2A6CL-CR1034Emergency Radio

Emergency Weather Alert Radio 三EmergencvAlertRadio with S.A.M.E. Localized Programming 如AA Weather Radio NOAA's National Weathe『Service ＠ FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to 「adio or television reception, which can be dete「minedby turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna -- I ncrease the separation between the equipment and receiver -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment This device complies with part 15 of the FCC Rules. Operation is sub」ectto the cond仆ionthat this device does not cause harmful Interference. This device complies with part 15 of the FCC Rules. Operation is sub」ectto the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference「eceived,including interference that may cause undesired operation FCC ID.: 2A6CL-CR1034 C E:芘RoHS仑回Madein China Version 1.0 The maximum reception frequency of this product is 108 MHz.

Rev 1/26/2023 Shen Zhen Yelaw Technology Co., LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-27-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A6CL-CR1034 [Shen Zhen Yelaw Technology Co., LTD] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shen Zhen Yelaw Technology Co., LTD] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Xiehe Fang Rev 1/26/2023 Shen Zhen Yelaw Technology Co., LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-27-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A6CL-CR1034 [ Shen Zhen Yelaw Technology Co., LTD ] ce8rtifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Xiehe Fang

Shen Zhen Yelaw Technology Co., LTD U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: August 27, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2A6CL-CR1034 Shen Zhen Yelaw Technology Co., LTD (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: Shen Zhen Yelaw Technology Co., LTD FRN: 0032239253 Address: 4th Floor, Building D, Xinyong Fengxin Industrial Park, Fengzheng Road, Shiyan Street Baoan District, Shenzhen China Signature: Contact Person: Xiehe Fang Tel: +86-13823304183 Email: [email protected]

Shen Zhen Yelaw Technology Co., LTD Date: August 27, 2026 Product Model Number: CR1034, CR1034Pro FCC ID: 2A6CL-CR1034 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Xiehe Fang Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: +86-13823304183 On behalf of: Shen Zhen Yelaw Technology Co., LTD

Shen Zhen Yelaw Technology Co., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 27, 2026 Subject; Request for Confidentiality FCC ID: 2A6CL-CR1034 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Xiehe Fang Title: Manager

Shen Zhen Yelaw Technology Co., LTD Model Difference Statement DATE: August 27, 2026 FCC ID: 2A6CL-CR1034 Dear Sir/Madam, Added models CR1034Pro asis of the original product CR1034. The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: Xiehe Fang Title: Manager Company name: Shen Zhen Yelaw Technology Co., LTD Address: 4th Floor, Building D, Xinyong Fengxin Industrial Park, Fengzheng Road, Shiyan Street Baoan District, Shenzhen China

Report No: SSP26080271 FCC ID:2A6CL-CR1034 Annex of Test Report Annex A. EUT External Photos Model: CR1034 EUT View 1 EUT View 2 Report No: SSP26080271 FCC ID:2A6CL-CR1034 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP26080271 FCC ID:2A6CL-CR1034 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP26080271 FCC ID:2A6CL-CR1034 Annex of Test Report EUT View 7 EUT View 8 Report No: SSP26080271 FCC ID:2A6CL-CR1034 Annex of Test Report EUT View 9

Report No: SSP26080271 FCC ID:2A6CL-CR1034 Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Labe Size: 50mm *20mm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

Report No: SSP26080271 FCC ID:2A6CL-CR1034 Annex of Test Report Annex B. EUT Internal Photos Model: CR1034 EUT Internal View 1 EUT Internal View 2 Receive ANT Report No: SSP26080271 FCC ID:2A6CL-CR1034 Annex of Test Report EUT Internal View 3 EUT Internal View 4 Report No: SSP26080271 FCC ID:2A6CL-CR1034 Annex of Test Report EUT Internal View 5

Report No: SSP26080271-1 EMC Test Report Page 1 of 16 EMC TEST REPORT FCC ID: 2A6CL-CR1034 - Report No. : SSP26080271-1 Applicant : Shen Zhen Yelaw Technology Co., LTD Product Name : Emergency Radio Model Name : CR1034 Test Standard : FCC Part 15 Subpart B Date of Issue : 2026-08-24 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.zrlklab.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26080271-1 EMC Test Report Page 2 of 16 Test Report Basic Information Applicant..................................: Shen Zhen Yelaw Technology Co., LTD Address of Applicant...............: 4th Floor, Building D, Xinyong Fengxin Industrial Park, Fengzheng Road, Shiyan Street Baoan District, Shenzhen China Manufacturer..........................: Dongguan Hexinying Technology Co., LTD Address of Manufacturer........: No. 8 Xinyongda Road, Shipai Town, Dongguan City, 523025, Guangdong, CN Product Name.........................: Emergency Radio Brand Name.............................: - Main Model..............................: CR1034 Series Models..........................: CR1034Pro Test Standard..........................: FCC Part 15 Subpart B ANSI C63.4-2014 Date of Test .............................: 2026-08-14 to 2026-08-20 Test Result...............................: PASS Tested By ................................: (Bai Bai) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26080271-1 EMC Test Report Page 3 of 16 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................5 1.3 Compliance Standards ...........................................................................................................................................6 1.4 Test Facilities ........................................................................................................................................................6 1.5 Measurement Uncertainty .....................................................................................................................................6 1.6 List of Test and Measurement Instruments ............................................................................................................7 2. Summary of Test Results .............................................................................................................................................8 3. Conducted Emissions ..................................................................................................................................................9 3.1 Standard and Limit................................................................................................................................................9 3.2 Test Procedure......................................................................................................................................................9 3.3 Test Data and Results ............................................................................................................................................9 4. Radiated Disturbance ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 12 Report No: SSP26080271-1 EMC Test Report Page 4 of 16 Revision History Revision Issue Date Description Revised By V1.0 2026-08-24 Initial Release Lahm Peng Report No: SSP26080271-1 EMC Test Report Page 5 of 16 1. General Information 1.1 Product Information Product Name: Emergency Radio Trade Name: - Main Model: CR1034 Series Models: CR1034Pro Test Sample No: SSP26080271-1 Class of Equipment: Class A Class B Highest Internal Frequency: <108MHz Rated Voltage: Input: AC 120V/60Hz Note 1: The test data is gathered from a production sample, provided by the manufacturer. Note 2: The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. 1.2 Test Setup Information List of Test Modes Test Mode Description Remark TM1 Charging + Working AC 120V/60Hz TM2 Dry cell + Working - List and Details of Auxiliary Cable Description Length (cm) Shielded/Unshielded With/Without Ferrite - - - - - - - - - - - - List and Details of Auxiliary Equipment Description Manufacturer Model Serial Number - - - - - - - - - - - - The equipment under test (EUT) was configured to measure its highest possible emission and immunity level. …

Text truncated - open the document above for the full version.

Report No: SSP26080271 FCC ID:2A6CL-CR1034 Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View Below 1GHz