2A5AK-AC-01AI Camera

Bind Device 01 Device ConnectionDevice networkingFunction IntroductionEquipment SpecificationsProduct Precautions warning 0203 QMox Volume buttons Power button on/off Speaker hole Ai button microphone touchscreen Photo button Back button Device binding requires downloading the APP. Follow the steps below to bind the device: Device WIFI connection method： Download the APP: Scan the QR code below to search “QMox” in the application market to download the APP. 01 Log in to the APP: Register and log in to the account. 02 Turn on the device: Press and hold the power-on button for 3 seconds to turn on the device, and then enter the binding QR code interface. 03 Scan the device QR code: The device will display a "Bind Device" QR code. Use the "QMox" APP to scan and connect to the device. 04 User Guide Fill light Camera TF card TF Reset button Charging port QMox Let AI Connect with Life Sign in Create account 0405 Please read the following precautions carefully when using the device. Before using this product, please read and follow the precautions below to ensure optimal device performance, avoid unnecessary losses, and prevent problems before they occur: Environmental Information Security Information Equipment size/function The device is not sold with a power adapter. Please use a CCC-certified USB power adapter for charging. The adapter specifications are as follows: Input: AC 100-240V 50/60Hz 0.2A; Output: DC 5V 2A. Unauthorized modifications to this equipment (such as replacing the lens/battery/ motherboard/disassembling the camera body, etc.) are strictly prohibited. The device requires a 5V/2A charger. The charging port indicator light will illuminate green during charging and will turn off when charging is complete. Please fully charge the device upon receipt before use. When using the device, please enable the app's auto-start and message notifications on your phone to avoid missing notifications in case of abnormal situations. This device only supports the 2.4 GHz band when connecting to Wi-Fi; it does not upport the 5 GHz band. 1. This product contains small parts. Do not allow children under three years old to use it alone; adult supervision is required. 2. Please regularly check the casing or other parts for damage. If any damage is found, stop using the product until it is repaired. 3. Given that this product may require children to maintain a high level of concentration and attention during use, please use this product in a safe and appropriate place, and avoid using this product in places or scenarios where there may be safety hazards (such as parking lots, riding escalators, crossing the road). 4. The image recognition and content generation services of this product are based on artificial intelligence models and may contain errors or omissions. The accuracy, completeness, and functionality of the service content cannot be guaranteed, and the service content does not represent the views or positions of our company. Users are advised to use the service content for reference only and not as a direct basis or guidance for subsequent actions (such as food, use, hazard assessment, operating procedures, etc.). We are not liable for any losses caused thereby.nly supports the 2.4 GHz band when connecting to Wi-Fi; it does not upport the 5 GHz band. 1. Click the "Wireless Network" option, then select the desired Wi-Fi network and enter your username and password to connect. Wi-Fi Dangqian Dwaef Current Network Other Network The device can only connect to the 2.4GHz band and does not support the 5GHz band. 1. After clicking the " " button to enter the camera interface, click the "Shoot" button. After taking the picture, click the "AI" button to explore. AI Explores Everything 01 1. This device is equipped with intelligent AI dialogue functionality. Users can trigger the device's AI chat function through the "AI Chat " on the homepage or by long-pressing the AI button on any interface. 1. Click the "Workshop Menu" on the homepage and select the style you want to create. AI Dialogue 02 Raw image creation 03 12 2. Once you enter the AI learning dialogue interface, the device will automatically generate standard Chinese and English. Click the AI button to enter the "Chat with it" option, and then click the answer option to have a conversation with the AI. 12 butterfly Question 1 Question 2 What's thisLet's talk about itMagic CreationWhat's thisLet's talk about itMagic Creation 7cm 13cm Component Name Printed Circuit Board Housing components Battery Accessories Harmful substances or elements (Pb)(Hg)(Cd)(Cr(VI))(PBB)(PBDE) Please use this product in an environment between 0 and 35°C. Excessively high or low ambient temperatures may affect product functionality or even cause malfunctions. Battery performance will be limited below 5°C. Do not place the device in environments with high temperatures, low temperatures, high humidity, or strong electromagnetic fields. This product is equipped with a non-removable built-in battery; do not disassemble or modify the battery, and do not drop, pull, or bend this product to avoid small parts falling off and causing suffocation or other dangers. Please store and use the equipment and accessories properly, and avoid moisture, deformation, baking or damage to prevent affecting normal use. If this product or its accessories are subjected to impact, drop, bending, liquid ingress, or foreign object entry, or if the product or its accessories are damaged, swollen, abnormally hot, smoked, burned, or have an unusual odor, please turn off the power and stop using the product. Aircraft Safety: Please turn off this device before boarding, as it interferes with aircraft operation and the entire cellular network. Using this device on an aircraft is illegal, and violating these safety regulations may result in prosecution or a denial-of-service (DoS) network issue. Environmental safety: Remember to comply with all applicable rules and regulations in all places. Always t…

Text truncated - open the document above for the full version.

