2A6VX-S16Wireless Lavalier Microphone

Wireless Lavalier Microphone S16 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd. Room 402, No. 1, Gangbei Industrial Zone, Jixiang Community, Longcheng Street, Longgang District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09-20-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A6VX-S16 [Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Shi Meng)

Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd. Room 402, No. 1, Gangbei Industrial Zone, Jixiang Community, Longcheng Street, Longgang District, Shenzhen, China Date: Sep. 20, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2A6VX-S16 US Agent – Attestation Statement / Part 2.911(d)(7) [Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd.] certifies, that as of [Sep. 20, 2023], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2A6VX-S16. [Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd.], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd.] for FCC ID: 2A6VX-S16. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: [Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd.] Designated Agent: FCC US Agent, LLC Company Representative: [Shi Meng] Tel: +86-755-28295498 Email: [email protected] FRN: 0032412736 Designated Agent Representative: Tim Payne Signature: Signature:

Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd. Room 402, No. 1, Gangbei Industrial Zone, Jixiang Community, Longcheng Street, Longgang District, Shenzhen, China Sep. 25, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2A6VX-S16 Model Number: S16, S10, S17, S18, S21, S30, S32, S33, S35, S36, S38, S39, S50, S51, S52, S53, S55, S56, S57, S58, S59, S60, S61, S62, S63, S65, S66, S67, S68, S69, S70, S71, S72, S73, S75, S76, S77, S78, S79, S80, K6, K10, J20, Y51 To Whom It May Concern: We, The Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd. hereby declare that the models are identical except the model names. Except for the different above, no other modification is performed. Sincerely, Signature: Contact person: Shi Meng

Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd. Room 402, No. 1, Gangbei Industrial Zone, Jixiang Community, Longcheng Street, Longgang District, Shenzhen, China Agent Authorization Company: Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd. Address: Room 402, No. 1, Gangbei Industrial Zone, Jixiang Community, Longcheng Street, Longgang District, Shenzhen, China Product Name: Wireless Lavalier Microphone Model Number(s): S16, S10, S17, S18, S21, S30, S32, S33, S35, S36, S38, S39, S50, S51, S52, S53, S55, S56, S57, S58, S59, S60, S61, S62, S63, S65, S66, S67, S68, S69, S70, S71, S72, S73, S75, S76, S77, S78, S79, S80, K6, K10, J20, Y51 Product Description: Wireless Lavalier Microphone We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-09-25 Name: Shi Meng Company: Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd.

Report No.: AGC16001230901AP03 Page 1 of 7 EXTERNAL PHOTOS All VIEW OF EUT-1 All VIEW OF EUT-2 Report No.: AGC16001230901AP03 Page 2 of 7 Left TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC16001230901AP03 Page 3 of 7 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC16001230901AP03 Page 4 of 7 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.: AGC16001230901AP03 Page 5 of 7 Right TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC16001230901AP03 Page 6 of 7 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC16001230901AP03 Page 7 of 7 LEFT VIEW OF EUT RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 5mm&30mm FCC ID: 2A6VX-S16

Report No.: AGC16001230901AP03 Page 1 of 6 INTERNAL PHOTOS Left OPEN VIEW OF EUT INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC16001230901AP03 Page 2 of 6 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) 2.4G Antenna Report No.: AGC16001230901AP03 Page 3 of 6 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) Report No.: AGC16001230901AP03 Page 4 of 6 Right OPEN VIEW OF EUT INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC16001230901AP03 Page 5 of 6 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC16001230901AP03 Page 6 of 6 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) ****************************************End of Report************************************* 2.4G Antenna

Page 1 of 10 RF Exposure Report Report No.: AGC16001230901FH01 FCC ID : 2A6VX-S16 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless Lavalier Microphone BRAND NAME : N/A MODEL NAME : S16, S10, S17, S18, S21, S30, S32, S33, S35, S36, S38, S39, S50, S51, S52, S53, S55, S56, S57, S58, S59, S60, S61, S62, S63, S65, S66, S67, S68, S69, S70, S71, S72, S73, S75, S76, S77, S78, S79, S80, K6, K10, J20, Y51 APPLICANT : Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd. DATE OF ISSUE : Sep. 20, 2023 STANDARD(S) : FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC16001230901FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep. 20, 2023 Valid Initial Release Report No.: AGC16001230901FH01 Page 3 of 10 Table of Contents 1. General Information .......................................................................................................................................... 4 2. Product Information ........................................................................................................................................... 5 2.1 Product Technical Description ................................................................................................................. 5 3. Test Environment ............................................................................................................................................... 6 3.1 Address Of The Test Laboratory .............................................................................................................. 6 3.2 Test Facility .............................................................................................................................................. 6 3.3 Environmental Conditions ........................................................................................................................ 7 4. Portable Device Evaluation Method and Limit .................................................................................................. 8 5. Mobile Device Evaluation Method and Limit ..................................................................................................... 9 6. Measurement Results ..................................................................................................................................... 10 7. Measurement Evaluation ................................................................................................................................ 10 Report No.: AGC16001230901FH01 Page 4 of 10 1. General Information Applicant Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd. Address Room 402, No. 1, Gangbei Industrial Zone, Jixiang Community, Longcheng Street, Longgang District, Shenzhen Manufacturer Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd. Address Room 402, No. 1, Gangbei Industrial Zone, Jixiang Community, Longcheng Street, Longgang District, Shenzhen Factory Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd. Address Room 402, No. 1, Gangbei Industrial Zone, Jixiang Community, Longcheng Street, Longgang District, Shenzhen Product Designation Wireless Lavalier Microphone Brand Name N/A Test Model S16 Series Model(s) S10, S17, S18, S21, S30, S32, S33, S35, S36, S38, S39, S50, S51, S52, S53, S55, S56, S57, S58, S59, S60, S61, S62, S63, S65, S66, S67, S68, S69, S70, S71, S72, S73, S75, S76, S77, S78, S79, S80, K6, K10, J20, Y51 Difference Description All the same except for the model names. Date of receipt of test item Sep. 08, 2023 Date of Test Sep. 08, 2023 to Sep. 20, 2023 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note:The test results of this report relate only to the tested sample identified in this report. Prepared By Alan Duan (Project Engineer) Sep. 20, 2023 Reviewed By Calvin Liu (Reviewer) Sep. 20, 2023 Approved By Max Zhang (Authorized Officer) Sep. 20, 2023 Report No.: AGC16001230901FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz 2.4G: 2.402GHz ~ 2.480GHz Other: Hardware Version N9112-TX-V1.2 Software Version V1.0 Modulation Type GFSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation Chip Antenna Antenna Gain 2.5 dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC16001230901FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Fe…

Text truncated - open the document above for the full version.

深圳市迎丰天线技术有限公司 SHEN ZHEN YINGFENG ANTENNA TECHNOLOYCO.,LTD Prepared by : JIEXI Designed by : Jason Checked by : Jason Approved by：MR.FANG TITLE：3.2 x 1.6x 0.4(mm) WiFi/Bluetooth Ceramic Chip Antenna (YF300B-1) Engineering Specification DOCUMENT YF3216Y1P2G4501 REV. NO. C PAGE 1 OF 12 3.2X1.6X0.4 (mm) WiFi/Bluetooth Ceramic Chip Antenna (YF300B- 1) Engineering Specification 1. Product Number YF 3216 Y1 P 2G45 0 1 1 2 3 4 5 6 深圳市迎丰天线技术有限公司 SHEN ZHEN YINGFENG ANTENNA TECHNOLOYCO.,LTD Prepared by : JIEXI Designed by : Jason Checked by : Jason Approved by：MR.FANG TITLE：3.2 x 1.6x 0.4(mm) WiFi/Bluetooth Ceramic Chip Antenna (YF300B-1) Engineering Specification DOCUMENT YF3216Y1P2G4501 REV. NO. C PAGE 2 OF 12 2.Features *Stable and reliable in performances *Low temperature coefficient of frequency *Low profile, compact size *RoHS compliance *SMT processes compatible 3.Applications *Bluetooth earphone systems *Hand-held devices when WiFi /Bluetooth functions are needed, e.g., Smart phone. *IEEE802.11 b/g/n *ZigBee *Wireless PCMCIA cards or USB dongle 4.Description Yingfeng chip antenna series are specially designed for WiFi/Bluetooth applications. Based on yingfeng proprietary design and processes, this chip antenna has excellent stability and sensitivity to consistently provide high signal reception efficiency. 5.Electrical Specifications (80 x 40 mm 2 ground plane) 5-1. Electrical Table Characteristics Specifications Unit Outline Dimensions 3.2x1.6x0.4 mm Working Frequency 2400~2500 MHz VSWR 2 Max. Impedance 50  Polarization Linear Polarization Gain Peak 2.5(typical) dBi Efficiency 78 (typical) % 5-2. Return Loss & VSWR 深圳市迎丰天线技术有限公司 SHEN ZHEN YINGFENG ANTENNA TECHNOLOYCO.,LTD Prepared by : JIEXI Designed by : Jason Checked by : Jason Approved by：MR.FANG TITLE：3.2 x 1.6x 0.4(mm) WiFi/Bluetooth Ceramic Chip Antenna (YF300B-1) Engineering Specification DOCUMENT YF3216Y1P2G4501 REV. NO. C PAGE 3 OF 12 Return Loss (S 11 ) VSWR(S 11 ) 6. Antenna Dimensions & Test Board (unit: mm) a. Antenna Dimensions 深圳市迎丰天线技术有限公司 SHEN ZHEN YINGFENG ANTENNA TECHNOLOYCO.,LTD Prepared by : JIEXI Designed by : Jason Checked by : Jason Approved by：MR.FANG TITLE：3.2 x 1.6x 0.4(mm) WiFi/Bluetooth Ceramic Chip Antenna (YF300B-1) Engineering Specification DOCUMENT YF3216Y1P2G4501 REV. NO. C PAGE 4 OF 12 b. Test Board with Antenna 80 40 Unit: mm 7. Radiation Pattern (80 x 40 mm 2 ground plane) 7-1. 3D Gain Pattern @ 2442 MHz Z X Y 深圳市迎丰天线技术有限公司 SHEN ZHEN YINGFENG ANTENNA TECHNOLOYCO.,LTD Prepared by : JIEXI Designed by : Jason Checked by : Jason Approved by：MR.FANG TITLE：3.2 x 1.6x 0.4(mm) WiFi/Bluetooth Ceramic Chip Antenna (YF300B-1) Engineering Specification DOCUMENT YF3216Y1P2G4501 REV. NO. C PAGE 5 OF 12 7-2. 3D Efficiency Table Frequency( MHz) 2400 2410 2420 2430 2442 2450 2460 2470 2480 2490 2500 Efficiency (dB) -1.4 -1.0 -0.9 -0.7 -0.7 -0.8 -0.9 -1.1 -1.2 -1.3 -1.4 Efficiency (%) 72.8 73.7 74.3 74.4 75.5 75.0 74.0 73.6 73.1 72.6 71.5 Gain (dBi) 2.1 2.2 2.3 2.4 2.5 2.5 2.4 1.8 1.7 1.6 1.4 Y X Z Y X X Y Z 深圳市迎丰天线技术有限公司 SHEN ZHEN YINGFENG ANTENNA TECHNOLOYCO.,LTD Prepared by : JIEXI Designed by : Jason Checked by : Jason Approved by：MR.FANG TITLE：3.2 x 1.6x 0.4(mm) WiFi/Bluetooth Ceramic Chip Antenna (YF300B-1) Engineering Specification DOCUMENT YF3216Y1P2G4501 REV. NO. C PAGE 6 OF 12 7-3. 3D Efficiency vs. Frequency 8. Layout Guide a. Solder Land Pattern: Land pattern for soldering (gray marking areas) is as shown below. Depending on Customer’s requirement, matching circuit as shown below is also recommended. Efficiency vs. Frequency 50 60 70 80 90 100 2400 2410 2420 2430 2442 2450 2460 2470 2480 2490 2500 Frequency(MHz) Efficiency(%) 深圳市迎丰天线技术有限公司 SHEN ZHEN YINGFENG ANTENNA TECHNOLOYCO.,LTD Prepared by : JIEXI Designed by : Jason Checked by : Jason Approved by：MR.FANG TITLE：3.2 x 1.6x 0.4(mm) WiFi/Bluetooth Ceramic Chip Antenna (YF300B-1) Engineering Specification DOCUMENT YF3216Y1P2G4501 REV. NO. C PAGE 7 OF 12 Top View Bottom View Unit： mm 深圳市迎丰天线技术有限公司 SHEN ZHEN YINGFENG ANTENNA TECHNOLOYCO.,LTD Prepared by : JIEXI Designed by : Jason Checked by : Jason Approved by：MR.FANG TITLE：3.2 x 1.6x 0.4(mm) WiFi/Bluetooth Ceramic Chip Antenna (YF300B-1) Engineering Specification DOCUMENT YF3216Y1P2G4501 REV. NO. C PAGE 8 OF 12 9. Frequency tuning a. Chip antenna tuning scenario： b. Matching circuit：(Center frequency is about 2442 MHz @ 80 x 40 mm 2 ground plane) System Matching Circuit Component Location Description Vendor Toleranc e 1 1.2 pF* Murata (0402) ±0.1 pF 2 10PF* Murata(0402) ±0.5 PF 3 N/A* - - Fine tuning element 4 1.5 pF* Murata (0402) ±0.1 pF *Typical reference values which may need to be changed when circuit boards or part vendors are different. Matching circuit Feed 4. Fine tuning elemet 1 2 3 深圳市迎丰天线技术有限公司 SHEN ZHEN YINGFENG ANTENNA TECHNOLOYCO.,LTD Prepared by : JIEXI Designed by : Jason Checked by : Jason Approved by：MR.FANG TITLE：3.2 x 1.6x 0.4(mm) WiFi/Bluetooth Ceramic Chip Antenna (YF300B-1) Engineering Specification DOCUMENT YF3216Y1P2G4501 REV. NO. C PAGE 9 OF 12 c. Fine tuning element vs. Center frequency 10. Soldering Conditions a. Typical Soldering Profile for Lead-free Process Time 60-180s 60-150s 20- Pre- 150-200° 217°C 260° Temperature (°C) 深圳市迎丰天线技术有限公司 SHEN ZHEN YINGFENG ANTENNA TECHNOLOYCO.,LTD Prepared by : JIEXI Designed by : Jason Checked by : Jason Approved by：MR.FANG TITLE：3.2 x 1.6x 0.4(mm) WiFi/Bluetooth Ceramic Chip Antenna (YF300B-1) Engineering Specification DOCUMENT YF3216Y1P2G4501 REV. NO. C PAGE 10 OF 12 11. Packing (1) Quantity/Reel: 5000 pcs/Reel (2) Plastic tape: 深圳市迎丰天线技术有限公司 SHEN ZHEN YINGFENG ANTENNA TECHNOLOYCO.,LTD Prepared by : JIEXI Designed by : Jason Checked by : Jason Approved by：MR.FANG TITLE：3.2 x 1.6x 0.4(mm) WiFi/Bluetooth Ceramic Chip Antenna (YF300B-1) Engineering Specification DOCUMENT YF3216Y1P2G4501 REV. NO. C PAGE 11 OF 12 深圳市迎丰天线技术有限公司 SHEN ZHEN YINGFENG ANTENNA TECHNOLOYCO.,LTD Prepared by : JIEXI Designed by : Jason Checked by : Jason Approved by：MR.FA…

