2A6OM-FC-E02Fatassy Smart Pet Feeder

Quick Guide Hold down the top two buttons to open the lid Disassemble the food hooper and take out the food bowl � 1 , - Install the food bowl properly Open the desiccant box and put 1n the desiccant Deslccant|,- ： ： 三 ＿ (IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE Wh en using an electrical appliance, especially when children are present, basic safety precautions should always be followed, including the following INTENDED USE • Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with, in or around the appliance • Intended for use with dogs or cats only. Do not use this pet feeder with puppies, kittens, dogs or cats not able to reach the food tray or with any physical disab山ty • Use the appliance only for intended household purposes as described in this User Manual R / 沪叮h e food will be」ammedif not fixed in place Close the lid properly l <三>l User The arrow should be aligned with the scale mark te counter-clockwise take out the impeller 勹 1 Powe「oc with Plu g le Plug le w ith Type-C cable a cd tum oc the swit c h oc the bot­ tom of the device • Device will be offline with only battery mode • The backup battery is only work feeding when powe「cut The filled pet food shall not exceed the MAX line on the food hooper ｀ ， Press the Control Button twice to eed one portion, repeat the operation但m过§_portions @ • DO NOT operate the appliance if it has a damaged power cord or plug, or if it is malfunctioning or has been damaged 1n any manner • DO NOT immerse power cord, plugs, or the device base in water or other liquid or allow moisture to come into contact with these parts • To reduce the risk of electrical shock, do not place or store an appliance where it can fall or be pulled into a tub or sink • Always unplug the appliance when not in use, before putting on or taking off parts and before cleaning. Never unplug by pulling on power cord • The weight of fi 「 st portion may not accucate, please do instant feed twice to ensuce it wocks no「mally Note: The food size shou Id be less than 12mm Scan the QR code o「Search "Tuya Smart'in A pp Sto「eto download the a pp Rizzari Manual Fatassy Smart Pet Feeder ELECTRICITY SAFETY RELATED TO USE • DO NOT attempt to disassemble, repair, modify or replace any part any part of your product. All servicing should be performed by qualified personnel only. No user serviceable parts inside , Only use attachments recommended or sold by the manufacturer • Install 3 D batteries as backup power in case of power failure • DO NOT allow pets to chew on or swallow any parts. Cover or hide the power cord with care to prevent pets from biting • DO NOT lift the pet feeder by lid, hopper, bowl or bowl holder Lift and carry feeder using both hands and hopper base, while keeping unit in upright position • Install or store pet feeder on a level surface against wall or in a corner to avoid tripping • For dry food use only. Do not use wet, canned, moist food or pet food with special shapes, holes or diameter above 12mm/0.6 inch • Before leaving for extended time, always replace batteries with new batteries. Check operation frequently to be sure the pet feeder 1s dispensing properly • Dispose of all packaging materials properly. Keep away from children and pets (components) / 1 x Desiccant Bag (* Replace every 30 days) Food Hooper -1- Pro ｀ 勹 Dim Seal Cover A p Pow Co Foo Wi ca Wa ， : Power Socket } , ＇ , I, － － － － － [ ＇, （（J, @ Speaker 1 x Power Adapter USB-A to C Cable Non-slip Mat Pre 1.P l e oth 2.P l e bu of 3To in a 4.P l e cor 5.Do 6Thi diam foo 7The the 8. If t re p 9The -2- )duct Name Fatassy Smart Pet Feeder nens1on 31Ox190x341 mm 1 p licable for Small dogs/ Cats wer Su pp ly 5V=1A ,nnection Bluetooth Connected od T y p e Dry Pet Food within 12mm Fi Router Distance 10m p acity 4.2L 1rrantyOne Year

C5266091_X24_Ed.2 1/1 Shenzhen Haobang Biological Medicine Co.,ltd. “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen Haobang Biological Medicine Co.,ltd. Grantee code: 2A6OM FCC ID: 2A6OM-FC-E02 Contact Name: JIAO LI Address: 2 Floor, No 1 Facility Building, Xiangxiang Industrial Park,Yingrenshi Community, Shiyan Street, Baoan District, Shenzhen, Guangdong, China Telephone No: 13088887368 Fax No: / Email: [email protected] FRN: 0032326605 i. [Shenzhen Haobang Biological Medicine Co.,ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Shenzhen Haobang Biological Medicine Co.,ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Shenzhen Haobang Biological Medicine Co.,ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered”equipment . Date: 2024/02/19 Applicant’s Name: JIAO LI Title: General Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