Rev 1/26/2023 Shenzhen Xiaowei Intelligent Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-06-15 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID:2A5AK-AC-01 Shenzhen Xiaowei Intelligent Technology Co., Ltd certifies that the equipment for which authorization is sought is not“covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Shenzhen Xiaowei Intelligent Technology Co., Ltd certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Weijia Fang) Rev 1/26/2023 Shenzhen Xiaowei Intelligent Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-06-15 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID:2A5AK-AC-01 Shenzhen Xiaowei Intelligent Technology Co., Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Weijia Fang)

Shenzhen Xiaowei Intelligent Technology Co., Ltd

Shenzhen Xiaowei Intelligent Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 15, 2026 Subject; Request for Confidentiality FCC ID:2A5AK-AC-01 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description FCC Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Weijia Fang Title: Manager

Shenzhen Xiaowei Intelligent Technology Co., Ltd Product Similarity Declaration Product name: AI Camera Model name: AC-01,AC-02,AC-05,AC-06,AC-09 FCC ID:2A5AK-AC-01 We ( Shenzhen Xiaowei Intelligent Technology Co., Ltd) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name and color . Sincerely yours, Applicant Signature Printed Name: Weijia Fang Title: Manager Address: 203, building a, Yintian wenle Industrial Zone, Gongle community, Xixiang street, Shenzhen, China Email: [email protected]

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Shenzhen Xiaowei Intelligent Technology Co., Ltd Date：2026-06-15 Product Model Number: Temperature and Humidity Probe FCC ID:2A5AK-AC-01 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out byQAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Weijia Fang Contact Listed on FCC Wesbite Title: Manager Email: [email protected] On behalf of: Shenzhen Xiaowei Intelligent Technology Co., Ltd

Page 1 of 4 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China FCC ID: 2A5AK-AC-01 External Photos Page 2 of 4 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Label&location Page 3 of 4 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Page 4 of 4 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China

FCC ID LABELING AND LOCATION FCC ID Label AI Camera Model NO.: AC-01 Input Rating: DC 5V/2A,9V/2A FCC ID: 2A5AK-AC-01 Shenzhen Xiaowei Intelligent Technology Co., Ltd Made in China SIZE:3*5cm FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Page 1 of 4 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China FCC ID:2A5AK-AC-01 Internal Photos Page 2 of 4 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Page 3 of 4 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China Page 4 of 4 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China 2.4G WIFI ANT

FCC ID :2A5AK-AC-01 RF EXPOSURE EVALUATION METHOD FCC ID: 2A5AK-AC-01 According to KDB 447498 D01 General RF Exposure Guidance v06 SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Maximum measured transmitter power. 802.11b Test Channel Frequency (MHz) Maximum Peak Conducted Output Power(dBm) Limit (dBm) CH01 2412 8.54 30 CH06 2437 8.46 30 CH11 2462 8.42 30 802.11g Test Channel Frequency (MHz) Maximum Peak Conducted Output Power(dBm) Limit (dBm) CH01 2412 8.15 30 CH06 2437 8.43 30 CH11 2462 8.32 30 802.11n20 Test Channel Frequency (MHz) Maximum Peak Conducted Output Power(dBm) Limit (dBm) CH01 2412 8.72 30 CH06 2437 8.44 30 CH11 2462 8.68 30 802.11n40 Test Channel Frequency (MHz) Maximum Peak Conducted Output Power(dBm) Limit (dBm) CH03 2422 7.86 30 CH06 2437 7.52 30 CH09 2452 7.64 30 FCC ID :2A5AK-AC-01 Remark: The best case gain of the antenna is 1.34dBi. 1.34 dBi logarithmic terms convert to numeric result is nearly 1.36 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)] Test Channel Range tune up max power (dBm) [(max. power of channel, including tune-up tolerance, mW) (min. test separation distance,mm)] [f(GHz)] Result Limit 802.11b CH01 7~9 9 1.259 5 2.412 2.47 3 CH06 7~9 9 1.259 5 2.437 2.48 3 CH11 7~9 9 1.000 5 2.462 2.95 3 802.11g CH01 7~9 9 1.259 5 2.412 2.47 3 CH06 7~9 9 1.259 5 2.437 2.48 3 CH11 7~9 9 1.000 5 2.462 2.95 3 802.11n20 CH01 7~9 9 1.259 5 2.412 2.47 3 CH06 7~9 9 1.259 5 2.437 2.48 3 CH11 7~9 9 1.000 5 2.462 2.95 3 802.11n40 CH03 6~-8 8 1.259 5 2.422 1.96 3 CH06 6~-8 8 1.259 5 2.437 1.97 3 CH09 6~-8 8 1.000 5 2.452 2.34 3 The test Result is less than 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. Conclusion: No SAR is required.

www.szjhwx.com 深圳市锦鸿无线科技有限公司 客户:规格型号：JHXW2604-119-B Vendor：Description： 产品描述 PartDescription 产品名称：WIFI天线所承认项目:AC01 ProductName：Project： 物料代码：版本：A1 PartNO：Version： ■规格书工程图面样品ROHS报告 SpecDrawingSampleROHSRepot CPK报告关键尺寸报告■可靠性测试报告□安规报告 CpkReportFAIReportReliabilityReportSafetyReport 附件 Attachments 制造流程图成型条件■材质证明书 QCFlowChartMoldingconditionsMaterialVerificationSheet ■包装方式C3C证书物料检验标准 PackingContent3CCertificateMaterialinspectionstandard 供应商签核 Vendor 拟制：彭彪审核：郑翠兰批准：彭发辉 Design:Check:Approval: 技术确认 Technologycheck 结构意见/签名：硬件意见/签名： MechanicalHardware 工业/包材设计意见/签名：项目意见/签名： IDMarket 品质意见/签名： DQE/SQE 最终确认 Finalcheck 质量策划：ROHS:□Rohs物料 Qualityplanning□非Rohs物料  承认□拒绝承认 ApprovedReject 承认条件 Approvalcondition □条件承认 需满足条件: Conditionapproved □临时承认限量PCS采购 Temporaryapproved 审批 Approvalby 研发总工（技术总监）： RDLeader(TechnologyDirector) 质量总监： QualityDirector 分发部门 Distribute □IQC□采购（供应商）□样品管理/文控□外协厂□其它 Shenzhen Xiaowei Intelligent Technology Co., Ltd Room 301, Building B1, Weiye Innovation 18th Industrial Park, Baoyuan Road, Nanchang Community, Xixiang Street, Bao'an District, Shenzhen Address: Shenzhen Jinhong Wireless Technology Co., Ltd. www.szjhwx.com 目录Content 1说明书Instructions ........................................................................ 2 产品技术指标Productspecifications ..................................... 3电气性能测试Electricalperformancetest .......................... 3.1测试设备Testequipmentandenvironment.......................... 3.2天线有源数据Antennaactivetestdata........................... 4工程图纸Engineeringdrawings .................................................. 5安装说明Installationinstructions ....................................... 6包装方式Packingmethod ............................................................... www.szjhwx.com 1说明instructions 这份报告包含天线电性能测试的若干设备、测试环境和测试结果，以及天线的结构图纸和 检验报告. Thisreportincludesseveralequipment,testenvironmentandtestresultsforthe electricalperformanceoftheantenna,aswellasstructuraldrawingsandinspection reportsoftheantenna. 2产品技术指标Productspecifications 电性能指标 ElectricalSpecifications 频率范围 FrequencyRange(MHz) 2400~2500 电压驻波比VSWR ≤3 输入阻抗 InputImpedance(Ω) 50 极化方式Polarization水平 最大功率 Maximuminputpower(W) 2 接头型号 Inputconnectortype 无 机械指标 MechanicalS pecifications 天线尺寸 Dimensions(mm) 21.1*25.5 天线重量Antennaweight(g) 1g 天线颜色Antennacolor黑色 Horizontal without black 3电气性能测试Electricalperformancetest 3.1测试设备Testequipmentandenvironment 3.2天线有源数据Antennaactivetestdata 4工程图纸Engineeringdrawings Unit:mm 6 5安装说明Installationinstructions Frequency /MHz频率 MaxGain/dBi 最大增益 Efficiency/% 天线效率 24001.2737.75 24501.3438.52 25001.3838.73 51801.4339.85 55001.5741.26 58251.6543.67

