2A6SF-FDWireless dual force platforms to analyse balance, strength and movement strategies in a range of exercises and jumps.

ForceDecks Instruction Manual for FDMax, FDLite (v.2), and FDMIni Version 1.0 2022 VALD ForceDecks Instruction Manual v.1.2022 2 Contents 1 Important Notice ........................................................................................................ 3 1.1 F.C.C. Notification ........................................................................................................................ 3 2 Introduction ................................................................................................................ 4 3 Welcome to ForceDecks ............................................................................................. 4 4 Getting Started: ForceDecks Hardware ....................................................................... 5 4.1 ForceDecks Components ............................................................................................................ 5 4.2 ForceDecks Setup ........................................................................................................................ 6 4.3 Floor Considerations ................................................................................................................... 6 4.4 Space Considerations ................................................................................................................. 6 4.4.1 Preventing Crosstalk ......................................................................................................................... 6 4.5 Cable configuration ..................................................................................................................... 6 4.6 Battery .......................................................................................................................................... 7 4.6.1 Charging ForceDecks ........................................................................................................................ 8 4.6.2 Battery Status .................................................................................................................................... 8 4.7 Turn On and Off............................................................................................................................ 8 5 Getting Started: ForceDecks Software ........................................................................ 9 5.1 Setup Your Software .................................................................................................................. 10 5.2 Minimum Device Requirements ................................................................................................ 10 5.3 Bluetooth Connection ................................................................................................................ 11 6 Using ForceDecks ..................................................................................................... 11 7 Safety, Care and Maintenance .................................................................................. 11 VALD ForceDecks Instruction Manual v.1.2022 3 1 Important Notice 1.1 F.C.C. Notification Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC‘s RF radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. VALD ForceDecks Instruction Manual v.1.2022 4 2 Introduction This document provides information about the installation and use of the FDMax, FDLIte (v.2), and FDMini ForceDecks systems, including the assembly of hardware and installation of software. 3 Welcome to ForceDecks ForceDecks are a dual force plate and auto-analysis system, used to analyse an individual’s balance, strength and movement strategies in a range of exercises and jumps. The collection of ForceDecks data is about measuring different muscle characteristics, in controlled situations. Whether a practitioner needs to assess or treat: • Musculoskeletal; • Neurological; • Orthopaedic; • Geriatric; • Performance; or • Sports conditions, they can use ForceDecks to: • Collect baseline data; • Monitor rehabilitation progress; • Monitor injury risk; and • Improve performance. Previously, force plates were limited to laboratories and elite sporting teams and involved a time- consuming and complex process to analyse the data collected. With the ForceDecks portable force plates and suite of software, practitioners are able to collect force plate data on the road and see auto-analysed results in real-time. Practitioners can then use ForceDecks results to make decisions on an individual’s training, performance, readiness, or rehabilitation, among other applicatio…

Text truncated - open the document above for the full version.

Date: 3 June 2022 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Regarding: FCC ID 2A6SF-FD. To whom it may concern: We, the undersigned, hereby authorize SGS Hong Kong Limited and YW Yung in SGS Hong Kong Limited to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID’s above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with VALD Pty Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Samuel James Title: Director and Chief Strategy Officer Signature: On behalf of Company: VALD Pty Ltd. Telephone: +61 405 282 030

To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: VALD Pty Ltd 115 Breakfast Creek Road Newstead QLD 4006 Australia Regarding: Confidentiality Request regarding application for FCC ID 2A6SF-FD LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematics Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Samuel James Director and Chief Strategy Officer VALD Pty Ltd 3 June 2022

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name VALD Pty Ltd Address 115 Breakfast Creek Road, Newstead, QLD, 4006, Australia Grantee Code 2A6SF FCC ID 2A6SF-FD Authorized Contact Name Samuel James Contact Email [email protected] Contact Phone +61 405 282 030 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 3 June 2022 Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Print Name: Samuel Jones Title: Chief Strategy Officer