C5266091_X8_Ed.1 1/1 Shenzhen Haobang Biological Medicine Co.,ltd. Letter of Authorization Company: Shenzhen Haobang Biological Medicine Co.,ltd. Address: 2 Floor, No 1 Facility Building, Xiangxiang Industrial Park,Yingrenshi Community, Shiyan Street, Baoan District, Shenzhen, Guangdong, China Product Name: Fatassy Smart Pet Feeder Model Number: FC-E02 FCC Identifier: 2A6OM-FC-E02 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: JIAO LI Date: 2024.02.19 Title: General Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 Shenzhen Haobang Biological Medicine Co.,ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024.02.1 9 Subject: Request for Confidentiality FCC ID: 2A6OM-FC -E02 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: JIAO LI Title: General Manager

ProjectNo.:18220WC400105Page 1 of 4 AppendixII--ExternalPhotograph ProjectNo.:18220WC400105Page 2 of 4 ProjectNo.:18220WC400105Page 3 of 4 ProjectNo.:18220WC400105Page 4 of 4

 Product Name: Fatassy Smart Pet Feeder Model No.: FC-E02 FCC ID: 2A6OM-FC-E02 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation 

ProjectNo.:18220WC400105Page 1 of 3 AppendixIII--InternalPhotograph ProjectNo.:18220WC400105Page 2 of 3 ANT ProjectNo.:18220WC400105Page 3 of 3

MAXIMUMPERMISSIBLEEXPOSURE KDB447498D01MobileandPortableDevicesRFExposureProceduresand EquipmentAuthorizationPoliciesv06. AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeused toevaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b) EUTSpecification FCCID2A6OM-FC-E02 EUTFatassySmartPetFeeder Frequencyband(Operating)BT:2.402GHz~2.480GH WLAN:2.412GHz~2.462GHz RLAN:5.180GHz~5.240GHz RLAN:5.260GHz~5.320GHz RLAN: 5.500 GHz~ 5.700 GHz RLAN:5.745GHz~5.825GHz Others: DevicecategoryPortable(<20cmseparation) Mobile(>20cmseparation) Others___ ExposureclassificationOccupational/Controlledexposure GeneralPopulation/Uncontrolledexposure AntennadiversitySingleantenna Multipleantennas Txdiversity Rxdiversity Tx/Rxdiversity Antennagain(Max)BLE:1.1dBi EvaluationappliedMPEEvaluation SAREvaluation LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) Power Density(mW/cm 2 ) AverageTime (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/150030 1500-100000----130 Friistransmissionformula:Pd=(Pout*G)\(4*pi*R2) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainMw G=gainofantennainlinearscale Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE.Ifweknowthemaximumgainoftheantennaandtotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancewheretheMPElimitis reached. MeasurementResult OperatingMode Maximum output power (dBm) Tuneup tolerance (dBm) Max.Tuneup Power (dBm) Antenna Gain (dBi) Power densityat 20cm (mW/cm 2 ) Power density Limits (mW/cm 2 ) BLE2.732.73±13.731.10.00061 Result:NoStandaloneSARtestisrequired.

