2A6C2779WT-300intercom

• COMRACT AND LIGHTWEIGHTS。 • EASY TO USE. PUSH-TO-TALK BUTTON. • GREAT FUN FOR INDOOR AND OUTDOOR OUTDOOR ACTIVITIES. AGES 5+ YEARS -Large TALK button - simply press to talk Operating range can be significantly reduced during indoor use due to interference from electrical equipment such as computers and/or large metallic objects. -Each unit requires 3 x 1.5V (AA) Batteries Not Included TO REPLACE BATTERIES: BATTERY PRECAUTIONS -Non rechargeable batteries are not to be recharged. -Rechargeable batteries are to be removed from the toy before being charged. -Rechargeable batteries are only to be charged under adult supervision. -Different types of batteries or old and new batteries are not to be mixed. -Only batteries of the same or equivalent type as recommended are to be used. -Batteries are to be inserted with the correct polarity. -Exhausted batteries are to be removed from the toy. -The supply terminals are not to be short-circuited. -Check and replace batteries periodically to prevent corrosion. -Keep unit away from extreme heat. -Do not dispose of batteries in fire, batteries may explode or leak. WARNING: THIS DEVICE IS CAPABLE OF COMMUNICATING WITH CB RADIO TRANSCEIVERS PLEASE KEEP THIS PACKAGING FOR FURTHER REFEREN FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. SAR tests are conducted using standard operating positions accepted by FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model is a available for sale to the public, it must be tested and certified to the FCC that is does not exceed the exposure limit established by the FCC. Tests for each product are performed in positions and locations as required by the FCC. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with and accessory designated for this product or when used with and accessory that contains no metal. To maintain compliance with FCC RF exposure guidelines hold the transmitter and antenna at least 1 inch (2.5 centimeters) from your face and speak in a normal voice, with the antenna pointed up and away from the face. The equipment complies with FCC radiation exposure limits set forth for and uncontrolled environment. In order to comply with the FCC RF exposure requirement, the antenna installation must comply with following: Users must be fully aware of the hazards of the exposure and able to exercise control over their RF exposure to qualify for the higher exposure limits. Your wireless hand-held portable transceiver contains a low power transmitter. This product sends out radio frequency (RF) signals when the Push-to-Talk(PTT) button is pressed. The device is authorized to operate at a duty factor not to exceed 50%.

QA-FR-170-B Shantou Chenghai Chenghua Aotian Toys Factory Add: Fengxin Industrial Zone, Fengxin 2nd Road, Chenghai District, Shantou, Guangdong, China Tel: +86 13750464600 Fax: N/A Email: [email protected] FCC Authorization Date: 2022-03-10 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Shantou Chenghai Chenghua Aotian Toys Factory, hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Printed Name: Decheng Cai Title: General Manager

QA-FR-171-A Shantou Chenghai Chenghua Aotian Toys Factory Add: Fengxin Industrial Zone, Fengxin 2nd Road, Chenghai District, Shantou, Guangdong, China Tel: +86 13750464600 Fax: N/A Email: [email protected] FCC Confidential Authorization Date: 2022-03-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2A6C2779WT-300 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Shantou Chenghai Chenghua Aotian Toys Factory hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed Name: Decheng Cai Title: General Manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Antenna

