2A58G-DKB1DK-B1

1 Alif Semiconductor USA, Inc. 7901 Stoneridge Drive, Suite 300 Pleasanton, CA 94588 www.alifsemi.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 29, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i)&(ii) Filing FCC ID: 2A58G-DKB1 Statement for 47 CFR section 2.911(d)(5)(i) [Alif Semiconductor, Inc] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment and does not contain anti-virus software or cybersecurity software prohibited from receiving an equipment authorization pursuant to 47 CFR 2.903, KDB 986446 D01 Covered Equipment Guidance, and FCC Covered List (www.fcc.gov/supplychain/coveredlist). Statement for 47 CFR section 2.911(d)(5)(ii) [Alif Semiconductor, Inc] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to §1.50002, as a specifically named entity or any of its subsidiaries or affiliates that producing “covered” equipment. Sincerely, Signature: ____________________ Printed Name /Title: Kshitij Vyas / Wireless Carrier Certification Technical Manager Company Name: Alif Semiconductor, Inc Docusign Envelope ID: 663A733B-F6E5-81E0-81F3-F4B4D6AC5447

1 Alif Semiconductor USA, Inc. 7901 Stoneridge Drive, Suite 300 Pleasanton, CA 94588 www.alifsemi.com Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 5, 2026 Ref: Attestation Statements Part 2.911(d)(7) Filing [Alif Semiconductor, Inc ] (“the applicant”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Sincerely, Grantee Code: 2A58G FRN: 0031374853 Company Name: Alif Semiconductor, Inc Contact Person: Kshitij Vyas Address: 7901 Stoneridge Dr, STE 300, Pleasanton, California 94588, United States Tel.: 4158238448 Email: [email protected] Applicant Signature: Docusign Envelope ID: 0089DD5F-9C0C-800F-81E9-C5C17E40DA18

1 Alif Semiconductor USA, Inc. 7901 Stoneridge Drive, Suite 300 Pleasanton, CA 94588 www.alifsemi.com Date: July 5, 2026 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding FCC ID: 2A58G-DKB1 To whom it may concern: We, the undersigned, hereby authorize Blue Yang, SGS Taiwan Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Agency Agreement Expiration Date: June 22, 2027 This authorization is valid until further written notice from the applicant. Sincerely, Signature: ____________________ Printed Name /Title: Kshitij Vyas / Wireless Carrier Certification Technical Manager Company Name: Alif Semiconductor, Inc Docusign Envelope ID: 2547C027-6155-8404-8184-56D91D8EFEB6

1 Alif Semiconductor USA, Inc. 7901 Stoneridge Drive, Suite 300 Pleasanton, CA 94588 www.alifsemi.com Date: June 29, 2026 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: 2A58G-DKB1 Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view for a period of (180) days. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term Operation Description ☒ Permanent ☐ Short Term Software defined radio Security Description ☐ Permanent ------------------ Parts List & Placement/BOM ☐ Permanent ☐ Short Term Tune-Up Procedure ☐ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☒ Short Term Internal Photos ☐ Permanent* ☒ Short Term Test Setup Photos ------------------ ☒ Short Term User’s Manual ☐ Permanent* ☒ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have “Permanent” confidentiality as shown above need not be repeated under Short-Term confidentiality request. Docusign Envelope ID: E686F51A-EAC5-8756-83B3-A299C7BB816D 2 Alif Semiconductor USA, Inc. 7901 Stoneridge Drive, Suite 300 Pleasanton, CA 94588 www.alifsemi.com Sincerely, Signed: _______________________ Printed Name: Kshitij Vyas Title: Wireless Carrier Certification Technical Manager Company Name: Alif Semiconductor, Inc Docusign Envelope ID: E686F51A-EAC5-8756-83B3-A299C7BB816D