TEST REPORT FCC ID:2A5AK-AC-01 Product : AI Camera Model Name : AC-01 Brand : N/A Report No. : SZNTT26022790E1-1 Prepared for Shenzhen Xiaowei Intelligent Technology Co., Ltd 203, building a, Yintian wenle Industrial Zone, Gongle community, Xixiang street, Shenzhen, China Prepared by Shenzhen NTT Testing Technology Co., Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park No.4, Industrial Avenue, Tangwei Community, Fuhai Sub- district,Bao 'an District, Shenzhen City, China TEL: 0755-27889935          !"        #  $  %  ! & '( )*    ( +,* ( -   %*, .  ( /  !"",&( $0  .( #( '    #  $  %  ! & '( )*    ( +,* ( -   %*, .  ( /  !"",&( $0  .( #( '                  1' (1' (1' 2(1'                ! "      # $% !!& &!!% '() * (  !   +  , ! (   - !. !!$  - !/. !!$ (   - !/. !!$ " 0 ,  1 1, 0 1   1- #"".  0    02 0 0 3    456"7    2 0 0  3       1 -  0       0  "0  0  1    8   . 2 0 0 2    ,  #"". 0   - 1   , 1- #"".   -.  0 1   0 ,  0     1-4"  59 7  - :  , 2 4 , 7 '  ;  , 49 7 1  < S ZNTT-TR830-0 Page 2 of 59 Report No.:SZNTT26022790E1-1 SZNTT-TR830-0 Page 3 of 59 Hotline: 0755-27889935 http://www.ntt-testing.com Contents Page 1 TEST RESULT CERTIFICATION ........................................................................................................................ 2 2 TEST SUMMARY ................................................................................................................................................... 5 3 GENERAL INFORMATION .................................................................................................................................. 6 3.1 GENERAL DESCRIPTION OF E.U.T............................................................................ 6 3.2 CHANNEL LIST ........................................................................................................... 7 3.3 TEST SITE .................................................................................................................. 8 3.4 TEST SETUP CONFIGURATION .................................................................................. 9 3.5 TEST MODE ............................................................................................................... 9 4 EQUIPMENT DURING TEST ............................................................................................................................. 10 4.1 EQUIPMENTS LIST ................................................................................................... 10 4.2 MEASUREMENT UNCERTAINTY................................................................................ 12 4.3 DESCRIPTION OF SUPPORT UNITS .......................................................................... 12 5 CONDUCTED EMISSION ................................................................................................................................... 13 5.1 E.U.T. OPERATION ................................................................................................. 13 5.2 EUT SETUP ............................................................................................................. 13 5.3 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ........................................ 14 5.4 MEASUREMENT PROCEDURE .................................................................................. 14 5.5 CONDUCTED EMISSION LIMIT .................................................................................. 14 5.6 MEASUREMENT DESCRIPTION ................................................................................ 15 5.7 CONDUCTED EMISSION TEST RESULT .................................................................... 15 6 RADIATED SPURIOUS EMISSIONS ............................................................................................................... 19 6.1 EUT OPERATION ..................................................................................................... 19 6.2 TEST SETUP ............................................................................................................ 20 6.3 SPECTRUM ANALYZER SETUP ................................................................................ 21 6.4 TEST PROCEDURE ................................................................................................... 22 6.5 SUMMARY OF TEST RESULTS ................................................................................. 23 7 DUTY CYCLE ....................................................................................................................................................... 32 7.1 LIMIT ........................................................................................................................ 32 7.2 TEST SETUP ............................................................................................................ 32 Report No.:SZNTT26022790E1-1 SZNTT-TR830-0 Page 4 of 59 Hotline: 0755-27889935 http://www.ntt-testing.com 7.3 TEST PROCEDURE ................................................................................................... 32 7.4 TEST RESULT .......................................................................................................... 33 8 CONDUCT BAND EDGE AND SPURIOUS EMISSIONS MEASUREMENT ............................................. 35 8.1 TEST SETUP ...................................................................…

Text truncated - open the document above for the full version.

Page 1 of 2 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China FCC ID:2A5AK-AC-01 Test Photo Page 2 of 2 Shenzhen NTT Testing Technology Co.,Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park, No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, Guangdong, China