2A6YA-AHP-200TINGBELL

AIN ELECTRONICS, INC. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: AIN ELECTRONICS, INC. Address: RM, 1020, Sicox Tower, 484, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, 13229, South Korea Product Name: TINGBELL FCC ID: 2A6YA-AHP-200 Model(s): AHP-200 2.911(d)(5)(i) Equipment Type We, AIN ELECTRONICS, INC. (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Jae gun, Ma Date: December 04, 2024 Title and Company name: Team Leader / AIN ELECTRONICS, INC. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

AIN ELECTRONICS, INC. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: AIN ELECTRONICS, INC. Address: RM, 1020, Sicox Tower, 484, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, 13229, South Korea Product Name: TINGBELL FCC ID: 2A6YA-AHP-200 Model(s): AHP-200 2.911(d)(5)(ii) Applicant filing We, AIN ELECTRONICS, INC. (“the applicant”) certify that, as of the date of the filing of the application, the applicant is is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Jae gun, Ma Date: December 04, 2024 Title and Company name: Team Leader / AIN ELECTRONICS, INC. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. AIN ELECTRONICS, INC. U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: December 3, 2024 Signed by (Printed Name/Title): Nathan Grinager / Co-President The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: AIN ELECTRONICS, INC. Grantee FRN: 0032428732 FCC ID: 2A6YA-AHP-200 Contact Name: Jae gun, Ma Street Address: RM, 1020, Sicox Tower, 484, Dunchon-daero, Jungwon-gu City/Province/Zip: Seongnam-si, Gyeonggi-do, 13229, South Korea Telephone No:+ 82-31-777-9570 Email: [email protected] Applicant Signature: Date: December 3, 2024 Signed by (Printed Name/Title): Jae gun, Ma / Team Leader

Letter of Authorization Company: AIN ELECTRONICS, INC. Address: RM, 1020, Sicox Tower, 484, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, 13229, South Korea Product Name: TINGBELL Model Number: AHP-200 FCC Identifier: 2A6YA-AHP-200 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Jae gun, Ma Date: December 04, 2024 Title: Team Leader Signature of applicant:

AIN ELECTRONICS, INC. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 04, 2024 Subject; Request for Confidentiality FCC ID: 2A6YA-AHP-200 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Jae gun, Ma Title: Team Leader