SAR TEST REPORT Applicant: Shantou Chenghai Chenghua Aotian Toys Factory Address: Fengxin Industrial Zone, Fengxin 2nd Road, Chenghai District, Shantou, Guangdong, China FCC ID: 2A6C2779WT-300 Product Name: intercom Model Number: 779WT-300 Multiple Models: 779WT-300W, 779WT-300X, 779WT- 300Y, 779WT-300Z Standard(s): 47 CFR Part 2(2.1093) The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR22030028-20 Date Of Issue: 2022-04-19 Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR22030028-20 Page 2 of 35 SAR TEST RESULTS SUMMARY Operation Frequency Bands Highest Reported 1g SAR (W/kg) Limits (W/kg) Head Face Up (Gap 25mm) Body-Worn (Gap 0mm) PTT(462.5625MHz) 0.01 0.01 1.6 Maximum Simultaneous Transmission SAR Items Head Face Up (Gap 25mm) Body-Worn (Gap 0mm) Limits Sum SAR(W/kg) N/A N/A 1.6 SPLSR N/A N/A 0.04 EUT Received Date: 2022/03/10 Tested Date: 2022/03/12 Tested Result: Pass China Certification ICT Co., Ltd (Dongguan) Report No.: CR22030028-20 Page 3 of 35 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR22030028-20 Page 4 of 35 CONTENTS SAR TEST RESULTS SUMMARY .............................................................................................. 2 TEST FACILITY .......................................................................................................................................... 3 DECLARATIONS .......................................................................................................................................... 3 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 TEST SPECIFICATION, METHODS AND PROCEDURES ........................................................................ 7 1.3 SAR LIMTS ........................................................................................................................................... 8 2. SAR MEASUREMENT SYSTEM ............................................................................................ 9 3. EQUIPMENT LIST AND CALIBRATION .......................................................................... 16 3.1 EQUIPMENTS LIST & CALIBRATION INFORMATION ....................................................................... 16 4. SAR MEASUREMENT SYSTEM VERIFICATION ........................................................... 17 4.1 LIQUID VERIFICATION ...................................................................................................................... 17 4.2 SYSTEM ACCURACY VERIFICATION ................................................................................................. 18 4.3 SAR SYSTEM VALIDATION DATA ............................................................................................. 19 5. EUT TEST STRATEGY AND METHODOLOGY .............................................................. 20 5.1 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR ......................................... 20 5.2 CHEEK/TOUCH POSITION .................................................................................................................. 21 5.3 EAR/TILT POSITION ........................................................................................................................... 21 5.4 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS ............................................... 22 5.5 TEST DISTANCE FOR SAR EVALUATION .......................................................................................... 23 5.6 SAR EVALUATION PROCEDURE ....................................................................................................... 24 6. CONDUCTED OUTPUT POWER MEASUREMENT ........................................................ 25 6.1 TEST PROCEDURE .............................................................................................................................. 25 6.2 MAXIMUM TARGET OUTPUT POWER ............................................................................................... 25 6.3 TEST RESULTS: .................................................................................................................................. 25 7. SAR MEASUREMENT RESULTS .................................................…

Text truncated - open the document above for the full version.

TEST REPORT Applicant: Shantou Chenghai Chenghua Aotian Toys Factory Address: Fengxin Industrial Zone, Fengxin 2nd Road, Chenghai District, Shantou, Guangdong, China FCC ID: 2A6C2779WT-300 Product Name: intercom Model Number: 779WT-300, 779WT-300W, 779WT-300X, 779WT- 300Y, 779WT-300Z Standard(s): 47 CFR Part 95 Subpart B ANSI C63.26-2015 ANSI/TIA 603-E-2016 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR22030028-00B Date Of Issue: 2022-04-16 Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR22030028-00B Page 2 of 27 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR22030028-00B Page 3 of 27 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 1. GENERAL INFORMATION .................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 5 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 6 1.2.2 Support Equipment List and Details .............................................................................................................. 6 1.2.3 Support Cable List and Details ...................................................................................................................... 6 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 6 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 7 2. SUMMARY OF TEST RESULTS ............................................................................................ 8 3. REQUIREMENTS AND TEST PROCEDURES .................................................................... 9 3.1 FRS FREQUENCY ACCURACY .............................................................................................................. 9 3.1.1 Applicable Standard ....................................................................................................................................... 9 3.1.2 EUT Setup Block Diagram ............................................................................................................................ 9 3.1.3 Test Procedure ............................................................................................................................................... 9 3.2 RF OUTPUT POWER ........................................................................................................................... 10 3.2.1 Applicable Standard ..................................................................................................................................... 10 3.2.2 EUT Setup Block Diagram .......................................................................................................................... 10 3.2.2 Test Procedure ............................................................................................................................................. 10 3.3 FRS EMISSION TYPES ......................................................................................................................... 10 3.3.1 Applicable Standard ..................................................................................................................................... 10 3.3.2 Judgment ...................................................................................................................................................... 10 3.4 FRS AUTHORIZED BANDWIDTH ....................................................................................................... 11 3.4.1 Applicable Standard ..................................................................................................................................... 11 3.4.2 EUT Setup Block Diagram .......................................................................................................................... 11 3.4.2 Test Procedure .........…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View