2A5LY-ITP02Portable thermal printer

No paper placed Charging Low battery On/off
button Paper
feed
direction Type-C
charge
port Paper
output
ITP02 Type-C
(mac) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . 5mm 5mm This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. Le matériel est conforme aux limites de dose d'exposition aux rayonnements énoncés pour fac un autre environnement.

Guangzhou Munbyn Information Technology Co.,Ltd. Add: 329 3rd Floor, Tairong Business Center, No.63 Xizeng Road, Liwan District, Guangzhou, China Tel: +86-18898698719 Fax: +86-18898698719 E-mail: [email protected] Date: 2024-06-28 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, Guangzhou Munbyn Information Technology Co.,Ltd., hereby authorize Bay Area Compliance Laboratories Corp. (Xiamen) to act as a laboratory for testing and test report generation for the following project(s): (Product name: Portable thermal printer, Model number: ITP02, ITP03, ITP06, ITP07 FCC ID: 2A5LY-ITP02) The RF chipset used in our product, only BT(GFSK, π/4-DQPSK ) and BLE(1M) were activated, other functions were disabled by software , the end user has no capability to activate them. Sincerely, Signature: Contact Person: Mark Ma Title: Manager

Guangzhou Munbyn Information Technology Co.,Ltd. Add: 329 3rd Floor, Tairong Business Center, No.63 Xizeng Road, Liwan District, Guangzhou, China Tel: +86-18898698719 Fax: +86-18898698719 E-mail: [email protected] CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Attestation Letter Date: 06/28/2024 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID: 2A5LY-ITP02 Guangzhou Munbyn Information Technology Co.,Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Guangzhou Munbyn Information Technology Co.,Ltd. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Contact Person: Mark Ma Title: Manager

CFR 47 §2.911(d)(7) U.S Agent U.S. AGENT LETTER OF ATTESTATION Date: 2024-06-28 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2A5LY-ITP02 Guangzhou Munbyn Information Technology Co.,Ltd. (“the Applicant”) certifies that, as of the date of the filing of the application, Bouge Tech Inc is our designated U.S. agent for service of process for the above referenced FCC ID. Guangzhou Munbyn Information Technology Co.,Ltd. (“the Applicant”)accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Bouge Tech Inc accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Bouge Tech Inc Address: 457 E MCGLINCY LN, CAMPBELL, CALIFORNIA 95008 United States FRN: 0033768409 Tel.: (86) 134-5045 2927 Email: [email protected] Signed by (printed name): William Signature: Applicant: Guangzhou Munbyn Information Technology Co.,Ltd. Add: 329 3rd Floor, Tairong Business Center, No.63 Xizeng Road, Liwan District, Guangzhou, China FRN: 0032075905 Tel: +86-18898698719 Email: [email protected] Signed by (printed name): Mark Ma Signature:

QA-FR-170-B Guangzhou Munbyn Information Technology Co.,Ltd. Add: 329 3rd Floor, Tairong Business Center, No.63 Xizeng Road, Liwan District, Guangzhou, China Tel: +86-18898698719 Fax: +86-18898698719 E-mail: [email protected] FCC Authorization Date: 2024-06-28 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Guangzhou Munbyn Information Technology Co.,Ltd., Hereby authorizes Bay Area Compliance Laboratories Corp. (Xiamen) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. (Xiamen) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Contact Person: Mark Ma Title: Manager

QA-FR-171-A Guangzhou Munbyn Information Technology Co.,Ltd. Add: 329 3rd Floor, Tairong Business Center, No.63 Xizeng Road, Liwan District, Guangzhou, China Tel: +86-18898698719 Fax: +86-18898698719 E-mail: [email protected] FCC Confidential Authorization Date: 2024-06-28 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2A5LY-ITP02 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Guangzhou Munbyn Information Technology Co.,Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Contact Person: Mark Ma Title:Manager

Guangzhou Munbyn Information Technology Co.,Ltd. Add: 329 3rd Floor, Tairong Business Center, No.63 Xizeng Road, Liwan District, Guangzhou, China Tel: +86-18898698719 Fax: +86-18898698719 E-mail: [email protected] DECLARATION OF SIMILARITY Date: 2024-05-09 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: We, Guangzhou Munbyn Information Technology Co.,Ltd., hereby declare that the product: Portable thermal printer, FCC ID: 2A5LY-ITP02. model: ITP03, ITP06, ITP07 are electrically identical with the model: ITP02 which was tested by Bay Area Compliance Laboratories Corp. (Xiamen) with the same electromagnetic emissions and electromagnetic compatibility characteristics. A description of the differences between those models and that are declared similar are as follows: They are the same product, just different model name and sale channels, the rest are the same. Please contact me should there be need for any additional clarification or information. Best Regards, Signature: Printed name: Mark Ma Title: Manager

Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-EXP Page 1 / 4 EUT EXTERNAL PHOTOS Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-EXP Page 2 / 4 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-EXP Page 3 / 4 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-EXP Page 4 / 4 Port

Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-INP Page 1 / 9 EUT INTERNAL PHOTOS Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-INP Page 2 / 9 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-INP Page 3 / 9 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-INP Page 4 / 9 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-INP Page 5 / 9 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-INP Page 6 / 9 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-INP Page 7 / 9 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-INP Page 8 / 9 Antenna Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-INP Page 9 / 9

RF EXPOSURE REPORT For Guangzhou Munbyn Information Technology Co.,Ltd. 329 3rd Floor, Tairong Business Center, No. 63 Xizeng Road, Liwan District, Guangzhou, China. FCC ID: 2A5LY-ITP02 Report Type: Original Report Product Name: Portable thermal printer Report Number: 2407T42038E-RF-03 Report Date: 2024-06-19 Reviewed By: Stein Peng Approved By: Miles Chen Prepared By: Bay Area Compliance Laboratories Corp. (Xiamen) Unit 102, No. 902 Meifeng South Road, Binhai West Avenue, Science and Technology Innovation Park, Torch High tech Zone XiaMen Tel: +86-592-3200111 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-03 Page 2 of 7 TABLE OF CONTENTS REPORT REVISION HISTORY................................................................................................................................. 3 GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 RF EXPOSURE EVALUATION ................................................................................................................................. 5 APPENDIX A - EUT PHOTOGRAPHS ..................................................................................................................... 6 Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-03 Page 3 of 7 REPORT REVISION HISTORY Number of Revisions Report No. Version Issue Date Description 0 2407T42038E-RF-03 R1V1 2024-06-19 Initial Release Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-03 Page 4 of 7 GENERAL INFORMATION Product Description for Equipment under Test (EUT) Product Name: Portable thermal printer Tested Model: ITP02 Multiple Model(s): ITP03, ITP06, ITP07 Power Supply: DC 5V from USB port or 7.4V from battery Maximum Output Power: GFSK:-2.11 dBm π/4-DQPSK:-2.01dBm BLE:-2.22dBm Operating Band/Frequency: 2402-2480 MHz Modulation Type: BT: GFSK, π/4-DQPSK BLE:GFSK Antenna Type: Built-in ceramic antenna ★Maximum Antenna Gain: 1.36 dBi EUT Received Status: Good Note: 1. The Maximum Antenna Gain was declared by manufacturer. 2. The model difference are model name and sale channels, the rest are the same. 3. All measurement and test data in this report was gathered from production sample serial number: 2KXQ-1 (Assigned by the BACL(Xiamen). The EUT supplied by the applicant was received on 2024-05-07) Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Xiamen) to collect test data is located on the Unit 102, No. 902 Meifeng South Road, Binhai West Avenue, Science and Technology Innovation Park, Torch High tech Zone XiaMen. Bay Area Compliance Laboratories Corp. (Xiamen) Lab is accredited to ISO/IEC 17025 by A2LA (Certificate Number: 7134.01) and the lab has been recognized as the FCC accredited lab under the KDB 974614 D01, the FCC Designation No. : CN1384. Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-03 Page 5 of 7 RF EXPOSURE EVALUATION Applicable Standard According to§15.247(i) and §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission's guideline According to KDB447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances < 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] - [√f(GHz)] < 3.0 for 1-g SAR and < 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is <5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. Measurement Result The max conducted power including tune-up tolerance is -2 dBm (0.63 mW). [(max. power of channel, mW)/(min. test separation distance, mm)][√f(GHz)] =0.63/5*(√2.480) = 0.20< 3.0 Note: The tune up power was declared by applicant. Result: Compliant. The stand-alone SAR evaluation is not necessary Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-03 Page 6 of 7 APPENDIX A - EUT PHOTOGRAPHS Please refer to the attachment 2407T42038E-RF-EXP EUT EXTERNAL PHOTOGRAPHS and 2407T42038E-RF-INP EUT INTERNAL PHOTOGRAPHS. Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-03 Page 7 of 7 Declarations 1. Bay Area Compliance Laboratories Corp. (Xiamen) is not responsible for authenticity of any information provided by the applicant. Information from the applicant that may affect test results are marked with an asterisk “★”. 2. Unless otherwise stated, the results shown in this test report refer only to the sample(s) tested. 3. Unless required by the rule provided by the applicant or product regulations, then decision rule in this report did not consider the uncertainty. 4. The extended uncertainty given in this report is obtained by combining the standard uncertainty times the coverage factor k=2 with the 95.45% confidence interval. 5. This report cannot be reproduced except in full, without prior written approval of Bay Area Compliance Laboratories Corp. (Xiamen). 6. This report is valid only with a valid digital signature. The digital signature may be available only under the adobe software above version 7.0. ***** END OF REPORT *****