Statement We, VALD Pty Ltd, declare that our product, ForceDecks, which with below model/item No’s.: ForceDecks Mini (FDMini), ForceDecks Lite (FDLite), ForceDecks Max (FDMax), are identical in circuitry design, PCB layout, electrical components used, internal wiring and functions, only differ in decoration, and battery. The differences refer to the table below: FDMax + FD Lite FD Mini Battery Meinovo 186502P1S 5.2Ah Li-Ion battery pack with thermistor Meinovo SJYPN525060 2.0Ah Li-Ion battery pack with thermistor Signed by VALD Pty Ltd in accordance with section 127 of the Corporations Act 2001 (Cth) by a director and secretary/director on 3 June 2022: Signature of director Signature of secretary/director Samuel Thomas James Timothy Wilkins Name of director (please print) Name of secretary/director (please print)

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Appendix A Photographs of EUT Constructional Details for HKEM2202000224AT Appendix A: External Photo of HKEM2202000224AT

Certification Sticker Location NOTE* Location of certification sticker is consistent for all ForceDecks Models Plate Out FCC ID: XXXYYYYYY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. MADE IN AUSTRALIA IC: XXXXYYYYYYY HVIN: XXXXXX Model FDLite Serial No. FDL-2- XXXX Side view Top view Bottom view Stickers located on Right hand Side of ForceDecks Plate Out This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2A6SF-FD Model: FDLite Serial No.: FDL-2- XXXX Designed and made in Australia by Plate Out This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2A6SF-FD Model: FDMax Serial No.: FD4-2- XXXX Designed and made in Australia by This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Serial No.: FDM - XXXX Plate Out FCC ID: 2A6SF-FD Model: Designed and made in Australia by FDMini

Appendix B: Internal Photo of HKEM2202000224AT

Report No.: HKEM220200022403 Page: 1 of 10 Law Man Kit EMC Manager This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request and accessible at http://www.sgs.com/en/Terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. T he document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. TEST REPORT Application No.: HKEM2202000224AT Applicant: VALD Pty Ltd Address of Applicant: 115 Breakfast Creek Rd. Newstead QLD 4006, Australia Equipment Under Test (EUT): EUT Name: ForceDecks Dual Force Plate System Model No.: FDMini, FDLite, FDMax Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: ForceDecks FCC ID: 2A6SF-FD Standard(s) : 47 CFR Part 1.1307, Part 1.1310 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2022-02-25 Date of Test: 2022-02-22 to 2022-03-15 Date of Issue: 2022-03-20 Test Result: In the configuration tested, the EUT complied with the standards specified above. Report No.: HKEM220200022403 Page: 2 of 10 Revision Record Version Chapter Date Modifier Remark 01 2022-03-20 Original Authorized for issue by: Panny Leung /Project Engineer Date: 2022-03-20 Law Man Kit /Reviewer Date: 2022-03-20 Report No.: HKEM220200022403 Page: 3 of 10 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result RF Exposure 47 CFR Part 1.1307, Part 1.1310 CFR 47 Part 1.1310 CFR 47 Part 1.1310 Pass Declaration of EUT Family Grouping: Item no.: FDMini, FDLite, FDMax According to the confirmation from the applicant, the above models are identical in circuitry design, PCB layout, electrical components used, internal wiring and functions, only differ in decoration, and battery. FDMax + FD Lite FD Mini Meinovo 186502P1S 5.2Ah Li-Ion battery pack with thermistor Meinovo SJYPN525060 2.0Ah Li-Ion battery pack with thermistor Therefore, only the model FDMini was tested in this report. Abbreviation: Tx: In this whole report Tx (or tx) means Transmitter. Rx: In this whole report Rx (or rx) means Receiver. RF: In this whole report RF means Radiated Frequency. CH: In this whole report CH means channel. Volt: In this whole report Volt means Voltage. Temp: In this whole report Temp means Temperature. Humid: In this whole report Humid means humidity. Press: In this whole report Press means Pressure. N/A: In this whole report not application. Report No.: HKEM220200022403 Page: 4 of 10 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 5 4.1 D ETAILS OF E.U.T. ......................................................................................................................... 5 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 5 4.3 M ODULATION CONFIGURE ................................................................................................................ 6 4.4 M EASUREMENT UNCERTAINTY ......................................................................................................... 6 4.5 TEST LOCATION ............................................................................................................................. 7 4.6 T EST FACILITY ............................................................................................................................... 7 4.7 DEVIATION FROM STANDARDS ......................................................................................................... 7 4.8 A BNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 7 5 EQUIPMENT LIST ............................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................. 9 6.1 RF EXPOSURE ............................................................................................................................... 9 6.1.1 Test Requirement: ................................................................................................................... 9 6.1.2 Conclusion ............................................................................................................................... 9 7 PHOTOGRAPHS ...............................................................................................…

