2A59P-HNCICar Wireless Charger

User Manual Wireless Tx&magnetic Product Warranty Card Warranty Period꞉ 12 months Thanks for using our product, we provide 12 months of free charge after‑sales service under normal usage. In order to protect your rights, please be sure to fill in the following content truthfully and affix the dealer's seal when purchasing. If the product is damaged by man‑made or force majeure, or the product has expired, and the warranty card is not presented, the company reserves the right to charge appropriate service fees at its discretion. Product Brand꞉ Specification & Function Description ꞉ Qi2.2 Magnetic Car Wireless Charger Product Name꞉ Product Model꞉ Purchase Date꞉ Month Year Day If there is no purchase date filled in, the factory date shall prevail! Dealer Signature꞉ Reasons for Defective꞉ Customer Name꞉ Address꞉ Contact Number꞉ Input꞉ 5V 2A Wireless Out꞉5W Input꞉ 12V 3A/15V 2A Wireless Out꞉25W/15W/7.5W Dimension꞉30(H)x68(Φ)mm Weight꞉50g Input Cable Screw­Threaded Lock Clip Switch Air Vent Clip Base installation method꞉ The base can be installed on glass and the center console Forward Installation 1.Pull up the switch 2.Put the charger on the place you need to stand and get out the air 3.Press down the switch Plug the car charger into cigar lighter hole. Attention! Make sure to use the fast charger adapterUSB-C PD 12V/3A，15V/2A Reverse Installation 1.Pull up the switch 2.Put the charger on the place you need to stand and get out the air 3.Press down the switch FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Statement To maintain compliance with FCC'S RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm between the radiator and your body. This device and its antenna(s) must not be co- located or operation in conjunction with any other antenna or transmitter.

Rev 1/26/2023 Shenzhen Huani electronics Co.,Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 04-14-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A59P-HNCI [Shenzhen Huani electronics Co.,Ltd] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen Huani electronics Co.,Ltd] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Eason Li Rev 1/26/2023 Shenzhen Huani electronics Co.,Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 04-14-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A59P-HNCI [Shenzhen Huani electronics Co.,Ltd] ce8rtifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Eason Li

Shenzhen Huani electronics Co.,Ltd U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: April 14, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2A59P-HNCI Shenzhen Huani electronics Co.,Ltd (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Shenzhen Huani electronics Co.,Ltd FRN: 0032221236 Address: 3rd Floor, Building B, Jinkaijin Industrial Zone, Shilongzai, Shiyan, Bao'an, Shenzhen, China Signature: Contact Person: Eason Li Tel: 13538218145 Email: [email protected]

Shenzhen Huani electronics Co.,Ltd Date: April 14, 2026 Product Model Number: HNCi2.2 FCC ID: 2A59P-HNCI To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Eason Li Contact Listed on FCC Wesbite Title: Sales Manager Tel.: 13538218145 Email: [email protected] On behalf of: Shenzhen Huani electronics Co.,Ltd

Shenzhen Huani electronics Co.,Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 15, 2026 Subject; Request for Confidentiality FCC ID: 2A59P-HNCI To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Eason Li Title: Sales Manager

Report No: SSP26030529-1E FCC ID: 2A59P-HNCI Annex of Test Report Annex A. EUT External Photos Model: HNCi2.2 EUT View 1 EUT View 2 Report No: SSP26030529-1E FCC ID: 2A59P-HNCI Annex of Test Report EUT View 3 EUT View 4 Report No: SSP26030529-1E FCC ID: 2A59P-HNCI Annex of Test Report EUT View 5 EUT View 6 Report No: SSP26030529-1E FCC ID: 2A59P-HNCI Annex of Test Report EUT View 7 EUT View 8

Report No: SSP26030529-1E FCC ID: 2A59P-HNCI Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample Label Size : 30mm*15mm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

Report No: SSP26030529-1E FCC ID: 2A59P-HNCI Annex of Test Report Annex B. EUT Internal Photos EUT Internal View 1 EUT Internal View 2 Coil Antenna Report No: SSP26030529-1E FCC ID: 2A59P-HNCI Annex of Test Report EUT Internal View 3

Report No: SSP26030529-1E FCC Test Report Page 1 of 10 RF Exposure Report FCC ID: 2A59P-HNCI Report No. : SSP26030529-1E Applicant : Shenzhen Huani electronics Co.,Ltd Product Name : Car Wireless Charger Model Name : HNCi2.2 Test Standard : FCC CFR 47 PART 1, 1.1310 Date of Issue : 2026-04-13 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26030529-1E FCC Test Report Page 2 of 10 Test Report Basic Information Applicant..................................: Shenzhen Huani electronics Co.,Ltd Address of Applicant...............: 3rd Floor, Building B, Jinkaijin Industrial Zone, Shilongzai, Shiyan, Bao'an, Shenzhen, China Manufacturer..........................: Shenzhen Huani electronics Co.,Ltd Address of Manufacturer........: 3rd Floor, Building B, Jinkaijin Industrial Zone, Shilongzai, Shiyan, Bao'an, Shenzhen, China Product Name.........................: Car Wireless Charger Brand Name.............................: - Main Model..............................: HNCi2.2 Series Models..........................: - Test Standard..........................: FCC CFR 47 PART 1, 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Test .............................: 2026-03-27 to 2026-04-11 Test Result...............................: PASS Tested By ................................: (Tate Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26030529-1E FCC Test Report Page 3 of 10 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Test Facilities ........................................................................................................................................................6 1.4 List of Measurement Instruments ..........................................................................................................................7 1.5 Measurement Uncertainty .....................................................................................................................................7 2. RF Exposure .................................................................................................................................................................8 2.1 Standard and Limit................................................................................................................................................8 2.2 Test Procedures ....................................................................................................................................................8 2.3 Test Data and Results ............................................................................................................................................9 Annex A. Test Photos ..................................................................................................................................................... 10 Report No: SSP26030529-1E FCC Test Report Page 4 of 10 Revision History Revision Issue Date Description Revised By V1.0 2026-04-13 Initial Release Lahm Peng Report No: SSP26030529-1E FCC Test Report Page 5 of 10 1. General Inf ormation 1.1 Product Information Product Name: Car Wireless Charger Trade Name: - Test Model: HNCi2.2 Series Models: - Rated Voltage: USB-C Input: 12V3A / 15V2A Wireless Output:25W/15W/7.5W Battery: - Test Sample No: SSP26030529-1 Hardware Version: V1.0 Software Version: V1.0 Note 1: The test data is gathered from a production sample, provided by the manufacturer. Wireless Specification Wireless Standard: WPC (QI) Operating Frequency: 110.5~205kHz Max. Field Strength: 69.97dBuV/m Modulation: FSK Antenna Gain: 0dBi Type of Antenna: Coil Antenna Type of Device: Portable Device Mobile Device Report No: SSP26030529-1E FCC Test Report Page 6 of 10 1.2 Test Setup Information List of Test Modes Test Mode Description Remark TM1 Wireless Charging 25W(Mobile Phone) TM2 Wireless Charging 15W (Mobile Phone) TM3 Wireless Charging 7.5W (Mobile Phone) Note: All modes have been tested and only the worst mode TM3 data is represented in the report. List and Details of Auxiliary Cable Description Length (cm) Shielded/Unshielded With/Without Ferrite - - - - List and Details of Auxiliary Equipment Description Manufacturer Model Serial Number Adapter CUKTECH Technology Co., Ltd AD1003 - Mobile phone iPhone MG843CH/A C6KDL69N0GQY 1.3 Test Facilities Laboratory Name: Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China CNAS Laboratory No.: L18863 A2LA Certificate No.: 6983.01 FCC Registration No: 583813 FCC Designation No.: CN1373 ISED Registration No.: CN0164 Report No: SSP26030529-1E FCC Test Report Page 7 of 10 1.4 List of Measurement Instruments Description Manufacturer Model Serial Number Cal. Date Due. Date Electromagnet-ic radiation tester WAVECONTROL SMP3 23SL0158 2025-07-16 2026-07-15 Elec…

Text truncated - open the document above for the full version.