Page 1 of 6 Report No.: OT-24D-RWD-011 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) EMF TEST REPORT Test Report No. : OT-24D-RWD-011 Reception No. : 2410003844 Applicant : AIN ELECTRONICS, INC. Address : RM, 1020, Sicox Tower, 484, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi- do, 13229, South Korea Manufacturer : AIN ELECTRONICS, INC. Address : RM, 1020, Sicox Tower, 484, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi- do, 13229, South Korea Type of Equipment : TINGBELL FCC ID. : 2A6YA-AHP-200 Model Name : AHP-200 Multiple Model Name : N/A Serial number : N/A Total page of Report : 6 pages (including this page) Date of Incoming : November 04, 2024 Date of issue : December 04, 2024 SUMMARY The equipment complies with the regulation; FCC CFR 47 PART 2.1093 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. This report is not correlated with the "KS Q ISO/IEC 17025 and KOLAS accreditation" of Korean Laboratory Accreditation Scheme. Tested by Yun-Bok, Wi / Engineer ONETECH Corp. Reviewed by Tae-Ho, Kim / Chief Engineer ONETECH Corp. Approved by Jae-Ho, Lee / Chief Engineer ONETECH Corp. Page 2 of 6 Report No.: OT-24D-RWD-011 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) CONTENTS Page 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 4 2. GENERAL INFORMATION ............................................................................................................................................ 5 2.1 PRODUCT DESCRIPTION ................................................................................................................................................. 5 2.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT. ................................................................ 5 3. EUT MODIFICATIONS .................................................................................................................................................... 5 4. RF EXPOSURE EVALUATION ...................................................................................................................................... 6 4.1 RF EXPOSURE CALCULATION ....................................................................................................................................... 6 4.2 EUT DESCRIPTION ......................................................................................................................................................... 6 4.3 CALCULATED MPE SAFE DISTANCE............................................................................................................................. 6 Page 3 of 6 Report No.: OT-24D-RWD-011 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) Revision History Rev. No. Issue Report No. Issued Date Revisions Section Affected 0 OT-24D-RWD-011 December 04, 2024 Initial Release All Page 4 of 6 Report No.: OT-24D-RWD-011 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) 1. VERIFICATION OF COMPLIANCE Applicant : AIN ELECTRONICS, INC. Address : RM, 1020, Sicox Tower, 484, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, 13229, South Korea Contact Person : Jae gun, Ma / Team Leader Telephone No. : +82-31-777-9570 FCC ID : 2A6YA-AHP-200 Model Name : AHP-200 Brand Name : - Serial Number : N/A Date : December 04, 2024 EQUIPMENT CLASS DTS – DIGITAL TRNSMISSION SYSTEM E.U.T. DESCRIPTION TINGBELL THIS REPORT CONCERNS Original Grant MEASUREMENT PROCEDURES KDB 447498 D01 General RF Exposure Guidance v06 TYPE OF EQUIPMENT TESTED Pre-Production KIND OF EQUIPMENT AUTHORIZATION REQUESTED Certification Modifications on the Equipment to Achieve Compliance None -. The above equipment was tested by ONETECH Corp. for compliance with the requirement set forth in the FCC Rules and Regulations. This said equipment in the configuration described in this report, shows the maximum emission levels emanating from equipment are within the compliance requirements. Page 5 of 6 Report No.: OT-24D-RWD-011 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) 2. GENERAL INFORMATION 2.1 Product Description The AIN ELECTRONICS, INC., Model AHP-200 (referred to as the EUT in this report) is a TINGBELL. The product specification described herein was obtained from product data sheet or user’s manual. DEVICE TYPE TINGBELL Temperature Range -20 °C ~ +50 °C OPERATING FREQUENCY 2 402 MHz ~ 2 480 MHz MAX. RF OUTPUT POWER -5.46 dBm NUMBER OF CHANNEL 40 Channel MODULATION TYPE DSSS Modulation(GFSK) ANTENNA TYPE Chip Antenna ANTENNA GAIN 0.34 dBi List of each Osc. or crystal Freq.(Freq. >= 1 MHz) 32 MHz Rated Supply Voltage DC 3.70 V 2.2 Alternative type(s)/model(s); also covered by this test report. -. None 3. EUT MODIFICATIONS -. None Page 6 of 6 Report No.: OT-24D-RWD-011 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ON…

Text truncated - open the document above for the full version.

