2A6MS-B21SBone conduction sport Bluetooth earphones

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC Statement

ShenzhenZhichuangAllTechnologyCo.,Ltd 31stFloor,WestTowerofXingheTwinTowers,No. 8YaxingRd,BantianSt,LonggangDist,Shenzhen FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 2024-07-30 Towhomitmayconcern: We,ShenzhenZhichuangAllTechnologyCo.,Ltd,herebycertifythattheequipmentfor whichauthorizationissought(FCCID:2A6MS-B21S)isnot"covered"equipmentprohibitedfrom receivinganequipmentauthorizationpursuantto§2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,wearenotidentifiedontheCovered List(https://www.fcc.gov/supplychain/coveredlist)asanentityproducing"covered"equipment. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirementslisted under§2.911(b)and(d)(5)and(6). TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRas wellasKDB986446D01. Sincerely, Signature HongzhiLin ShenzhenZhichuangAllTechnologyCo.,Ltd

ShenzhenZhichuangAllTechnologyCo.,Ltd 31stFloor,WestTowerofXingheTwinTowers,No. 8YaxingRd,BantianSt,LonggangDist,Shenzhen FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 2024/07/30 U.S.AgentDesignation ShenzhenZhichuangAllTechnologyCo.,Ltdacknowledgestheirconsentforthefollowingcontactlocatedin theUnitedStatestoactastheiragentforserviceofprocessfortheequipmentforwhichauthorizationissought (FCCID:2A6MS-B21S） NameandcompanyofU.S.agent:MoloImportExportLLC PhysicalU.S.addressofagent:2334CrystalMileCT,TomsRiver,NJ,08755,USA FRNofU.S.agent: 0033490996 EmailaddressofU.S.agent:[email protected] MoloImportExportLLCacknowledgestheirobligationtoacceptserviceofprocessonbehalfofShenzhen ZhichuangAllTechnologyCo.,Ltd ShenzhenZhichuangAllTechnologyCo.,LtdwiththeFRN[0032310831]acceptsitsobligationtomaintainan agentforserviceofprocessintheUnitedStatesfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S.,orthe conclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheveris later. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirementslistedunder§ 2.911(d)(7). TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB 986446D01. Anexpirationdateforthisletterdoesnotexist.IncasetheU.S.agentchanges,thegranteeisobligatedtonotify theFCCwithin30daysviathegrantingTCB. Sincerely, Signature HongzhiLin Manager ShenzhenZhichuangAllTechnologyCo.,Ltd Signature SamuelWeiss Manager MoloImportExportLLC 4 8 _ [ m o d e l ] U S _ A g e n t _ 2 . 9 1 1 ( d ) ( 7 ) - U , V 0 5

CONFIDENTIALITYREQUEST forCertificationServiceinUSA FederalCommunicationCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21046 Date:<2024-07-30> PursuanttoParagraphs$0.457and0.459oftheCommission'sRules(47C.F.R.)and Section§552(b)(4)oftheFreedomofInformationAct,werequestsconfidentialityfor thefollowingproducts: FCCID Modelname 2A6MS-B21SsanagB21S Fortheproductstatedabove,werequestthatthefollowinginformationbeheld confidential; Thelong-termconfidentialityexhibitscontainourtradesecretsandproprietary informationthatcouldbeofbenefittoourcompetitors. Theshort-termconfidentialityonthebasisofensuringthatbusinesssensitive informationremainsconfidentialuntiltheactualmarketingofournewdevice. Ifyouhaveanyquestions,pleasefeelfreetocontactmeattheaddressshownbelow. Sincerely Name/Title:HongzhiLin /N/A Company:ShenzhenZhichuangAllTechnologyCo.,Ltd Address:31stFloor,WestTowerofXingheTwinTowers,No.8Yaxing Rd,BantianSt,LonggangDist,Shenzhen Phone:13662230505 Fax: N/A E-Mail:[email protected]

