2A5WP-JOY-1Neck Massager

FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits ar e designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a par ticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the r eceiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Oper ation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. ISED Canada Statement:This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,Science and Economic Development Canada 's licence exempt RSS(s). Operation is subject to the following two conditions: 1) this device may not cause interference and2) this device must accept any interference, including interference that may cause undesired operation of the device.Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment To maintain compliance with IC's RF Exposure guidelincs, This cquipment should be.installed and operated with minimum distance of 5m m the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter Déclaration de l'ISED Canada :Cet appareil contient des émetteurs / récepteurs exempts de licence qui sont conformes aux RSS exemptes de licence d'Innovation, Sciences et Développement économique Canada. L'opération est sous réserve des deux conditions suivantes : 1) cet appareil ne peut pas causer d'interférences et2) ce dispositif doit accepter toute interférence, y compris peut provoquer le fonctionnement indésirable de l'appareil.Exposition aux rayonnements : Cet équipement est conforme aux radiations du Canadalimites d'exposition pour un environnement incontr ô lé Pour maintenir le respect des guides d'exposition RF d'IC,cquipment doit être.installé et actionné avec une distance minimale de 5mm le radiateur de votre corps. Cet appareil et ses antennes ne doivent pas être co-localisé ou en opération en conjonction avec toute autre antenne ou émetteur

Office o Federa 7435 O Columb USA Subjec t FCC ID To Wh o Pursua are req u docume These d propriet might b It is ou r corresp docume authoriz Sincer e Signat u Name: Title: p r of Engineeri l Communic Oakland Mills bia, MD 210 t; Request f D: 2A5WP-J om It May C nt to the pro uesting the ents from pu documents tary informa be harmful to Schema Block D Parts Lis Operatio r understand pondence du ents and thi zation is iss ely, ure: Wenfeng W roduct engin sh ing Techno cations Com s Road 046 for Confiden JOY-1 Concern, ovisions of t Commissio ublic disclos contain det ation in ope o our comp atic Diagram iagram st onal Descri ding that all uring the ce s informatio sued. Wei neering henzhensh logy mmission ntiality the Commis on to withho sure indefin tailed syste ration of th e any and wo m ption l measurem ertification re on will be av hizeyuankej ssion’s rule old the follow nitely. m and equi e equipmen ould give co ment test rep eview proce vailable for jiyouxiang s Title 47 S wing attach pment desc nt. The publ ompetitors a ports, FCC ess cannot public revi e ongsi Sections §0. hment(s) as criptions an ic disclosu r an unfair ad ID label for be granted ew once the Date: May. 457 and §0 confidentia d are consi re of these d vantage in mat and as confide n e grant of eq 25, 2022 0.459, we al dered as documents the market . ntial quipment .

Model Difference Declaration To Whom It May Concern, We, shenzhenshizeyuankejiyouxiangongsi(Neck Massager) Trademark: AMAZMASS; Model Number: Joy-1, Joy-2, Joy-3, Joy-4, Glad-1, Glad-2, Glad-3, Colo-1, Colo-2, Fun-1, Fun-2; All model’s the function, software and electric circuit are the same, only with a product color and model named different. Test sample model: Joy-1. Please contact me if you have any question. Name: Wenfeng Wei Date: May. 25, 2022 Title: product engineering Signature of applicant:

Annex A External Photos Report No.: HK2203231128-E/HK2203231129-E Page 1 of 4 Report No.: HK2203231128-E/HK2203231129-E Page 2 of 4 Report No.: HK2203231128-E/HK2203231129-E Page 3 of 4 Report No.: HK2203231128-E/HK2203231129-E Page 4 of 4

