2A66O-APS100All-in-One Telehealth Video Terminal

All-in-One Telehealth Video Terminal Quick Start Guide 1 Appearance and Interface No. Interface Description 1 DC 12V Power interface 2 USB 3.0 Connect to U-disk, mouse, keyboard and other USB devices. 3 USB 3.0 Connect to U-disk, mouse, keyboard and other USB devices. 4 HDMI IN Connect to PC or camera, support audio input. 5 HDMI OUT1 Connected to the terminal and HDTV with HDMI cable, support audio output and it will be muted automatically while use the built-in speaker. 6 HDMI OUT2 Connected to the terminal and HDTV with HDMI cable. 7 Touch Connect to tablet and other control device. 8 LAN Connect the terminal to the network with the network cable. 9 PC Used as a camera and speakerphone when connect to PC. 10 LINE IN 3.5mm audio input interface 11 LINE OUT 3.5mm audio output interface 2 Installation and Connection Operating this equipment in a residential environment may cause radio interference. The terminal can be placed on horizontal desktop or installed on the TV and wall with bracket. Desktop Installation Place the terminal on the desktop, keep the desktop steady and pay attention to the anti-slip. Install on TV with Bracket (optional) Install on Wall with Bracket Warning Connection The cable connections shown in the following figure contains optional configurations and for reference only. Please connect the cables according to actual needs. Power Connect Connect the power cord to the supplied power adapter, and then connect the terminal to the power outlet with the power adaptor. Network Connect  Connect LAN with the network cable;  Or, connect the LAN via Wi-Fi. Audio Input  Audio input via the built-in microphone;  Or, connect a microphone to the USB interface with the USB cable.  Connect a mixer to the LINE IN interface with the 3.5mm cable. Audio Output  Audio output via the built-in speaker;  Or, connect TV to the HDMI OUT1 interface with the HDMI cable;  Or, connect a speaker to the LINE OUT interface with the 3.5mm cable. Image Input  Image input via the built-in camera.  Connect camera to the HDMI IN interface with the HDMI cable;  Or, connect a PC or other devices to the HDMI IN interface with the HDMI cable. Image Output  Connect TV and other display devices to the HDMI OUT1 interface with the HDMI cable to output the main image.  Connect TV and other display devices to the HDMI OUT2 interface with the HDMI cable to output the second image. 3 Product Dimension 4 Troubleshooting No Response Please try to reboot APS100. Not Enough Storage Space 1) System storage space is low, please make sure you have 250MB of free space and reboot APS100. 2) The total storage of APS100 is 8G, when storage space is not enough, please try to clear some data to release the storage. Wi-Fi Network Cannot Access the Internet Please contact with Caregility IT department to check whether the device has the permission to access the Internet. 5 Cleaning Guide For the Whole Camera Cleaning The user can take a rag, dip in Ethyl Alcohol Absolute to wipe the appearance gently. For the Speaker Cover Cleaning Fabric model: CY-B51-1, the main component is polyester fiber, the surface of the fabric is treated with waterproof technology, and the backside viscose technology is added. Cleaning Precautions  Wipe with soft brush at room temperature.  No long-term alkali resistance, please choose a neutral volatile cleaning agent. *Although we have done and passed the corrosion resistance test of chemical reagents, for the long-term cleaning and maintenance of APS100, it is recommended to use Ethyl Alcohol Absolute for cleaning. Audio CableNetwork CableNetwork CableAudio Cable SpeakerMixerSwitch Power Plug Power Adapter ComputerPC HDMI CableHDMI CableHDMI Cable USB CableUSB Cable HDTVHDTVTab let MIC min min max max JOHN DOE12:34JOHN DOE12:34 Mai nStr eet, n umber, City Name(Countr y ) 123-456-789 www.yourd o m a i n .co m you rname@ domain .com DC 12VUSB 3.0 USB 3.0 PCLINE INLINE OUT HDMI IN HDMI OUT1 HD MI OUT 2 To u c hL A N 135.0 114.7 99.2 6 Important Safety Instructions  Parts of the ME EQUIPMENT that are not serviced or maintained while in use with the patient.  Instructions provided indicating not to position ME EQUIPMENT to make it difficult to operate the disconnection device.  Warning statement that addressed the HAZARDS the ME EQUIPMENT.  Unplug the power cable to power off.  Do not leave the equipment in an uncontrolled environment where the storage temperature is below -20 C (-4 F) or above 60 C (140 F) and the relative humidity is below 30% or above 75% it may damage the equipment. 7 FCC Compliance Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not…

Text truncated - open the document above for the full version.