ShenzhenZhichuangAllTechnologyCo.,Ltd 31stFloor,WestTowerofXingheTwinTowers,No. 8YaxingRd,BantianSt,LonggangDist,Shenzhen FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 2024-07-30 Towhomitmayconcen: We,theundersigned,herebyauthorizeEurofinsProductServiceGmbHtoactonourbehalfinallmatters relatingtoapplicationsforequipmentauthorizationFCCID:2A6MS-B21Sincludingthesigningofall documentsrelatedtothesematters. AnyandallactscarriedoutbyEurofinsProductServiceGmbHonourbehalfshallhavethesameeffect asactsofourown. Bysigningthisapplicationform,weagreetoEurofins'currentvalidGeneralTermsandConditions (AGB),TestingandCertificationRegulations(PZO)whichcanbeviewedonfollowingwebsite www.eurofins.de/eeorretrievedonrequest. Wealsoherebycertifythatnopartytothisapplicationissubjecttoadenialofbenefits,includingFCC benefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21U.S.C.862. Sincerely Name/Title Company: Address: Phone: Fax: E-Mail: HongzhiLin/N/A ShenzhenZhichuangAllTechnologyCo.,Ltd 31stFloor,WestTowerofXingheTwinTowers,No. 8YaxingRd,BantianSt,LonggangDist,Shenzhen 13662230505 NA [email protected]

Page: 1 of 3 PHOTOGRAPHSOFEUT FCCID:2A6MS-B21S ExternalPhotos Page: 2 of 3 ExternalPhotos Page: 3 of 3 ExternalPhotos

Page: 1 of 2 PHOTOGRAPHSOFEUT FCCID:2A6MS-B21S InternalPhotos Page: 2 of 2 InternalPhotos

