2A6YW-GT-MGA-23-in-1 Wireless Charger

1. Watch wireless charging position 2. Mobile phone wireless charging position 3. Earbuds case wireless charging position 4. 140°(Max.) foldable design 5. 180°(Max.) foldable design 6. 180°(Max.) foldable design 7. Power input port 8. LED Indicator TRIO FLEX USB-C TO USB-C 4FT USER MANUAL PD POWER ADAPTER Input: 100-240V~50/60Hz User Guide TRIO FLEX GT-MGA-2 Model Package Contents Product Diagram How to Use Step1: Please open the 3-in-1 foldable wireless charger and pull out the watch wireless charging position; Step2: Please connect one end of the USB-C cable to product power input port, the other end to a power adapter; Step3: Please place your devices to corresponding wireless charging positions for charging. Note: Specifications If you're experiencing interrupted or slow charging, check the following: 1. The back of your phone should not have any metal, pop sockets, or credit cards. 2. If you're using an iphone 12 or below version or a other branded phone, please put the phone in the center of the charging surface (this lets the charging coil in your phone line up with the one inside the wireless charger). 3. Phone cases should be no thicker than 6mm for effective charging. 4. Check whether the adapter is QC3.0/ PD3.0 fast charger. If you are using the recommended wireless charger with the QC3.0/ PD3.0 adapter and have removed any potential charging obstructions, but are still experiencing issues, please try following steps: 1. Replacing the cable connecting to your wireless charger. 2. Unplug the adapter and reinsert it. 3. Please feel free to contact our support team for solving problem. Trouble Shooting Compatible Devices Compatible Devices Model iPhone17 Series (Pro, Pro Max, etc.) iPhone16 Series (Pro, Pro Max, etc.) iPhone15 Series (Pro, Pro Max, etc.) iPhone14 Series (Pro, Pro Max, etc.) 1. Please use the power supply voltage as specified (AC 100-240V). 2. Please use a mobile phone case with a thickness of less than 6MM. 3. If you need to clean the charger, please make sure it is not connected power supply. 4. Applies to iphone 12 series and above mobile phones perfectly. 5. Wireless foldable charging supports a maximum output of 15W. 6. Due to the magnetic attraction, there may be imprints in the joint area of wireless charger, which can be wiped off with an alcohol cotton pad. 7. It is recommended that uses with the included power adapter and USB-C charging cable for better charging performance. 8. Do not disassemble, repair, modify on your own and do not drop this product. 9. Do not use or store this product in highly humid or moist places, direct sunlight, dense dust, or in high temperatures such as in a car under the sun or near a heater. 10. This product is non-waterproof. 11. Keep out of reach of children. 12. If any abnormality like smoking, odor, deformation, etc. occurs in this product, stop using it immediately. Cautions FCC Warning Statement ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to Made in China Model Input Output Transmission Distance Fast Charging Protocol Supported GT-MGA-2 9.0V 3.0A(27.0W), 12.0V 3.0A(36.0W) 3.0Wfor Watch) 5.0W (for Earphone charging case) 15.0W Max. (for Mobile phone) ≤ 6mm QC2.0/ QC3.0/ PD/ Qi2.0 ① ② ③ ⑦ ④ ⑤ ⑥ ⑧ WEEE Compliance DO not to dispose of product as unsorted municipal waste and to collect such WEEE separately, for proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge. Please contact your local authority for further details of your nearest designated collection station. 06 the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Indicator Status Indicator Status Blue Light On for 3 Seconds and Off Breath Blue Light Constant Blue Light Quick Flash Blue Light Off Charging Status Connecting the Power Supply Charging Being Fully Charged Foreign Object Detection Function Stand by Smart Watch Earbuds Apple Watch 2 - 11, UItra, etc. All Airpods/Earbuds with wireless charging case Smart Phone Please place your charging devices centrally. 0203040501 Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installd and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference toradio ortelevisionreception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. 70mm 100mm

Rev 1/26/2023 DOYAN LLC Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: May 19, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A6YW-GT-MGA-2 [DOYAN LLC] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [DOYAN LLC] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Bdoyan Adam Rev 1/26/2023 DOYAN LLC Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: May 19, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A6YW-GT-MGA-2 [DOYAN LLC] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Bdoyan Adam