UNITED STATES DESIGNATED AGENT LETTER Date: 2023-05-25 TO:Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 U.S. designated agentApplicant Company Name: Grantee Code: Contact Name: Address: City/Province/Zip: Telephone: Fax: Email: Caregility 2A660 Brad Goodwin 81 Corbett Way, Eatontown, New Jersey 07724 United States (908) 489-5545 [email protected] Company Name: Contact Name: Address: City/Province/Zip: Telephone: Fax: Email: Caregility Brad Goodwin 81 Corbett Way, Eatontown, New Jersey 07724 United States (908) 489-5545 [email protected] Applicable Equipment: FCC ID: 2A660-APS1 OO ATTN: Director of Certification: We, Caregility understand and acknowledge the applicants consent and the designated agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Caregility acknowledge the applicant's acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant Name (Printed): Brad Goodwin Title: Compliance Signature: IJ.S. designated agent Name (Printed): Brad Goodwin Title: Compliance anage Signature•

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 5 External Photos for SZCR2303000897AT FCC ID: 2A66O-APS100 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 5

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 13 Internal Photos for SZCR2303000897AT FCC ID: 2A66O-APS100 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 13 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 6 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 7 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 8 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 9 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 10 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 11 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 12 of 13 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 13 of 13 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300089706 Page: 1 of 14 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2303000897AT Applicant: Caregility Address of Applicant: 81 Corbett Way, Eatontown, New Jersey, 07724, United States Manufacturer: Caregility Address of Manufacturer: 81 Corbett Way, Eatontown, New Jersey, 07724, United States Factory: ValueHD Corporation Address of Factory: 3/F, Building 2, Honghui Industrial Park, Xin'an Street, Bao'an District, Shenzhen, China Equipment Under Test (EUT): EUT Name: All-in-One Telehealth Video Terminal Model No.: APS100 Trade Mark: FCC ID: 2A66O-APS100 Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-03-31 Date of Test: 2023-04-04 to 2023-05-27 Date of Issue: 2023-05-31 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300089706 Page: 2 of 14 Revision Record Version Chapter Date Modifier Remark 01 2023-05-31 Original Authorized for issue by: Leo Li/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300089706 Page: 3 of 14 2 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Contents ............................................................................................................................................. 3 3 General Information............................................................................................................................ 4 3.1 General Description of E.U.T. ....................................................................................................... 4 3.2 Separation Distance ..................................................................................................................... 6 3.3 Test Location ............................................................................................................................... 7 3.4 Test Facility .................................................................................................................................. 7 3.5 Deviation from Standards ............................................................................................................. 7 3.6 Abnormalities from Standard Conditions ....................................................................................... 7 4 FCC Radiofrequency radiation exposure limits ................................................................................ 8 4.1 Blanket 1 mW Blanket Exemption ................................................................................................. 8 4.2 MPE-based Exemption ................................................................................................................. 8 4.3 SAR-based Exemption ................................................................................................................. 9 5 Measurement and Calculation ..........................................................................................................12 5.1 Maximum transmit power ............................................................................................................12 5.2 RF Exposure Calculation .............................................................................................................13 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300089706 Page: 4 of 14 3 General Information 3.1 General Description of E.U.T. Power supply: DC 12V from adapter input AC 120V/60Hz Adapter Model: TS-A036-120030L Input: 100-240V~50/60Hz 1.2A Output: DC 12V 3A Cable(s): Adapter AC cable: 100cm unshielded Adapter DC cable: 180cm unshielded with a core HDMI cable: 100cm unshielded For BT: Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 Dual mode Modulation Type: GFSK, pi/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Antenna Type: FPC Antenna Antenna Gain: 5.03dBi For BLE: Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 Dual mode Data Rate: 1M/bps & 2M/bps Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: FPC Antenna Antenna Gain: 5.03dBi For Wi-Fi 2.4GHz: Operation Frequency: 802.11b/g/n(HT20) )/ax(HEW20): 2412MHz to 2462MHz; 802.11n(HT40) )/ax(HEW40): 2422MHz to 2452MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK), 802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) 802.11ax: OFDMA(16QAM, 64QAM, 256QAM, 1024QAM, QPSK, BPSK) Number of Channels: 802.11b/g/n(HT20)/ax(HEW20): 11;802.11n(HT40)/ax(HEW40):7 Channel Spacing: 5MHz Antenna Type: FPC Antenna SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300089706 Page: 5 of 14 Antenna Gain: ANT1: 3.94dBi ANT2: 3.60dBi For Wi-Fi 5GHz: Operation Frequency/Number of channels (20MHz): U-NII-1: 5180-5240MHz (4 Channels) U-NII-2A: 5260-5320MHz (4 Channels) U-NII-2C: 5500-5700MHz (11 Channels) U-NII-3: 5745-5825MHz (5 Channels) Operation Frequency/Number of channels/(40MHz): U-NII-1: 5190-5230MHz (2 Channels) U-NII-2A: 5270-5310MHz (2 Channels) U-NII-2C: 5510-5670MHz (5 Channels) U-NII-3: 5755-5795MHz (2 Channels) Operation Frequency/Number of channels (80MHz): U-NII-1: 5210MHz (1 Channel) U-NII-2A: 5290MHz (1 Channels) U-NII-2C: 5530-5610MHz (2 Channels) U-NII-3: 5775MHz (1 Channel) Modulation Type: 802.11a: OFDM (64QAM, 16QAM, QPSK, BPSK); 802.11n: OFDM (BPSK, QPSK, 16QAM, 64QAM); 802.11ac: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM…