DongguanDNTestingCo.,Ltd. Add:No.1,WestFourthStreet,XingfaSouthRoad,WushaCommunity,Chang'anTown,DongguanCity,GuangdongP.R.China Web:www.dn-testing.comTel:+86-769-88087383E-mail:[email protected] RFExposureEvaluationReport ApplicationNo.: DNT241312R1740-4865 Applicant: ShenzhenZhichuangAllTechnologyCo.,Ltd AddressofApplicant: 31stFloor,WestTowerofXingheTwinTowers,No.8YaxingRd,Bantian St,LonggangDist,Shenzhen,China EUTDescription: BoneconductionsportBluetoothearphones ModelNo.: sanagB21S FCCID: 2A6MS-B21S Powersupply DC3.7VFromBattery ChargingVoltage: DC5V Standards: 47CFRPart2.1093 FCCKDB447498D04v01 TradeMark: sanag DateofReceipt: 2024/6/17 DateofTest: 2024/6/19to2024/6/28 DateofIssue: 2024/7/23 TestResult:PASS PreparedBy:(TestingEngineer) ReviewedBy:(ProjectEngineer) ApprovedBy:(Manager) Note:Ifthereisanyobjectiontotheresultsinthisreport,pleasesubmitawritteninquirytothecompanywithin15daysfromthedateof receivingthereport.Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,andisissuedbythecompanyinaccordance withtherequirementsofthe"ConditionsofIssuanceofTestReports"printedintheattachedpage.Unlessotherwisestated,theresults presentedinthisreportonlyapplytothesamplestestedthistime.Partialreproductionofthisreportisnotallowedunlessapprovedbythe companyinwriting. ReportNo.:DNT241312R1740-4865Date：July.23,2024Page： 2 / 7 DongguanDNTestingCo.,Ltd. Add:No.1,WestFourthStreet,XingfaSouthRoad,WushaCommunity,Chang'anTown,DongguanCity,GuangdongP.R.China Web:www.dn-testing.comTel:+86-769-88087383E-mail:[email protected] ReportReviseRecord ReportVersionReviseTimeIssuedDateValidVersionNotes V2.0/July.23,2024ValidOriginalReport ReportNo.:DNT241312R1740-4865Date：July.23,2024Page： 3 / 7 DongguanDNTestingCo.,Ltd. Add:No.1,WestFourthStreet,XingfaSouthRoad,WushaCommunity,Chang'anTown,DongguanCity,GuangdongP.R.China Web:www.dn-testing.comTel:+86-769-88087383E-mail:[email protected] Contents RFEXPOSUREEVALUATIONREPORT.............................................................................................................................................1 1GENERALINFORMATION..................................................................................................................................................................4 1.1TESTLOCATION.................................................................................................................................................................................4 1.2GENERALDESCRIPTIONOFEUT.....................................................................................................................................................4 2RFEXPOSUREEVALUATION............................................................................................................................................................5 2.1RFEXPOSURECOMPLIANCEREQUIREMENT..................................................................................................................................5 ReportNo.:DNT241312R1740-4865Date：July.23,2024Page： 