R & D, productionand sales of professional wireless terminal antenna SPECIFICATION Customer Name： Product Model：NMM-PFB-W2 Customer P/N ： XINHENGYANG P/N： SPECIFFCATIONS:2400-2500MHz Production date：2023.04.26 Sample Version：V1.0 R & D, productionand sales of professionalwirelessterminalantenna Index Cover·············································1 Index············································2 Changehistory·····································3 The basicparameters································4 TestEquipment& Conditions ··························· 5 TestReport ····································· 6—8 RoHS/Billof materials······························9 R & D, productionand sales of professionalwirelessterminalantenna Changehistory Number EffectivedateChangerecord V1.02023.04.26 Initial release R & D, productionand sales of professionalwirelessterminalantenna The basicparameters A. ElectricalCharacteristics Frequency2400MHZ~2500MHZ VSWR< 2 AvgEfficiency>31% Impedance 50±15 Ohm PolarizationLinear PeakGain2.4G:1.10dBi B. Material& MechanicalCharacteristics Materialof Radiatoronboard / / / black CableType ConnectorType Dimension C. Environmental OperationTemperature StorageTemperature - 20 ̊C ~ + 60 ̊C - 30 ̊C ~ + 70 ̊C R & D, productionand sales of professional wireless terminal antenna Introduction: Microwavedarkroom andno reflectionchamber,absorbingshort wave darkroom dark room. Microwave darkroom by electromagnetic shielding room, filtering and isolation, grounding device, the ventilation duct, indoor distribution system, monitoring system, ceiling wave material part. It is based on the wave absorbing material as the lining of the shield room, it can absorb the most of the electromagnetic energy into the six wall is a better simulation of the free space conditions. The main working principle of microwave anechoic chamber is according to the electromagnetic wave in the medium from the low magnetic guide magnetic direction of propagation rules, absorbing materials to guide the electromagnetic wave using high permeability, through resonance, a substantial absorption of electromagnetic wave radiation energy, by coupling the electromagnetic energy into heat energy. main performance ： Frequency range:400MHz ~ 6GHz ceiling reflected wave loss materials: 400MHz ~ 6GHz is equal to or more than 15dB (microwave absorbing material by composite wave absorbing materials, namely tapered containing carbon sponge suction wave material paste in ferrite) R & D, productionand sales of professional wireless terminal antenna Test Report Those specifications were specially defined forNMM-PFB-W2model. 1.Antenna position VSWR 2.Measuring Method 1.A50Ωcoaxial cable is connected to the antenna. Then this cable is connected to a network analyzer to measure the VSWR 2.Keeping this jig away from metal at least 20cm R & D, productionand sales of professional wireless terminal antenna 3.Measurement frequency points and VSWR value 4.Gain table ofAntenna: 24 50MHz 2450MHz2450MHz R & D, productionand sales of professionalwirelessterminalantenna RoHS/Billof materials 1.RoHS Antenna meets RoHS requirementsSee electronicfile for details. ***************************END****************************

ReportNo.:18220WC40010501FCCID:2A6OM-FC-E02Page1of30 FCCTestReport Applicant:ShenzhenHaobangBiologicalMedicineCo.,ltd. Address: 2Floor,No1FacilityBuilding,Xiangxiang IndustrialPark,YingrenshiCommunity,Shiyan Street,BaoanDistrict,Shenzhen,Guangdong, China ProductName:FatassySmartPetFeeder ReportDate:Feb.05,2024 ShenzhenAnbotekComplianceLaboratoryLimited ReportNo.:18220WC40010501FCCID:2A6OM-FC-E02Page2of30 Contents 1.GeneralInformation.................................................................................................................................6 1.1.ClientInformation...........................................................................................................................6 1.2.DescriptionofDevice(EUT)..........................................................................................................6 1.3.AuxiliaryEquipmentUsedDuringTest..........................................................................................7 1.4.Operationchannellist....................................................................................................................7 1.5.DescriptionofTestModes.............................................................................................................7 1.6.MeasurementUncertainty.............................................................................................................8 1.7.TestSummary................................................................................................................................8 1.8.DescriptionofTestFacility.............................................................................................................9 1.9.Disclaimer......................................................................................................................................9 1.10.TestEquipmentList...................................................................................................................10 2.Antennarequirement..............................................................................................................................12 2.1.Conclusion...................................................................................................................................12 3.ConductedEmissionatACpowerline..................................................................................................13 3.1.EUTOperation.............................................................................................................................13 3.2.TestSetup....................................................................................................................................13 3.3.TestData......................................................................................................................................14 4.OccupiedBandwidth..............................................................................................................................16 4.1.EUTOperation.............................................................................................................................16 4.2.TestSetup....................................................................................................................................16 4.3.TestData......................................................................................................................................16 5.MaximumConductedOutputPower......................................................................................................17 5.1.EUTOperation.............................................................................................................................17 5.2.TestSetup....................................................................................................................................17 5.3.TestData......................................................................................................................................17 6.PowerSpectralDensity..........................................................................................................................18 6.1.EUTOperation.............................................................................................................................18 6.2.TestSetup....................................................................................................................................18 6.3.TestData......................................................................................................................................18 7.Emissionsinnon-restrictedfrequencybands.......................................................................................19 7.1.EUTOperation.............................................................................................................................19 7.2.TestSetup....................................................................................................................................19 7.3.TestData......................................................................................................................................19 8.Bandedgeemissions(Radiated)..........................................................................................................20 8.1.EUTOperation.............................................................................................................................20 8.2.TestSetup....................................................................................................................................20 8.3.TestData......................................................................................................................................21 9.Emissionsinfrequencybands(below1GHz).......................................................................................22 9.1.EUTOperation.................................................................................................................…

Text truncated - open the document above for the full version.

