2A6OO-SA200Projector Light

FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

SHENZHENBETTERLIFEPHOTOELECTRICTECHNOLOGYCO.,LTD. 2.911(d)(5)(i)EquipmentTypeAttestationv1.2 Section2.911(d)(5)(i)Certification–EquipmentType Companyname:SHENZHENBETTERLIFEPHOTOELECTRICTECHNOLOGYCO.,LTD. Address:2ndFloor,BuildingC,ShitoushanIndustrialZone,ZhoushiRoad,ShiyanTown,Baoan District,Shenzhen,Guangdong,China. ProductName:ProjectorLight FCCID:2A6OO-SA200 Model(s):SA200,SA201,SA202,SA203,SA204,SA205,SA206,SA207,SA208,SA209,SA200G, SA201G,SA202G,SA203G,SA204G,SA205G,SA206G,SA207G,SA208G,SA209G,SA200B, SA201B,SA202B,SA203B,SA204B,SA205B,SA206B,SA207B,SA208B,SA209B,SA200Y, SA201Y,SA202Y,SA203Y,SA204Y,SA205Y,SA206Y,SA207Y,SA208Y,SA209Y 2.911(d)(5)(i)EquipmentType We,[SHENZHENBETTERLIFEPHOTOELECTRICTECHNOLOGYCO.,LTD.](“theapplicant”) certifythattheequipmentforwhichauthorizationissoughtthroughcertificationisnot:  Prohibitedfromreceivinganequipmentauthorizationpursuantto§2.903;oftheFCCrules.  Identifiedasanequipmenttypeinthe“CoveredList” NOTE1 Yourssincerely, Name:XuPengLuDate:2024.1.8 TitleandCompanyname:Manager/SHENZHENBETTERLIFEPHOTOELECTRICTECHNOLOGY CO.,LTD. NOTE1 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

SHENZHENBETTERLIFEPHOTOELECTRICTECHNOLOGYCO.,LTD. 2.911(d)(5)(ii)ApplicantAttestationv1.3 Section2.911(d)(5)(ii)Certification–Applicant(CoveredList) Companyname:SHENZHENBETTERLIFEPHOTOELECTRICTECHNOLOGYCO.,LTD. Address:2ndFloor,BuildingC,ShitoushanIndustrialZone,ZhoushiRoad,ShiyanTown,Baoan District,Shenzhen,Guangdong,China. ProductName:ProjectorLight FCCID:2A6OO-SA200 Model(s):SA200,SA201,SA202,SA203,SA204,SA205,SA206,SA207,SA208,SA209,SA200G, SA201G,SA202G,SA203G,SA204G,SA205G,SA206G,SA207G,SA208G,SA209G,SA200B, SA201B,SA202B,SA203B,SA204B,SA205B,SA206B,SA207B,SA208B,SA209B,SA200Y, SA201Y,SA202Y,SA203Y,SA204Y,SA205Y,SA206Y,SA207Y,SA208Y,SA209Y 2.911(d)(5)(ii)Applicantfiling We,[SHENZHENBETTERLIFEPHOTOELECTRICTECHNOLOGYCO.,LTD.](“theapplicant”) certifythat,asofthedateofthefilingoftheapplication,theapplicantisnotidentified NOTE1 onthe “CoveredList” NOTE2 ,establishedpursuantto§1.50002ofthischapter,asanentityproducing coveredcommunicationsequipment. Yourssincerely, Name:XuPengLuDate:2024.1.8 TitleandCompanyname:Manager/SHENZHENBETTERLIFEPHOTOELECTRICTECHNOLOGY CO.,LTD. NOTE1 Deleteoptionnotapplicabletothisapplication. NOTE2 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