4 / 7 DongguanDNTestingCo.,Ltd. Add:No.1,WestFourthStreet,XingfaSouthRoad,WushaCommunity,Chang'anTown,DongguanCity,GuangdongP.R.China Web:www.dn-testing.comTel:+86-769-88087383E-mail:[email protected] 1GeneralInformation 1.1TestLocation Company:DongguanDNTestingCo.,Ltd Address: No.1,WestFourthStreet,SouthXinfaRoad,WushaLiwu,Chang＇anTown, DongguanCity,GuangdongP.R.China Testengineer:WayneLin 1.2GeneralDescriptionofEUT Manufacturer: DongguanChiyuanJizhiElectronicTechnologyCo.,Ltd AddressofManufacturer: Room3228,No.50WeiminRoad,DongchengStreet,DongguanCity, GuangdongProvince Factory: DongguanChiyuanJizhiElectronicTechnologyCo.,Ltd AddressofFactory: Room3228,No.50WeiminRoad,DongchengStreet,DongguanCity, GuangdongProvince EUTDescription: BoneconductionsportBluetoothearphones TestModelNo.:sanagB21S AdditionalModel(s): / ChipType: AC7006F Serialnumber: PR241312R1740 PowerSupply: DC3.7VFromBattery ChargingVoltage: DC5V TradeMark:sanag HardwareVersion:V0.2 SoftwareVersion:V2.0 SampleType: PortableDevice,Module,MobileDevice AntennaType:External,Integrated AntennaGain: Providedbyapplicant 2.21dBi Remark: *Sincetheabovedataand/orinformationisprovidedbytheapplicantrelevantresultsorconclusionsofthisreportare onlymadeforthesedataand/orinformation,DNTisnotresponsiblefortheauthenticity,integrityandresultsofthe dataandinformationand/orthevalidityoftheconclusion. ReportNo.:DNT241312R1740-4865Date：July.23,2024Page： 5 / 7 DongguanDNTestingCo.,Ltd. Add:No.1,WestFourthStreet,XingfaSouthRoad,WushaCommunity,Chang'anTown,DongguanCity,GuangdongP.R.China Web:www.dn-testing.comTel:+86-769-88087383E-mail:[email protected] 2RFExposureEvaluation 2.1RFExposureComplianceRequirement 2.1.1Limits HumanexposuretoRFemissionsfromportabledevices(47CFR§2.1093),asdefinedbytheFCC,mustbe evaluatedwithrespecttotheFCC-adoptedlimitsforSAR.Evaluationofmobiledevices,asdefinedbytheFCC,may alsobeperformedwithrespecttoSARlimits,butinsuchcasesitisusuallysimplerandmorecost-effectiveto evaluatecompliancewithrespecttofieldstrengthorpowerdensitylimits.Forcertaindevicesthataredesignedtobe usedinbothmobileandportableconfigurationssimilartothosedescribedin47CFR§2.1091(d)(4),suchascertain desktopphonesandwirelessmodemmodules,complianceformobileconfigurationsisalsosatisfiedwhenthesame deviceisevaluatedforSARcomplianceinportableconfigurations. Referto47CFR§2.1093: Aportabledeviceisdefinedasatransmittingdevicedesignedtobeusedinotherthanfixedlocationsandto generallybeusedinsuchawaythattheRFsource'sradiatingstructure(s)is/arewithin20centimetersofthebody oftheuser. Evaluationofcompliancewiththeexposurelimitsin§1.1310ofthischapter,andpreparationofanEAifthelimits areexceeded,isnecessaryforportabledeviceshavingsingleRFsourceswithmorethananavailablemaximum time-averagedpowerof1mW,morethantheERPlistedinTable1to§1.1307(b)(3)(i)(C),ormorethanthePthin thefollowingformula,whicheverisgreater.Thefollowingformulashallonlybeusedinconjunctionwithportable devicesnotexemp…

Text truncated - open the document above for the full version.