E-Label information 1. Images of the e-label screen are provided below: FCC ID: 2A58G-DKB1 IC: 35789-DKB1 Model: DK-B1 2. This device does not have an integrated screen and must be connected to a computer or laptop via USB for operation. 3. Device Setup Connect the device to a computer or laptop using a USB cable. Open a terminal application. Select the appropriate COM port and set the baud rate to 115200. Wait until the UART wording is displayed. 4. FCC E-label a) Enter the command "cert". b) Select "1. DevKit". c) Select "1. FCC". 5. ISED E-label a) Enter the command "cert". b) Select "1. DevKit". c) Select "2. ISED". 6. Users are able to access the information in no more than 3 steps in the device’s menu. 7. Electronic labeling information is programmed into the device by the manufacturer at the time of manufacture. 8. Electronic labeling information is not modifiable by any third party, and the FCC ID and required regulatory information are displayed electronically in a manner that is clearly legible without the aid of magnification. 9. A temporary removable adhesive label will be used on the product packaging.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2606000397ES Page: 1 of 8 RF EXPOSURE REPORT Applicant: Alif Semiconductor, Inc. 7901 Stoneridge Dr STE300, Pleasanton, CA 94588 Manufacturer: Alif Semiconductor, Inc. 7901 Stoneridge Dr STE300, Pleasanton, CA 94588 Product Name: DK-B1 Brand Name: Balletto Devkit Model No.: DK-B1 FCC ID 2A58G-DKB1 IC: 35789-DKB1 Date of EUT Received: Jun. 02, 2026 Issue Date: Jun. 24, 2026 Approved By John Yeh We hereby certify that: The above equipment was evaluated by SGS Taiwan Ltd. The evaluation in this report is in compliance with FCC Rule Part §2.1093, KDB 447498 D01 v06 and RSS-102 issue 6. The results of this report relate only to the sample identified in this report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2606000397ES Page: 2 of 8 Revision History Report Number Revision Description Issue Date Revised By Remark TESA2606000397ES 00 Original Jun. 24, 2026 Cindy Chou Note: 1、 The remark "*" indicates modification of the report upon requests from certification body. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2606000397ES Page: 3 of 8 Table of Contents 1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................ 4 1.1 Product Description .................................................................................................... 4 1.2 Evaluation site ............................................................................................................ 4 2 rf EXPOSURE EVALUATION FOR PORTABLE CONDITIONS................................ 5 2…

Text truncated - open the document above for the full version.