SHENZHENBETTERLIFEPHOTOELECTRIC TECHNOLOGYCO.,LTD. 2.911(d)(7)USAAgentv1.5 Section2.911(d)(7)USAAgentforServiceofProcess Companyname:SHENZHENBETTERLIFEPHOTOELECTRICTECHNOLOGY CO.,LTD. Address:2ndFloor,BuildingC,ShitoushanIndustrialZone,ZhoushiRoad,Shiyan Town,BaoanDistrict,Shenzhen,Guangdong,China. ProductName:ProjectorLight FCCID:2A6OO-SA200 Model(s):SA200,SA201,SA202,SA203,SA204,SA205,SA206,SA207,SA208, SA209,SA200G,SA201G,SA202G,SA203G,SA204G,SA205G,SA206G,SA207G, SA208G,SA209G,SA200B,SA201B,SA202B,SA203B,SA204B,SA205B,SA206B, SA207B,SA208B,SA209B,SA200Y,SA201Y,SA202Y,SA203Y,SA204Y,SA205Y, SA206Y,SA207Y,SA208Y,SA209Y 2.911(d)(7)USADesignatedAgentforServiceofProcess We,[SHENZHENBETTERLIFEPHOTOELECTRICTECHNOLOGYCO.,LTD.](“the applicant”)designate[StoneTradingLimited] NOTE1 forthepurposeofacceptingservice ofprocessonbehalfoftheapplicant. Applicantconsent:Weacknowledgeourconsenttoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipment,andatthephysicalU.S. addressandemailaddressofthedesignatedagentandacknowledgeour acceptanceofourobligationtomaintainanagentforserviceofprocessintheUnited Statesfornolessthanoneyearaftereitherwethegranteehavepermanently terminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S., orattheconclusionofanyCommission-relatedadministrativeorjudicialproceeding involvingtheequipment,whicheverislater. Agentobligation:Weacknowledgeourobligationtoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipmentatourphysicalU.S. addressandemailaddressfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipment withintheU.S.,orattheconclusionofanyCommission-relatedadministrativeor judicialproceedinginvolvingtheequipment,whicheverislater. USAAgent Companyname:StoneTradingLimited USAAddress:6547NAcademyBlvd #2266,ColoradoSprings,CO80918,United States FRNNumber:0033401936 ContactName:DongmeiFang Applicant Companyname:SHENZHEN BETTERLIFEPHOTOELECTRIC TECHNOLOGYCO.,LTD. Address:2ndFloor,Building C,ShitoushanIndustrialZone,Zhoushi Road,ShiyanTown,BaoanDistrict, Shenzhen,Guangdong,China. SHENZHENBETTERLIFEPHOTOELECTRIC TECHNOLOGYCO.,LTD. 2.911(d)(7)USAAgentv1.5 TelephoneNo:+12134573118 Email:[email protected] GranteeFRNNumber:0032327165 FCCGranteeCode:2A6OO ContactName:XuPengLu TelephoneNo:0755-27192384 Email:[email protected] Signature: Title:manager Signature: Title:Manager Date:2024.1.25Date:2024.1.25 NOTE1:AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforservice ofprocess. Reference;FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

SHENZHENBETTERLIFEPHOTOELECTRICTECHNOLOGYCO.,LTD. AgentAuthorization Company:SHENZHENBETTERLIFEPHOTOELECTRICTECHNOLOGYCO.,LTD. Address:2ndFloor,BuildingC,ShitoushanIndustrialZone,ZhoushiRoad,Shiyan Town,BaoanDistrict,Shenzhen,Guangdong,China. ProductName:ProjectorLight ModelNumber(s):SA200,SA201,SA202,SA203,SA204,SA205,SA206,SA207, SA208,SA209,SA200G,SA201G,SA202G,SA203G,SA204G,SA205G,SA206G, SA207G,SA208G,SA209G,SA200B,SA201B,SA202B,SA203B,SA204B,SA205B, SA206B,SA207B,SA208B,SA209B,SA200Y,SA201Y,SA202Y,SA203Y,SA204Y, SA205Y,SA206Y,SA207Y,SA208Y,SA209Y ProductDescription:ProjectorLight WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown. Signature:Date:2024.1.8 Name:XuPengLu Title:Manager Company:SHENZHENBETTERLIFEPHOTOELECTRICTECHNOLOGYCO.,LTD.

SHENZHEN BETTERLIFE PHOTOELECTRIC TECHNOLOGY CO.,LTD. Model Difference Product description: Projector Light Model name: SA200, SA201, SA202, SA203, SA204, SA205, SA206, SA207, SA208, SA209, SA200G, SA201G, SA202G, SA203G, SA204G, SA205G, SA206G, SA207G, SA208G, SA209G, SA200B, SA201B, SA202B, SA203B, SA204B, SA205B, SA206B, SA207B, SA208B, SA209B, SA200Y, SA201Y, SA202Y, SA203Y, SA204Y, SA205Y, SA206Y, SA207Y, SA208Y, SA209Y FCC ID:2A6OO-SA200 Trade Name: N/A Only the model name is different. Regards Sincerely Client’s signature: Client’s name / title: XuPeng Lu / Manager Contact information / address: 2nd Floor, Building C,Shitoushan Industrial Zone, Zhoushi Road, Shiyan Town,Baoan District, Shenzhen, Guangdong, China.

SHENZHENBETTERLIFEPHOTOELECTRICTECHNOLOGYCO.,LTD. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:2024.1.8 Subject;RequestforConfidentiality FCCID:2A6OO-SA200 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:XuPengLu Title:Manager

EUT PHOTO(External Photos)

Label & label location 20mm*10mm FCC ID:2A6OO-SA200 Label location

EUT PHOTO(Internal Photos) ※※※※※ END OF REPORT ※※※※※ ANT

FCC ID:2A6OO-SA200 RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093， Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f (GHz) ] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f (GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, For 433.92MHz Frequency (MHz) Electric Field (dBuV/m) Power to antenna (dBm) Power to antenna (mW) Min. distance(mm) Calc. thresholds limit 433.92 73.07 -22.13 0.01 5 0.00132 3.0 Remark: dBuV/m to dBm , dBm = dBuV/m - 95.2 ; So a SAR test is not required

