2A6SFDMPDynaMo

DynaMo Range User Manual v0.3 February 2026 VALD DynaMo Health and Safety Manual 2 Contents 1 Introduction ........................................................................................................................ 3 1.1 Product Overview .............................................................................................................................. 3 2 Device Specifications ......................................................................................................... 4 2.1 Operational Description.................................................................................................................... 4 2.2 DynaMo Lite ....................................................................................................................................... 4 2.3 DynaMo Plus ..................................................................................................................................... 8 2.4 DynaMo Max ................................................................................................................................... 12 3 Usage & Safety ................................................................................................................. 16 3.1 Regulatory Statements .................................................................................................................. 16 VALD DynaMo Range User Manual 3 1 Introduction This manual provides important context to help you use your DynaMo device safely and responsibly, and to support accurate and effective testing. It will give you essential information for proper operation, handling, care and additional regulatory guidance. For further information or assistance, please contact: www.vald.com | [email protected] VALD Pty Ltd 115 Breakfast Creek Road, Newstead, Queensland 4006 AUSTRALIA 1.1 Product Overview DynaMo Lite → Compression dynamometer and inclinometer → Fits in palm of hand or in pocket → Wearable via Velcro limb wraps DynaMo Plus → Tension/compression dynamometer and inclinometer → Inbuilt OLED screen → Range of Smart Attachments DynaMo Max → Tension/compression dynamometer and inclinometer → Dedicated rig available for IMTP/Belt Squat → Highest load capacity and sampling rates VALD DynaMo Health and Safety Manual 4 2 Device Specifications 2.1 Operational Description The DynaMo is a wireless, battery-powered handheld measurement tool designed to assess compressive and/or tensive isometric strength, as well as range of motion. It integrates a precision load cell for force measurement, and an inertial measurement unit (IMU) for capturing movement data. Measurement results are transmitted via an integrated Bluetooth Low Energy (BLE) module to companion software for analysis, visualization, and storage. All DynaMo devices include a USB-C port for charging the internal lithium-ion battery, along with the power button and an indicator LED. The DynaMo Plus also features a screen for on-device measurement feedback and tracking. Each DynaMo model has a range of attachments that enable unique testing configurations. 2.2 DynaMo Lite Interface (1) Multicolored LED (2) USB-C charging port (3) Power button → Hold to turn device on → Hold to turn device off VALD DynaMo Range User Manual 5 Attachments and Expansions Silicon pouch Limb wraps (3) → Small: 30 cm → Medium: 50 cm → Large: 80 cm Strength strap Travel case Technical Specifications H A R D W A R E D I M E N S I O N S U N I T E X C L U D I N G A T T A C H M E N T S Size 95 mm L x 73 mm W x 42 mm H / 3.7” L x 2.8” W x 1.6” H Weight 250 g / 0.55 lb I N T R A V E L C A S E I N C L U D I N G A T T A C H M E N T S Size 380 mm L x 380 mm W x 78 mm H / 14.9” L x 14.9” W x 3” H Weight 1.1 kg / 2.42 lb VALD DynaMo Health and Safety Manual 6 S E N S O R S P E C I F I C A T I O N S F O R C E S E N S O R S P E C I F I C A T I O N S Sensor type Load cell Max sampling rate 225 Hz Capacity 1,000 N / 100 kg / 220 lb compression Resolution 1 N Accuracy +/- 1% M O V E M E N T S E N S O R S P E C I F I C A T I O N S Sensor type 9-Axis Inertial Measuring Unit (IMU): Accelerometer, Gyroscope and Magnetometer Max sampling rate 225 Hz Resolution 1 degree Accuracy +/- 3 degrees E L E C T R O N I C S P E C I F I C A T I O N S P O W E R Battery Inbuilt 3.7 V 1,000 mA single-cell lithium-ion battery (non-replaceable) Battery life 10 hours active use (approx.) Charging method USB-C cable (supplied) Charging requirements USB 5 V d.c., 200 mA (1 W) minimum, IEC 62368-1 compliant WARNING: The DynaMo should not be operated while charging is in progress. W I R E L E S S D E T A I L S Connectivity Bluetooth Low Energy 5.1 Frequency 2402 – 2480 MHz Channels 2 MHz bandwidth, 40 BLE channels with frequency hopping Modulation GFSK EIRP Max 7.38 dBm O P E R A T I N G C O N D I T I O N S Temperature -10 °C – +40 °C Humidity 30% – 75% Pressure 70 kPa – 106 kPa CAUTION: The surface of the DynaMo may exceed 41°C when operating at maximum ambient temperature. VALD DynaMo Range User Manual 7 T R A N S P O R T C O N D I T I O N S Temperature -40 °C – +70 °C Humidity 10% – 100% Pressure 50 kPa – 106 kPa CAUTION: Observe the storage conditions and never store the DynaMo in an automobile except when transporting. S O F T W A R E R E Q U I R E M E N T S iOS Compatible devices All iOS mobile phones and tablets purchased after July 2017 Operating system Minimum requirement – iOS 11 A N D R O I D Compatible devices All Android mobile phones and tablets purchased after July 2014 Operating system Minimum requirement – Android 5 A T T A C H M E N T S Attachments Silicone Pouch, 3 x Adjustable Sleeves (Small/ Medium/ Large), Strength Strap, Charging Cable, Carry Case VALD DynaMo Health and Safety Manual 8 2.3 DynaMo Plus Interface (1) Multicolored LED (2) USB-C charging port (3) Power button → Hold to turn device on → Hold to turn device off (4) Zero button → Press during testing to zero the device (5) Peak reset button → Press during testing to reset…