深圳市瑞通千业科技有限公司 Shenzhen Ruitong Qianye Technology Co., Ltd. 客户/Ciient 名称/TYPE Coil ANT Manufacturer Shenzhen Huani electronics Co.,Ltd Address of Manufacturer 3rd Floor, Building B, Jinkaijin Industrial Zone, Shilongzai, Shiyan, Bao'an, Shenzhen, China Enginrer NO 日期/Date 2025-10-23 本公司工程部/For Enginer Departner Only 修改内容/Rrvised Cintent 认可日期/APProved Date 编制/Prepared 审核/Checked 认可/Approved 客户认可回签/Authorixed Signaturure Company Chop 工程/ Enginrer 认可/QC APProved 认可日期/APProved 深圳市瑞通千业科技有限公司 Shenzhen Ruitong Qianye Technology Co., Ltd. 一、 线圈工艺/Winding Procese: NO 绕组 guage number of windings direction of winding 1 coil winding 2UEW-B-0.08*70P 11TS CCW 2 二．电气性能/FEATURES: 1.测试条件（Test conditions）：25°C,65%RH@100KHz/1V 1.1 电感量（Inductance） 1.12 L0A(线圈+磁片)=8.0uH±5% 1.2 Q值=50MIN 1.3 直流电阻（DCR）：80mΩ MAX 1.4 工作温度(Operating Temperature)：-25°C~85°C 2.测试仪器(Test instrument)：同惠TH2830 N O Project materials 1 WIRE ￠0.08*56p 2UEW- 2 FERRITE 43.5*0.8 Straight-slot ferrite hard magnetic material 3 GLUE Water-based white glue 4 SOLDER HQ-996/JS-996 5 Tin Kanjiro Pure Tin 6 High temperature adhesive 5MMhigh-temperature tape 7 20*0.8 Small magnetic separator plate 深圳市瑞通千业科技有限公司 Shenzhen Ruitong Qianye Technology Co., Ltd. 3. bill of materials 三．电路图/CIRCUIT DIAGRAM 单位： MM 四．外形图/OUTSIDE DIAGRA 标准 A B C D E F G STD 43.5±0.5 39±0.5 20±0.3 0 20±2 3±1 2.0±0.2 单位： MM 8 深圳市瑞通千业科技有限公司 Shenzhen Ruitong Qianye Technology Co., Ltd. 五．包装/PACKAGE 5.3包装以现有包装盘为参照标准，以实际出货包装为准，如有特殊要求可定制。 The packaging shall be based on the exusting packing plate and the actual delivery package shall prevail .If there is any requirement,we can customize it. 深圳市瑞通千业科技有限公司 Shenzhen Ruitong Qianye Technology Co., Ltd. 六、贮存和使用条件 Storage and Use condition 6.1 贮存条件 Storage condition 6.1.1 建议贮存条件：温度-25°C~ 85°C ，湿度70% (Max.) Recommended keeping conditions: -25°C ~85°C, 70%RH (Max.) 6.1.2 贮存期限：自生产之日起六个月内 Storage life : Within the limits of six months from being produced. 6.2 使用条件 Use condition 使用条件限制：温度=-25°C~ 85°C, 湿度≤ 90% Use condition limit: T=-25°C~85°C, RH≤ 90%.

Report No: SSP26030529-1E FCC Test Report Page 1 of 29 FCC TEST REPORT FCC ID: 2A59P-HNCI Report No. : SSP26030529-1E Applicant : Shenzhen Huani electronics Co.,Ltd Product Name : Car Wireless Charger Model Name : HNCi2.2 Test Standard : FCC Part 15 Subpart C Date of Issue : 2026-04-13 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26030529-1E FCC Test Report Page 2 of 29 Test Report Basic Information Applicant..................................: Shenzhen Huani electronics Co.,Ltd Address of Applicant...............: 3rd Floor, Building B, Jinkaijin Industrial Zone, Shilongzai, Shiyan, Bao'an, Shenzhen, China Manufacturer..........................: Shenzhen Huani electronics Co.,Ltd Address of Manufacturer........: 3rd Floor, Building B, Jinkaijin Industrial Zone, Shilongzai, Shiyan, Bao'an, Shenzhen, China Product Name.........................: Car Wireless Charger Brand Name.............................: - Main Model..............................: HNCi2.2 Series Models..........................: - Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-03-27 to 2026-04-11 Test Result...............................: PASS Tested By ................................: (Tate Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26030529-1E FCC Test Report Page 3 of 29 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................8 2. Summary of Test Results .............................................................................................................................................9 3. Antenna Requirement ............................................................................................................................................... 10 3.1 Standard and Limit.............................................................................................................................................. 10 3.2 Test Result .......................................................................................................................................................... 10 4. Conducted Emissions ................................................................................................................................................ 11 4.1 Standard and Limit.............................................................................................................................................. 11 4.2 Test Procedure.................................................................................................................................................... 11 4.3 Test Data and Results .......................................................................................................................................... 12 5. Radiated Emissions ................................................................................................................................................... 17 5.1 Standard and Limit.............................................................................................................................................. 17 5.2 Test Procedure.................................................................................................................................................... 17 5.3 Test Data and Results .......................................................................................................................................... 19 6. Occupied Bandwidth ................................................................................................................................................. 28 6.1 Standard and Limit.............................................................................................................................................. 28 6.2 Test Procedure.................................................................................................................................................... 28 6.3 Test Data and Results .......................................................................................................................................... 28 Report No: SSP26030529-1E FCC Test …

Text truncated - open the document above for the full version.

Report No: SSP26030529-1E FCC ID: 2A59P-HNCI Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View 2 Report No: SSP26030529-1E FCC ID: 2A59P-HNCI Annex of Test Report Radiated Emission Test View 3