2A6VF-AB01Averia Beacon

Averia Beacon product description Bluetooth LE accessory for an Averia Collar device The device leverage Bluetooth LE technology and works as a beacon for Averia Collar device 1. “Averia Beacon” design Averia Beacon is designed using high quality materials and electronic components. The appearance of the device is given in Figure 1.1. Figure 1.1. Assembled appearance of Averia Beacon. The black color is a sample, other colors are also possible. Figure 1.2. The explode schema of the BLE Beacon (1- Battery cover, 2- Top case, 3-silicone light guide, 4- CR2032 Li-Ion battery, 5- PCBA, 6- neodymium magnets 3 pcs, 7- Bottom case). Averia Beacon consists of the following components:  polycarbonate case with PCBA (Figure 1.2.) inside;  Neodymium magnets which allow you to attach the device on a metal surface (Figure 1.2.);  CR2032 Li-Ion battery;  Silicone parts: light guide and silicone seal between Top and Bottom case parts and Battery cover and Top Case (is not shown here). The assembled device will comply with the IP54 protection level. The hardware consists of the following components:  a Bluetooth Low Energy radio module for communication with a mobile device (smartphone, tablet, smart watch, etc.) and an internal PCB antenna;  a set of temperature sensors;  a removable CR2032 battery;  a LED indicator which is located onto the PCBA. 2. Primary Application Averia Beacon can be used as follows:  Indoor positioning device – it helps the Averia Collar device to track its indoor location;  The Averia Beacon may help Averia Collar to recognize its outdoor position much faster;  Temperature monitor. 3. Technical Specifications of the device Technical specifications of Averia Beacon are presented in Table 3.1. Table 3.1. Technical specifications of Averia Beacon. Radio module (Bluetooth Low Energy): DA14531-00000FX2 (Renesas) /2.4 GHz Compatible with Bluetooth® v5.1, ETSI EN 300 328 and EN 300 440 Class 2 (Europe), FCC CFR47 Part 15 (US) and ARIB STD-T66 (Japan) Temperature sensors YES, integrated on the PCBA Dimensions 65.1mm * 65.1mm * 9.3mm Device weight ~50g. Battery CR2032 (Li-Ion, 3.0В, 220 mAh) Moisture protection IP54 Battery charge voltage Not acceptable, the battery is NOT rechargeable and it will be replaced with a new one Operating temperature -30 ... +45 o C Storage temperature +20 ... +30 o C AC/DC adaptor Not acceptable LED indicator YES, on the PCBA 3.1 Bluetooth LE module Bluetooth Low Energy (BLE) chip: DA14531-00000FX2. Manufacturer: Renesas (Dialog Semiconductor) FCC compliance: (https://www.renesas.cn/us/en/document/rep/da14531-fcc-certification-test-report- qfn?language=en&r=1564826) BLE complies with specification: 5.1. Maximum output power: 1.734dBm (class 2). Antennas type: internal PCB antenna. Delivery set Device factory package includes:  Averia Beacon – 2 pcs;  User manual (QSG);  Regulatory FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Averia Electronics Inc. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 6/19/2023 U.S. Agent Designation Averia Electronics Inc. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2A6VF-AB01): Name and company of U.S. agent: Averia Electronics Inc. Physical U.S. address of agent: 142W 57th Street, Floor 11, New York, NY 10019 FRN of U.S. agent: 0032397614 Email address of U.S. agent: [email protected] Averia Electronics Inc. acknowledges their obligation to accept service of process on behalf of Averia Electronics Inc. Averia Electronics Inc. with the FRN 0032397614 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). Sincerely, Signature Gennady Spirin Head of Operations Averia Electronics Inc. Signature Gennady Spirin Head of Operations Averia Electronics Inc. 48_[mo del] US_Agent_2.911(d)(7) - U, V04

Averia Electronics Inc. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 6/19/2023 To whom it may concern: We, Averia Electronics Inc. hereby certify that the equipment for which authorization is sought (FCC ID: 2A6VF-AB01) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). Sincerely, Signature Gennady Spirin Head of Operations Averia Electronics Inc. 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V02

FCC ID: 2A6VF-AB01 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT

FCC ID: 2A6VF-AB01 TB-RF-074-1.0 Appendix IID Label Size for the label: 20mm X 20mm Appendix II ID Label Location Averia Beacon FCC ID: 2A6VF-AB01 Model: AB01

FCC ID: 2A6VF-AB01 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 3 Internal of EUT Photo 4 Internal of EUT FCC ID: 2A6VF-AB01 TB-RF-074-1.0 Photo 5 Appearance of PCB Photo 6 Appearance of PCB FCC ID: 2A6VF-AB01 TB-RF-074-1.0 Photo 7 Appearance of PCB Antenna

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0254-3 Page: 1 of 3 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Exposure Evaluation FCC ID: 2A6VF-AB01 1. Client Information Applicant : Averia Electronics Inc. Address : 142W 57th Street, Floor 11, New York, NY 10019 Manufacturer : Averia Electronics Inc. Address : 142W 57th Street, Floor 11, New York, NY 10019 2. General Description of EUT EUT Name : Averia Beacon Model No. : AB01, 2301 Model Different : All PCB boards and circuit diagrams are the same, the only difference is that color. Sample ID : RW-C-202211-0254-1-1# & RW-C-202211-0254-1-2# Product Description : Operation Frequency: Bluetooth 5.1(BLE): 2402MHz~2480MHz Number of Channel: Bluetooth 5.1(BLE): 40 channels Antenna Gain: -5.09dBi PCB Antenna Power Supply : DC 3.0V by button cell Software Version : 1.0.х Hardware Version : AEC_BB05_v01 Remark: The antenna gain provided by the applicant, the adapter and verified for the RF conduction test and adapter provided by TOBY test lab. Note: More test information about the EUT please refer the RF Test Report. Report No.: TBR-C-202211-0254-3 Page: 2 of 3 TB-RF-074-1.0 The RF Exposure Evaluation for FCC: SAR Test Exclusion Calculations FCC: According to 447498 D04 Interim General RF Exposure Guidance v01. The SAR-based exemption formula of § 1.1307(b)(3)(i)(B), repeated here as Formula (B.2), applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power or effective radiated power (ERP), whichever is greater, of less than or equal to the threshold P th (mW). This method shall only be used at separation distances from 0.5 cm to 40 cm and at frequencies from 0.3 GHz to 6 GHz (inclusive). P th is given by Formula (B.2). and f is in GHz, d is the separation distance (cm), and ERP 20cm is per Formula (B.1). The example values shown in Table B.2 are for illustration only. Table B.2—Example Power Thresholds (mW) Report No.: TBR-C-202211-0254-3 Page: 3 of 3 TB-RF-074-1.0 Calculation: Test separation: 5mm Bluetooth LE Mode Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mW) Limit P th (mW) 2.402 1.734 1±1 2 1.585 3 2.440 1.587 1±1 2 1.585 3 2.480 1.410 1±1 2 1.585 3 The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 D04, No SAR is required. The measurement results comply with the FCC Limit per 47 CFR 2.1093 and the RSS-102§4 Table 4 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06, No SAR is required. -----END OF THE REPORT-----

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202211-0254-1 Page: 1 of 27 FCC ID: 2A6VF-AB01 TB-RF-074-1.0 RF Test Data for Bluetooth LE (Conducted Measurements) General Description of EUT Product Name: Averia Beacon Test Model: AB01 Sample ID: RW-C-202211-0254-1-2# Environmental Conditions Temperature: 25°C Relative Humidity: 55% Test Voltage: DC 3V Test Engineer: Huang jian ping Note: For a more detailed features description, please refer to the report TBR-C-202211-0254-1 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202211-0254-1 Page: 2 of 27 FCC ID: 2A6VF-AB01 TB-RF-074-1.0 Contents 1. Duty Cycle ........................................................................................................................................................................................... 3 2. Maximum Conducted Output Power ................................................................................................................................................. 6 3. -6dB Bandwidth .................................................................................................................................................................................. 9 4. Occupied Channel Bandwidth ......................................................................................................................................................... 12 5. Maximum Power Spectral Density Level ......................................................................................................................................... 15 6. Band Edge ........................................................................................................................................................................................ 18 7. Conducted RF Spurious Emission .................................................................................................................................................. 21 8. Restrict Band .................................................................................................................................................................................... 25 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202211-0254-1 Page: 3 of 27 FCC ID: 2A6VF-AB01 TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT BLE 1Mbps 2402 Ant1 67.74 1.69 2.38 NVNT BLE 1Mbps 2440 Ant1 69.35 1.59 2.33 NVNT BLE 1Mbps 2480 Ant1 68.25 1.66 2.33 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202211-0254-1 Page: 4 of 27 FCC ID: 2A6VF-AB01 TB-RF-074-1.0 Test Graphs Duty Cycle NVNT BLE 1Mbps 2402MHz Ant1 Duty Cycle NVNT BLE 1Mbps 2440MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202211-0254-1 Page: 5 of 27 FCC ID: 2A6VF-AB01 TB-RF-074-1.0 Duty Cycle NVNT BLE 1Mbps 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202211-0254-1 Page: 6 of 27 FCC ID: 2A6VF-AB01 TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT BLE 1Mbps 2402 Ant1 1.734 30 Pass NVNT BLE 1Mbps 2440 Ant1 1.587 30 Pass NVNT BLE 1Mbps 2480 Ant1 1.410 30 Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202211-0254-1 Page: 7 of 27 FCC ID: 2A6VF-AB01 TB-RF-074-1.0 Test Graphs Power NVNT BLE 1Mbps 2402MHz Ant1 Power NVNT BLE 1Mbps 2440MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202211-0254-1 Page: 8 of 27 FCC ID: 2A6VF-AB01 TB-RF-074-1.0 Power NVNT BLE 1Mbps 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202211-0254-1 Page: 9 of 27 FCC ID: 2A6VF-AB01 TB-RF-074-1.0 3. -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT BLE 1Mbps 2402 Ant1 0.65 0.5 Pass NVNT BLE 1Mbps 2440 Ant1 0.66 0.5 Pass NVNT BLE 1Mbps 2480 Ant1 0.66 0.5 Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202211-0254-1 Page: 10 of 27 FCC ID: 2A6VF-AB01 TB-RF-074-1.0 Test Graphs -6dB Bandwidth NVNT BLE 1Mbps 2402MHz Ant1 -6dB Bandwidth NVNT BLE 1Mbps 2440MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202211-0254-1 Page: 11 of 27 FCC ID: 2A6VF-AB01 TB-RF-074-1.0 -6dB Bandwidth NVNT BLE 1Mbps 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202211-0254-1 Page: 12 of…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0254-1 Page: 1 of 32 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID: 2A6VF-AB01 Report No. : TBR-C-202211-0254-1 Applicant : Averia Electronics Inc. Equipment Under Test (EUT) EUT Name : Averia Beacon Model No. : AB01 Series Model No. : 2301 Brand Name : AVERIA Sample ID : RW-C-202211-0254-1-1# & RW-C-202211-0254-1-2# Receipt Date : 2023-05-23 Test Date : 2023-05-23 to 2023-06-16 Issue Date : 2023-06-19 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Witness Engineer : Wade. Lv Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202211-0254-1 Page: 2 of 32 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 7 1.4 Description of Support Units .............................................................................................. 7 1.5 Description of Test Mode .................................................................................................... 8 1.6 Description of Test Software Setting ................................................................................ 9 1.7 Measurement Uncertainty .................................................................................................. 9 1.8 Test Facility ......................................................................................................................... 10 2. TEST SUMMARY ..................................................................................................................... 11 3. TEST SOFTWARE ................................................................................................................... 11 4. TEST EQUIPMENT .................................................................................................................. 12 5. CONDUCTED EMISSION ....................................................................................................... 13 5.1 Test Standard and Limit .................................................................................................... 13 5.2 Test Setup ........................................................................................................................... 13 5.3 Test Procedure ................................................................................................................... 13 5.4 Deviation From Test Standard ......................................................................................... 14 5.5 EUT Operating Mode ........................................................................................................ 14 5.6 Test Data ............................................................................................................................. 14 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 15 6.1 Test Standard and Limit .................................................................................................... 15 6.2 Test Setup ........................................................................................................................... 16 6.3 Test Procedure ................................................................................................................... 17 6.4 Deviation From Test Standard ......................................................................................... 19 6.5 EUT Operating Mode ........................................................................................................ 19 6.6 Test Data ............................................................................................................................. 19 7. RESTRICTED BANDS REQUIREMENT ............................................................................. 20 7.1 Test Standard and Limit .................................................................................................... 20 7.2 Test Setup ........................................................................................................................... 20 7.3 Test Procedure ................................................................................................................... 21 7.4 Deviation From Test Standard ......................................................................................... 22 Report No.: TBR-C-202211-0254-1 Page: 3 of 32 TB-RF-074-1.0 7.5 EUT Operating Mode ........................................................................................................ 22 7.6 Test Data ............................................................................................................................. 22 8. BANDWIDTH TEST ................................................................................................................. 23 8.1 Test Standard and Limit .......................................…

Text truncated - open the document above for the full version.

version01 Averia Electronics Inc. Declaration concerning Antenna Specification It is hereby declared that the product Model No.: AB01, 2301 FCC ID: 2A6VF-AB01 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for PCB antenna type(s) described below: Antenna No. Model No. of antenna: Type of antenna: Gain of the antenna (Max.) Frequency range: Bluetooth LE AB01 PCB Antenna -5.09dBi for 2400-2500MHz; The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: Averia Electronics Inc. Address: 142W 57th Street, Floor 11, New York, NY 10019 Place: Gennady Spirin Date: 2023-6-19 Signature:

ReportNo.:RFI-LAB-RF-202305-EE23 QP030-E41 Page1of10 TestingReport CustomerName:AveriaElectronicsInc. ProductName:PCBantenna SampleModel:AB01 ReferenceStandard:GB/T9410-2008;ANSI/IEEEStd149-1979 IssueDate:2023.5.26 Engineer:Date: Auditor:Date: Approver:Date: ReportNo.:RFI-LAB-RF-202305-EE23 QP030-E41 Page2of10 Version VersionNo.DateDescriptionFormulateApproval A02023.5.26Forthefirsttime,formulateJacksonEason Contents 1.GeneralInformation.........................................................................................................................3 1.1Generalinformationoftestinginstitutions...........................................................................3 1.2Testingprinciple...................................................................................................................3 1.3Testequipment......................................................................................................................4 1.4Testenvironment...................................................................................................................4 1.5Statement..............................................................................................................................4 2.SampleInformation.........................................................................................................................5 2.1Clientinformation.................................................................................................................5 2.2DescriptionofEUT(S)..........................................................................................................5 2.3EUTappearance....................................................................................................................6 2.4EUTsetupphotooffreespaceOTAtesing..........................................................................6 3.TestResults......................................................................................................................................7 3.1Teststandard.........................................................................................................................7 3.2Testuncertainty.....................................................................................................................7 3.3Testdata................................................................................................................................8 3.3.1VSWRparameters.....................................................................................................8 3.3.2VSWRdata................................................................................................................8 3.3.3Typicalfreespaceefficiencyandgain......................................................................8 3.3.4Typicalfreespaceradiationpattern...........................................................................9 （Thefollowingisblank）..............................................................................................................10 ReportNo.:RFI-LAB-RF-202305-EE23 QP030-E41 Page3of10 1.GeneralInformation 1.1Generalinformationoftestinginstitutions Name ShenzhenRFI-LABCommunicationTechnologyCo.,Ltd. Address 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ Tel 13682621346 E-mail [email protected] Equipment AlltheequipmentusedinthereportisfixedinZoneB,WestSideof1/F,Building1, TingweiIndustrialPark,No.6LiufangRoad,Bao'anDistrict,Shenzhen 1.2Testingprinciple ReportNo.:RFI-LAB-RF-202305-EE23 QP030-E41 Page4of10 1.3Testequipment EquipmentModelNo.SerialNo.Manufacturer Calibration date Next calibration date OTATest System RayZone-5000 RFI-LAB-RF -D00 GTS2023.3.142025.3.13 Network Analyzer E5071C RFI-LAB-RF -D01 KEYSIGHT2023.5.112024.5.10 Network Analyzer E5071C RFI-LAB-RF -C02 KEYSIGHT2023.5.112024.5.10 1.4Testenvironment Temperature 24.3°C Humidity 58%RH Pressure 100.12kPa 1.5Statement (1)Thetestresultsinthereportareonlyapplicabletothetestedsamplesandthetestedsamples workundertheenvironmentdescribedinthereport. (2)OnlyShenzhenRFI-LABCommunicationTechnologyCo.,Ltd.havetherighttomodifythe report,andthemodificationinformationshallbeannotatedintherevisionform. (3)Anyobjectiontothisreportshallberaisedwithin30daysafterformalconfirmationofthe report. (4)Thisreportisinvalidifthereisanyevidencethatthesampleinformationprovidedisfalsified. (5)Thereportisinvalidwithoutthesignatureoftheauditorandapprover. ReportNo.:RFI-LAB-RF-202305-EE23 QP030-E41 Page5of10 2.SampleInformation 2.1Clientinformation Name AveriaElectronicsInc. Address 142W57thStreet,Floor11,NewYork,NY10019 Contacts / Tel / E-mail / Manufacturer / 2.2DescriptionofEUT(S) ProductName PCBantenna SampleModel AB01 AntennaSize / SerialNo. / AntennaType PCBAntenna TestItem VSWR;Antennagain;Efficiency;Radiationpattern FrequencyRange 2400-2500MHz ReceivedDate 2023.5.24 TestDate 2023.5.25 Remark / ReportNo.:RFI-LAB-RF-202305-EE23 QP030-E41 Page6of10 2.3EUTappearance 2.4EUTsetupphotooffreespaceOTAtesing Planform Frontview ReportNo.:RFI-LAB-RF-202305-EE23 QP030-E41 Page7of10 3.TestResults 3.1Teststandard NameParameterMethodStandardno. Mobile communication antenna Antennagain Genericspecification forantennasusedinthe mobilecommunications GB/T 9410-2008 Radiationpattern VSWR Antenna Radiationefficiency IEEEStandardTest ProceduresforAntennas ANSI/IEEEStd 149-1979 Gainanddirectivity 3.2Testuncertainty TheuncertaintywascalculatedonthebasisoftheGUMpublishedbyISO,usingthe inclusionfactorofK=2andthe95%confidenceleveltoexpresstheextended uncertainty. ItemUncertainty VSWR±0.3 Antennagain±0.72dB Radiationefficiency±0.72dB ReportNo.:RFI-LAB-RF-202305-EE23 QP030-E41 Page8of10 3.3Testdata 3.3.1VSWRparameters 3.3.2VSWRdata 3.3.3Typicalfreespaceefficiencyandgain Frequency/MHz 240024502500 VSWR 2.38973.75135.4285 Frequency/MHz 24002410242024302440245024602470248024902500 PeakGain/dBi -5.09-5.45-5.41-5.63-6.06-6.28-6.44-6.72-6.93-7.21-7.70 Efficiency/% 14.7313.9413.4512.8512.1311.3811.0310.439.048.197.50 Repor…

Text truncated - open the document above for the full version.

FCC ID: 2A6VF-AB01 TB-RF-074-1.0 Appendix V EUT Test Photographs Photo of Setup for Radiated Emission (Below 1 GHz) Photo of Setup for Radiated Emission (Above 1 GHz) FCC ID: 2A6VF-AB01 TB-RF-074-1.0 Photo of Setup for Radiated Emission (Above 1 GHz) -----END OF THE REPORT-----