Approval sheet Page 1 of 9 ASC_RFANT2012090A0T_V02 Mar. 2017 RFANT Pb free Series – RoHS Compliance MULTILAYER CERAMIC ANTENNA Halogens Free Product 2.4 GHz ISM Band RF Application P/N: RFANT2012090A0T *Contents in this sheet are subject to change without prior notice . Add: 24th floor, No. 1 Songzhi Road, Xinyi District, Taipei Approval sheet Page 2 of 9 ASC_RFANT2012090A0T_V02 Mar. 2017 FEATURES 1. Surface Mounted Devices with a small dimension of 2.0 x 1.25 x 0.9 mm 3 meet future miniaturization trend. 2. Embedded and LTCC (Low Temperature Co-fired Ceramic) technology is able to future integrate with system design as well as beautifying the housing of final product. 3. High Stability in Temperature / Humidity Change 4. Omni - directional in azimuth APPLICATIONS 1. Bluetooth 2. Wireless LAN 3. HormRF 4. ISM band 2.4GHz working frequency CONSTRUCTION Figure PIN Connection 1 Feeding 2 Soldering terminal DIMENSIONS Figure Symbol Dimension (mm) L 2.0 ± 0.20 W 1.25 ± 0.20 T 0.90 ± 0.10 A 0.25 ± 0.15 12 Approval sheet Page 3 of 9 ASC_RFANT2012090A0T_V02 Mar. 2017 ELECTRICAL CHARACTERISTICS RFANT2012090A0T Specification Working Frequency Range 2400 ～ 2500 MHz Gain 1.36 dBi (Typical) VSWR 2.0 max. Polarization Linear Azimuth Beamwidth Omni-directional Impedance 50 Rated Power (max.) 3 Watts Maximum Input Power 5 Watts for 5 minutes Operation Temperature -40°C ~ +85°C Remark: The specification is defined based on the test board dimension as in below SOLDER LAND PATTERN DESIGN Figure 1.36 dBi (Typical) Approval sheet Page 4 of 9 ASC_RFANT2012090A0T_V02 Mar. 2017 Antenna on Test Board ( FR4 Thickness 0.8mm) Antenna VSWR on Test Board Approval sheet Page 5 of 9 ASC_RFANT2012090A0T_V02 Mar. 2017 RADIATION PATTERN Radiation Pattern and Gain were dependent on measurement board design. The specification of RFANT2012090A0T antenna was measured based on the PCB size and installation position as shown in the below figure Test Board (XZ plane) + Z + X - Z - X Approval sheet Page 6 of 9 ASC_RFANT2012090A0T_V02 Mar. 2017 ZX plane ZY plane XY plane Frequency [MHz] Max Value [dBi] Average [dBi] Max Value [dBi] Average [dBi] Max Value [dBi] Average [dBi] 2400 0.89 -4.72 1.07 -0.64 -0.03 -3.73 2450 -0.11 -4.90 1.36 -0.54 0.20 -3.54 2500 -0.72 -5.43 0.95 -1.00 0.09 -3.77 (YZ plane) (XY plane) + Z - Z - Y + Y + X + Y - X - Y Approval sheet Page 7 of 9 ASC_RFANT2012090A0T_V02 Mar. 2017 RELIABILITY TEST Test item Test condition / Test method Specification Solderability JIS C 0050-4.6 JESD22-B102D *Solder bath temperature：235  5C *Immersion time：2  0.5 sec Solder：Sn3Ag0.5Cu for lead-free At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) IEC 60068-2-58 *Solder bath temperature：260  5C *Leaching immersion time：30  0.5 sec Solder : SN63A Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat JIS C 0050-5.4 *Preheating temperature：120~150°C, 1 minute. *Solder temperature：2705C *Immersion time：101 sec Solder：Sn3Ag0.5Cu for lead-free Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Loss of metallization on the edges of each electrode shall not exceed 25%. Drop Test JIS C 0044 Customer’s specification. *Height：75 cm *Test Surface：Rigid surface of concrete or steel. *Times：6 surfaces for each units；2times for each side. No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Vibration JIS C 0040 *Frequency：10Hz~55Hz~10Hz(1min) *Total amplitude：1.5mm *Test times：6hrs.(Two hrs each in three mutually perpendicular directions) No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Adhesive Strength of Termination JIS C 0051- 7.4.3 *Pressurizing force： 5N(≦0603)；10N(>0603) *Test time：10±1 sec No remarkable damage or removal of the termination. Bending test JIS C 0051- 7.4.1 The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm/s per second until the deflection becomes 1mm/s and then pressure shall be maintained for 51 sec. Measurement to be made after keeping at room temperature for 242 hours No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Approval sheet Page 8 of 9 ASC_RFANT2012090A0T_V02 Mar. 2017 Temperature cycle JIS C 0025 1. 303 minutes at -40C3C, 2. 10~15 minutes at room temperature, 3. 303 minutes at +85C3C, 4. 10~15 minutes at room temperature, Total 100 continuous cycles Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. High temperature JIS C 0021 *Temperature：85C2C *Test duration：1000+24/-0 hours Measurement to be made after keeping at room temperature for 242 hrs No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Humidity (steady conditions) JIS C 0022 *Humidity：90% to 95% R.H. *Temperature：402C *Time：1000+24/-0 hrs. Measurement to be made after keeping at room temperature for 242 hrs ※ 500hrs measuring the first data then 1000hrs data No mechanical damage. Electrical specification shall satisfy the descriptions in electrical characteristics under the operational temperature range within -40 ~ 85°C. Low temperature JIS C 0020 *Temperature：-40C2C *Test duration：1000+24/-0 hours Measu…

Text truncated - open the document above for the full version.

F CC PART 15.247 TEST REPORT For Guangzhou Munbyn Information Technology Co., Ltd. 329 3rd Floor, Tairong Business Center, No. 63 Xizeng Road, Liwan District, Guangzhou, China. FCC ID: 2A5LY-ITP02 Report Type: Original Report Product Name: Portable thermal printer Report Number: 2407T42038E-RF-01 Report Date: 2024-08-08 Reviewed By: Stein Peng Approves By: Miles Chen P repared By: B ay Area Compliance Laboratories Corp. (Xiamen) Unit 102, No. 902 Meifeng South Road, Binhai West Avenue, Science and Technology Innovation Park, Torch High tech Zone XiaMen Tel: +86-592-3200111 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Xiamen) Report No.: 2407T42038E-RF-01 FCC Part 15.247 Page 2 of 55 TABLE OF CONTENTS REPORT REVISION HISTORY................................................................................................................................. 4 GENERAL INFORMATION ....................................................................................................................................... 5 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 5 OBJECTIVE ................................................................................................................................................................... 5 TEST METHODOLOGY .................................................................................................................................................. 5 MEASUREMENT UNCERTAINTY .................................................................................................................................... 6 SYSTEM TEST CONFIGURATION .......................................................................................................................... 7 TEST MODE AND VOLTAGE .......................................................................................................................................... 7 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 7 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 7 ★EUT EXERCISE SOFTWARE ...................................................................................................................................... 7 DUTY CYCLE ................................................................................................................................................................ 8 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 8 EXTERNAL I/O CABLE .................................................................................................................................................. 9 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 9 SUMMARY OF TEST RESULTS ............................................................................................................................. 11 TEST EQUIPMENT LIST ......................................................................................................................................... 12 FCC §15.203 - ANTENNA REQUIREMENT ........................................................................................................... 13 APPLICABLE STANDARD ............................................................................................................................................ 13 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 13 FCC §15.207 (a) – AC LINE CONDUCTED EMISSIONS ..................................................................................... 14 APPLICABLE STANDARD ............................................................................................................................................ 14 EUT SETUP ................................................................................................................................................................ 14 EMI TEST RECEIVER SETUP ....................................................................................................................................... 14 TEST PROCEDURE ...................................................................................................................................................... 14 LEVEL &MARGIN CALCULATION ............................................................................................................................... 15 TEST DATA ................................................................................................................................................................ 16 FCC §15.209, §15.205 & §15.247(d) - SPURIOUS EMISSIONS ............................................................................. 18 APPLICABLE STANDARD ............................................................................................................................................ 18 EUT SETUP ................................................................................................................................................................ 18 EMI TEST RECEIVER & SPECTRUM ANALYZER SETUP .............................................................................................. 19 TEST PROCEDURE ...................................................................................................................................................... 20 LEVEL &MARGIN CALCULATION ............................................................................................................................... 20 TEST DATA ..............…

Text truncated - open the document above for the full version.