2.45 GHz SMD Chip Antenna, AEC-Q200 QualifiedP/N 2450AT43A100E-AEC Detail Specification: Page 1 of 8 *Efficiency measured on Johanson Evaluation Board L±± W±± T a±± https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 2022 Johanson Technology, Inc. All Rights Reserved 1,000 +5 to +35°C Humidity 45 - 75% RH 18 months max. -40 to +105°C Mounting Style Layout #1: VerticalLayout #2: Horizontal 2.0 typ. (XZ-V) 1.0 typ. (XZ-V) 86% Average 9.5 min. 2 max. (CW) 50 2.0 typ. (XZ-V) 0.5 typ. (XZ-V) 75% Average Part Number Explanation 100% Tin P/N Suffix Packing Style Evaluation Board e.g. 2450AT43A100S-AEC e.g. 2450AT43A100E-AEC e.g. 2450AT43A100(E or S)-AEC No. 1 2 Function RF Feeding Point NC Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. High Frequency Ceramic Solutions 8/10/2022 Part Number Frequency Range (MHz)2400 - 2500 2450AT43A100E-AEC General Specifications In 7.00 2.00 +.004 / -.0080.031 0.20 0.20 +0.10 / -0.20 0.30 Bulk (loose pcs) T & R Layout Recommendation #1: Vertical Mounting - 2450AT43A100-EB1SMA, see page 2 Layout Recommendation #2: Horizontal Mounting - 2450AT43A100-EB2SMA, see page 5 Mechanical DimensionsTerminal Configuration 0.80 0.50 Return Loss (dB) Impedance (Ω) Input Power (W) Operating Temperature Recommended Storage Conditions and Period for unused T&R Product Reel Quantity (pcs/reel) 0.0200.012 0.008 0.008 0.276 0.079 Suffix = None mm Suffix = S Suffix = E Radiated Efficiency* Peak Gain (dBi) Average Gain (dBi) Top View Side View   a T L W Top Bottom 2.45 GHz SMD Chip Antenna, AEC-Q200 QualifiedP/N 2450AT43A100E-AEC Detail Specification: Page 2 of 8 * This 50ohm trace to the antenna can be shorten (considerably) to suit your PCB space constraints https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 2022 Johanson Technology, Inc. All Rights Reserved Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. High Frequency Ceramic Solutions 8/10/2022 Layout Recommendation #1: Vertical Mounting No Ground 20 19* 40 9.5 50Ω Feed Line GND Plane 0Ω *Line width should be designed to match 50ohm characteristic impedance, depending on your PCB material and thickness (distance to GND) Units: mm Orderable EVB p/n: 2450AT43A100-EB1SMA Go to https://www.johansontechnology.com/request-a-sample Note: Matching circuits and component values will be different on the client's design, depending on PCB layout, geometry, etc. It is recommended that the designer leave available slots for a "pi" (or shunt-series- shunt) network. The antenna matching network values you see here are used when antenna is mounted on Johanson's evaluation board. * GND Plane GND Plane 2.0 5.5 8.0 1.0 0Ω Matching circuits 2.45 GHz SMD Chip Antenna, AEC-Q200 QualifiedP/N 2450AT43A100E-AEC Detail Specification: Page 3 of 8 https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 2022 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 8/10/2022 Typical Electrical Performance (T=25°C) on Layout Recommendation #1 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. Return Loss 2.45 GHz SMD Chip Antenna, AEC-Q200 QualifiedP/N 2450AT43A100E-AEC Detail Specification: Page 4 of 8 https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 2022 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 8/10/2022 Typical Radiation Patterns (T=25°C) of Layout Recommendation #1 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. ) XY-V/XY-H 180° 270° 0° 90° X Z Y XY-cut scanning direction XY cut @2.45GHz Vertical Horizontal XZ-V/XZ-H YZ-V/YZ-H 180° 270° 0° 90° X Z Y XZ-cut scanning direction 180° 270° 0° 90° X Z Y YZ-cut scanning direction XZ cut @2.45GHz Vertical Horizontal YZ cut @2.45GHz Vertical Horizontal 2.45 GHz SMD Chip Antenna, AEC-Q200 QualifiedP/N 2450AT43A100E-AEC Detail Specification: Page 5 of 8 * This 50ohm trace to the antenna can be shorten (considerably) to suit your PCB space constraints https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 2022 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 8/10/2022 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. Layout Recommendation #2: Horizontal Mounting *Line width should be designed to match 50ohm characteristic impedance, depending on your PCB material and thickness (distance to GND) Units: mm Orderable EVB p/n: 2450AT43A100-EB2SMA Go to https://www.johansontechnology.com/request-a-sample Note: Matching circuits and component values will be different on the client's design, depending on PCB layout, geometry, etc. It is recommended that the designer leave available slots for a "pi" (or shunt-series- shunt) network. The antenna matching network values you see here are used when antenna is mounted on Johanson's evaluation board. 9.5 40 5 9 2.5 GND Plane 20 50Ω Feed Line* No Ground Matching circuits 8.0 1.0 2.0 0 Ohm GND * GND 6.8nH Matching circuits 5.5 2.45 GHz SMD Chip Antenna, AEC-Q200 QualifiedP/N 2450AT43A100E-AEC Detail Specification: Page 6 of 8 https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.0 2022 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 8/10/2…

Text truncated - open the document above for the full version.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2606001890E2 Page: 1 of 74 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT EUT Description: DK-B1 Applicant: Alif Semiconductor, Inc 7901 Stoneridge Dr STE300, Pleasanton, CA 94588 Manufacturer: Alif Semiconductor, Inc 7901 Stoneridge Dr STE300, Pleasanton, CA 94588 Brand Name: Balletto Devkit Model No./ISED HVIN: DK-B1 ISED PMN: Balletto Devkit Report Number: TERF2606001890E2 FCC ID 2A58G-DKB1 IC: 35789-DKB1 Date of EUT Received: June 3, 2026 Date of Test: June 4, 2026 ~ June 17, 2026 Issue Date: June 24, 2026 Approved By Vito Pei We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. Central RF Lab The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 and the energy emitted by the sample EUT comply with FCC rule part §15.247, ISED RSS-247. The results of this report relate only to the sample identified in this report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2606001890E2 Page: 2 of 74 Revision History Report Number Revision Description Issue Date Revised By Remark TERF2606001890E2 00 Original June 24, 2026 Sandy Yu Note: 1、 The remark "*" indicates modification of the report upon requests from certification body. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TERF2606001890E2 Page: 3 of 74 Table of Contents 1 GENERAL INFORMATION ............................................................................................... 4 1.1 Equipment Under Test …

Text truncated - open the document above for the full version.