Page 1 of 26 Report No.: HK2203231128-E Prepared for : shenzhenshizeyuankejiyouxiangongsi longhuajiedaosanlianshequ sanlianchuangyelu 19hao gongcunxincheng shangyezhongxin huihaiguangchang Bzuo 13ceng 1308 shenzhen guangdong, 518000 China Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Mar. 23, 2022 ~ May. 13, 2022 Date of Report: May. 13, 2022 Report Number: HK2203231128-E FCC TEST REPORT Test report On Behalf of shenzhenshizeyuankejiyouxiangongsi For Neck Massager Model No.: Joy-1, Joy-2, Joy-3, Joy-4, Glad-1, Glad-2, Glad-3, Colo-1, Colo-2, Fun-1, Fun-2 FCC ID: 2A5WP-JOY-1 Applica Address Manufa Address Produc Trade M Product Model a Standa This pu b Shenzh the ma t assume due to it Date of Date (s ) Date of Te s t R e s ant’s name s ................ acture's Na s ................ ct descriptio Mark: t name ........ and/or type rds ............ blication ma en HUAK T terial. Shenz e liability for ts placemen Test .......... ) of performa Issue ......... sult ............ T T A T ................. ................. me ............ ................. on .................... reference ................. ay be repro Testing Tech zhen HUAK r damages nt and conte .................. ance of test .................. .................. Testing Eng Technical M Authorized S TEST RES . : shenzhe . : longhua j gongcun 13ceng . : Shenzh e . : 4th Floo Longga n AMAZMA : Neck M a . : Joy-1, J o Fun-1, F . : FCC Pa r ANSI C6 duced in wh hnology Co K Te s t i n g Te resulting fr ext. ................ : ts ............. : ................ : ................ : gineer Manager Signatory Page 2 of 2 SULT CE enshizeyuan jiedaosanlia nxincheng s 1308 shenz en Pentasm r, No.2 Build ng District, S ASS assager oy-2, Joy-3, Fun-2 rt15 Subpar 63.10: 2013 hole or in p o., Ltd. is ac echnology C rom the rea Mar. 23, 2 May. 13, 2 Pass : : : 26 ERTIFICA nkejiyouxian anshequ sa shangyezho zhen guang mart Technol ding, Youya Shenzhen, , Joy-4, Gla rt C 2017, S art for non- cknowledge Co., Ltd. ta ader's interp 2022 ~ May. 2022 (Gary Q (Eden (Jason Z Repo ATION ngongsi nlianchuan g ongxin huiha dong, 5180 logy Co.,Ltd a Industrial Z China ad-1, Glad-2 Section 15.2 commercia ed as copyr kes no resp pretation of 13, 2022 Qian) Hu) Zhou) ort No.: HK22 gyelu 19ha aiguangcha 000 China d Zone, Pingh 2, Glad-3, C 31 l purposes right owner ponsibility fo f the reprod 203231128- o ng Bzuo hu Street, Colo-1, Colo as long as and sourc e or and will duced mate -E o-2, the e of not erial Page 3 of 26 Report No.: HK2203231128-E Contents 1 . TEST SUMMARY ............................................................................................................................................... 5 1.1 TEST FACILITY ......................................................................................................................................... 5 1.2 INFORMATION OF THE TEST LABORATORY ................................................................................... 5 1.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 5 2. General Information ............................................................................................................................................ 6 2.1. Description of Device (EUT) ................................................................................................................... 6 2.2. DESCRIPTION OF TEST SETUP ......................................................................................................... 7 2.3. List of channels ........................................................................................................................................ 7 2.5. Test Equipment List ................................................................................................................................. 8 3. Conducted Emission Test .................................................................................................................................. 9 3.1 Conducted Power Line Emission Limit .................................................................................................. 9 3.2 Test Setup .................................................................................................................................................. 9 3.3 Test Procedure .......................................................................................................................................... 9 3.4 Test Data .................................................................................................................................................. 10 4. Radiated Emissions .......................................................................................................................................... 11 4.1. Standard Applicable ............................................................................................................................... 11 4.2. Test Procedure ....................................................................................................................................... 11 4.3. Corrected Amplitude & Margin Calculation ........................................................................................ 13 4.4. Environmental Conditions ..................................................................................................................... 13 4.5. Test Data ................................................................................................................................................. 13 5. 20DB Occupy Bandwidth Test ......................................................................................................................... 16 5.1. Standard Applicable ..........................................................…

Text truncated - open the document above for the full version.

Radiated Emissions