
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
FCC Statement WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The device must not be co-located or operating in conjunction with any other antenna or transmitter.
(SHANTOU SUCHIYU TECHNOLOGY CO.,LTD) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-28-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A5RO-SCY-10101 [SHANTOU SUCHIYU TECHNOLOGY CO.,LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [SHANTOU SUCHIYU TECHNOLOGY CO.,LTD] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24- 886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (HUANGDA XU) (SHANTOU SUCHIYU TECHNOLOGY CO.,LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-28-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A5RO-SCY-10101 [SHANTOU SUCHIYU TECHNOLOGY CO.,LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (HUANGDA XU)
Rev 11/20/07 SHANTOU SUCHIYU TECHNOLOGY CO.,LT 2026.7.28 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2A5RO-SCY-10101 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (Block Diagram, Schematics, Operational Description,) (SCH, Block Diagram,Technical Description,) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name ( () Sincerely, (signature) (printed name) HUANGDA XU
SHANTOU SUCHIYU TECHNOLOGY CO.,LTD FCC ID: 2A5RO-SCY-10101 Declaration of Identical Product Hereby, Name of manufacturer: SHANTOU SUCHIYU TECHNOLOGY CO.,LTD Address: DENGFENG ROAD, GUANGYI STREET, CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG City: SHANTOU Country: China declares that: Product description: REMOTE CONTROL MODEL CAR Type designation(s): SCY-10101PRO Trademark: NA Family name is technically identical to: Product description: REMOTE CONTROL MODEL CAR Type designation: SCY-10101 Trademark: NA Certificate number (if applicable) They are identical with the test model SCY-10101 except the color of the appearance and model number for trading purposes. Date: 2026.7.22 City: SHANTOU Name: HUANGDA XU Signature
Q:\Project folder\Project Folder 2026\Q-Z\X\信广威-CJPM\CJPM-WDG-P26050420 A单 SCY-10101 2.4G FCC ID\01 Customer Service\02 Technical Doc\TIMCO 申请资料 FCC\POA_Letter.docx SHANTOU SUCHIYU TECHNOLOGY CO.,LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2026.7.22 SUBJECT: FCC Application for FCC ID: 2A5RO-SCY-10101 To Whom It May Concern: We, the undersigned, hereby authorize _Edwin Ye by_Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch___ at __No. 96, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, Chinaon our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Edwin Yeby_Bureau Veritas Shenzhen Co., Ltd. Dongguan Branchon our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, HUANGDA XU
Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 3 Report Version A Reference No.: 2605WDG0420 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 3 Report Version A Reference No.: 2605WDG0420 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 3 Report Version A Reference No.: 2605WDG0420
Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 4 Report Version A Reference No.: 2605WDG0420 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 4 Report Version A Reference No.: 2605WDG0420 TX ANT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 4 Report Version A Reference No.: 2605WDG0420 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 4 Report Version A Reference No.: 2605WDG0420
Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 6 Report Version A Test Report No.: FM2605WDG0420 RF EXPOSURE REPORT Applicant SHANTOU SUCHIYU TECHNOLOGY CO., LTD Address DENGFENG ROAD, GUANGYI STREET, CHENGHAI DISTRICT,SHANTOU CITY, GUANGDONG, CHINA Manufacturer or Supplier SHANTOU SUCHIYU TECHNOLOGY CO., LTD Address DENGFENG ROAD, GUANGYI STREET, CHENGHAI DISTRICT,SHANTOU CITY, GUANGDONG, CHINA Product REMOTE CONTROL MODEL CAR Brand Name N/A Model SCY-10101 Additional Model & Model Difference SCY-10101PRO, see item 1 Date of tests Jul. 06, 2026 ~ Jul. 17, 2026 FCC Part 2 (Section 2.1093) KDB 447498 D01 V06 IEEE C95.1 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Loren Luo Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Jul. 27, 2026 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 6 Report Version A Test Report No.: FM2605WDG0420 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................ 3 1. CERTIFICATION .............................................................................................. 4 2. RF EXPOSURE DEFINE ................................................................................. 5 3. CLASSIFICATION ........................................................................................... 5 4. SAR TEST EXCLUSION THRESHOLDS ........................................................ 6 Test Report No.: FM2605WDG0420 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED FM2605WDG0420 Original release Jul. 27, 2026 Test Report No.: FM2605WDG0420 1. CERTIFICATION FCC ID: 2A5RO-SCY-10101 PRODUCT: REMOTE CONTROL MODEL CAR BRAND NAME: N/A MODEL NO.: SCY-10101 ADDITIONAL NO.: SCY-10101PRO APPLICANT: SHANTOU SUCHIYU TECHNOLOGY CO., LTD STANDARDS: FCC Part 2 (Section 2.1093) KDB 447498 D01 V06 IEEE C95.1 1. Additional models (see above table) are identical with the test model SCY-10101 except the color of the appearance and model number for trading purposes. Test Report No.: FM2605WDG0420 2. RF EXPOSURE DEFINE The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where ➢ f(GHz) is the RF channel transmit frequency in GHz ➢ Power and distance are rounded to the nearest mW and mm before calculation ➢ The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. 3. CLASSIFICATION The antenna of …
Text truncated - open the document above for the full version.
Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 34 Report Version A Test Report No.: RF2605WDG0420 TEST REPORT Applicant: SHANTOU SUCHIYU TECHNOLOGY CO., LTD Address: DENGFENG ROAD, GUANGYI STREET, CHENGHAI DISTRICT,SHANTOU CITY, GUANGDONG, CHINA Manufacturer or Supplier SHANTOU SUCHIYU TECHNOLOGY CO., LTD Address DENGFENG ROAD, GUANGYI STREET, CHENGHAI DISTRICT,SHANTOU CITY, GUANGDONG, CHINA Product: REMOTE CONTROL MODEL CAR Brand Name: N/A Model: SCY-10101 Additional Model & Model Difference SCY-10101PRO, see item 3.1 Date of tests: Jul. 06, 2026 ~ Jul. 17, 2026 the tests have been carried out according to the requirements of the following standard: FCC Part 15, Subpart C, Section 15.249 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Prepared by Loren Luo Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Jul. 27, 2026 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 34 Report Version A Test Report No.: RF2605WDG0420 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 3 1 SUMMARY OF TEST RESULTS .................................................................................................... 4 2 MEASUREMENT UNCERTAINTY ................................................................................................. 4 3 GENERAL INFORMATION ............................................................................................................ 5 3.1 GENERAL DESCRIPTION OF EUT........................................................................................... 5 3.2 DESCRIPTION OF TEST MODES............................................................................................. 5 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 8 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................................... 8 3.5 DUTY CYCLE OF TESET SIGNAL ............................................................................................ 9 4. TEST TYPES AND RESULTS ...................................................................................................... 10 4.1 RADIATED EMISSION MEASUREMENT ................................................................................ 10 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT .................................................... 10 4.1.2 TEST INSTRUMENTS ...................................................................................................... 11 4.1.3 TEST PROCEDURES ..................................................................................................... 12 4.1.4 DEVIATION FROM TEST STANDARD ........................................................................... 12 4.1.5 TEST SETUP ................................................................................................................... 13 4.1.6 EUT OPERATING CONDITIONS .................................................................................... 14 4.1.7 TEST RESULTS .............................................................................................................. 15 4.2 20DB BANDWIDTH MEASUREMENT ..................................................................................... 29 4.2.1 LIMITS OF 20DB BANDWIDTH MEASUREMENT ......................................................... 29 4.2.2 TEST INSTRUMENTS .................................................................................................... 29 4.2.3 TEST PROCEDURE ....................................................................................................... 30 4.2.4 DEVIATION FROM TEST STANDARD ........................................................................... 30 4.2.5 TEST SETUP ......................................................................…
Text truncated - open the document above for the full version.
Length:120mm Antenna Type: Wire Antenna Antenna Gain: 0.59dBi Antenna operates frequency range: 2405MHz ~ 2475MHz Only radiated measurements are used to show compliance with FCC limits for fundamental and spurious emissions.
Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 2 Report Version A Reference No.: 2605WDG0420 SET-UP FOR RADIATED EMISSION TEST Frequency Range< 30MHz~1GHz > Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 2 Report Version A Reference No.: 2605WDG0420 Frequency Range< Above 1GHz >
3722 Illinois Avenue · Saint Charles, Illinois, 60174 · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | - |

REMOTE CONTROL MODEL CAR
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Remote control model car
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter