2A6UA-BM01-AVideo Baby Monitor ( Camera )

BM01 [email protected] www.momcozy.com Rev_1.0_EN_DE_FR_ES ENGLISH 0102 CONTENTS SAFETY INSTRUCTIONS CAUTION PACKAGE CONTENTS PRODUCT OVERVIEW GETTING STARTED 1. Charging & Powering Baby Monitor 2. Powering Camera 3. Pairing the Baby Monitor & the Camera 4. Placing the Camera 5. Wall Mounting Camera FUNCTIONS & OPERATIONS Status Icons 1. Volume Adjustment 2. Selecting a Camera & Scanning Cameras 3. Digital Zoom 4. Lullaby 5. Talk Back 6. Brightness 7. Screen Sleep 8. Add A New Camera 9. Split Screen 10. Selecting a Camera & Scanning 11. Deleting A Camera 12. Speaker Volume 13. Alarm Volume 14. VOX 15. Alarm Clock 16. Date/Time 17. Temperature 18. Night Vision 19. Language 03 03 04 05 08 08 08 08 09 10 11 11 12 12 12 13 13 13 14 14 15 16 16 17 17 18 18 19 20 20 21 20. Lullabies 21. Refresh Rate 22. Factory Settings 23. Contact Us SPECIFICATIONS TROUBLESHOOTING FCC COMPLIANCE WEEE COMPLIANCE IC CAUTION 21 21 22 22 23 25 27 28 28 CAUTION · Check the reception regularly. Test the camera before use and after changing the camera’s location. · For indoor use only. · Clean the camera with a dry cloth only. · Do not block any ventilation openings. · Microphone feedback might occur when the monitor is too close to the camera. Please keep them at least 1.5 m / 4.9ft apart. · NOT toys. Do not allow children to play with them. · This product is NOT intended to replace the proper supervision of children. You MUST check your child’s activity regularly. · This product is not intended for use as a medical camera and its use should not replace adult supervision. · Unplug the product during lightning storms. · Please check the operating range and condition of the camera carefully at the initial installation, and on a regular basis after that. SAFETY INSTRUCTIONS · Strangulation Hazard—Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9 m) away). Do not remove this tag. · NEVER place the camera or cord in or near the crib or playpen. · NEVER mount the camera directly above the crib or playpen to avoid the risk of injury. · Only use the AC adapters provided. · Never use the unit near water, including near a bathtub, sink, laundry machine tube, wet basement, etc. · Do not install near any heat sources such as radiators, heat registers, stoves, or other devices that produce heat. · Only use attachments and accessories specified by the manufacturer. · Unplug this device when unused for long periods of time. 0304 PACKAGE CONTENTS Camera Baby Monitor Wall Mount Bracket Screw * 2 Wall Anchor * 2 User Guide Adapter * 2 Power Cable * 2 User Guide 3 ft 0506 PRODUCT OVERVIEW Monitor 17 18 1 2 3 4 5 6 7 8 9 10 12 11 13 14 15 16 17 18 Power On/Off & LCD On/Off: Press and hold for 3 seconds to turn on/off the monitor. Short press: Turn on/off the LCD screen. When the screen is turned on, press and hold for 8 seconds to reset the system. Volume adjustment: Press the left button to reduce the speaker volume, and press the right button to increase the speaker volume. Menu: Press to enter/exit the menu. Camera Switch: Press to switch to another camera if connected with two or more cameras. Charging Indicator: Solid blue during charging, and goes out when fully charged; Blinking red when the monitor is in a low power state. Up Button: Press to move the camera upward or to change your selection upward. Left Button: Press to move the camera leftward or to change your selection leftward. Right Button: Press to move the camera rightward or change your selection rightward. Confirm/Zoom Button: Press to zoom in/out to confirm your selection. Down Button: Press to move the camera downward or change your selection downward. Monitoring Status Indicator: Green. When the camera is disconnected, it flashes slowly; when the camera enters pairing mode, it flashes quickly; when the camera is turned on, it remains steady. Indicator: 1. The louder the sound is received by the monitor, the more indicator is on. 2. Signal indicator (temperature alarm/off-connection alarm/feeding alarm). Talk: Press to talk to your baby. Lullaby: Press to select your desired lullaby song. Indicator: The louder the sound is received by the monitor, the more indicator is on. Microphone. Stand. Speaker. 3 12 16 8 10 1 2 6 7 11 13 4 9 15 14 5 0708 Camera 1 2 3 4 5 Night Vision Sensor Camera Lens Microphone Speaker Antenna 6 7 8 9 10 Pair Button Charging Port Infrared LEDs Temperature Sensor Threaded Socket 1 2 3 4 6 7 8 10 5 GETTING STARTED 1. Charging & Powering Baby Monitor 1) Connect the monitor adapter to the monitor and a power outlet. 2) Unplug the unit when its power indicator turns off, indicating a full charge. Unplug the unit after fully charging the monitor, which can prolong the lifespan of the device. 2. Powering Camera 1) Connect the camera to power source via the USB Type-C cable and camera adapter. · Only use the power adapters provided. · Do not place the camera and power cord within the reach of your baby. 3. Pairing the Baby Monitor & the Camera Based on default setting, one camera is paired with the monitor. When you power on the monitor and camera, the two will automatically pair. Step 2: 1. Select through -> -> button. Step 1: 1. Press to enter menu page. 2. Choose -> button. Adding a new camera to the baby monitor 9 0910 4. Placing the Camera For safety concerns and better vision in night vision mode, if the camera is placed on a 0.75 m / 2.5ft table top, the distance from the baby is at least 1.5 m / 4.9ft. ( The baby monitor has an infrared night vision capacity up to 6 m / 19.7ft ). Most importantly, make sure that the camera power cord is out of your baby's reach. 1.5 m / 4.9ft 0.75 m / 2.5ft · Once they’re paired successfully, the camera number with icon will be shown at the top left of the screen. · It is recommended to pair in the baby's room, or wherever you intend to place the camera. · High-pitched noises might occur when the monitor is too close to the camera. Please keep them at leas…

