2A5LK-X5Snetwork camera

FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user ’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Statement To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Shenzhen Ruilang Technology Co., Ltd 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – EquipmentType Company name: Shenzhen Ruilang Technology Co., Ltd Address: 7 207 Mengliyuan Industrial Zone, Oil Song Road, Longhua District, Shenzhen, Guangdong, 518110, China Product Name: network camera FCCID: 2A5LK-X5S Model(s): X5S 2.911(d)(5)(i) EquipmentType We, [Shenzhen Ruilang Technology Co., Ltd] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: zhen liu Date: Oct. 07, 2023 Title: Manager Company name: Shenzhen Ruilang Technology Co., Ltd Signature: NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Ruilang Technology Co., Ltd 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen Ruilang Technology Co., Ltd Address: 7 207 Mengliyuan Industrial Zone, Oil Song Road, Longhua District, Shenzhen, Guangdong, 518110, China Product Name: network camera FCCID: 2A5LK-X5S Model(s): X5S 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Ruilang Technology Co., Ltd] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to §1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: zhen liu Date: Oct. 07, 2023 Title: Manager Company name: Shenzhen Ruilang Technology Co., Ltd Signature: NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Ruilang Technology Co., Ltd 2.911 (d)(7)USA Agentv1.3 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Ruilang Technology Co., Ltd Address: 7 207 Mengliyuan Industrial Zone, Oil Song Road, Longhua District, Shenzhen, Guangdong, 518110, China Product Name: network camera FCCID: 2A5LK-X5S Model(s): X5S 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen Ruilang Technology Co., Ltd] (“the applicant”) designate [Stone Trading Limited] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Stone Trading Limited Address: 6547 N Academy Blvd #2266,Colorado Springs,CO 80918,United States FCC Registration Number (FRN): 0033401936 Contact Name: Dongmei Fang Telephone No: +12134573118 Email: [email protected] Applicant Company name: Shenzhen Ruilang Technology Co., Ltd Address: 7 207 Mengliyuan Industrial Zone, Oil Song Road, Longhua District, Shenzhen, Guangdong, 518110, China FCC Grantee Code: 2A5LK Contact Name: zhen liu Telephone No: +86 18617070117 Email: [email protected] Signature: Title: manager Signature: Title: Manager Shenzhen Ruilang Technology Co., Ltd 2.911 (d)(7)USA Agentv1.3 Date: Sept. 22, 2023 Date: Sept. 22, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference;Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Shenzhen Ruilang Technology Co., Ltd Agent Authorization Company: Shenzhen Ruilang Technology Co., Ltd Address: 7 207 Mengliyuan Industrial Zone, Oil Song Road, Longhua District, Shenzhen, Guangdong, 518110, China Product Name: network camera Model Number(s): X5S Product Description: network camera We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Oct. 07, 2023 Name: zhen liu Title: Manager Company: Shenzhen Ruilang Technology Co., Ltd

Shenzhen Ruilang Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Oct. 07, 2023 Subject; Request for Confidentiality FCC ID: 2A5LK-X5S To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: zhen liu Title: Manager

Annex A External Photos Report Number: HK2309194328-E Page 1 of 4 Report Number: HK2309194328-E Page 2 of 4 Report Number: HK2309194328-E Page 3 of 4 Report Number: HK2309194328-E Page 4 of 4

FCC ID LABEL: Ca. 15mm x 15mm Label Location FCC ID: 2A5LK-X5S

MPE ESTIMATION FCC ID: 2A5LK-X5S 1, Limit for General Population/ Uncontrolled Exposures Frequency Power density (mW/ cm 2 ) Averaging time(minutes) 300MHz----1.5GHz F/1500 30 1.5GHz---100GHz 1.0 30 Note: F= Frequency in MHz 2, Estimation Result Max PK Output power(dBm) Tune Up Power(dBm) Max Tune Up power(mW) Antenna Gain(dBi) Antenna Gain (numerical) MPE (mW/cm²) 2.4GWIFI 14.50 14±1(15) 31.623 4.11 2.58 0.01622 Note: Note: The estimation distance is 20cm Note: PK Output power= conducted power. Conducted power see the test report HK2309194328-E, antenna gain= 4.11dBi When the minimum test separation distance is >20 cm, a distance of 20 cm is applied to determine RF Exposure test exclusion. The test exclusion threshold is 0.01622mW/cm² which is< 1.0mW/cm², RF Exposure testing is not required. -------The End-------