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: DOYAN LLC Address: 656 Dark Star Ave, Columbus, OH 43230, USA FRN: 0032430191 Contact Name: Bdoyan Adam Telephone No: +1(646)346-9521 E-mail: [email protected] This letter is to confirm that the US Agent for Service of Process accepts responsibility to act as a local representative on behalf of DOYAN LLC The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Applicant: Company Name: DOYAN LLC Product Description: 3-in-1 Wireless Charger FRN: 0032430191 Grantee Code: 2A6YW FCC ID: 2A6YW-GT-MGA-2 Contact Name: Bdoyan Adam Address: 656 Dark Star Ave, Columbus, OH 43230, USA Telephone No: +1(646)346-9521 E-mail: [email protected] The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. This Agreement is valid until (Permanently valid). Date: 2026/5/19 Applicant’s Name: DOYAN LLC US Agent for Service of Process’s Name: DOYAN LLC Title: Manager Title: Manager Signature Signature

DOYAN LLC Family models declaration letter May 19, 2026 We DOYAN LLC Of 656 Dark Star Ave, Columbus, OH 43230, USA Declare under our sole responsibility that the product FCC ID: 2A6YW-GT-MGA-2 Product: 3-in-1 Wireless Charger Model Number: GT-MGA-2, GT-MWA-2, GT-MRA-2 All the models are the same circuit and module, except the colour and model No.. Bdoyan Adam / Manager E-mail : [email protected] Phone : +1(646)346-9521 Fax : +1(646)346-9521 Address : 656 Dark Star Ave, Columbus, OH 43230, USA

DOYAN LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 3, 2026 Subject; Request for Confidentiality FCC ID: 2A6YW-GT-MGA-2 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Bdoyan Adam Title: Manager

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 DOYAN LLC Date: May 19, 2026 Product Model Number: GT-MGA-2, GT-MWA-2, GT-MRA-2 FCC ID: 2A6YW-GT-MGA-2 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: +1(646)346-9521 On behalf of: DOYAN LLC

Ext Photos Model: GT-MGA-2 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

Ratio: 1:1 Process: Laser Engraving Ratio: 1:1 Process: Black ex terior product Screen printing / Transfer printing White ink Power In Power In 3-in-1 Wireless Charger NYTSTND TRIO FLEX Made in China Model: GT-MGA-2 Input: 9.0V=3.0A(27.0W),12.0V=3.0A(36.0W) Output: 3.0W (for Watch) / 5.0W(for Earphone charging case ) / 15.0W Max. (for Mobile Phone ) Transmission Distance: ≤ 6mm Fast Charging Protocol Supported : QC2.0 / QC3.0 / PD / Qi2.0 FCC ID: 2A6YW-GT-MGA-2 3-in-1 Wireless Charger NYTSTND TRIO FLEX Made in China Model: GT-MGA-2 Input: 9.0V=3.0A(27.0W),12.0V=3.0A(36.0W) Output: 3.0W (for Watch) / 5.0W(for Earphone charging case ) / 15.0W Max. (for Mobile Phone ) Transmission Distance: ≤ 6mm Fast Charging Protocol Supported : QC2.0 / QC3.0 / PD / Qi2.0 FCC ID: 2A6YW-GT-MGA-2

Int Photos Model: GT-MGA-2 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 ANT Earphone Photo 7 Photo 8 Photo 9 Photo 10 ANT Phone Photo 11 Photo 12 ANT Watch

- Page 1 of 12 - Report No.: HB20260513001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: 3-in-1 Wireless Charger Trade Mark: NYTSTND Model Number: GT-MGA-2 FCC ID: 2A6YW-GT-MGA-2 Prepared for DOYAN LLC 656 Dark Star Ave, Columbus, OH 43230, USA Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 12 - Report No.: HB20260513001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 7 2.1 TEST LABORATORY ..................................................................................................................................................... 7 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 2.4 TEST SOFTWARE ........................................................................................................................................................ 7 3 LIST OF TEST EQUIPMENT ................................................................................................................................ 8 4 RF EXPOSURE .................................................................................................................................................. 9 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 9 4.1.1. Limit ............................................................................................................................................................ 9 4.1.2. Test Procedures ........................................................................................................................................... 9 4.1.3. Test Setup .................................................................................................................................................... 9 4.1.4. Test Result ................................................................................................................................................... 9 5 PHOTOGRAPHS OF THE TEST SETUP............................................................................................................... 12 - Page 3 of 12 - Report No.: HB20260513001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : DOYAN LLC Address ................................. : 656 Dark Star Ave, Columbus, OH 43230, USA Manufacturer's Name .......... : DOYAN LLC Address ................................. : 656 Dark Star Ave, Columbus, OH 43230, USA Factory's Name .................... : HUNAN C-SMARTLINK TECHNOLOGY CO.,LTD Address ................................. : Building 5-6-7-8, Chengnan Electronic Information Industrial Park, Chenxi Industrial Development Zone, Chenxi County, Huaihua, Hunan Province Product description Product name ........................ : 3-in-1 Wireless Charger Model Number ....................... : GT-MGA-2 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : May 13, 2026~May 19, 2026 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : ( M i n g L i u) Authorized Signatory : (L e o S u) - Page 4 of 12 - Report No.: HB20260513001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Descriptio…

Text truncated - open the document above for the full version.