承 認 書 SPECIFICATION FOR APPROVAL 客戶名稱 CUSTOMER ： 客戶料號 CUSTOMER’S P/N ： 料號 PART NUMBER ： WAN3216F245H0X 規格 DESCRIPTION ： Chip Antenna 3216 L Ant 2.45G Type 0X 版本 VERSION ： V2.1 日期 ISSUE DATE ： 2018/07/01 客 戶 承 認 CUSTOMER APPROVED 工 程 部 R&D CENTER 承 認 APPROVAL 確 認 CHECKED 製 作 DRAWN Ray Nate Kelvin 萬誠科技股份有限公司 OneWave Electronic Co., Ltd. 112台北市北投區中央南路二段36號3樓 2F., No.163, Sec. 1, Xi'an St., Beitou Dist., Taipei City 112, Taiwan 電話: (02) 2898-2220 TEL: +886 2 2898-2220 傳真: (02) 2898-5055 FAX: +886 2 2898-5055 2/11 ONEWAVE TECHNOLOGY CO., LTD. 3216 Chip antenna For Bluetooth / WLAN Applications Dimension (mm) L 3.23 ± 0.20 W 1.66 ± 0.20 T 0.45 ± 0.20 P/N: WAN3216F245H0X 3/11 ONEWAVE TECHNOLOGY CO., LTD. Part Number Information WAN 3216 F 245 H 0X A B C D E F A Product Series Antenna B Dimension L x W 3.2X1.6mm (+-0.2mm) C Material High K material D Working Frequency 2.4 ~ 2.5GHz E Feeding mode PIFA & Single Feeding F Antenna type X=06,07,08 / Type=06,07,08 1. Electrical Specification Remark : Bandwidth & Peak Gain was measured under evaluation board of next page Specification Part Number WAN3216F245H0X Central Frequency 2450 MHz Bandwidth 120 (Min.) MHz Return Loss -6.5 (Max) dB Peak Gain 2.21dBi Impedance 50 Ohm Operating Temperature -40～+85 °C Maximum Power 4 W Resistance to Soldering Heats 10 ( @ 260°C) sec. Polarization Linear Azimuth Beamwidth Omni-directional Termination Ni / Au (Leadless) 4/11 ONEWAVE TECHNOLOGY CO., LTD. 2. Recommended PCB Pattern Evaluation Board Dimension 2 nd Evaluation Board Dimension Suggested Matching Circuit 重要資訊 : 匹配元件建議使用精準度±1%以下的電感、電容、電阻 Layout Dimensions in Clearance area( Size=5.9*5.0mm) 5/11 ONEWAVE TECHNOLOGY CO., LTD. FootPrint (Unit : mm) ◆ 2 nd Layout Dimensions in Clearance area( Size=8.0*3.0mm) Matching Circuit 50 ohm transmission Line 6/11 ONEWAVE TECHNOLOGY CO., LTD. 3. Measurement Results Return Loss 7/11 ONEWAVE TECHNOLOGY CO., LTD. Radiation Pattern Efficiency Peak Gain Directivity 2450MHz 85.65% 2.21 dBi 2.89 dBi Chamber Coordinate System X Y Z 8/11 ONEWAVE TECHNOLOGY CO., LTD. 4.Reliability and Test Condictions ITEM REQUIREMENTS TEST CONDITION Solderability 1. Wetting shall exceed 90% coverage 2. No visible mechanical damage Pre-heating temperature:150°C/60sec. Solder temperature:230±5°C Duration:4±1sec. Solder:Sn-Ag3.0-Cu0.5 Flux for lead free: rosin Solder heat Resistance 1. No visible mechanical damage 2. Central Freq. change :within ± 6% 10±0.5 sec. 60sec .. TEMP (°C) 150°C 260°C Pre-heating temperature:150°C/60sec. Solder temperature:260±5°C Duration:10±0.5sec. Solder:Sn-Ag3.0-Cu0.5 Flux for lead free: rosin Component Adhesion (Push test) 1. No visible mechanical damage The device should be reflow soldered(230±5°C for 10sec.) to a tinned copper substrate A dynometer force gauge should be applied the side of the component. The device must with-ST-F 0.5 Kg without failure of the termination attached to component. Component Adhesion (Pull test) 1. No visible mechanical damage Insert 10cm wire into the remaining open eye bend ,the ends of even wire lengths upward and wind together. Terminal shall not be remarkably damaged. Thermal shock 1. No visible mechanical damage 2. Central Freq. change :within ±6% Phase Temperature(°C) Time(min) 1 +85±5°C 30±3 2 Room Temperature Within 3sec 3 -40±2°C 30±3 4 Room Temperature Within 3sec +85°C=>30±3min -40°C=>30±3min Test cycle:10 cycles The chip shall be stabilized at normal condition for 2~3 hours before measuring. Resistance to High Temperature 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature: 85±5°C Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. Resistance to Low Temperature 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature:-40±5°C Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. Humidity 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature: 40±2°C Humidity: 90% to 95% RH Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. 4±1 sec. 60sec TEMP (°C) 150°C 230°C 9/11 ONEWAVE TECHNOLOGY CO., LTD. 5.Soldering and Mounting Mildly activated rosin fluxes are preferred. The minimum amount of solder can lead to damage from the stresses caused by the difference in coefficients of expansion between solder, chip and substrate. The terminations are suitable for all wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. Recommended temperature profiles for re-flow soldering in Figure 1. Products attachment with a soldering iron is discouraged due to the inherent process control limitations. In the event that a soldering iron must be employed the following precautions are recommended. ‧Preheat circuit and products to 150°C ‧Never contact the ceramic with the iron tip ‧Use a 20 watt soldering iron with tip diameter of 1.0mm ‧280°C tip temperature (max) ‧1.0mm tip diameter (max) ‧Limit soldering time to 3 sec. SOLDERING COOLING NATURAL PRE-HEATING TEMPERATURE(°C) 60~120 s 10s max. 30~60s 250~260 230 180 150 TIME(sec.) Reflow Soldering SOLDERING COOLING NATURAL PRE-HEATING TEMPERATURE(°C) within 3s Gradualcooling 150 TIME(sec.) Iron Soldering Over 60s 350 300 10/11 ONEWAVE TECHNOLOGY CO., LTD. 6.Packaging Information Tape Specification: Reel Specification: (7’’, Φ180 mm) Tape Width(mm) A(mm) B(mm) C(mm) D(mm) Chip/Reel(pcs) 8 9.0±0.5 60±2 13.5±0.5 178±2 3000 11/11 ONEWAVE TECHNOLOGY CO., LTD. 7.Storage and Transportation Information Storage Conditions To maintain the solderability of terminal electrodes: 1. Temperature and humidity conditions: -10~ 40°C and 30~70% RH. 2. Recommended products should be used within 6 months from the time of delivery. 3. The packaging material shoul…