Text truncated - open the document above for the full version.

Page 1 of 50 FCC Test Report Report No.: AGC16001230901FR01 FCC ID : 2A6VX-S16 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless Lavalier Microphone BRAND NAME : N/A MODEL NAME : S16, S10, S17, S18, S21, S30, S32, S33, S35, S36, S38, S39, S50, S51, S52, S53, S55, S56, S57, S58, S59, S60, S61, S62, S63, S65, S66, S67, S68, S69, S70, S71, S72, S73, S75, S76, S77, S78, S79, S80, K6, K10, J20, Y51 APPLICANT : Shenzhen Shisuo Intelligent Electronic Technology Co. , Ltd. DATE OF ISSUE : Sep. 20, 2023 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC16001230901FR01 Page 2 of 50 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep. 20, 2023 Valid Initial Release Report No.: AGC16001230901FR01 Page 3 of 50 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ..................................................................................................................... 6 2.2 Test Frequency List ..................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ................................................................................................................. 7 2.4 Test Methodology......................................................................................................................................... 7 2.5 Special Accessories ..................................................................................................................................... 7 2.6 Equipment Modifications ............................................................................................................................. 7 2.7 Antenna Requirement .................................................................................................................................. 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of the Test Laboratory .................................................................................................................... 8 3.2 Test Facility .................................................................................................................................................. 8 3.3 Environmental Conditions ........................................................................................................................... 9 3.4 Measurement Uncertainty ........................................................................................................................... 9 3.5 List of Equipment Use ............................................................................................................................... 10 4.System Test Configuration ............................................................................................................................ 12 4.1 EUT Configuration ..................................................................................................................................... 12 4.2 EUT Exercise ............................................................................................................................................. 12 4.3 Configuration of Tested System ................................................................................................................ 12 4.4 Equipment Used In Tested System ........................................................................................................... 12 4.5 Summary of Test Results ........................................................................................................................... 13 5. Description of Test Modes ........................................................................................................................... 14 6. Duty Cycle Measurement ............................................................................................................................. 15 7. RF Output Power Measurement .................................................................................................................. 16 7.1 Provisions Applicable ................................................................................................................................. 16 7.2 Measurement Procedure ........................................................................................................................... 16 7.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 16 7.4 Measurement Result ................................................................................................................................. 17 8. 6dB Bandwidth Measurement ...................................................................................................................... 20 Report No.: AGC16001230901FR01 Page 4 of 50 8.1 Provisions Applicable ................................................................................................................................. 20 8.2 Measurement Procedure ........................................................................................................................... 20 8.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 20 8.4 Measurement Results .................................................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC16001230901AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC16001230901AP01 Page 2 of 2 RF CONDUCTED TEST SETUP ****************************************End of Report*************************************