Fine Page1of4 FY-GZ001 SPECIFICATION FOR APPROVAL 客戶： CUSTOMER: 客 戶 料 號： CUST P/N: 料號： BESOFTP/N: 産 品 型 號： DESC: 日期： DATE: 版本： 21.7x40-11Ts-0.08x72P-8mm-CLB 2024/11/01 A.0 Version: 擬制 PREPARED BY 審核 CHECKED BY 批准 APPROVED BY 客戶承認 CUSTOMER APPROVE Feng Boqun Su Yanping Qian Limou Address: No. 702, Factory Building 1, Upper Shijia Village, Jiaoshi Community, Ma Tian Sub-district, Guangming District, Shenzhen City TEL：13824883512 Shenzhen Taosou Electronics Co., Ltd. Fine Page2of4 FY-GZ001 Version Change History 版本 Rev. 變 更 前 Before Change 變 更 後 After Change 更 改 日 期 Change Date 批准 Approved By A.0 new issue ---- 2024/11/01 Qian Limou Fine Page3of4 FY-GZ001 産 品 型 號： DESC 21.7x40-11Ts-0.08x72P-8mm-CLB 版本 Rev：A 0 客戶CUST: 淘软料号Fine P/N： 客户料号CUST P/N: 一、尺寸DIMENSION:(mm) A 20*0.8mm hard magnetic sheet is attached in the middle of the magnetic plate. 二、原理图SCHEMATIC DIAGRAM: 三、绕线参数Winding Specification: A 40.0±1 B 21.7±0.5 C 0.8±0.1 D1 11±1 D2 10±1 E 3-5mm F 42.5±0.5 G 11.0 ref H 2.0±0.2 Max I 5.3 ref Note: 1. The coil is attached with magnetic sheets. The size of the magnetic sheets is 42.5 ± 0.5 mm, the inner hole is 5.3 mm, and the thickness is 0.8 ± 0.1 mm, with a straight groove. 2. At the outlet position of the coil, a width of 6 mm ± 0.5 mm of heat-resistant adhesive tape is wound. 3. On the back of the magnetic sheet, a circular area with a diameter of 41.5 mm (ref) and an inner hole of 7.0 mm (ref) is attached with ordinary double-sided adhesive tape. 4. A 20 mm * 0.8 mm hard magnetic sheet is added in the middle of the coil. 序号 NO 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction 1S F Hot air line 0.08 * 72P 11TsCCW 四、电气特性ELECTRICAL CHARACTERISTICS: 温度TEMPERATURE : 25 ± 10 ° C ,湿 度RELATIVE HUMIDITY : 65 ± 20 % 序号 NO 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS 1IND.S-F 5.8uH ±20% Single coil100KHz/ 1.0V LCZ METER 1062B 2 IND. S-F 8.4uH (Min) with ±5% tolerance for the magnetic plate 100KHz/ 1.0VLCZ METER 1062B 3 Q值 S-F ≤90(ref) Add magnetic chips 100KHz/ 1.0VLCZ METER 1062B 4 DCRS-F ≤65mΩ LCZ METER 502 B 擬制 / 日期 PREPARED BY/DATE 審核 / 日期 CHECKED BY/DATE Feng Boqun 2024/11/01 Su Yanping 2024/11/01 Fine Page4of4 FY-GZ001 産 品 型 號： DESC 21.7x40-11Ts-0.08x72P-8mm-CLB 版本 Rev：A 0 客戶CUST: 淘软料号Fine P/N： 客户料号CUST P/N: 五、包装PACKONG: 5. 1包装图片Packing pictures: 5.2包装数量及规格Packing Quantity: 项目Item数量Quantity材料规格Material 盒Box350 Pcs370*265*55mm 箱Big Carton 1400 Pcs390*270*245mm 5.3包装以现有包装盘为参照标准，以实际出货包装为准,如有特需要求可以定制。 The packaging shall be based on the existing packing plate and the actual delivery package shall prevail. If there is any requirement, we can customize it. 六、材料清单Material list: 序号 numberMaterial name Description Manufacturer 1 Hot air line 0.08 * 72PHot air line 0.08 * 72P Dongguan Jinjieren Electronic Materials Co., Ltd. 2 Lead-free tin rodLead-free tin rod Shenzhen Daqin Xiyi Co., Ltd. 3 magnetic sheet Φ42.5*5.3*0.8mm Manganese-Zinc Hard Magnetic Sheet Guangzhou Ruijing New Materials Technology Co., Ltd. 4 glue 201 Glue Dongguan Feiqu Electronic Materials Co., Ltd. 5 high-temperature adhesive tape 6mm wide heat-resistant adhesive tape Dongguan Zhixing Tape New Materials Co., Ltd. 6 Hole-covered double-sided adhesive tape With tearable circular shape, diameter 41.5mm (ref), self-adhesive backing Shenzhen Hongweida Technology Co., Ltd. 7 Small magnetic disk 20 pieces of 0.8mm small magnetic discs Guangzhou Ruijing New Materials Technology Co., Ltd. 擬制 / 日期 PREPARED BY/DATE 審核 / 日期 CHECKED BY/DATE Feng Boqun 2024/11/01 Su Yanping 2024/11/01