Text truncated - open the document above for the full version.

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name VALD Pty Ltd Address 115 Breakfast Creek Road Newstead Australia 4006 FRN 0032377418 Grantee Code 2A6SF FCC ID: 2A6SFDMP Authorized Contact Name Samuel James Contact Phone +61 405 282 030 Contact Email [email protected] VALD Pty Ltd (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date:2026-01-19 Print Name: Samuel James Title: Mr *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name VALD Pty Ltd Address 115 Breakfast Creek Road Newstead Australia 4006 FRN 0032377418 Grantee Code 2A6SF FCC ID: 2A6SFDMP Authorized Contact Name Samuel James Contact Phone 0405282030 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date:2026-01-19 Print Name: Samuel James Title: Mr *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 VALD Date: 19 January 2026 Regarding: FCC ID: 2A6SFDMP To whom it ma y concern We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners rela ting to application for equipment authorization with respect to the FCC ID above, including the signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as a cts of our own W e, the undersigned, hereby ce巾fy that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-0「ug Abuse Act of 1988, 21 U.S C. 853(a) Where our agent signs the application for cert巾cation on our behalf, I acknowledge that all responsib山ty for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with V ALD Pty Ltd (ACN 603 446 171) This a uthorization is valid unt仆further written notice from the applicant Title: Director and Chief Marketing Officer 仅 ALO Pty Ltd (ACN 603 446171) 2 030 ' • :, 心It)伈';I令((i I I•:, u, (,.'ICl\:,.i: I, !(d< il,:1, N,. 飞，＇兄,i:::(I i')f.l) ,li,)l,lt:, , ,, , ,1讨 ， I'. • i:,1"1:, , i:h , I'I

To: SGS North America Inc 620 Old Peachtree Road SUITE 100 Suwanee, Georg旧 United States From: VALD Pty Ltd 115 B「eakfastCreek Road Newstead OLD 4006 Australia VALD Regarding: Confidentiality Request r egardin g application for FCC ID: 2A6SFDMP L ONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission's rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application ref erenced above Schematic Block D1ag「ams: Operational Descriptions The documents above contain proprieta「 y information not released to the public. Public disclosure of this information ma y pr ove harmful to the business of the applicant I James Director and Chief Marketing Officer VALD Pty Ltd ( ACN 603 446 171 ) 19 January 2026 \ . .-_...._. ,,) Pi•, 1 l r. 11'··i ,, ,·.11<i.,, .. 1 (:r..:ik r; .i_�,、. ,,,,.. , t, •,1,· () l t) 'l.(.',i'( , .. .,t:1'; I 1°, , . c,:, ,jiJ(I I

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 5 External Photos for SHCR2508002160ME SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 5 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 4 of 5 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 5 of 5

Page 1 of 1

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 4 Internal Photos for SHCR2508002160ME SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 4 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 4 of 4