Appendix Data 1. DUTY CYCLE ........................................................................................................................................... 2 2. MINIMUM 6 DB BANDWIDTH ............................................................................................................. 4 3. OCCUPIED BANDWIDTH ..................................................................................................................... 7 4. MAXIMUM PEAK OUTPUT POWER ............................................................................................... 10 5. POWER SPECTRUL DENSITY ........................................................................................................... 13 6. 100 KHZ BANDWIDTH OUTSIDE THE FREQUENCY BAND ...................................................... 16 7. RADIATED EMISSION (RESTRICTED BAND & HARMONIC) ................................................... 22 1 / 37 Test ItemNo.ModeChannel Duty Cycle 1 LE 1 Mbps 2440 Verdict Pass Test BandBluetooth LE AntennaAnt 0 Test Parameters for Channel Bandwidths 2 / 37 1 Duty Cycle 3 / 37 Test ItemNo.ModeChannel 1 LE 1 Mbps 2402 2 LE 1 Mbps 2440 3 LE 1 Mbps 2480 Test BandBluetooth LE AntennaAnt 0 Test Parameters for Channel Bandwidths 6dB Bandwidth Verdict Pass Pass Pass 4 / 37 1 2 6dB Bandwidth 6dB Bandwidth 5 / 37 3 6dB Bandwidth 6 / 37 Test ItemNo.ModeChannel 1 LE 1 Mbps 2402 2 LE 1 Mbps 2440 3 LE 1 Mbps 2480 99% Occupied Bandwidth Test BandBluetooth LE AntennaAnt 0 Test Parameters for Channel Bandwidths Verdict Pass Pass Pass 7 / 37 1 2 99% Occupied Bandwidth 99% Occupied Bandwidth 8 / 37 3 99% Occupied Bandwidth 9 / 37 Test ItemNo.ModeChannel 1 LE 1 Mbps 2402 2 LE 1 Mbps 2440 3 LE 1 Mbps 2480 Output Power Test BandBluetooth LE AntennaAnt 0 Test Parameters for Channel Bandwidths Verdict Pass Pass Pass 10 / 37 1 2 Output Power Output Power 11 / 37 3 Output Power 12 / 37 Test ItemNo.ModeChannel 1 LE 1 Mbps 2402 2 LE 1 Mbps 2440 3 LE 1 Mbps 2480 Power Spectrul Density Test BandBluetooth LE AntennaAnt 0 Test Parameters for Channel Bandwidths Verdict Pass Pass Pass 13 / 37 1 2 Power Spectrul Density Power Spectrul Density 14 / 37 3 Power Spectrul Density 15 / 37 Test ItemNo.ModeChannel 1 LE 1 Mbps 2402 2 LE 1 Mbps 2440 3 LE 1 Mbps 2480 100 kHz Bandwidth Test BandBluetooth LE AntennaAnt 0 Test Parameters for Channel Bandwidths Verdict Pass Pass Pass 16 / 37 1 1.1 100 kHz Bandwidth 100 kHz Bandwidth 17 / 37 1.2 2 100 kHz Bandwidth 100 kHz Bandwidth 18 / 37 2.1 2.2 100 kHz Bandwidth 100 kHz Bandwidth 19 / 37 3 3.1 100 kHz Bandwidth 100 kHz Bandwidth 20 / 37 3.2 100 kHz Bandwidth 21 / 37 Bluetooth_LE 1Mbps 2402.0 F1 RestrictedBand Horizontal AVG 2402.0 F1 RestrictedBand Horizontal PEAK 22 / 37 2402.0 F1 RestrictedBand Vertical AVG 2402.0 F1 RestrictedBand Vertical PEAK 23 / 37 2480.0 F3 RestrictedBand Horizontal AVG 2480.0 F3 RestrictedBand Horizontal PEAK 24 / 37 2480.0 F3 RestrictedBand Vertical AVG 2480.0 F3 RestrictedBand Vertical PEAK 25 / 37 F1 X2 4804.0 Harmonic Horizontal PEAK F1 X2 4804.0 Harmonic Horizontal AVG 26 / 37 F1 X2 4804.0 Harmonic Vertical AVG F1 X2 4804.0 Harmonic Vertical PEAK 27 / 37 F1 X3 7206.0 Harmonic Horizontal AVG F1 X3 7206.0 Harmonic Horizontal PEAK 28 / 37 F1 X3 7206.0 Harmonic Vertical AVG F1 X3 7206.0 Harmonic Vertical PEAK 29 / 37 F2 X2 4880.0 Harmonic Horizontal AVG F2 X2 4880.0 Harmonic Horizontal PEAK 30 / 37 F2 X2 4880.0 Harmonic Vertical AVG F2 X2 4880.0 Harmonic Vertical PEAK 31 / 37 F2 X3 7320.0 Harmonic Horizontal AVG F2 X3 7320.0 Harmonic Horizontal PEAK 32 / 37 F2 X3 7320.0 Harmonic Vertical AVG F2 X3 7320.0 Harmonic Vertical PEAK 33 / 37 F3 X2 4960.0 Harmonic Horizontal PEAK F3 X2 4960.0 Harmonic Horizontal AVG 34 / 37 F3 X2 4960.0 Harmonic Vertical AVG F3 X2 4960.0 Harmonic Vertical PEAK 35 / 37 F3 X3 7440.0 Harmonic Horizontal AVG F3 X3 7440.0 Harmonic Horizontal PEAK 36 / 37 F3 X3 7440.0 Harmonic Vertical AVG F3 X3 7440.0 Harmonic Vertical PEAK 37 / 37

Page 1 of 24 Report No.: OT-24D-RWD-010 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) RADIO PERFORMANCE TEST REPORT Test Report No. : OT-24D-RWD-010 Reception No. : 2410003844 Applicant : AIN ELECTRONICS, INC. Address : RM, 1020, Sicox Tower, 484, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi- do, 13229, South Korea Manufacturer : AIN ELECTRONICS, INC. Address : RM, 1020, Sicox Tower, 484, Dunchon-daero, Jungwon-gu, Seongnam-si, Gyeonggi- do, 13229, South Korea Type of Equipment : TINGBELL FCC ID. : 2A6YA-AHP-200 Model Name : AHP-200 Multiple Model Name : N/A Serial number : N/A Total page of Report : 24 pages (including this page) Date of Incoming : November 04, 2024 Date of issue : December 04, 2024 SUMMARY The equipment complies with the regulation; FCC PART 15 SUBPART C Section 15.247 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. This report is not correlated with the "KS Q ISO/IEC 17025 and KOLAS accreditation" of Korean Laboratory Accreditation Scheme. Tested by Yun-Bok, Wi / Engineer ONETECH Corp. Reviewed by Tae-Ho, Kim / Chief Engineer ONETECH Corp. Approved by Jae-Ho, Lee / Chief Engineer ONETECH Corp. Page 2 of 24 Report No.: OT-24D-RWD-010 It should not be reproduced except in full, without the written approval of ONETECH Corp. OTC-TRF-RF-001(0) ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) CONTENTS Page 1. VERIFICATION OF COMPLIANCE ............................................................................................................................. 5 2. TEST SUMMARY .............................................................................................................................................................. 6 2.1 TEST ITEMS AND RESULTS ............................................................................................................................................. 6 2.2 ADDITIONS, DEVIATIONS, EXCLUSIONS FROM STANDARDS ........................................................................................... 6 2.3 RELATED SUBMITTAL(S) / GRANT(S) ............................................................................................................................ 6 2.4 PURPOSE OF THE TEST ................................................................................................................................................... 6 2.5 TEST METHODOLOGY .................................................................................................................................................... 6 2.6 TEST FACILITY ............................................................................................................................................................... 6 3. GENERAL INFORMATION ............................................................................................................................................ 7 3.1 PRODUCT DESCRIPTION ................................................................................................................................................. 7 3.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT. ................................................................ 7 4. EUT MODIFICATIONS .................................................................................................................................................... 7 5. SYSTEM TEST CONFIGURATION ............................................................................................................................... 8 5.1 JUSTIFICATION ............................................................................................................................................................... 8 5.2 PERIPHERAL EQUIPMENT .............................................................................................................................................. 8 5.3 MODE OF OPERATION DURING THE TEST ...................................................................................................................... 8 5.4 CONFIGURATION OF TEST SYSTEM ............................................................................................................................... 9 5.5 ANTENNA REQUIREMENT .............................................................................................................................................. 9 6. MEASUREMENT UNCERTAINTY ................................................................................................................................ 9 7. PRELIMINARY TEST .................................................................................................................................................... 10 7.1 AC POWER LINE CONDUCTED EMISSIONS TESTS ....................................................................................................... 10 7.2 GENERAL RADIATED EMISSIONS TESTS ..................................................................................................................... 10 8. MINIMUM 6 dB BANDWIDTH ..................................................................................................................................... 11 8.1 OPERATING ENVIRONMENT ......................................................................................................................................... 11 8.2 TEST SET-UP ................................................................................................................................................................. 11 8.3 TEST DATE .....................................................................…

Text truncated - open the document above for the full version.