RF COMPONENTS FLT31A2450-8027G_V024 Page1 of 9 July., 2020 Datasheet of LTCC Device Laminated Ceramic Antenna 2450 MHz P/N: FLT31A2450-8027G * Contents in this sheet are subject to change without prior notice. RF COMPONENTS FLT31A2450-8027G_V024 LTCC Antenna 3216 1 、 Features Antenna Frequency for 2450 2 、 Applications For Miniaturized Bluetooth System 3 、 Shapes & Dimensions *. 注意事项 : 焊盘与焊盘间距大小，请依照 RF COMPONENTS 3216 Size Features Antenna Frequency for 2450 MHz For Miniaturized Bluetooth System Shapes & Dimensions (mm) 焊盘与焊盘间距大小，请依照 下 述尺寸来设计 Layout ，否则容易造成频偏现象。 RF COMPONENTS Page2 of 9 (mm) ，否则容易造成频偏现象。 RF COMPONENTS FLT31A2450-8027G_V024 Page3 of 9 4 、 Evaluation Board and Matching Circuits 5 、 Electrical Characteristics Item Specifications Central Frequency 2450 MHz Band Width 100 MHz typ. Peak Gain 4.11 dBi V.S.W.R ≤2.0 Polarization Linear Azimuth Beam width Omni-directional Impedance 50 Ω 6 、 Characteristic curve 5.2nH 0.6pF RF COMPONENTS FLT31A2450-8027G_V024 7 、 Radiation Pattern & Efficiency Frequency (MHz) Avg. Gain (dBi) Peck Gain (dBi) Efficiency (%) RF COMPONENTS Radiation Pattern & Efficiency 2400 2450 -1.89 -1.32 1.77 4.11 71.1 77.9 RF COMPONENTS Page4 of 9 2500 -1.51 2.55 72.1 RF COMPONENTS FLT31A2450-8027G_V024 Page5 of 9 8 、 Post Dependability Tolerance Item Post Dependability Tolerance Central Frequency ± 5 MHz Band Width ± 5 MHz Gain ± 0.1 dBi V.S.W.R (in BW) ± 0.1 9 、 Reflow Soldering Standard Condition 60~120 sec30~40 sec Time(s) 5 sec (Peak 265 ºC) Temp (ºC) 0 ºC 180 ºC 220 ºC 250 ºC±10 ºC RF COMPONENTS FLT31A2450-8027G_V024 Page6 of 9 10 、 Packaging and Dimensions 3216 Plastic Tape RF COMPONENTS FLT31A2450-8027G_V024 Remarks for Package Reserve a length of 150~ leader of the carrier and further 2 Reel (6000 pcs/Reel) Storage Period Oxidizable Material, 12 months in vacuum sealed bag, please repack within 168 hours by re-seal the package treatment after using. Storage Temperature Range : <30 degree C, Humidity : <60%RH RF COMPONENTS 150~200mm for the trailer of the carrier and 250~300 leader of the carrier and further 250mm of cover tape at the leading part of the carrier. Material, 12 months in vacuum sealed bag, please repack within 168 seal the package treatment after using. Storage Temperature Range : <30 degree C, Humidity : <60%RH RF COMPONENTS Page7 of 9 50~300 mm for the mm of cover tape at the leading part of the carrier. Material, 12 months in vacuum sealed bag, please repack within 168 RF COMPONENTS FLT31A2450-8027G_V024 Page8 of 9 10 、 Dependability Test Test item Test condition / Test method Specification Solderability IEC 60068-2-58 GB/T2423.28 *Solder bath temperature：240±5°C *Immersion time：2±0.5 sec Solder：Sn96.5 Ag3.0 Gu0.5 for lead-free. At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) JIS C5101 *Solder bath temperature：260±5°C *Leaching immersion time：10±1 sec Solder : Sn96.5 Ag3.0 Gu0.5 for lead-free. Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat IEC 60068-2-58 GB/T2423.28 *Preheating temperature：120~150°C, 1 minute. *Solder temperature：260±5°C *Immersion time：10±1 sec Solder：Sn 96.5 Ag 3.0 Gu0.5 for lead-free Measurement to be made after keeping at room temperature for 24±2 hrs. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Loss of metallization on the edges of each electrode shall not exceed 25%. Drop Test IEC 60068-2-32 GB/T2423.8 Customer’s specification. *Height：50 cm *Test Surface：Rigid surface of concrete or steel. *Times：6 surfaces for each units； 2 times for each side. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Vibration IEC 60068-2-6 GB/T 2423.10 *Frequency：10Hz~55Hz~10Hz(1min) *Total amplitude：1.5mm *Test times：6hrs. (Two hrs each in three mutually perpendicular directions) No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Adhesive Strength of Termination IEC60068-2-21 GB/T 2423.6 *Pressurizing force： 5N(≦0603)；10N(>0603) *Test time:10±1 sec No remarkable damage or removal of the termination. RF COMPONENTS FLT31A2450-8027G_V024 Page9 of 9 Bending test IEC 60068-2-21 GB/T 2423.29 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 2mm and then pressure shall be maintained for 10±1 sec. Measurement to be made after keeping at room temperature for 24±2 hours. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Temperature cycle IEC60068-2-14 GB/T 2423.22 30 minutes at -40°C±2°C. 10~15 minutes at room temperature. 30minutes at +85°C±2°C. 10~15 minutes at room temperature. Total 100 continuous cycles Measurement to be made after keeping at room temperature for 24±2 hrs. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. High temperature IEC 60068-2-2 GB/T2423.2 *Temperature：85°C±2°C. *Test duration：500+24/-0 hours. Measurement to be made after keeping at room temperature for 24±2 hrs. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics. Humidity (steady conditions) IEC60068-2-3 GB/T 2423.3 *Humidity：85±5%R.H. *Temperature：85±2°C *Time：500+24/-0 hrs. Measurement to be made after keeping at room temperature for 24±2 hrs ※ 200hrs measuring the first data then 300hrs data. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics at the room temperature. Low temperature IEC 60068-2-1 GB/T2423.1 *Temperature：-40°C±2°C *Test duration：500+24/-0 hours Measurement to be made after keeping…

Text truncated - open the document above for the full version.

Report No.: HK2309194328-E Radiated Emission Report No.: HK2309194328-E Conducted Emission