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR250800216002 Page: 1 of 10 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Member of the SGS Group (SGS SA) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China 1 Cover Page RF Exposure Evaluation Report Application No.: SHCR2508002160ME FCC ID: 2A6SFDMP Applicant: VALD Pty Ltd Address of Applicant: 115 Breakfast Creek Road, Newstead, Queensland, Australia, 4006 Manufacturer: VALD Pty Ltd Address of Manufacturer: 115 Breakfast Creek Road, Newstead, Queensland, Australia, 4006 Factory: VALD Pty Ltd Address of Factory: 115 Breakfast Creek Road, Newstead, Queensland, Australia, 4006 Equipment Under Test (EUT): EUT Name: DynaMo Model No.: Plus Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2025-08-20 Date of Test: 2025-08-21 to 2025-09-16 Date of Issue: 2025-09-17 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR250800216002 Page: 2 of 10 Revision Record Version Description Date Remark 00 Original 2025-09-17 / Authorized for issue by: Tested By Wade Zhang/Project Engineer Approved By Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR250800216002 Page: 3 of 10 2 Contents Page 1 Cover Page ........................................................................................................................................ 1 2 Contents ............................................................................................................................................ 3 3 General Information .......................................................................................................................... 4 3.1 General Description of E.U.T. .................................................................................................... 4 3.2 Details of E.U.T. ......................................................................................................................... 4 3.3 Separation Distance ................................................................................................................... 4 3.4 Test Location .............................................................................................................................. 5 3.5 Test Facility ................................................................................................................................ 5 4 FCC Radiofrequency radiation exposure limits ............................................................................ 6 4.1 RF Exposure Test Exemptions for single RF sources ............................................................... 6 4.1.1 Blanket 1 mW Blanket Exemption ...................................................................................... 6 4.1.2 MPE-based Exemption ........................................................................................................ 6 4.1.3 SAR-based Exemption ........................................................................................................ 7 4.2 RF Exposure Test Exemptions for Simultaneous Transmission ................................................ 8 5 Measurement and Calculation ....................................................................................................... 10 5.1 Maximum transmit power ......................................................................................................... 10 5.2 RF Exposure Calculation ......................................................................................................... 10 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR250800216002 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Power supply: DC 3.7V Li-ion Battery Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: Chip Antenna Antenna Gain: -0.65dBi (Provided by manufacturer) Antenna Number: 1 3.3 Separation Distance Separation distance between the antenna to person (R): ＜5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or ex…

Text truncated - open the document above for the full version.

