficiency;RadiationPattern TestFrequency 2400-2500MHz TestStandard ANSI/IEEEStd149-1979 2 2.TestConfigurations 2.1TestEnvironment Temperature(°C)25 Humidity(%RH)60 AtmosphericPressure(kPa)100.5 2.2TestEquipment TestSystemTEM24Multi-probeMicrowaveChamber TestInstrumentAgilentE5071B 2.3TestPrinciple 3 3.TestResults 3.1GainandEfficiency Frequency(MHz)PeakGain(dBi)Efficiency(%) 2400 1.6252.29 2410 1.7152.17 2420 1.9353.14 2430 1.9854.16 2440 2.0057.62 2450 2.1759.64 2460 2.4561.55 2470 2.3860.64 2480 2.5462.86 2490 2.3059.85 2500 2.4960.41 4 3.2RadiationPattern Phi02D Phi902D 5 Theta902D 2480MHz3D 6 4.AntennaDimensions 5.EUTPhoto 7 6.TestSetupPhoto

Huizhou Dudu Pet Products Co., ltd Address:Floor 2/3/4, Building 2 District D Qiaosheng Industrial Park, Lilin Town,Huicheng District, Huizhou, China Tel.:18124747060 E-mail:[email protected] Date：2024-02-22 Product Model Number: DU-W01W FCC ID: 2A55Q-DU-W01W To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out byORGANIZATION. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite ANN HU Title: Human Resources Specialist Email: [email protected] Telephone: 18124747060 On behalf of: Huizhou Dudu Pet Products Co., ltd

Huizhou Dudu Pet Products Co., ltd Address:Floor 2/3/4, Building 2 District D Qiaosheng Industrial Park, Lilin Town,Huicheng District, Huizhou, China Tel.:18124747060 E-mail:[email protected] Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 26, 2024 Subject; Request for Confidentiality FCC ID: 2A55Q-DU-W01W To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name:ANN HU Title:Human Resources Specialist

Huizhou Dudu Pet Products Co., ltd Address: Floor 2/3/4, Building 2 District D Qiaosheng Industrial Park, Lilin Town,Huicheng District, Huizhou, China Tel.:18124747060 E-mail:[email protected] Date: 2024-02-22 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attestation letter Dear Sir or Madam, Our product Pet Water Fountain, model: DU-W01W, for marketing purpose, this product only supports BLE 1M, 2.4GWi-Fi (2412-2462MHz, 802.11b/g/n20 modes). The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely, Signature ANN HU Human Resources Specialist

China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-EXP Page 1 of 5 EUT EXTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-EXP Page 2 of 5 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-EXP Page 3 of 5 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-EXP Page 4 of 5 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-EXP Page 5 of 5

China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-INP EUT INTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-INP China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-INP China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-INP China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-INP China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-INP China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-INP Antenna

China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-00A Page 50 of 53 5. RF EXPOSURE EVALUATION 5.1 Simultaneous Transmission with both MPE-based 5.1.1 Applicable Standard According to §1.1307(b)(3)(i) (C) Or using Table 1 and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). Table 1 to § 1.1307(b)(3)(i)(C) - Single RF Sources Subject to Routine Environmental Evaluation RF Source frequency (MHz) Threshold ERP (watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-00A Page 51 of 53 5.1.2 Measurement Result Radio Frequency (MHz) λ/2 Π (mm) Distance (mm) Exemption ERP (mW) Maximum Conducted Power including Tune-up Tolerance (dBm) Antenna Gain (dBi) ERP dBmmW BLE 2402-2480 19.89 200 768 2.0 2.54 2.39 1.73 Wi-Fi 2412-2462 19.81 200 768 25.5 2.54 25.89 388.15 Note: The Maximum Conducted Power including Tune-up Tolerance was declared by manufacturer. The Wi-Fi and BLE can’t transmit simultaneously. Result: The device compliant the MPE-Based Exemption at 20cm distances.

China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-00B Page 63 of 66 5. RF EXPOSURE EVALUATION 5.1 Simultaneous Transmission with both MPE-based 5.1.1 Applicable Standard According to §1.1307(b)(3)(i) (C) Or using Table 1 and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). Table 1 to § 1.1307(b)(3)(i)(C) - Single RF Sources Subject to Routine Environmental Evaluation RF Source frequency (MHz) Threshold ERP (watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-00B Page 64 of 66 5.1.2 Measurement Result Radio Frequency (MHz) λ/2 Π (mm) Distance (mm) Exemption ERP (mW) Maximum Conducted Power including Tune-up Tolerance (dBm) Antenna Gain (dBi) ERP dBmmW BLE 2402-2480 19.89 200 768 2.0 2.54 2.39 1.73 Wi-Fi 2412-2462 19.81 200 768 25.5 2.54 25.89 388.15 Note: The Maximum Conducted Power including Tune-up Tolerance was declared by manufacturer. The Wi-Fi and BLE can’t transmit simultaneously. Result: The device compliant the MPE-Based Exemption at 20cm distances.

TEST REPORT Applicant: Huizhou Dudu Pet Products Co., ltd Address: Floor 2/3/ 4, Building 2 District D Qiaosheng Industrial Park, Lilin Town, Huicheng District, Huizhou, China FCC ID: 2A55Q-DU-W01W Product Name: Pet Water Fountain Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR231273322-00A Date Of Issue: 2024/02/01 Reviewed By: Calvin Chen Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-00A Page 2 of 53 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-00A Page 3 of 53 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition: ............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 8 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 2. SUMMARY OF TEST RESULTS .......................................................................................... 10 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 11 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 11 3.1.1 Applicable Standard ..................................................................................................................................... 11 3.1.2 EUT Setup.................................................................................................................................................... 12 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 12 3.1.4 Test Procedure ............................................................................................................................................. 13 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 13 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 14 3.2.1 Applicable Standard ..................................................................................................................................... 14 3.2.2 EUT Setup.................................................................................................................................................... 14 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 15 3.2.4 Test Procedure ............................................................................................................................................. 15 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 16 3.3 MINIMUM 6 DB BANDWIDTH ............................................................................................................. 17 3.3.1 Applicable Standard ..................................................................................................................................... 17 3.3.2 EUT Setup.................................................................................................................................................... 17 3.3.3 Test Procedure ..............................................…

Text truncated - open the document above for the full version.

TEST REPORT Applicant: Huizhou Dudu Pet Products Co., ltd Address: Floor 2/3/ 4, Building 2 District D Qiaosheng Industrial Park, Lilin Town, Huicheng District, Huizhou, China FCC ID: 2A55Q-DU-W01W Product Name: Pet Water Fountain Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR231273322-00B Date Of Issue: 2024/02/01 Reviewed By: Calvin Chen Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-00B Page 2 of 66 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR231273322-00B Page 3 of 66 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition: ............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 8 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 2. SUMMARY OF TEST RESULTS .......................................................................................... 10 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 11 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 11 3.1.1 Applicable Standard ..................................................................................................................................... 11 3.1.2 EUT Setup.................................................................................................................................................... 12 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 12 3.1.4 Test Procedure ............................................................................................................................................. 13 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 13 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 14 3.2.1 Applicable Standard ..................................................................................................................................... 14 3.2.2 EUT Setup.............................................................................................…

Text truncated - open the document above for the full version.