Page1of17 AppendixTestData ReportNo.:18220WC40010501TestSampleNo.:1-2-2 StartTestDate: 2024.1.24 FinishTestDate:2024.1.25 TestEngineer:Auditor: Temperature:25.3 °C RelativeHumidity:47% Pressure:101kPa AppendixA:DTSBandwidth TestResult TestModeAntennaFrequency[MHz] DTSBW [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict BLE_1MAnt1 24020.6722401.6682402.3400.5PASS 24400.6922439.6522440.3440.5PASS 24800.6842479.6562480.3400.5PASS TestGraphs BLE_1M_Ant1_2402 Page2of17 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page3of17 AppendixB:OccupiedChannelBandwidth TestResult TestModeAntennaFrequency[MHz] OCB[MHz] FL[MHz]FH[MHz] BLE_1MAnt1 24021.03472401.49382402.5285 24401.02602439.49722440.5232 24801.02852479.49592480.5244 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page4of17 Page5of17 AppendixC:Maximumconductedoutputpower TestResultPeak TestModeAntennaFrequency[MHz] ConductedPeak Power[dBm] Conducted Limit[dBm] Verdict BLE_1MAnt1 24022.73≤30PASS 24402.66≤30PASS 24801.9≤30PASS TestGraphsPeak BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 Page6of17 BLE_1M_Ant1_2480 Page7of17 AppendixD:Maximumpowerspectraldensity TestResult TestModeAntennaFrequency[MHz]Result[dBm/3kHz]Limit[dBm/3kHz]Verdict BLE_1MAnt1 2402-12.12≤8.00PASS 2440-12.41≤8.00PASS 2480-13.19≤8.00PASS TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 Page8of17 BLE_1M_Ant1_2480 Page9of17 AppendixE:Bandedgemeasurements TestResult TestMod e Antenn a ChNam e Frequency[MHz ] RefLevel[dBm ] Result[dBm ] Limit[dBm ] Verdic t BLE_1MAnt1 Low24021.93-56.69≤-18.08PASS High24801.11-57.92≤-18.89PASS TestGraphs BLE_1M_Ant1_Low_2402 BLE_1M_Ant1_High_2480 Page10of17 AppendixF:ConductedSpuriousEmission TestResult TestMod e Antenn a Frequency[MHz ] FreqRange [MHz] RefLeve l [dBm] Result[dBm ] Limit[dBm ] Verdic t BLE_1MAnt1 2402 Reference1.911.91---PASS 30~10001.91-68.76≤-18.09PASS 1000~2650 0 1.91-53.72≤-18.09PASS 2440 Reference1.531.53---PASS 30~10001.53-69.5≤-18.47PASS 1000~2650 0 1.53-53.03≤-18.47PASS 2480 Reference0.990.99---PASS 30~10000.99-69.27≤-19.01PASS 1000~2650 0 0.99-52.8≤-19.01PASS Page11of17 TestGraphs BLE_1M_Ant1_2402_0~Reference BLE_1M_Ant1_2402_30~1000 BLE_1M_Ant1_2402_1000~26500 Page12of17 BLE_1M_Ant1_2440_0~Reference BLE_1M_Ant1_2440_30~1000 Page13of17 BLE_1M_Ant1_2440_1000~26500 BLE_1M_Ant1_2480_0~Reference Page14of17 BLE_1M_Ant1_2480_30~1000 BLE_1M_Ant1_2480_1000~26500 Page15of17 Page16of17 AppendixG:DutyCycle TestResult TestModeAntennaFrequency[MHz] ONTime [ms] Period [ms] DutyCycle [%] DutyCycle Factor[dB] BLE_1MAnt1 24020.380.6360.322.20 24400.380.6360.322.20 24800.380.6261.292.13 TestGraphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 Page17of17 BLE_1M_Ant1_2480 ---END---

ProjectNo.:18220WC400105Page 1 of 2 AppendixI--TestSetupPhotograph_RF ConductedEmissionatACpowerline Emissionsinfrequencybands(below1GHz) ProjectNo.:18220WC400105Page 2 of 2 Emissionsinfrequencybands(above1GHz)