Text truncated - open the document above for the full version.

DongguanDN TestingCo., Ltd. Add:No. 1, WestFourthStreet,XingfaSouthRoad,WushaCommunity,Chang'an Town,DongguanCity, GuangdongP.R.China Web:www.dn-testing.comTel:+86-769-88087383E-mail:[email protected] FCC Test Report ApplicationNo.: DNT241312R1740-4864 Applicant: ShenzhenZhichuangAll TechnologyCo., Ltd Addressof Applicant: 31st Floor,WestTowerof XingheTwinTowers,No. 8 YaxingRd, Bantian St,LonggangDist, Shenzhen, China EUT Description: BoneconductionsportBluetoothearphones ModelNo.: sanagB21S FCC ID: 2A6MS-B21S PowerSupply: DC 3.7VFromBattery ChargingVoltage: DC 5V TradeMark: sanag Standards: 47 CFRFCCPart 2, SubpartJ 47 CFRPart 15, SubpartC ANSI C63.10: 2013 Dateof Receipt: 2024/6/17 Dateof Test: 2024/6/19to 2024/6/28 Dateof Issue: 2024/7/23 Test Result:PASS PreparedBy:(TestingEngineer) ReviewedBy:(ProjectEngineer) ApprovedBy:(Manager) Note:If thereis any objectionto the resultsin this report,pleasesubmita writteninquiryto the companywithin15 daysfrom the date of receivingthe report.The test reportis effectiveonly with both signatureand specializedstamp,and is issuedby the companyin accordance with the requirementsof the "Conditionsof Issuanceof Test Reports"printedin the attachedpage.Unlessotherwisestated,the results presentedin this reportonly applyto the samplestestedthis time.Partialreproductionof this reportis not allowedunlessapprovedby the companyin writing. ReportNo.:DNT241312R1740-4864Date：July.23, 202 4Page： 2 / 58 DongguanDN TestingCo., Ltd. Add:No. 1, WestFourthStreet,XingfaSouthRoad,WushaCommunity,Chang'an Town,DongguanCity, GuangdongP.R.China Web:www.dn-testing.comTel:+86-769-88087383E-mail:[email protected] ReportReviseRecord ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/ Jul.23, 202 4 ValidOriginalReport ReportNo.:DNT241312R1740-4864Date：July.23, 202 4Page： 3 / 58 DongguanDN TestingCo., Ltd. Add:No. 1, WestFourthStreet,XingfaSouthRoad,WushaCommunity,Chang'an Town,DongguanCity, GuangdongP.R.China Web:www.dn-testing.comTel:+86-769-88087383E-mail:[email protected] 1 TestSummary Test ItemTest RequirementTest MethodTest ResultResult AntennaRequirement 15.203/247(b) --Clause3.1PASS 20dBEmissionBandwidth 15.247(a)(1) ANSIC63.10(2013)Clause3.2PASS ConductedPeakOutput Power 15.247(b)(1) ANSIC63.10(2013)Clause3.3PASS CarrierFrequencies Separation 15.247(a)(1) ANSIC63.10(2013)Clause3.4PASS DwellTime 15.247(a)(1) ANSIC63.10(2013)Clause3.5PASS HoppingChannelNumber 15.247(a)(1) ANSIC63.10(2013)Clause3.6PASS Band-edgefor RF ConductedEmissions 15.247(d) ANSIC63.10(2013)Clause3.7PASS RF ConductedSpurious Emissions 15.247(d) ANSIC63.10(2013)Clause3.8PASS RadiatedSpurious emissions 15.247(d); 15.205/15.209 ANSIC63.10(2013)Clause3.9PASS Restrictedbandsaround fundamentalfrequency(Radiated Emission) 15.247(d); 15.205/15.209 ANSIC63.10(2013)Clause3.10PASS AC PowerLine Conducted Emission 15.207 ANSIC63.10(2013)Clause3.1 1NA Note: 1. “N/A ” denotestest is not applicablein this test report . ReportNo.:DNT241312R1740-4864Date：July.23, 202 4Page： 4 / 58 DongguanDN TestingCo., Ltd. Add:No. 1, WestFourthStreet,XingfaSouthRoad,WushaCommunity,Chang'an Town,DongguanCity, GuangdongP.R.China Web:www.dn-testing.comTel:+86-769-88087383E-mail:[email protected] Contents 1 Test Summary.............................................................................................................................................................3 2 GeneralInformation.....................................................................................................................................................5 2.1Test Location................................................................................................................................................5 2.2GeneralDescriptionof EUT .........................................................................................................................6 2.3ChannelList .................................................................................................................................................7 2.4Test Environmentand Mode........................................................................................................................8 2.5PowerSettingof Test Software....................................................................................................................9 2.6Descriptionof SupportUnits........................................................................................................................9 2.7Test Facility..................................................................................................................................................9 2.8MeasurementUncertainty(95%confidencelevels,k= 2) ..........................................................................10 2.9EquipmentList ............................................................................................................................................11 2.10Assistantequipmentusedfor test ..............................................................................................................12 3 Test resultsand MeasurementData .........................................................................................................................13 3.1AntennaRequirement................................................................................................................................13 3.220dBEmissionBandwidth.........................................................................................................................14 3.3ConductedOutputPower...........................................................................................................................15 3.4CarrierFrequenciesSeparationy...............................................................................................................16 3.5DwellTim e.................................................................................................................................…

Text truncated - open the document above for the full version.

Page: 1 of 2 TestSetupOfEUT FCCID:2A6MS-B21S RadiatedEmissionTestView|(Below1G) Page: 2 of 2 RadiatedEmissionTestView|(Above1G)