2A6T6OC14.0MP Wireless IP Camera

FCC Caution: Any Changes or modications not expressly approved by the party responsible for c ompliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

AssemblabsKft Address:27bPipautca,Dunakeszi,Peat,Hungary,2120 Email:[email protected] Tel:36205722758Fax:0627638109 CFR47§2.911(d)(5)(i)AttestationLetter AttestationLetter Date:11/22/2023 FEDERALCOMMUNICATIONSCOMMISSIONS AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsCFR47§2.911(d)(5)(i)Filing FCCID:2A6T6OC1 AssemblabsKftcertifiesthattheequipmentforwhichauthorizationissought,isnot“covered” equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903ofthe FCCrules. Sincerely, Signature: PrintedName:CsabaJozsefSzanto Title:CEO

AssemblabsKft Address:27bPipautca,Dunakeszi,Peat,Hungary,2120 Email:[email protected] Tel:36205722758Fax:0627638109 CFR47§2.911(d)(5)(ii)AttestationLetter AttestationLetter Date:11/22/2023 FEDERALCOMMUNICATIONSCOMMISSIONS AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsCFR47§2.911(d)(5)(ii)Filing FCCID:2A6T6OC1 AssemblabsKftcertifiesthatasofthedateofthefilingoftheapplication,theapplicantisnot identifiedontheCoveredListasanentityproducing“covered”equipment. Sincerely, Signature: PrintedName:CsabaJozsefSzanto Title:CEO

U.S.AGENTLETTEROFATTESTATION Date:2023-10-16 FEDERALCOMMUNICATIONSCOMMISSION AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Ref:AttestationStatementsCFR47§2.911(d)(7)Filing FCCID:2A6T6OC1 AssemblabsKftcertifiesthat,asofthedateofthefilingoftheapplication,IconsighInc.is ourdesignatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. AssemblabsKftacceptstomaintainanagentfornolessthanoneyearafterthegranteehas terminatedallmarketingandimportationortheconclusionofanyCommission-related proceedinginvolvingtheequipment. IconsighInc.accepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: CompanyName:IconsighInc. Address:2310HomesteadRoad,SuiteC1,LosAltos,CA,94024,USA FRN:0033398652 Tel.:+1(408)320-9867 Email:[email protected] Signedby(printedname):BenjaminKaur Signature: Applicant:AssemblabsKft Address:27bPipautca,Dunakeszi,Peat,Hungary,2120 FRN:0032392136 Tel:36205722758 Email:[email protected] Signedby(printedname):CsabaJozsefSzanto Signature:

AssemblabsKft Address:27bPipautca,Dunakeszi,Peat,Hungary,2120 Email:[email protected] Tel:36205722758Fax:0627638109 QA-FR-170-B7/29/2014 FCCAuthorization Date:2023-11-22 FEDERALCOMMUNICATIONSCOMMISSIONS AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Subject:AgentAuthorization Towhomitmayconcern: WeAssemblabsKft,theundersigned,herebyauthorizesWorldAlliance Testing&Certification(Shenzhen)Co.,Ltdtoactonitsbehalfinallmattersrelating toapplicationforEquipmentauthorization,includingthesigningofalldocuments relatingtothesematters.AllactscarriedoutbyWorldAllianceTesting& Certification(Shenzhen)Co.,Ltdonourbehalfshallhavethesameeffectasourown action. We,theundersigned,herebycertifythatwearenotsubjecttoadenialoffederalbenefits, thatincludesFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988, 21U.S.C.862. Thisauthorizationisvaliduntilfurtherwrittennoticefromtheapplicant. Sincerely, Signature: CsabaJozsefSzanto Title:CEO

AssemblabsKft Address:27bPipautca,Dunakeszi,Peat,Hungary,2120 Email:[email protected] Tel:36205722758Fax:0627638109 FCCConfidentialAuthorization Date:2023-11-22 FEDERALCOMMUNICATIONSCOMMISSIONS AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Subject:ConfidentialityRequestregardingapplicationforcertificationof FCCID:2A6T6OC1 InaccordancewithSections0.457and0.459oftheCommission’sRules,Assemblabs Kftherebyrequestslong-termconfidentialtreatmentofinformationaccompanyingthis applicationasoutlinedbelow: BlockDiagram Schematics OperationDescription SoftwareSecurityDescription Theabovematerialscontainproprietaryandconfidentialinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesematerialsprovidesunjustified benefitstoitscompetitorsinthemarket. Sincerely, Signature: CsabaJozsefSzanto Title:CEO

AssemblabsKft Address:27bPipautca,Dunakeszi,Peat,Hungary,2120 Email:[email protected] Tel:36205722758Fax:0627638109 Date:2023-11-22 FEDERALCOMMUNICATIONSCOMMISSIONS AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 DearSir/Madam, TheMainchip,model:RTL8822CS,installedinourproduct4.0MPWirelessIPCamera, model:OC1,FCCID:2A6T6OC1,thischipsupports2.4GWi-Fi,5.8GWi-Fiand Bluetoothfunction,butformarketingpurpose,thischiponlysupports2.4GWi-Fiand 5.8GWi-Fi,notsupportBluetoothfunction.TheBluetoothfunctionwasdisabledtouse bymanufactureinthesoftware,theenduserhasnocapabilitytoactivateit. Signature: CsabaJozsefSzanto Title:CEO