Version: L Issued Date: 2023/05/24 Approval Sheet (產品承認書) 產品名稱 (Product) Bluetooth Low Energy Module 解決方案 (Solution) Nordic nRF52840 aQFN Package 產品型號 (Model No.) MDBT50Q – 1MV2 (Chip Antenna) MDBT50Q – P1MV2 (PCB Antenna) 產品料號 (Part No.) see 4.3 Order Code Working distance (in Meters) Operating Temperature Model 125 Kbps 1 Mbps 2 Mbps MDBT50Q-1MV2 over 550 over 300 over 150 -40 ~ 85°C MDBT50Q-P1MV2 over 450 up to 250 up to 120 -40 ~ 85°C Working range is tested in open space 7 2. Product Dimension 2.1. PCB Dimensions & Pin Indication ‧MDBT50Q-1MV2 8 ‧MDBT50Q-P1MV2 9 2.2. Recommended Layout of Solder Pad Graphs are all in Top View, Unit in mm. 10 11 2.3. RF Layout Suggestion (aka Keep-Out Area) Make sure to keep the “No Ground Pad” as wider as you can regardless of the size of your PCB. No Ground Pad should be included in the corresponding position of the antenna in EACH LAYER. Place the module towards the edge of PCB to have better performance than placing it on the center. Welcome to send us your layout in PDF for review at [email protected] or your contact at Raytac with title “Layout reviewing – Raytac Model No. – YOUR company’s name”. 12 13 Examples of “NOT RECOMMENDED” layout 2.4. Footprint & Design Guide Please visit “Support” page of our website to download. The package includes footprint, 2D/3D drawing, reflow graph/solder profile and recommended spec for external 32.768khz. 14 2.5. Pin Assignment Pin No. Name Pin function Description (1) GND Power Ground (2) GND Power Ground (3) P1.10 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) (4) P1.11 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) (5) P1.12 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) (6) P1.13 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) (7) P1.14 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) (8) P1.15 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) (9) P0.03 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) AIN1 Analog input Analog input (10) P0.29 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) AIN5 Analog input Analog input (11) P0.02 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) AIN0 Analog input Analog input (12) P0.31 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) AIN7 Analog input Analog input (13) P0.28 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) AIN4 Analog input Analog input (14) P0.30 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) AIN6 Analog input Analog input 15 Pin No. Name Pin function Description (15) GND Power Ground (16) P0.27 Digital I/O General-purpose I/O (17) P0.00 Digital I/O General-purpose I/O XL1 Analog input Connection for 32.768 kHz crystal (18) P0.01 Digital I/O General-purpose I/O XL2 Analog input Connection for 32.768 kHz crystal (19) P0.26 Digital I/O General-purpose I/O (20) P0.04 Digital I/O General-purpose I/O AIN2 Analog input Analog input (21) P0.05 Digital I/O General-purpose I/O AIN3 Analog input Analog input (22) P0.06 Digital I/O General-purpose I/O (23) P0.07 Digital I/O General-purpose I/O TRACECLK Trace clock Trace buffer clock (24) P0.08 Digital I/O General-purpose I/O (25) P1.08 Digital I/O General-purpose I/O (26) P1.09 Digital I/O General-purpose I/O TRACEDATA3 Trace data Trace buffer TRACEDATA [3]. (27) P0.11 Digital I/O General-purpose I/O TRACEDATA2 Trace data Trace buffer TRACEDATA[2]. (28) VDD Power Power supply (29) P0.12 Digital I/O General-purpose I/O TRACEDATA1 Trace data Trace buffer TRACEDATA [1]. (30) VDDH Power High voltage power supply (31) DCCH Power DC/DC converter output (32) VBUS Power 5V input for USB 3.3V regulator (33) GND Power Ground (34) D˗̶̶̶ Digital I/O USB D- (35) D+ Digital I/O USB D+ 16 Pin No. Name Pin function Description (36) P0.14 Digital I/O General-purpose digital I/O (37) P0.13 Digital I/O General-purpose digital I/O (38) P0.16 Digital I/O General-purpose digital I/O (39) P0.15 Digital I/O General-purpose digital I/O (40) P0.18 Digital I/O General-purpose digital I/O (recommended usage: QSPI / CSN) nRESET Configurable as system RESET (41) P0.17 Digital I/O General-purpose digital I/O (42) P0.19 Digital I/O General-purpose digital I/O (recommended usage: (QSPI / SCK) (43) P0.21 Digital I/O General-purpose digital I/O (recommended usage: QSPI) (44) P0.20 Digital I/O General-purpose digital I/O (45) P0.23 Digital I/O General-purpose digital I/O (recommended usage: QSPI) (46) P0.22 Digital I/O General-purpose digital I/O (recommended usage: QSPI) (47) P1.00 Digital I/O General-purpose digital I/O (recommended usage: QSPI) TRACEDATA0 Trace data Trace buffer TRACEDATA [0]. (48) P0.24 Digital I/O General-purpose digital I/O (49) )) P0.25 Digital I/O General-purpose digital I/O (50) P1.02 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) (51) SWDIO Debug Serial wire debug I/O for debug and programming (52) P0.09 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) NFC1 NFC input NFC antenna connection (53) SWDCLK Debug Serial wire debug clock input for debug and programming (54) P0.10 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) NFC2 NFC input NFC antenna connection 17 Pin No. Name Pin function Description (55) GND Power Ground (56) P1.04 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) (57) P1.06 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) (58) P1.07 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) (59) P1.05 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) (60) P1.03 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) (61) P1.01 Digital I/O General-purpose I/O (standard drive, low frequency I/O only) 2.6. GPIO Located Near the Radio Please refe…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR250800216001 Page: 1 of 59 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Member of the SGS Group (SGS SA) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China TEST REPORT Application No.: SHCR2508002160ME FCC ID: 2A6SFDMP Applicant: VALD Pty Ltd Address of Applicant: 115 Breakfast Creek Road, Newstead, Queensland, Australia, 4006 Manufacturer: VALD Pty Ltd Address of Manufacturer: 115 Breakfast Creek Road, Newstead, Queensland, Australia, 4006 Factory: VALD Pty Ltd Address of Factory: 115 Breakfast Creek Road, Newstead, Queensland, Australia, 4006 Equipment Under Test (EUT): EUT Name: DynaMo Model No.: Plus Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2025-08-20 Date of Test: 2025-08-21 to 2025-09-16 Date of Issue: 2025-09-17 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR250800216001 Page: 2 of 59 Revision Record Version Description Date Remark 00 Original 2025-09-17 / Authorized for issue by: Tested By Wade Zhang/Project Engineer Approved By Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR250800216001 Page: 3 of 59 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2020) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2020) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Conducted Emissions at AC Powe…

Text truncated - open the document above for the full version.