Text truncated - open the document above for the full version.

Hong Kong Lute Technology Co., Limited Authorization Company: Hong Kong Lute Technology Co., Limited Address: Room 02, 21/F, Hip Kwan Commercial Building, 38 Pitt Street, Yau Ma Tei, Kowloon，Hongkong Product Name: Video Baby Monitor ( Camera ) Model Number(s): BM01 Product Description: Video Baby Monitor ( Camera ) We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2022/11/02 Name: Richard Pan Title: Assistant General Manager Company: Hong Kong Lute Technology Co., Limited

Hong Kong Lute Technology Co., Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022/11/02 Subject; Request for Confidentiality FCC ID: 2A6UA-BM01-A To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Richard Pan Title: Assistant General Manager

External Photos

Size:20*20mm FCC ID: 2A6UA-BM01-A Label location

Internal Photos Antenna

FCC §15.247 (i), §2.1091 – RF Exposure FCC ID: 2A6UA-BM01-A Applied procedures / limit According to FCC §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density MPE PREDICTION Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna, R=0.2m TEST RESULTS Tune up Produce power Maximum peak output power (dBm) Output power to antenna (mW) Antenna Gain (numeric) Power Density (S) (mW/ cm2) Limit (mW / cm2 ) Result GFSK 20±1 21 125.9 1.64(2.16dBi) 0.0411 1 Pass

QR/RD-P01-09B SPECIFICATION Shenzhen Guandetong Electronic Limited http://www.szgdtrf.com 深圳市冠得通电子有限公司 Shenzhen Guandetong Electronic Limited 2.4G 2DB white ultrasonic antenna ,1.13 gray color, coaxial line ,line length 68mm, first generation terminal Product specification book client Shenzhen Dayunlinks Co.,ltd Frequency paragraph 2400-2500MHz project name Version A1 Customer material number Part No. Number R F design Xiaobing RF manager LIU LIANG Structural design Wangdong Structural manager WANG HUA technical director ANDY date 2022-10-25 □NG Whether the assembly meets the requirements of your company：□OK Page 2 Table of contents Cover ....................................................................................................... 1 Table ......................................................................................... 2 1.Product Image ....................................... 3 2.Product parameters .................................... 3 3.S11 data ............................................................. 4 4.product structure diagram ......................... 4 5. Oeds passive test and 3D report ................... 5 6. Environmental reliability experiment report ........... 5 Page 3 Product Image Product parameters Product test parameters 产品名称(Name) 2.4G FPC 天线 产品型号(Model Type) GDT-SL-113-68 电 性 能 指 标 (Electrical Specifications) 频率范围 (Frenquency Range) 2400-2500MHz 极化方式 （Polarization） 垂直 输入阻抗(Impedance) 50 Ω 辐射方向 全向 驻波比（VSWR） ≦2 功率容量(Power) 50W 增益(Gain) 2dBi 带宽 (Bandwidth 100MHz 机 械 指 标 (Mechanical Specifications) 尺寸 (Dimensions) 75±2mm 天线颜色(Chassis Color) 白色 连接器型号 (Connector) IPEX(1 代) 引线长度(Cable Length) 68MM±3 天线材料 (Chassis Material) ABS 线材型号 1.13 灰色 工作温度 (Working Temperature) -40°C-+85°C 存放温度 (Limit Temperature) -40°C-+85°C Page 4 三、S11（ VSWR 、Return loss 、Smith）数据 Structural drawing Page 5 天线无源测试和3D报告 Anti -spectacular test and 3D report Environmental performance test project Test Conditions Specifica tion Storage environme nt Test temperature, humidity, and air pressure as follows: 1. The temperature is -30 °C ~+80 °C 2. The relative humidity is 45% -85% 3. The air pressure is 86kPa-106kPa Electrical mechanical performance is normal High and low temperatur e test Make 5 cycles between 70 ° C and 40 ° C, and then 1-2 hours under normal conditions to check the appearance quality. The size should meet the regulations and meet the satisfaction For mechanical and electrical performance Page 6 Evergrande damp heat test The relative humidity is 95 ± 3%, the test temperature: 40 ° C. After 2H, the electrical performance is determined within 5 minutes after the test product is taken out. 1-2 hours under the piece, check the appearance quality The size should meet the regulations and meet the satisfaction For mechanical and electrical performance Vibration test The frequency frequency range is 10-55Hz.， Sitering amplitude: 0.35mm, acceleration amplitude: 50.0m/s, frequency scan loop: 30 times Electrical mechanical performance is normal Drop test 1M high altitude fell freely 3 times in the direction of the perpendicular axis Electrical mechanical performance is normal