Text truncated - open the document above for the full version.

Report No.: HKEM220200022402 Page: 1 of 48 Law Man Kit EMC Manager This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request and accessible at http://www.sgs.com/en/Terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. T he document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. TEST REPORT Application No.: HKEM2202000224AT Applicant: VALD Pty Ltd Address of Applicant: 115 Breakfast Creek Rd. Newstead QLD 4006, Australia Equipment Under Test (EUT): EUT Name: ForceDecks Dual Force Plate System Model No.: FDMini, FDLite, FDMax Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: ForceDecks FCC ID: 2A6SF-FD Standard(s) : CFR 47 FCC Part 15, Subpart C Date of Receipt: 2022-02-25 Date of Test: 2022-02-22 to 2022-03-15 Date of Issue: 2022-03-20 Test Result: In the configuration tested, the EUT complied with the standards specified above. Report No.: HKEM220200022402 Page: 2 of 48 Revision Record Version Chapter Date Modifier Remark 01 2022-03-20 Original Authorized for issue by: Panny Leung /Project Engineer Date: 2022-03-20 Law Man Kit /Reviewer Date: 2022-03-20 Report No.: HKEM220200022402 Page: 3 of 48 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Disturbance at AC Power Line(150kHz-30MHz) 47 CFR Part 15, Subpart C 15.207 ANSI C63.10: 2013 Section 6.2 47 CFR FCC Part 15, Subpart C 15.207 Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Declaration of EUT Family Grouping: Item no.: FDMini, FDLite, FDMax According to the confirmation from the applicant, the above models are identical in circuitry design, PCB layout, electrical components used, internal wiring and functions, only differ in decoration, and battery. FDMax + FD Lite FD Mini Meinovo 186502P1S 5.2Ah Li-Ion battery pack with thermistor Meinovo SJYPN525060 2.0Ah Li-Ion battery pack with thermistor Therefore, only the model FDMini was tested in this report. Report No.: HKEM220200022402 Page: 4 of 48 Abbreviation: Tx: In this whole report Tx (or tx) means Transmitter. Rx: In this whole report Rx (or rx) means Receiver. RF: In this whole report RF means Radiated Frequency. CH: In this whole report CH means channel. Volt: In this whole report Volt means Voltage. Temp: In this whole report Temp means Temperature. Humid: In this whole report Humid means humidity. Press: In this whole report Press means Pressure. N/A: In this whole report not application. Report No.: HKEM220200022402 Page: 5 of 48 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 5 4 GENERAL INFORMATION .................................................................................................................. 7 4.1 D ETAILS OF E.U.T. ......................................................................................................................... 7 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 8 4.3 M ODULATION CONFIGURE ................................................................................................................ 9 4.4 M EASUREMENT UNCERTAINTY ......................................................................................................... 9 4.5 TEST LOCATION ................................................................................................................…

Text truncated - open the document above for the full version.

Appendix C: Setup Photo of HKEM2202000224AT Conducted Emissions at Mains Terminals (150kHz-30MHz) Test Setup Radiated Emissions (30MHz-1GHz) Test Setup Radiated Emissions (Above 1GHz) Test Setup Conducted RF Output Power Test Setup