Text truncated - open the document above for the full version.

ProductSpecificationsforApproval Materialpartnumber：WF4221B-1131R-180(Grey) WF4221B-1131R-150(Black) WF4221B-1131R-120(Grey) Customername:ValueHDCorporation Model:APS100 Antennafrequencyband: WIFI2.4G/5.8G/BT Revision:R-AProductiondate: 20 23- 01 -12 ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo,LTD ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo,LTD ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo,LTD Researchanddevelopmentof ShenzhenRuifengElectronicTechnologyCo,LTD 1. ProjectinformationandElectricalSpecification Those specifications were specially defined for ValueHD Corporation APS100， WIFI2.4G/5.8G/BT, and all characteristics were measured under the model’s handset testing jig . 1-1 Antennapicture(Seethe drawingsfrompage2-4) 1-2FrequencyBand : FrequencyBandMHz WIFI2.4G/5.8G/BT 2400-5850（MHz） 1-3Impedancematching ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo,LTD 2.VSWR MeasuringMethod: 1.A50Ωcoaxialcableisconnectedtotheantenna.Thenthiscable isconnectedtoanetworkanalyzertomeasuretheVSWR, 2.Keepingthisjigawayfrommetalatleast20cm.VSWRparametervalue MHZ2400 2450250051505350555057505850 Ω35.942.651.567.850.255.654.256.4 VSWR1.411.191.211.371.171.111.221.13 Returnloss-15.25-21.24-20.6-15.97-21.74-25.34-20.01-24.01 WIFI1 ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo,LTD MHZ2400 2450250051505350555057505850 Ω33.8440.6847.6758.1448.4756.0852.7959.96 VSWR1.621.271.081.251.041.141.161.2 Returnloss-12.45-18.76-27.62-18.87-32.71-23.23-22.48-20.64 MHZ2400 2450250051505350555057505850 Ω29.4834.4346.5655.3153.2647.5539.539.29 VSWR1.781.461.131.11.091.21.231.28 Returnloss-11.02-14.69-24.79-25.94-26.78-20.77-18.61-18.17 WIFI2 WIFI3 Researchanddevelopmentof ShenzhenRuifengElectronicTechnologyCo,LTD 3. EfficiencyandGain *measuringandtestinstruments: Microwaveanechoicchamber,Agilentnetworkanalyzer,Agilentspectrumanalyzer, 8960comprehensivetester,standardantenna*testmethod: The equipmentis fixedon the centerof the turntablewiththe H surfaceon the same horizontallineas thecenterof thehornantenna.Efficiency/Gain- WIFI2.4G/5.8G/BT WIFI 1 Researchanddevelopmentof ShenzhenRuifengElectronicTechnologyCo,LTD WIFI 2 Researchanddevelopmentof ShenzhenRuifengElectronicTechnologyCo,LTD WIFI 3 ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo,LTD ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo,LTD 4.WIFIOTAData 2.4GWIFI TRPTIS Channel CH1CH6CH12CH1CH6CH12 802.11b，11M 19.7919.6319.24-77.25-76.43-76.28 802.11g,54M 19.1519.0619-66.11-66.72-67.09 802.11n，MCS7(65M) 19.4619.1418.73-66.48-66.61-67.56 5.8G802.11A，(5.8G)54M ChannelCH36CH60CH165 TRP18.9318.8917.38 TIS-74.11-73.97-73.38 5.Theproductionindex Whentheantennaismass-produced,theVSWRisusedasthemass-productiontest standard. Accordingtothedifferencesoftheprojectitself,thefollowingstandardsaregiven: FrequencyMassproductioncriteria WIFI2.4G/5.8G/BT VSWR(massproductionproduct)<VSWR (designsample)+/-0.5 ResearchanddevelopmentofShenzhenRuifengElectronicTechnologyCo,LTD 6.Antennainstallationlocationdiagram 7.Environmentaltreatment ‘TheareaabovetheWifimoduleispastedwithconductivefoamandmetalheatsinkforgrounding’