No.：BCTC/RF-EMC-005 Page: 1 of 41 Edition：A.5 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2210309789E Applicant: Hong Kong Lute Technology Co., Limited Product Name: Video Baby Monitor ( Camera ) Model/Type Ref.: BM01 Tested Date: 2022-10-09 to 2022-10-18 Issued Date: 2022-10-18 Report No.: BCTC2210309789E No.：BCTC/RF-EMC-005 Page: 2 of 41 Edition：A.5 FCC ID: 2A6UA-BM01-A The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: Video Baby Monitor ( Camera ) Trademark: MOMCOZY Model/Type Ref.: BM01 Prepared For: Hong Kong Lute Technology Co., Limited Address: Room 02, 21/F, Hip Kwan Commercial Building, 38 Pitt Street, Yau Ma Tei, Kowloon, Hongkong Manufacturer: Hong Kong Lute Technology Co., Limited Address: Room 02, 21/F, Hip Kwan Commercial Building, 38 Pitt Street, Yau Ma Tei, Kowloon, Hongkong Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2022-10-09 Sample tested Date: 2022-10-09 to 2022-10-18 Issue Date: 2022-10-18 Report No.: BCTC2210309789E Test Standards: FCC Part15.247 ANSI C63.10-2013 Test Results: PASS Remark: This is 2.4G radio test report. Tested by: Approved by: Brave Zeng/ Project Handler Zero Zhou/Reviewer Report No.: BCTC2210309789E No.：BCTC/RF-EMC-005 Page: 3 of 41 Edition：A.5 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information And Test Setup ..................................................................... 8 4.1 Product Information ............................................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 8 4.4 Channel List .......................................................................................................... 9 4.5 Test Mode ............................................................................................................. 9 4.6 Table Of Parameters Of Text Software Setting ................................................... 10 5. Test Facility And Test Instrument Used ............................................................... 11 5.1 Test Facility ......................................................................................................... 11 5.2 Test Instrument Used .......................................................................................... 11 6. Conducted Emissions .......................................................................................... 13 6.1 Block Diagram Of Test Setup .............................................................................. 13 6.2 Limit .................................................................................................................... 13 6.3 Test Procedure ................................................................................................... 13 6.4 EUT Operating Conditions .................................................................................. 13 6.5 Test Result .......................................................................................................... 14 7. Radiated Emissions ............................................................................................. 16 7.1 Block Diagram Of Test Setup .............................................................................. 16 7.2 Limit .................................................................................................................... 17 7.3 Test Procedure ................................................................................................... 18 7.4 EUT Operating Conditions .................................................................................. 19 7.5 Test Result .......................................................................................................... 19 8. Radiated Band Emission Measurement And Restricted Bands Of Operation ..... 23 8.1 Block Diagram Of Test Setup .............................................................................. 23 8.2 Limit .................................................................................................................... 23 8.3 Test Procedure ................................................................................................... 24 8.4 EUT operating Conditions ................................................................................... 24 8.5 Test Result .......................................................................................................... 25 9. Power Spectral Density Test ............................................................................... 26 9.1 Block Diagram Of Test Setup .............................................................................. 26 9.2 Limit .................................................................................................................... 26 9.3 Test Procedure ................................................................................................... 26 9.4 EUT Operating Conditions .................................................................................. 26 9.5 Test Result ...................................................................................…

Text truncated - open the document above for the full version.

Report No.: BCTC2210309789E No.：BCTC/RF-EMC-005 Page: 39 of 41 Edition：A.5 15. EUT Test Setup Photographs Conducted emissions Photo Radiated Measurement Photos Report No.: BCTC2210309789E No.：BCTC/RF-EMC-005 Page: 40 of 41 Edition：A.5