EUT E EXTERN NAL PHO OTOGRAP Page 1 of PHS f 5 Repport No.: RWAAY202300001 Page 2 of f 5 Repport No.: RWAAY202300001 Page 3 of f 5 Repport No.: RWAAY202300001 Page 4 of f 5 Repport No.: RWAAY202300001 Page 5 of f 5 Repport No.: RWAAY202300001

Label Label Location Information

EUT I INTERNA ANT 2 AL PHOT TOGRAP Page 1 of PHS f 7 Repport No.: RWA A AY202300001 ANT 1 Page 2 of f 7 Repport No.: RWAAY202300001 Page 3 of f 7 Repport No.: RWAAY202300001 Page 4 of f 7 Repport No.: RWAAY202300001 Page 5 of f 7 Repport No.: RWAAY202300001 Page 6 of f 7 Repport No.: RWAAY202300001 Page 7 of f 7 Repport No.: RWAAY202300001

Report No.: RWAY202300001 Report Template: TR-4 -E-011 Page 1 of 7 RF Exposure Evaluation Report Report No.: RWAY202300001 Applicant: Assemblabs Kft Address: 27b Pipa utca,Dunakeszi,Peat,Hungary, 2120 Product Name: 4.0MP Wireless IP Camera Product Model: OC1 Multiple Models: N/A Trade Mark: Remootio FCC ID: 2A6T6OC1 Standards: 47 CFR §1.1307 KDB 447498 D04 Interim General RF Exposure Guidance v01 Test Date: 14 Nov, 2023 Test Result: Complied Report Date: 20 Nov, 2023 Reviewed by: Approved by: Abel Chen Project Engineer Jacob Kong Manager Prepared by: World Alliance Testing and Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” Report No.: RWAY202300001 Report Template: TR-4 -E-011 Page 2 of 7 Announcement 1．This test report shall not be reproduced in full or partial, without the written approval of World Alliance Testing and Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. 5. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Revision History Version No. Issued Date Description 00 20 Nov, 2023 Original Report No.: RWAY202300001 Report Template: TR-4 -E-011 Page 3 of 7 Contents 1 General Information ............................................................................................................................ 4 1.1 Client Information ...................................................................................................................... 4 1.2 Product Description of EUT ....................................................................................................... 4 1.3 Laboratory Location ................................................................................................................... 4 2 RF Exposure Evaluation ..................................................................................................................... 5 2.1 Standard .................................................................................................................................... 5 2.2 Result......................................................................................................................................... 7 Report No.: RWAY202300001 Report Template: TR-4 -E-011 Page 4 of 7 1 General Information 1.1 Client Information Applicant: Assemblabs Kft Address: 27b Pipa utca,Dunakeszi,Peat,Hungary, 2120 Manufacturer: Assemblabs Kft Address: 27b Pipa utca,Dunakeszi,Peat,Hungary, 2120 1.2 Product Description of EUT The EUT is 4.0MP Wireless IP Camera that contains 2.4G and 5G WLAN radios. Sample Serial Number 2DDC-3, 2DDC-6 (assigned by WATC) Sample Received Date 2023-11-05 Sample Status Good Condition Frequency Range 2.4G WLAN: 2412MHz - 2472MHz 5.8G WLAN: 5725MHz – 5850MHz Maximum Conducted Output Power 2412MHz - 2472MHz: 24.63dBm 5725MHz – 5850MHz: 14.93dBm Modulation Technology GFSK Spatial Streams MIMO (2TX, 2RX) Power Supply DC 12V/1000mA from adapter Operating temperature # -20 deg.C to +50 deg.C Adapter Information Model: SAW15A-120-1000UD Input: AC100-240V, 50/60Hz, 0.5A Output: DC 12V/1000mA, Modification Sample No Modification by the test lab 1.3 Laboratory Location World Alliance Testing and Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China Tel: +86-755-29691511, Email: [email protected] The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 463912, the FCC Designation No. : CN5040. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0160. Report No.: RWAY202300001 Report Template: TR-4 -E-011 Page 5 of 7 2 RF Exposure Evaluation 2.1 Standard According to §1.1307(b)(3)(i), For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of this section. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: (C) Or using Table 1 and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed …

Text truncated - open the document above for the full version.