SHENZHEN BETTERLIFE PHOTOELECTRIC TECHNOLOGY CO.,LTD. SHENZHEN BETTERLIFE PHOTOELECTRIC TECHNOLOGY CO.,LTD. Address: 2nd Floor, Building C,Shitoushan Industrial Zone, Zhoushi Road, Shiyan Town,Baoan District, Shenzhen, Guangdong, China. Material specification specifications： SA200 manufacturer:Shenzhen JLC Electronics Co., Ltd. Address: 27th Floor,Olympic Building,NO.2 ShangbaoRoad,Futian District,Shenzhen City,Guangdong Province,P.R.China 1. Type: PCB on-board antenna 2. Features 1.*Stable and reliable in performances 2.*RoHS compliance 3. Antenna Dimensions (unit: mm) 30.40m m 31.56mm 41.68mm 1.05mm SHENZHEN BETTERLIFE PHOTOELECTRIC TECHNOLOGY CO.,LTD. 5. Antenna Picture

Project No.: ZKT-2312139895E Page 1 of 30 FCC TEST REPORT FCC ID:2A6OO-SA200 Report Number. .............................. : ZKT-2312139895E Date of Test ................................................. : Dec. 13, 2023 to Dec. 25, 2023 Date of issue .................................... : Dec. 25, 2023 Total number of pages ...................... 30 Test Result ..................................... : PASS Testing Laboratory. ........................ : Shenzhen ZKT Technology Co., Ltd. Address .......................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name ......................... : SHENZHEN BETTERLIFE PHOTOELECTRIC TECHNOLOGY CO.,LTD. Address .......................................... : 2nd Floor, Building C,Shitoushan Industrial Zone, Zhoushi Road, Shiyan Town,Baoan District, Shenzhen, Guangdong, China. Manufacturer's name ................... : SHENZHEN BETTERLIFE PHOTOELECTRIC TECHNOLOGY CO.,LTD. Address .......................................... : 2nd Floor, Building C,Shitoushan Industrial Zone, Zhoushi Road, Shiyan Town,Baoan District, Shenzhen, Guangdong, China. Test specification: Standard ........................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.231 ANSI C63.10:2013 Test procedure ................................. : / Non-standard test method ............. : N/A Test Report Form No. .................... : / Test Report Form(s) Originator .... : ZKT Testing Master TRF .................................... : Dated: 2020-01-06 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the IC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name ................................. : Projector Light Trademark ...................................... : N/A Model/Type reference ...................... : SA200 (Please refer to Section 3.1 for adding models.) Project No.: ZKT-2312139895E Page 2 of 30 Testing procedure and testing location: Testing Laboratory ................................... : Shenzhen ZKT Technology Co., Ltd. Address ...................................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Jim Liu Tested by (name + signature) .................... : Jeff Fu Reviewer (name + signature) ..................... : Lake Xie Approved (name + signature) .................... : Project No.: ZKT-2312139895E Page 3 of 30 Table of Contents Page 1. VERSION ................................................................................................................... 5 2. SUMMARY OF TEST RESULTS ................................................................................ 6 2.1 TEST FACILITY .............................................................................................................. 7 2.2 MEASUREMENT UNCERTAINTY .................................................................................. 7 3. GENERAL INFORMATION ........................................................................................ 8 3.1 GENERAL DESCRIPTION OF EUT ............................................................................... 8 3.2 DESCRIPTION OF TEST MODES .................................................................................. 9 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED ............. 9 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) ....................................... 9 3.5 EQUIPMENTS LIST FOR ALL TEST ITEMS ................................................................ 10 4. EMC EMISSION TEST ............................................................................................. 10 4.1 CONDUCTED EMISSION MEASUREMENT ................................................................ 12 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS ................................................ 12 4.1.2 TEST PROCEDURE ............................................................................................. 13 4.1.3 DEVIATION FROM TEST STANDARD ................................................................ 13 4.1.4 TEST SETUP ........................................................................................................ 13 4.1.5 EUT OPERATING CONDITIONS ......................................................................... 13 4.1.6 TEST RESULTS .................................................................................................... 13 4.2 RADIATED EMISSION MEASUREMENT ..................................................................... 14 4.2.1 RADIATED EMISSION LIMITS ............................................................................. 14 4.2.2 TEST PROCEDURE ............................................................................................. 15 4.2.3 TEST SETUP ........................................................................................................ 16 4.2.4 EUT OPERATING CONDITIONS ......................................................................... 17 4.2.5 TEST RESULTS .................................................................................................... 18 5.1 APPLIED PROCEDURES / LIMIT ........................................................................... 23 5.2 TEST PROCEDURE ................................................................................................ 23 5.3 DEVIATION FROM STANDARD ............................................................................. 23 5.4 TEST SETUP ......................................................................................................…

Text truncated - open the document above for the full version.

EUT TEST PHOTO