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300089703 Page: 1 of 81 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2303000897AT Applicant: Caregility Address of Applicant: 81 Corbett Way, Eatontown, New Jersey, 07724, United States Manufacturer: Caregility Address of Manufacturer: 81 Corbett Way, Eatontown, New Jersey, 07724, United States Factory: ValueHD Corporation Address of Factory: 3/F, Building 2, Honghui Industrial Park, Xin'an Street, Bao'an District, Shenzhen, China Equipment Under Test (EUT): EUT Name: All-in-One Telehealth Video Terminal Model No.: APS100 Trade Mark: FCC ID: 2A66O-APS100 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2023-03-31 Date of Test: 2023-04-04 to 2023-05-27 Date of Issue: 2023-05-31 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300089703 Page: 2 of 81 Revision Record Version Chapter Date Modifier Remark 01 2023-05-31 Original Authorized for issue by: Leo Li/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300089703 Page: 3 of 81 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300089703 Page: 4 of 81 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 6 4.1 Details of E.U.T. ........................................................................................................................... 6 4.2 Description of Support Units ......................................................................................................... 6 4.3 Measurement Uncertainty ............................................................................................................ 7 4.4 Test Location ............................................................................................................................... 8 4.5 Test Facility .................................................................................................................................. 8 4.6 Deviation from Standards ............................................................................................................. 8 4.7 Abnormalities from Standard Conditions ....................................................................................... 8 5 Equipment List ................................................................................................................................... 9 6 Radio Spectrum Technical Requirement ..........................................................................................13 6.1 Antenna Requirement .................................................................................................................13 6.1.1 Test Requirement: ..................................................................................................................13 6.1.2 Conclusion ..............................................................................................................................13 7 Radio Spectrum Matter Test Results ................................................................................................14 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) ..........................................................14 7.1.1 E.U.T. Operation .....................................................................................................................14 7.1.2 Test Mode Description ............................................................................................................14 7.1.3 Test Setup Diagram ................................................................................................................15 7.1.4 Measurement Procedure and Data .........................................................................................15 7.2 Conducted Peak Output Power ................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300089704 Page: 1 of 228 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2303000897AT Applicant: Caregility Address of Applicant: 81 Corbett Way, Eatontown, New Jersey, 07724, United States Manufacturer: Caregility Address of Manufacturer: 81 Corbett Way, Eatontown, New Jersey, 07724, United States Factory: ValueHD Corporation Address of Factory: 3/F, Building 2, Honghui Industrial Park, Xin'an Street, Bao'an District, Shenzhen, China Equipment Under Test (EUT): EUT Name: All-in-One Telehealth Video Terminal Model No.: APS100 Trade Mark: FCC ID: 2A66O-APS100 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2023-03-31 Date of Test: 2023-04-04 to 2023-05-27 Date of Issue: 2023-05-31 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300089704 Page: 2 of 228 Revision Record Version Chapter Date Modifier Remark 01 2023-05-31 Original Authorized for issue by: Leo Li/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300089704 Page: 3 of 228 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.2 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230300089704 Page: 4 of 228 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 6 4.1 Details of E.U.T. ........................................................................................................................... 6 4.2 Description of Support Units ......................................................................................................... 7 4.3 Measurement Uncertainty ............................................................................................................ 7 4.4 Test Location ............................................................................................................................... 8 4.5 Test Facility .................................................................................................................................. 8 4.6 Deviation from Standards ............................................................................................................. 8 4.7 Abnormalities from Standard Conditions ....................................................................................... 8 5 Equipment List ................................................................................................................................... 9 6 Radio Spectrum Technical Requirement ..........................................................................................13 6.1 Antenna Requirement .................................................................................................................13 6.1.1 Test Requirement: ..................................................................................................................13 6.1.2 Conclusion ..............................................................................................................................13 7 Radio Spectrum Matter Test Results ...................................................................…

Text truncated - open the document above for the full version.