Acknowledgment Letter Shenzhen Jiayucang Technology 26.25131-1 YZ-G25-7.6UH-3200GS-8MM 2024年10月8日 customer name： Customer P/N： Model： datelanded： supplier： Dongguan Jierestech Technology Co., Ltd. draw Review Approve Wang lizhi Deng xianggui Lu rusheng Dongguan Jierestech Technology Co., Ltd. Tel: Fax: 86+13632701380 Address: No. 152, Wanchang Road, Taogongling Village, Dalingshan Town, Dongguan City 一、Plan view diagram: Unit: MM 二、Product Parameter pin-out Path Turns Note 1 - 2 0.08*24P 13 Hot air twisted yarn 三、technical requirements 1.Fix the ends of the wires properly to prevent the wires from loosening or breaking. 2. Cut the excessively long wire ends according to the customer's requirements, tin them, and ensure that the tin coating depth is uniformly 2±1MM. 3. Apply an appropriate amount of white glue on the soft magnetic sheet, attach the coil, and during the process, keep the product surface clean and tidy. 4. The soft magnetic sheet used has a round hole and is undamaged. 5. Additional processing (as per customer requirements): Install a 7.65x2.0mm magnet in the middle round hole of the finished product, and attach a 513-13*13mm square double-sided adhesive on the back of the finished product, and then package. 審核 A C G K J I H M F L A B C D E F H I J 7.65±0.05 2.0±0.05 2±1 15±0.2 20.7±0.3 21±0.2 23.5±0.3 25±0.2 2.5±0.15 2.4±0.1 K 磁铁 1 2 1 2 8±1 L B D E 7.7±0.05 14.5±0.1 G M 四、electrical parameter 1.Inductance value, Q factor: PIN 1 — 2 = 7.6uH ±0.3UH Q Value≥25 The above inductance values are based on the Quanhua 1062A instrument, using 10KHZ/0.3Vrms as the standard or equivalent instrument. The Q value is based on the Quanhua 1062A instrument, using 100KHZ/0.3Vrms as the standard or equivalent instrument. 我司型號 五、bill of materials： No Name Material supplier Note 1 Hot air twisted yarn 0.08X24P Weihan or Dengtong 2 magnetic sheet G25 Castings Tiantong or Dengtong 3 Tin High-temperature environmental protection Qiandao or Dengtong 4 white glues BY882 Baoyue or Dengtong 5 strong magnet 7.65 * 2 (Strength greater than 3200 GS) Liansheng or Dengtong 6 Double-sided adhesive tape 513-13*13mm Honghui or D square 审核

- Page 1 of 35 - Report No.: HB20260513001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: 3-in-1 Wireless Charger Trade Mark: NYTSTND Model Number: GT-MGA-2 FCC ID: 2A6YW-GT-MGA-2 Prepared for DOYAN LLC 656 Dark Star Ave, Columbus, OH 43230, USA Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 35 - Report No.: HB20260513001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 6 1.4 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 6 1.5 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................. 7 3 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 8 4 LIST OF TEST EQUIPMENT .............................................................................................................................. 10 5 TEST ITEM AND RESULTS ............................................................................................................................... 12 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 12 5.2 CONDUCTED EMISSION ............................................................................................................................................. 13 5.3 RADIATED EMISSION ................................................................................................................................................ 17 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 22 6 PHOTOGRAPHS OF THE TEST SETUP............................................................................................................... 25 7 PHOTOGRAPHS OF THE EUT .......................................................................................................................... 27 - Page 3 of 35 - Report No.: HB20260513001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : DOYAN LLC Address ................................. : 656 Dark Star Ave, Columbus, OH 43230, USA Manufacturer's Name .......... : DOYAN LLC Address ................................. : 656 Dark Star Ave, Columbus, OH 43230, USA Factory's Name .................... : HUNAN C-SMARTLINK TECHNOLOGY CO.,LTD Address ................................. : Building 5-6-7-8, Chengnan Electronic Information Industrial Park, Chenxi Industrial Development Zone, Chenxi County, Huaihua, Hunan Province Product de…

Text truncated - open the document above for the full version.