PartApprovedSheet ProductDescriptionInternalAntenna:S41-WIFI2.4/5.8G-FPCAntenna-L100MM-IPEX CompanyName AssemblabsKft ApprovedDate 16 th ,October2023 1.AntennaStructureChart North Wing, 5th Floor, Building 1, Weixin Software Technology Park, No. 9, Gaoxin South 9th Road, Nanshan District, Shenzhen, China 2.AntennaPerformance SWR 3.Antennaassemblypicture: TechnicalSpecifications ElectricalSpecifications FrequencyRange2400~2500/5100~5850MHz VSWR ≤2.0 Gain InputImpedance50Ω MaximumInputPower50W MechanicalSpecifications AntennaColor Black InputconnectorIPEX Cablelength100MM WorkingTemperature-40 °C ~+85 °C WorkingHumidity20~80% 2dBi for 2.4G 0dBi for 5G RF113Specification 1.Scope Thisspecificationcoverstheconstructionandtheelectricalpropertiesofwire.CoaxialWireAWG32. 2.Construction ItemUnitDetails Conductor Material-Silver-coatedcopperwire Composition(No./mm)7/0.08 ODmm0.24 Orientation-S Insulation Material-FEP Insulationcolor-Natural Nom.Thicknessmm0.22 OD.mm0.69 BraidShield Material-Tinnedcopperwire Composition(No./mm)16/4/0.05 Coverage(%)>=90 Jacket Material-FEP Nom.Thicknessmm0.12 ODmm1.13±0.10 3.ElectricalProperties(at20°C) ItemUnitDetails ConductorResistanceQ/km571(Max.) InsulationResistanceMQ·km100(Min.) DielectricStrength(AC)V/1Min500 ImpedanceΩ50±3 Temperature°C200 RatedvoltageV30 4.Thecross-sectionofthecableasbelow:

Report No.: RWAY202300001B Report Template: TR-4-E-010 Page 1 of 39 FCC Test Report Report No.: RWAY202300001B Applicant: Assemblabs Kft Address: 27b Pipa utca, Dunakeszi, Peat,Hungary, 2120 Product Name: 4.0MP Wireless IP Camera Product Model: OC1 Multiple Models: N/A Trade Mark: Remootio FCC ID: 2A6T6OC1 Standards: FCC CFR Title 47 Part 15E (§15.407) Test Result: Complied Issue Date: 21 November, 2023 Reviewed by: Approved by: Abel Chen Project Engineer Jacob Kong Manager Prepared by: World Alliance Testing and Certification (Shenzhen) Co., Ltd No. 1002, East Block, Laobing Building, Xingye Road 3012, Xixiang street, Bao'an District, Shenzhen, Guangdong, People’s Republic of China This report may contain data that are not covered by the NVLAP accreditation and shall be marked with an asterisk “★” Report No.: RWAY202300001B Report Template: TR-4-E-010 Page 2 of 39 Announcement 1．This test report shall not be reproduced in full or partial, without the written approval of World Alliance Testing and Certification (Shenzhen) Co., Ltd 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. 5. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. Revision History Version No. Issued Date Description 00 21 November, 2023 Original Report No.: RWAY202300001B Report Template: TR-4-E-010 Page 3 of 39 Contents 1 General Information ............................................................................................................................ 4 1.1 Client Information ...................................................................................................................... 4 1.2 Product Description of EUT ....................................................................................................... 4 1.3 Antenna information .................................................................................................................. 4 1.4 Related Submittal(s)/Grant(s) .................................................................................................... 5 1.5 Measurement Uncertainty ......................................................................................................... 5 1.6 Laboratory Location ................................................................................................................... 5 1.7 Test Methodology ...................................................................................................................... 5 2 Description of Measurement .............................................................................................................. 6 2.1 Test Configuration ...................................................................................................................... 6 2.2 Test Auxiliary Equipment ........................................................................................................... 7 2.3 Test Setup .................................................................................................................................. 7 2.4 Test Procedure .......................................................................................................................... 9 2.5 Measurement Method ............................................................................................................... 11 2.6 Measurement Equipment ......................................................................................................... 11 3 Test Results ....................................................................................................................................... 13 3.1 Test Summary .......................................................................................................................... 13 3.2 Limit ......................................................................................................................................... 14 3.3 AC Line Conducted Emissions Test Data ................................................................................ 15 3.4 Radiated emission Test Data ................................................................................................... 17 3.5 RF Conducted Test Data ......................................................................................................... 26 3.5.1 6dB Emission Bandwidth and 99% Occupied Bandwidth ............................................ 26 3.5.2 Maximum conducted output power .............................................................................. 26 3.5.3 Power Spectral Density ................................................................................................ 27 3.5.4 Duty Cycle .................................................................................................................... 28 4 Test Setup Photo ............................................................................................................................... 38 5 E.U.T Photo ........................................................................................................................................ 39 Report No.: RWAY202300001B Report Template: TR-4-E-010 Page 4 of 39 1 General Information 1.1 Client Information Applicant: Assemblabs Kft Address: 27b Pipa utca, Dunakeszi, Peat, Hungary, 2120 Manufacturer: Assemblabs Kft Address: 27b Pipa utca, Dunakeszi, Peat, Hungary, 2120 1.2 Product Description of EUT The EUT is 4.0MP Wireless IP Camera that contains 2.4G and 5G WLAN radios, this report covers the full testing of the 5G WLAN radio. Sample Serial number 2DDC-3 for …

Text truncated - open the document above for the full version.

TEST SETUP P PHOTOG GRAPHS AC Li Page 1 of ine Conducte f 2 ed Emission Repport No.: RWAAY202300001 R Page 2 of RadiatedEm f 2 mission Repport No.: RWAAY202300001