2A6GW-ST200Mini Stepper with Bluetooth Low Energy

2. Install the bettery Open the back cover, make sure the bettery installed correctly, then open the back cover. Note: use the 1.5V, #7 bettery, and +,- polarity. Tech+Fitness (ios&Android) 1.Download APP software Please scan the QR or go to the APP store to download it. ON: One cycle on the stepper can be atuo start. OFF: Not used after three minutes of use, it can be closed. 3. ON/OFF 4. Connection Make sure that the bluetooth of the phone or ipad is on normally, place the device close to the phone or ipad, enter the app and search for the device in the admin and select the connection. 5. WARRANTY CARD Address E-mail Phone Number -- CityStateZip First NameLast Name Customer Information Purchase Date Where you purchased Model #Serial # Pr oduct Information D DM MY Y Y Y loading... Tech+Fitness (ios&Android) 8. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequ- ency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com- munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device. 9. STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Sever GAME INSTRUCTIONS After each exercise, open the APP and upload the date to the icloud automatically. 6. Data sync 7. STATUS INDICATION For your better experience, we will continue to upgrade the sensor, please keep the phone or iPad connected to the device properly, and ensure the power is not less than 50%.

Sportsoul Co., Ltd Date (05/27/2022) TUV SUD BABT UNLIMITED TCB Octagon House, Segensworth Road, Fareham, Hampshire, P015 .5RL Confidentiality Request FCC ID: 2A6GW-ST200 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission's Rules, Sportsoul Co., Ltd hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation Sportsoul Co., Ltd also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of (180) days: Internal Photos External Photos User Manual Test Set-up Photographs The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Name/Title: Tony Li/ Engineer Telephone Number: 86 18100372253 Email: [email protected]

Sportsoul Co.,Ltd Name: Mini Stepper Model: ST200 FCC ID: 2A6GW-ST200 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Sportsoul Co.,Ltd Name: Mini Stepper Model: ST200 FCC ID: 2A6GW-ST200 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 50mm 28mm

EMC_SZ_FR_20.00 E-I Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 1 of 2 Internal Photos EMC_SZ_FR_20.00 E-I Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 2 of 2 BT Antenna

68.910.20.0042.01A TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 RF exposure Estimation 1.Introduction Product: Mini Stepper Model no.: ST200 FCC ID: 2A6GW-ST200 The EUT is Mini Stepper, which contain Bluetooth function inside. 2.Limit and Guidelines on Exposure to Electromagnetic Fields According to§15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB 447498 D01 Mobile Portable RF Exposure v05r02, no SAR required if power is lower than the flowing threshold: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation25 • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. 3.Calculation method [(max. power of` channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 Conducted Power + tune up tolerance =-0.96dBm= 0.802mW Distance = 5 mm f = 2.402 GHz [0.802/5] * SQRT (2.402) =0.249 0.249≤ 3.0 Therefore, excluded from SAR testing. - TÜV SÜD Shenzhen LTD. - Reviewed by: Prepared By: Mark Chen/EMC Project Manager Mark Chen/EMC Project Engineer Date: 2022-06-22 Date: 2022-06-22

Report Number: 68.910.20.0042.01 EMC_SZ_FR_21.00 FCC Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 88285299 Page 1 of 37 FCC - TEST REPORT Report Number:68.910.20.0042.01Date of Issue:May 31, 2022 Model:ST200 Product Type:Mini Stepper Applicant:Sportsoul Co., Ltd Address:No.3 Road, Qingdao, Industrial District, Qingdao, China Factory:Qingdao Triple Master health technologies Co., LTD.. Address:No.3 Road, Qingda Industrial District, ChengYang, Qingdao, China Test Result:nPositiveoNegative Total pages including Appendices:37 Any use for advertising purposes must be granted in writing. This technical report may only be quoted in full. This report is the result of a single examination of the object in question and is not generally applicable evaluation of the quality of other products in regular production. For further details, please see testing and certification regulation, chapter A-3.4. Report Number: 68.910.20.0042.01 EMC_SZ_FR_21.00 FCC Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 88285299 Page 2 of 37 1 Table of Contents 1Table of Contents......................................................................................................................................................... 2 2Details about the Test Laboratory .............................................................................................................................. 3 3Description of the Equipment Under Test .................................................................................................................. 4 4Summary of Test Standards ....................................................................................................................................... 5 5Summary of Test Results ............................................................................................................................................ 6 6General Remarks ......................................................................................................................................................... 7 7Test Setups .................................................................................................................................................................. 8 8Systems test configuration .......................................................................................................................................... 9 9Technical Requirement.............................................................................................................................................. 10 9.1Conducted peak output power .......................................................................................................................... 10 9.2Power spectral density ...................................................................................................................................... 13 9.36 dB Bandwidth and 99% Occupied Bandwidth .............................................................................................. 16 9.4Spurious RF conducted emissions ................................................................................................................... 20 9.5Band edge .......................................................................................................................................................... 24 9.6Spurious radiated emissions for transmitter .................................................................................................... 26 10Test Equipment List ............................................................................................................................................... 36 11System Measurement Uncertainty ....................................................................................................................... 37 Report Number: 68.910.20.0042.01 EMC_SZ_FR_21.00 FCC Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 88285299 Page 3 of 37 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District Shenzhen 518052 P.R. China Telephone:86 755 8828 6998 Fax:86 755 8288 5299 FCC Registration No.: 514049 Report Number: 68.910.20.0042.01 EMC_SZ_FR_21.00 FCC Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 88285299 Page 4 of 37 3 Description of the Equipment Under Test Product: Mini Stepper Model no.: FCC ID: ST200 2A6GW-ST200 Options and accessories: N/A Rating:3.0VDC(Supplied by 2*1.5V battery) RF Transmission Frequency: 2402MHz-2480MHz No. of Operated Channel: 40 Modulation:GFSK Antenna Type:PCB Antenna Antenna Gain:-3dBi Description of the EUT:The Equipment Under Test (EUT) isMini Stepperoperated at 2.4GHz Report Number: 68.910.20.0042.01 EMC_SZ_FR_21.00 FCC Release 2014-03-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 88285299 Page 5 of 37 4 Summary of Test Standard…

Text truncated - open the document above for the full version.

Radiated Emission Test below 1GHz Radiated Emission Test 1GHz-18GHz Radiated Emission Test 18GHz-40GHz